Remove outdated templates and validation guides for device and experiment graph skills.

- Deleted `templates.md` for workstation code templates.
- Removed `SKILL.md` and `reference.md` for editing experiment graphs.
- Deleted `SKILL.md` for validating device implementations.

.conda/base/recipe.yaml

@@ -3,7 +3,7 @@
 
 package:
   name: unilabos
-  version: 0.10.18
+  version: 0.11.1
 
 source:
   path: ../../unilabos
@@ -54,7 +54,7 @@ requirements:
   - pymodbus
   - matplotlib
   - pylibftdi
-  - uni-lab::unilabos-env ==0.10.18
+  - uni-lab::unilabos-env ==0.11.1
 
 about:
   repository: https://github.com/deepmodeling/Uni-Lab-OS

.conda/environment/recipe.yaml

@@ -2,7 +2,7 @@
 
 package:
   name: unilabos-env
-  version: 0.10.18
+  version: 0.11.1
 
 build:
   noarch: generic

.conda/full/recipe.yaml

@@ -3,7 +3,7 @@
 
 package:
   name: unilabos-full
-  version: 0.10.18
+  version: 0.11.1
 
 build:
   noarch: generic
@@ -11,7 +11,7 @@ build:
 requirements:
   run:
   # Base unilabos package (includes unilabos-env)
-  - uni-lab::unilabos ==0.10.18
+  - uni-lab::unilabos ==0.11.1
   # Documentation tools
   - sphinx
   - sphinx_rtd_theme

.conda/scripts/post-link.bat

@@ -1,9 +0,0 @@
-@echo off
-setlocal enabledelayedexpansion
-
-REM upgrade pip
-"%PREFIX%\python.exe" -m pip install --upgrade pip
-
-REM install extra deps
-"%PREFIX%\python.exe" -m pip install paho-mqtt opentrons_shared_data
-"%PREFIX%\python.exe" -m pip install git+https://github.com/Xuwznln/pylabrobot.git

.conda/scripts/post-link.sh

@@ -1,9 +0,0 @@
-#!/usr/bin/env bash
-set -euxo pipefail
-
-# make sure pip is available
-"$PREFIX/bin/python" -m pip install --upgrade pip
-
-# install extra deps
-"$PREFIX/bin/python" -m pip install paho-mqtt opentrons_shared_data
-"$PREFIX/bin/python" -m pip install git+https://github.com/Xuwznln/pylabrobot.git

.cursor/rules/device-drivers.mdc

@@ -0,0 +1,328 @@
+---
+description: 设备驱动开发规范
+globs: ["unilabos/devices/**/*.py"]
+---
+
+# 设备驱动开发规范
+
+## 目录结构
+
+```
+unilabos/devices/
+├── virtual/           # 虚拟设备（用于测试）
+│   ├── virtual_stirrer.py
+│   └── virtual_centrifuge.py
+├── liquid_handling/   # 液体处理设备
+├── balance/           # 天平设备
+├── hplc/              # HPLC设备
+├── pump_and_valve/    # 泵和阀门
+├── temperature/       # 温度控制设备
+├── workstation/       # 工作站（组合设备）
+└── ...
+```
+
+## 设备类完整模板
+
+```python
+import asyncio
+import logging
+import time as time_module
+from typing import Dict, Any, Optional
+
+from unilabos.ros.nodes.base_device_node import BaseROS2DeviceNode
+
+
+class MyDevice:
+    """
+    设备类描述
+
+    Attributes:
+        device_id: 设备唯一标识
+        config: 设备配置字典
+        data: 设备状态数据
+    """
+
+    _ros_node: BaseROS2DeviceNode
+
+    def __init__(
+        self,
+        device_id: str = None,
+        config: Dict[str, Any] = None,
+        **kwargs
+    ):
+        """
+        初始化设备
+
+        Args:
+            device_id: 设备ID
+            config: 配置字典
+            **kwargs: 其他参数
+        """
+        # 兼容不同调用方式
+        if device_id is None and 'id' in kwargs:
+            device_id = kwargs.pop('id')
+        if config is None and 'config' in kwargs:
+            config = kwargs.pop('config')
+
+        self.device_id = device_id or "unknown_device"
+        self.config = config or {}
+        self.data = {}
+
+        # 从config读取参数
+        self.port = self.config.get('port') or kwargs.get('port', 'COM1')
+        self._max_value = self.config.get('max_value', 1000.0)
+
+        # 初始化日志
+        self.logger = logging.getLogger(f"MyDevice.{self.device_id}")
+
+        self.logger.info(f"设备 {self.device_id} 已创建")
+
+    def post_init(self, ros_node: BaseROS2DeviceNode):
+        """
+        ROS节点注入 - 在ROS节点创建后调用
+
+        Args:
+            ros_node: ROS2设备节点实例
+        """
+        self._ros_node = ros_node
+
+    async def initialize(self) -> bool:
+        """
+        初始化设备 - 连接硬件、设置初始状态
+
+        Returns:
+            bool: 初始化是否成功
+        """
+        self.logger.info(f"初始化设备 {self.device_id}")
+
+        try:
+            # 执行硬件初始化
+            # await self._connect_hardware()
+
+            # 设置初始状态
+            self.data.update({
+                "status": "待机",
+                "is_running": False,
+                "current_value": 0.0,
+            })
+
+            self.logger.info(f"设备 {self.device_id} 初始化完成")
+            return True
+
+        except Exception as e:
+            self.logger.error(f"初始化失败: {e}")
+            self.data["status"] = f"错误: {e}"
+            return False
+
+    async def cleanup(self) -> bool:
+        """
+        清理设备 - 断开连接、释放资源
+
+        Returns:
+            bool: 清理是否成功
+        """
+        self.logger.info(f"清理设备 {self.device_id}")
+
+        self.data.update({
+            "status": "离线",
+            "is_running": False,
+        })
+
+        return True
+
+    # ==================== 设备动作 ====================
+
+    async def execute_action(
+        self,
+        param1: float,
+        param2: str = "",
+        **kwargs
+    ) -> bool:
+        """
+        执行设备动作
+
+        Args:
+            param1: 参数1
+            param2: 参数2（可选）
+
+        Returns:
+            bool: 动作是否成功
+        """
+        # 类型转换和验证
+        try:
+            param1 = float(param1)
+        except (ValueError, TypeError) as e:
+            self.logger.error(f"参数类型错误: {e}")
+            return False
+
+        # 参数验证
+        if param1 > self._max_value:
+            self.logger.error(f"参数超出范围: {param1} > {self._max_value}")
+            return False
+
+        self.logger.info(f"执行动作: param1={param1}, param2={param2}")
+
+        # 更新状态
+        self.data.update({
+            "status": "运行中",
+            "is_running": True,
+        })
+
+        # 执行动作（带进度反馈）
+        duration = 10.0  # 秒
+        start_time = time_module.time()
+
+        while True:
+            elapsed = time_module.time() - start_time
+            remaining = max(0, duration - elapsed)
+            progress = min(100, (elapsed / duration) * 100)
+
+            self.data.update({
+                "status": f"运行中: {progress:.0f}%",
+                "remaining_time": remaining,
+            })
+
+            if remaining <= 0:
+                break
+
+            await self._ros_node.sleep(1.0)
+
+        # 完成
+        self.data.update({
+            "status": "完成",
+            "is_running": False,
+        })
+
+        self.logger.info("动作执行完成")
+        return True
+
+    # ==================== 状态属性 ====================
+
+    @property
+    def status(self) -> str:
+        """设备状态 - 自动发布为ROS Topic"""
+        return self.data.get("status", "未知")
+
+    @property
+    def is_running(self) -> bool:
+        """是否正在运行"""
+        return self.data.get("is_running", False)
+
+    @property
+    def current_value(self) -> float:
+        """当前值"""
+        return self.data.get("current_value", 0.0)
+
+    # ==================== 辅助方法 ====================
+
+    def get_device_info(self) -> Dict[str, Any]:
+        """获取设备信息"""
+        return {
+            "device_id": self.device_id,
+            "status": self.status,
+            "is_running": self.is_running,
+            "current_value": self.current_value,
+        }
+
+    def __str__(self) -> str:
+        return f"MyDevice({self.device_id}: {self.status})"
+```
+
+## 关键规则
+
+### 1. 参数处理
+
+所有动作方法的参数都可能以字符串形式传入，必须进行类型转换：
+
+```python
+async def my_action(self, value: float, **kwargs) -> bool:
+    # 始终进行类型转换
+    try:
+        value = float(value)
+    except (ValueError, TypeError) as e:
+        self.logger.error(f"参数类型错误: {e}")
+        return False
+```
+
+### 2. vessel 参数处理
+
+vessel 参数可能是字符串ID或字典：
+
+```python
+def extract_vessel_id(vessel: Union[str, dict]) -> str:
+    if isinstance(vessel, dict):
+        return vessel.get("id", "")
+    return str(vessel) if vessel else ""
+```
+
+### 3. 状态更新
+
+使用 `self.data` 字典存储状态，属性读取状态：
+
+```python
+# 更新状态
+self.data["status"] = "运行中"
+self.data["current_speed"] = 300.0
+
+# 读取状态（通过属性）
+@property
+def status(self) -> str:
+    return self.data.get("status", "待机")
+```
+
+### 4. 异步等待
+
+使用 ROS 节点的 sleep 方法：
+
+```python
+# 正确
+await self._ros_node.sleep(1.0)
+
+# 避免（除非在纯 Python 测试环境）
+await asyncio.sleep(1.0)
+```
+
+### 5. 进度反馈
+
+长时间运行的操作需要提供进度反馈：
+
+```python
+while remaining > 0:
+    progress = (elapsed / total_time) * 100
+    self.data["status"] = f"运行中: {progress:.0f}%"
+    self.data["remaining_time"] = remaining
+
+    await self._ros_node.sleep(1.0)
+```
+
+## 虚拟设备
+
+虚拟设备用于测试和演示，放在 `unilabos/devices/virtual/` 目录：
+
+- 类名以 `Virtual` 开头
+- 文件名以 `virtual_` 开头
+- 模拟真实设备的行为和时序
+- 使用表情符号增强日志可读性（可选）
+
+## 工作站设备
+
+工作站是组合多个设备的复杂设备：
+
+```python
+from unilabos.devices.workstation.workstation_base import WorkstationBase
+
+class MyWorkstation(WorkstationBase):
+    """组合工作站"""
+
+    async def execute_workflow(self, workflow: Dict[str, Any]) -> bool:
+        """执行工作流"""
+        pass
+```
+
+## 设备注册
+
+设备类开发完成后，需要在注册表中注册：
+
+1. 创建/编辑 `unilabos/registry/devices/my_category.yaml`
+2. 添加设备配置（参考 `virtual_device.yaml`）
+3. 运行 `--complete_registry` 自动生成 schema

.cursor/rules/protocol-development.mdc

@@ -0,0 +1,240 @@
+---
+description: 协议编译器开发规范
+globs: ["unilabos/compile/**/*.py"]
+---
+
+# 协议编译器开发规范
+
+## 概述
+
+协议编译器负责将高级实验操作（如 Stir、Add、Filter）编译为设备可执行的动作序列。
+
+## 文件命名
+
+- 位置: `unilabos/compile/`
+- 命名: `{operation}_protocol.py`
+- 示例: `stir_protocol.py`, `add_protocol.py`, `filter_protocol.py`
+
+## 协议函数模板
+
+```python
+from typing import List, Dict, Any, Union
+import networkx as nx
+import logging
+
+from .utils.unit_parser import parse_time_input
+from .utils.vessel_parser import extract_vessel_id
+
+logger = logging.getLogger(__name__)
+
+
+def generate_{operation}_protocol(
+    G: nx.DiGraph,
+    vessel: Union[str, dict],
+    param1: Union[str, float] = "0",
+    param2: float = 0.0,
+    **kwargs
+) -> List[Dict[str, Any]]:
+    """
+    生成{操作}协议序列
+
+    Args:
+        G: 物理拓扑图 (NetworkX DiGraph)
+        vessel: 容器ID或Resource字典
+        param1: 参数1（支持字符串单位，如 "5 min"）
+        param2: 参数2
+        **kwargs: 其他参数
+
+    Returns:
+        List[Dict]: 动作序列
+
+    Raises:
+        ValueError: 参数无效时
+    """
+    # 1. 提取 vessel_id
+    vessel_id = extract_vessel_id(vessel)
+
+    # 2. 验证参数
+    if not vessel_id:
+        raise ValueError("vessel 参数不能为空")
+
+    if vessel_id not in G.nodes():
+        raise ValueError(f"容器 '{vessel_id}' 不存在于系统中")
+
+    # 3. 解析参数（支持单位）
+    parsed_param1 = parse_time_input(param1)  # "5 min" -> 300.0
+
+    # 4. 查找设备
+    device_id = find_connected_device(G, vessel_id, device_type="my_device")
+
+    # 5. 生成动作序列
+    action_sequence = []
+
+    action = {
+        "device_id": device_id,
+        "action_name": "my_action",
+        "action_kwargs": {
+            "vessel": {"id": vessel_id},  # 始终使用字典格式
+            "param1": float(parsed_param1),
+            "param2": float(param2),
+        }
+    }
+    action_sequence.append(action)
+
+    logger.info(f"生成协议: {len(action_sequence)} 个动作")
+    return action_sequence
+
+
+def find_connected_device(
+    G: nx.DiGraph,
+    vessel_id: str,
+    device_type: str = ""
+) -> str:
+    """
+    查找与容器相连的设备
+
+    Args:
+        G: 拓扑图
+        vessel_id: 容器ID
+        device_type: 设备类型关键字
+
+    Returns:
+        str: 设备ID
+    """
+    # 查找所有匹配类型的设备
+    device_nodes = []
+    for node in G.nodes():
+        node_class = G.nodes[node].get('class', '') or ''
+        if device_type.lower() in node_class.lower():
+            device_nodes.append(node)
+
+    # 检查连接
+    if vessel_id and device_nodes:
+        for device in device_nodes:
+            if G.has_edge(device, vessel_id) or G.has_edge(vessel_id, device):
+                return device
+
+    # 返回第一个可用设备
+    if device_nodes:
+        return device_nodes[0]
+
+    # 默认设备
+    return f"{device_type}_1"
+```
+
+## 关键规则
+
+### 1. vessel 参数处理
+
+vessel 参数可能是字符串或字典，需要统一处理：
+
+```python
+def extract_vessel_id(vessel: Union[str, dict]) -> str:
+    """提取vessel_id"""
+    if isinstance(vessel, dict):
+        # 可能是 {"id": "xxx"} 或完整 Resource 对象
+        return vessel.get("id", list(vessel.values())[0].get("id", ""))
+    return str(vessel) if vessel else ""
+```
+
+### 2. action_kwargs 中的 vessel
+
+始终使用 `{"id": vessel_id}` 格式传递 vessel：
+
+```python
+# 正确
+"action_kwargs": {
+    "vessel": {"id": vessel_id},  # 字符串ID包装为字典
+}
+
+# 避免
+"action_kwargs": {
+    "vessel": vessel_resource,  # 不要传递完整 Resource 对象
+}
+```
+
+### 3. 单位解析
+
+使用 `parse_time_input` 解析时间参数：
+
+```python
+from .utils.unit_parser import parse_time_input
+
+# 支持格式: "5 min", "1 h", "300", "1.5 hours"
+time_seconds = parse_time_input("5 min")  # -> 300.0
+time_seconds = parse_time_input(120)      # -> 120.0
+time_seconds = parse_time_input("1 h")    # -> 3600.0
+```
+
+### 4. 参数验证
+
+所有参数必须进行验证和类型转换：
+
+```python
+# 验证范围
+if speed < 10.0 or speed > 1500.0:
+    logger.warning(f"速度 {speed} 超出范围，修正为 300")
+    speed = 300.0
+
+# 类型转换
+param = float(param) if not isinstance(param, (int, float)) else param
+```
+
+### 5. 日志记录
+
+使用项目日志记录器：
+
+```python
+logger = logging.getLogger(__name__)
+
+def generate_protocol(...):
+    logger.info(f"开始生成协议...")
+    logger.debug(f"参数: vessel={vessel_id}, time={time}")
+    logger.warning(f"参数修正: {old_value} -> {new_value}")
+```
+
+## 便捷函数
+
+为常用操作提供便捷函数：
+
+```python
+def stir_briefly(G: nx.DiGraph, vessel: Union[str, dict],
+                speed: float = 300.0) -> List[Dict[str, Any]]:
+    """短时间搅拌（30秒）"""
+    return generate_stir_protocol(G, vessel, time="30", stir_speed=speed)
+
+def stir_vigorously(G: nx.DiGraph, vessel: Union[str, dict],
+                   time: str = "5 min") -> List[Dict[str, Any]]:
+    """剧烈搅拌"""
+    return generate_stir_protocol(G, vessel, time=time, stir_speed=800.0)
+```
+
+## 测试函数
+
+每个协议文件应包含测试函数：
+
+```python
+def test_{operation}_protocol():
+    """测试协议生成"""
+    # 测试参数处理
+    vessel_dict = {"id": "flask_1", "name": "反应瓶1"}
+    vessel_id = extract_vessel_id(vessel_dict)
+    assert vessel_id == "flask_1"
+
+    # 测试单位解析
+    time_s = parse_time_input("5 min")
+    assert time_s == 300.0
+
+
+if __name__ == "__main__":
+    test_{operation}_protocol()
+```
+
+## 现有协议参考
+
+- `stir_protocol.py` - 搅拌操作
+- `add_protocol.py` - 添加物料
+- `filter_protocol.py` - 过滤操作
+- `heatchill_protocol.py` - 加热/冷却
+- `separate_protocol.py` - 分离操作
+- `evaporate_protocol.py` - 蒸发操作

.cursor/rules/registry-config.mdc

@@ -0,0 +1,319 @@
+---
+description: 注册表配置规范 (YAML)
+globs: ["unilabos/registry/**/*.yaml"]
+---
+
+# 注册表配置规范
+
+## 概述
+
+注册表使用 YAML 格式定义设备和资源类型，是 Uni-Lab-OS 的核心配置系统。
+
+## 目录结构
+
+```
+unilabos/registry/
+├── devices/              # 设备类型注册
+│   ├── virtual_device.yaml
+│   ├── liquid_handler.yaml
+│   └── ...
+├── device_comms/         # 通信设备配置
+│   ├── communication_devices.yaml
+│   └── modbus_ioboard.yaml
+└── resources/            # 资源类型注册
+    ├── bioyond/
+    ├── organic/
+    ├── opentrons/
+    └── ...
+```
+
+## 设备注册表格式
+
+### 基本结构
+
+```yaml
+device_type_id:
+  # 基本信息
+  description: "设备描述"
+  version: "1.0.0"
+  category:
+    - category_name
+  icon: "icon_device.webp"
+
+  # 类配置
+  class:
+    module: "unilabos.devices.my_module:MyClass"
+    type: python
+
+    # 状态类型（属性 -> ROS消息类型）
+    status_types:
+      status: String
+      temperature: Float64
+      is_running: Bool
+
+    # 动作映射
+    action_value_mappings:
+      action_name:
+        type: UniLabJsonCommand  # 或 UniLabJsonCommandAsync
+        goal: {}
+        feedback: {}
+        result: {}
+        schema: {...}
+        handles: {}
+```
+
+### action_value_mappings 详细格式
+
+```yaml
+action_value_mappings:
+  # 同步动作
+  my_sync_action:
+    type: UniLabJsonCommand
+    goal:
+      param1: param1
+      param2: param2
+    feedback: {}
+    result:
+      success: success
+      message: message
+    goal_default:
+      param1: 0.0
+      param2: ""
+    handles: {}
+    placeholder_keys:
+      device_param: unilabos_devices   # 设备选择器
+      resource_param: unilabos_resources  # 资源选择器
+    schema:
+      title: "动作名称参数"
+      description: "动作描述"
+      type: object
+      properties:
+        goal:
+          type: object
+          properties:
+            param1:
+              type: number
+            param2:
+              type: string
+          required:
+            - param1
+        feedback: {}
+        result:
+          type: object
+          properties:
+            success:
+              type: boolean
+            message:
+              type: string
+      required:
+        - goal
+
+  # 异步动作
+  my_async_action:
+    type: UniLabJsonCommandAsync
+    goal: {}
+    feedback:
+      progress: progress
+      current_status: status
+    result:
+      success: success
+    schema: {...}
+```
+
+### 自动生成的动作
+
+以 `auto-` 开头的动作由系统自动生成：
+
+```yaml
+action_value_mappings:
+  auto-initialize:
+    type: UniLabJsonCommandAsync
+    goal: {}
+    feedback: {}
+    result: {}
+    schema: {...}
+
+  auto-cleanup:
+    type: UniLabJsonCommandAsync
+    goal: {}
+    feedback: {}
+    result: {}
+    schema: {...}
+```
+
+### handles 配置
+
+用于工作流编辑器中的数据流连接：
+
+```yaml
+handles:
+  input:
+    - handler_key: "input_resource"
+      data_type: "resource"
+      label: "输入资源"
+      data_source: "handle"
+      data_key: "resources"
+  output:
+    - handler_key: "output_labware"
+      data_type: "resource"
+      label: "输出器皿"
+      data_source: "executor"
+      data_key: "created_resource.@flatten"
+```
+
+## 资源注册表格式
+
+```yaml
+resource_type_id:
+  description: "资源描述"
+  version: "1.0.0"
+  category:
+    - category_name
+  icon: ""
+  handles: []
+  init_param_schema: {}
+
+  class:
+    module: "unilabos.resources.my_module:MyResource"
+    type: pylabrobot  # 或 python
+```
+
+### PyLabRobot 资源示例
+
+```yaml
+BIOYOND_Electrolyte_6VialCarrier:
+  category:
+    - bottle_carriers
+    - bioyond
+  class:
+    module: "unilabos.resources.bioyond.bottle_carriers:BIOYOND_Electrolyte_6VialCarrier"
+    type: pylabrobot
+  version: "1.0.0"
+```
+
+## 状态类型映射
+
+Python 类型到 ROS 消息类型的映射：
+
+| Python 类型 | ROS 消息类型 |
+|------------|-------------|
+| `str` | `String` |
+| `bool` | `Bool` |
+| `int` | `Int64` |
+| `float` | `Float64` |
+| `list` | `String` (序列化) |
+| `dict` | `String` (序列化) |
+
+## 自动完善注册表
+
+使用 `--complete_registry` 参数自动生成 schema：
+
+```bash
+python -m unilabos.app.main --complete_registry
+```
+
+这会：
+1. 扫描设备类的方法签名
+2. 自动生成 `auto-` 前缀的动作
+3. 生成 JSON Schema
+4. 更新 YAML 文件
+
+## 验证规则
+
+1. **device_type_id** 必须唯一
+2. **module** 路径必须正确可导入
+3. **status_types** 的类型必须是有效的 ROS 消息类型
+4. **schema** 必须是有效的 JSON Schema
+
+## 示例：完整设备配置
+
+```yaml
+virtual_stirrer:
+  category:
+    - virtual_device
+  description: "虚拟搅拌器设备"
+  version: "1.0.0"
+  icon: "icon_stirrer.webp"
+  handles: []
+  init_param_schema: {}
+
+  class:
+    module: "unilabos.devices.virtual.virtual_stirrer:VirtualStirrer"
+    type: python
+
+    status_types:
+      status: String
+      operation_mode: String
+      current_speed: Float64
+      is_stirring: Bool
+      remaining_time: Float64
+
+    action_value_mappings:
+      auto-initialize:
+        type: UniLabJsonCommandAsync
+        goal: {}
+        feedback: {}
+        result: {}
+        schema:
+          title: "initialize参数"
+          type: object
+          properties:
+            goal:
+              type: object
+              properties: {}
+            feedback: {}
+            result: {}
+          required:
+            - goal
+
+      stir:
+        type: UniLabJsonCommandAsync
+        goal:
+          stir_time: stir_time
+          stir_speed: stir_speed
+          settling_time: settling_time
+        feedback:
+          current_speed: current_speed
+          remaining_time: remaining_time
+        result:
+          success: success
+        goal_default:
+          stir_time: 60.0
+          stir_speed: 300.0
+          settling_time: 30.0
+        handles: {}
+        schema:
+          title: "stir参数"
+          description: "搅拌操作"
+          type: object
+          properties:
+            goal:
+              type: object
+              properties:
+                stir_time:
+                  type: number
+                  description: "搅拌时间（秒）"
+                stir_speed:
+                  type: number
+                  description: "搅拌速度（RPM）"
+                settling_time:
+                  type: number
+                  description: "沉降时间（秒）"
+              required:
+                - stir_time
+                - stir_speed
+            feedback:
+              type: object
+              properties:
+                current_speed:
+                  type: number
+                remaining_time:
+                  type: number
+            result:
+              type: object
+              properties:
+                success:
+                  type: boolean
+          required:
+            - goal
+```

.cursor/rules/ros-integration.mdc

@@ -0,0 +1,233 @@
+---
+description: ROS 2 集成开发规范
+globs: ["unilabos/ros/**/*.py", "**/*_node.py"]
+---
+
+# ROS 2 集成开发规范
+
+## 概述
+
+Uni-Lab-OS 使用 ROS 2 作为设备通信中间件，基于 rclpy 实现。
+
+## 核心组件
+
+### BaseROS2DeviceNode
+
+设备节点基类，提供：
+- ROS Topic 自动发布（状态属性）
+- Action Server 自动创建（设备动作）
+- 资源管理服务
+- 异步任务调度
+
+```python
+from unilabos.ros.nodes.base_device_node import BaseROS2DeviceNode
+```
+
+### 消息转换器
+
+```python
+from unilabos.ros.msgs.message_converter import (
+    convert_to_ros_msg,
+    convert_from_ros_msg_with_mapping,
+    msg_converter_manager,
+    ros_action_to_json_schema,
+    ros_message_to_json_schema,
+)
+```
+
+## 设备与 ROS 集成
+
+### post_init 方法
+
+设备类必须实现 `post_init` 方法接收 ROS 节点：
+
+```python
+class MyDevice:
+    _ros_node: BaseROS2DeviceNode
+
+    def post_init(self, ros_node: BaseROS2DeviceNode):
+        """ROS节点注入"""
+        self._ros_node = ros_node
+```
+
+### 状态属性发布
+
+设备的 `@property` 属性会自动发布为 ROS Topic：
+
+```python
+class MyDevice:
+    @property
+    def temperature(self) -> float:
+        return self._temperature
+
+    # 自动发布到 /{namespace}/temperature Topic
+```
+
+### Topic 配置装饰器
+
+```python
+from unilabos.utils.decorator import topic_config
+
+class MyDevice:
+    @property
+    @topic_config(period=1.0, print_publish=False, qos=10)
+    def fast_data(self) -> float:
+        """高频数据 - 每秒发布一次"""
+        return self._fast_data
+
+    @property
+    @topic_config(period=5.0)
+    def slow_data(self) -> str:
+        """低频数据 - 每5秒发布一次"""
+        return self._slow_data
+```
+
+### 订阅装饰器
+
+```python
+from unilabos.utils.decorator import subscribe
+
+class MyDevice:
+    @subscribe(topic="/external/sensor_data", qos=10)
+    def on_sensor_data(self, msg):
+        """订阅外部Topic"""
+        self._sensor_value = msg.data
+```
+
+## 异步操作
+
+### 使用 ROS 节点睡眠
+
+```python
+# 推荐：使用ROS节点的睡眠方法
+await self._ros_node.sleep(1.0)
+
+# 不推荐：直接使用asyncio（可能导致回调阻塞）
+await asyncio.sleep(1.0)
+```
+
+### 获取事件循环
+
+```python
+from unilabos.ros.x.rclpyx import get_event_loop
+
+loop = get_event_loop()
+```
+
+## 消息类型
+
+### unilabos_msgs 包
+
+```python
+from unilabos_msgs.msg import Resource
+from unilabos_msgs.srv import (
+    ResourceAdd,
+    ResourceDelete,
+    ResourceUpdate,
+    ResourceList,
+    SerialCommand,
+)
+from unilabos_msgs.action import SendCmd
+```
+
+### Resource 消息结构
+
+```python
+Resource:
+    id: str
+    name: str
+    category: str
+    type: str
+    parent: str
+    children: List[str]
+    config: str  # JSON字符串
+    data: str    # JSON字符串
+    sample_id: str
+    pose: Pose
+```
+
+## 日志适配器
+
+```python
+from unilabos.utils.log import info, debug, warning, error, trace
+
+class MyDevice:
+    def __init__(self):
+        # 创建设备专属日志器
+        self.logger = logging.getLogger(f"MyDevice.{self.device_id}")
+```
+
+ROSLoggerAdapter 同时向自定义日志和 ROS 日志发送消息。
+
+## Action Server
+
+设备动作自动创建为 ROS Action Server：
+
+```yaml
+# 在注册表中配置
+action_value_mappings:
+  my_action:
+    type: UniLabJsonCommandAsync  # 异步Action
+    goal: {...}
+    feedback: {...}
+    result: {...}
+```
+
+### Action 类型
+
+- **UniLabJsonCommand**: 同步动作
+- **UniLabJsonCommandAsync**: 异步动作（支持feedback）
+
+## 服务客户端
+
+```python
+from rclpy.client import Client
+
+# 调用其他节点的服务
+response = await self._ros_node.call_service(
+    service_name="/other_node/service",
+    request=MyServiceRequest(...)
+)
+```
+
+## 命名空间
+
+设备节点使用命名空间隔离：
+
+```
+/{device_id}/                 # 设备命名空间
+/{device_id}/status          # 状态Topic
+/{device_id}/temperature     # 温度Topic
+/{device_id}/my_action       # 动作Server
+```
+
+## 调试
+
+### 查看 Topic
+
+```bash
+ros2 topic list
+ros2 topic echo /{device_id}/status
+```
+
+### 查看 Action
+
+```bash
+ros2 action list
+ros2 action info /{device_id}/my_action
+```
+
+### 查看 Service
+
+```bash
+ros2 service list
+ros2 service call /{device_id}/resource_list unilabos_msgs/srv/ResourceList
+```
+
+## 最佳实践
+
+1. **状态属性命名**: 使用蛇形命名法（snake_case）
+2. **Topic 频率**: 根据数据变化频率调整，避免过高频率
+3. **Action 反馈**: 长时间操作提供进度反馈
+4. **错误处理**: 使用 try-except 捕获并记录错误
+5. **资源清理**: 在 cleanup 方法中正确清理资源

.cursor/rules/testing-patterns.mdc

@@ -0,0 +1,357 @@
+---
+description: 测试开发规范
+globs: ["tests/**/*.py", "**/test_*.py"]
+---
+
+# 测试开发规范
+
+## 目录结构
+
+```
+tests/
+├── __init__.py
+├── devices/              # 设备测试
+│   └── liquid_handling/
+│       └── test_transfer_liquid.py
+├── resources/            # 资源测试
+│   ├── test_bottle_carrier.py
+│   └── test_resourcetreeset.py
+├── ros/                  # ROS消息测试
+│   └── msgs/
+│       ├── test_basic.py
+│       ├── test_conversion.py
+│       └── test_mapping.py
+└── workflow/             # 工作流测试
+    └── merge_workflow.py
+```
+
+## 测试框架
+
+使用 pytest 作为测试框架：
+
+```bash
+# 运行所有测试
+pytest tests/
+
+# 运行特定测试文件
+pytest tests/resources/test_bottle_carrier.py
+
+# 运行特定测试函数
+pytest tests/resources/test_bottle_carrier.py::test_bottle_carrier
+
+# 显示详细输出
+pytest -v tests/
+
+# 显示打印输出
+pytest -s tests/
+```
+
+## 测试文件模板
+
+```python
+import pytest
+from typing import List, Dict, Any
+
+# 导入被测试的模块
+from unilabos.resources.bioyond.bottle_carriers import (
+    BIOYOND_Electrolyte_6VialCarrier,
+)
+from unilabos.resources.bioyond.bottles import (
+    BIOYOND_PolymerStation_Solid_Vial,
+)
+
+
+class TestBottleCarrier:
+    """BottleCarrier 测试类"""
+
+    def setup_method(self):
+        """每个测试方法前执行"""
+        self.carrier = BIOYOND_Electrolyte_6VialCarrier("test_carrier")
+
+    def teardown_method(self):
+        """每个测试方法后执行"""
+        pass
+
+    def test_carrier_creation(self):
+        """测试载架创建"""
+        assert self.carrier.name == "test_carrier"
+        assert len(self.carrier.sites) == 6
+
+    def test_bottle_placement(self):
+        """测试瓶子放置"""
+        bottle = BIOYOND_PolymerStation_Solid_Vial("test_bottle")
+        # 测试逻辑...
+        assert bottle.name == "test_bottle"
+
+
+def test_standalone_function():
+    """独立测试函数"""
+    result = some_function()
+    assert result is True
+
+
+# 参数化测试
+@pytest.mark.parametrize("input,expected", [
+    ("5 min", 300.0),
+    ("1 h", 3600.0),
+    ("120", 120.0),
+    (60, 60.0),
+])
+def test_time_parsing(input, expected):
+    """测试时间解析"""
+    from unilabos.compile.utils.unit_parser import parse_time_input
+    assert parse_time_input(input) == expected
+
+
+# 异常测试
+def test_invalid_input_raises_error():
+    """测试无效输入抛出异常"""
+    with pytest.raises(ValueError) as exc_info:
+        invalid_function("bad_input")
+    assert "invalid" in str(exc_info.value).lower()
+
+
+# 跳过条件测试
+@pytest.mark.skipif(
+    not os.environ.get("ROS_DISTRO"),
+    reason="需要ROS环境"
+)
+def test_ros_feature():
+    """需要ROS环境的测试"""
+    pass
+```
+
+## 设备测试
+
+### 虚拟设备测试
+
+```python
+import pytest
+import asyncio
+from unittest.mock import MagicMock, AsyncMock
+
+from unilabos.devices.virtual.virtual_stirrer import VirtualStirrer
+
+
+class TestVirtualStirrer:
+    """VirtualStirrer 测试"""
+
+    @pytest.fixture
+    def stirrer(self):
+        """创建测试用搅拌器"""
+        device = VirtualStirrer(
+            device_id="test_stirrer",
+            config={"max_speed": 1500.0, "min_speed": 50.0}
+        )
+
+        # Mock ROS节点
+        mock_node = MagicMock()
+        mock_node.sleep = AsyncMock(return_value=None)
+        device.post_init(mock_node)
+
+        return device
+
+    @pytest.mark.asyncio
+    async def test_initialize(self, stirrer):
+        """测试初始化"""
+        result = await stirrer.initialize()
+        assert result is True
+        assert stirrer.status == "待机中"
+
+    @pytest.mark.asyncio
+    async def test_stir_action(self, stirrer):
+        """测试搅拌动作"""
+        await stirrer.initialize()
+
+        result = await stirrer.stir(
+            stir_time=5.0,
+            stir_speed=300.0,
+            settling_time=2.0
+        )
+
+        assert result is True
+        assert stirrer.operation_mode == "Completed"
+
+    @pytest.mark.asyncio
+    async def test_stir_invalid_speed(self, stirrer):
+        """测试无效速度"""
+        await stirrer.initialize()
+
+        # 速度超出范围
+        result = await stirrer.stir(
+            stir_time=5.0,
+            stir_speed=2000.0,  # 超过max_speed
+            settling_time=0.0
+        )
+
+        assert result is False
+        assert "错误" in stirrer.status
+```
+
+### 异步测试配置
+
+```python
+# conftest.py
+import pytest
+import asyncio
+
+
+@pytest.fixture(scope="session")
+def event_loop():
+    """创建事件循环"""
+    loop = asyncio.get_event_loop_policy().new_event_loop()
+    yield loop
+    loop.close()
+```
+
+## 资源测试
+
+```python
+import pytest
+from unilabos.resources.resource_tracker import (
+    ResourceTreeSet,
+    ResourceTreeInstance,
+)
+
+
+def test_resource_tree_creation():
+    """测试资源树创建"""
+    tree_set = ResourceTreeSet()
+
+    # 添加资源
+    resource = {"id": "res_1", "name": "Resource 1"}
+    tree_set.add_resource(resource)
+
+    # 验证
+    assert len(tree_set.all_nodes) == 1
+    assert tree_set.get_resource("res_1") is not None
+
+
+def test_resource_tree_merge():
+    """测试资源树合并"""
+    local_set = ResourceTreeSet()
+    remote_set = ResourceTreeSet()
+
+    # 设置数据...
+
+    local_set.merge_remote_resources(remote_set)
+
+    # 验证合并结果...
+```
+
+## ROS 消息测试
+
+```python
+import pytest
+from unilabos.ros.msgs.message_converter import (
+    convert_to_ros_msg,
+    convert_from_ros_msg_with_mapping,
+    msg_converter_manager,
+)
+
+
+def test_message_conversion():
+    """测试消息转换"""
+    # Python -> ROS
+    python_data = {"id": "test", "value": 42}
+    ros_msg = convert_to_ros_msg(python_data, MyMsgType)
+
+    assert ros_msg.id == "test"
+    assert ros_msg.value == 42
+
+    # ROS -> Python
+    result = convert_from_ros_msg_with_mapping(ros_msg, mapping)
+    assert result["id"] == "test"
+```
+
+## 协议测试
+
+```python
+import pytest
+import networkx as nx
+from unilabos.compile.stir_protocol import (
+    generate_stir_protocol,
+    extract_vessel_id,
+)
+
+
+@pytest.fixture
+def topology_graph():
+    """创建测试拓扑图"""
+    G = nx.DiGraph()
+    G.add_node("flask_1", **{"class": "flask"})
+    G.add_node("stirrer_1", **{"class": "virtual_stirrer"})
+    G.add_edge("stirrer_1", "flask_1")
+    return G
+
+
+def test_generate_stir_protocol(topology_graph):
+    """测试搅拌协议生成"""
+    actions = generate_stir_protocol(
+        G=topology_graph,
+        vessel="flask_1",
+        time="5 min",
+        stir_speed=300.0
+    )
+
+    assert len(actions) == 1
+    assert actions[0]["device_id"] == "stirrer_1"
+    assert actions[0]["action_name"] == "stir"
+
+
+def test_extract_vessel_id():
+    """测试vessel_id提取"""
+    # 字典格式
+    assert extract_vessel_id({"id": "flask_1"}) == "flask_1"
+
+    # 字符串格式
+    assert extract_vessel_id("flask_2") == "flask_2"
+
+    # 空值
+    assert extract_vessel_id("") == ""
+```
+
+## 测试标记
+
+```python
+# 慢速测试
+@pytest.mark.slow
+def test_long_running():
+    pass
+
+# 需要网络
+@pytest.mark.network
+def test_network_call():
+    pass
+
+# 需要ROS
+@pytest.mark.ros
+def test_ros_feature():
+    pass
+```
+
+运行特定标记的测试：
+
+```bash
+pytest -m "not slow"  # 排除慢速测试
+pytest -m ros         # 仅ROS测试
+```
+
+## 覆盖率
+
+```bash
+# 生成覆盖率报告
+pytest --cov=unilabos tests/
+
+# HTML报告
+pytest --cov=unilabos --cov-report=html tests/
+```
+
+## 最佳实践
+
+1. **测试命名**: `test_{功能}_{场景}_{预期结果}`
+2. **独立性**: 每个测试独立运行，不依赖其他测试
+3. **Mock外部依赖**: 使用 unittest.mock 模拟外部服务
+4. **参数化**: 使用 `@pytest.mark.parametrize` 减少重复代码
+5. **fixtures**: 使用 fixtures 共享测试设置
+6. **断言清晰**: 每个断言只验证一件事

.cursor/rules/unilabos-project.mdc

@@ -0,0 +1,353 @@
+---
+description: Uni-Lab-OS 实验室自动化平台开发规范 - 核心规则
+globs: ["**/*.py", "**/*.yaml", "**/*.json"]
+---
+
+# Uni-Lab-OS 项目开发规范
+
+## 项目概述
+
+Uni-Lab-OS 是一个实验室自动化操作系统，用于连接和控制各种实验设备，实现实验工作流的自动化和标准化。
+
+## 技术栈
+
+- **Python 3.11** - 核心开发语言
+- **ROS 2** - 设备通信中间件 (rclpy)
+- **Conda/Mamba** - 包管理 (robostack-staging, conda-forge)
+- **FastAPI** - Web API 服务
+- **WebSocket** - 实时通信
+- **NetworkX** - 拓扑图管理
+- **YAML** - 配置和注册表定义
+- **PyLabRobot** - 实验室自动化库集成
+- **pytest** - 测试框架
+- **asyncio** - 异步编程
+
+## 项目结构
+
+```
+unilabos/
+├── app/           # 应用入口、Web服务、后端
+├── compile/       # 协议编译器 (stir, add, filter 等)
+├── config/        # 配置管理
+├── devices/       # 设备驱动 (真实/虚拟)
+├── device_comms/  # 设备通信协议
+├── device_mesh/   # 3D网格和可视化
+├── registry/      # 设备和资源类型注册表 (YAML)
+├── resources/     # 资源定义
+├── ros/           # ROS 2 集成
+├── utils/         # 工具函数
+└── workflow/      # 工作流管理
+```
+
+## 代码规范
+
+### Python 风格
+
+1. **类型注解**：所有函数必须使用类型注解
+   ```python
+   def transfer_liquid(
+       source: str,
+       destination: str,
+       volume: float,
+       **kwargs
+   ) -> List[Dict[str, Any]]:
+   ```
+
+2. **Docstring**：使用 Google 风格的文档字符串
+   ```python
+   def initialize(self) -> bool:
+       """
+       初始化设备
+
+       Returns:
+           bool: 初始化是否成功
+       """
+   ```
+
+3. **导入顺序**：
+   - 标准库
+   - 第三方库
+   - ROS 相关 (rclpy, unilabos_msgs)
+   - 项目内部模块
+
+### 异步编程
+
+1. 设备操作方法使用 `async def`
+2. 使用 `await self._ros_node.sleep()` 而非 `asyncio.sleep()`
+3. 长时间运行操作需提供进度反馈
+
+```python
+async def stir(self, stir_time: float, stir_speed: float, **kwargs) -> bool:
+    """执行搅拌操作"""
+    start_time = time_module.time()
+    while True:
+        elapsed = time_module.time() - start_time
+        remaining = max(0, stir_time - elapsed)
+
+        self.data.update({
+            "remaining_time": remaining,
+            "status": f"搅拌中: {stir_speed} RPM"
+        })
+
+        if remaining <= 0:
+            break
+        await self._ros_node.sleep(1.0)
+    return True
+```
+
+### 日志规范
+
+使用项目自定义日志系统：
+
+```python
+from unilabos.utils.log import logger, info, debug, warning, error, trace
+
+# 在设备类中使用
+self.logger = logging.getLogger(f"DeviceName.{self.device_id}")
+self.logger.info("设备初始化完成")
+```
+
+## 设备驱动开发
+
+### 设备类结构
+
+```python
+from unilabos.ros.nodes.base_device_node import BaseROS2DeviceNode
+
+class MyDevice:
+    """设备驱动类"""
+
+    _ros_node: BaseROS2DeviceNode
+
+    def __init__(self, device_id: str = None, config: Dict[str, Any] = None, **kwargs):
+        self.device_id = device_id or "unknown_device"
+        self.config = config or {}
+        self.data = {}  # 设备状态数据
+
+    def post_init(self, ros_node: BaseROS2DeviceNode):
+        """ROS节点注入"""
+        self._ros_node = ros_node
+
+    async def initialize(self) -> bool:
+        """初始化设备"""
+        pass
+
+    async def cleanup(self) -> bool:
+        """清理设备"""
+        pass
+
+    # 状态属性 - 自动发布为 ROS Topic
+    @property
+    def status(self) -> str:
+        return self.data.get("status", "待机")
+```
+
+### 状态属性装饰器
+
+```python
+from unilabos.utils.decorator import topic_config
+
+class MyDevice:
+    @property
+    @topic_config(period=1.0, qos=10)  # 每秒发布一次
+    def temperature(self) -> float:
+        return self._temperature
+```
+
+### 虚拟设备
+
+虚拟设备放置在 `unilabos/devices/virtual/` 目录下，命名为 `virtual_*.py`
+
+## 注册表配置
+
+### 设备注册表 (YAML)
+
+位置: `unilabos/registry/devices/*.yaml`
+
+```yaml
+my_device_type:
+  category:
+    - my_category
+  description: "设备描述"
+  version: "1.0.0"
+  class:
+    module: "unilabos.devices.my_device:MyDevice"
+    type: python
+    status_types:
+      status: String
+      temperature: Float64
+    action_value_mappings:
+      auto-initialize:
+        type: UniLabJsonCommandAsync
+        goal: {}
+        feedback: {}
+        result: {}
+        schema: {...}
+```
+
+### 资源注册表 (YAML)
+
+位置: `unilabos/registry/resources/**/*.yaml`
+
+```yaml
+my_container:
+  category:
+    - container
+  class:
+    module: "unilabos.resources.my_resource:MyContainer"
+    type: pylabrobot
+  version: "1.0.0"
+```
+
+## 协议编译器
+
+位置: `unilabos/compile/*_protocol.py`
+
+### 协议生成函数模板
+
+```python
+from typing import List, Dict, Any, Union
+import networkx as nx
+
+def generate_my_protocol(
+    G: nx.DiGraph,
+    vessel: Union[str, dict],
+    param1: float = 0.0,
+    **kwargs
+) -> List[Dict[str, Any]]:
+    """
+    生成操作协议序列
+
+    Args:
+        G: 物理拓扑图
+        vessel: 容器ID或字典
+        param1: 参数1
+
+    Returns:
+        List[Dict]: 动作序列
+    """
+    # 提取vessel_id
+    vessel_id = vessel if isinstance(vessel, str) else vessel.get("id", "")
+
+    # 查找设备
+    device_id = find_connected_device(G, vessel_id)
+
+    # 生成动作
+    action_sequence = [{
+        "device_id": device_id,
+        "action_name": "my_action",
+        "action_kwargs": {
+            "vessel": {"id": vessel_id},
+            "param1": float(param1)
+        }
+    }]
+
+    return action_sequence
+```
+
+## 测试规范
+
+### 测试文件位置
+
+- 单元测试: `tests/` 目录
+- 设备测试: `tests/devices/`
+- 资源测试: `tests/resources/`
+- ROS消息测试: `tests/ros/msgs/`
+
+### 测试命名
+
+```python
+# tests/devices/my_device/test_my_device.py
+
+import pytest
+
+def test_device_initialization():
+    """测试设备初始化"""
+    pass
+
+def test_device_action():
+    """测试设备动作"""
+    pass
+```
+
+## 错误处理
+
+```python
+from unilabos.utils.exception import UniLabException
+
+try:
+    result = await device.execute_action()
+except ValueError as e:
+    self.logger.error(f"参数错误: {e}")
+    self.data["status"] = "错误: 参数无效"
+    return False
+except Exception as e:
+    self.logger.error(f"执行失败: {e}")
+    raise
+```
+
+## 配置管理
+
+```python
+from unilabos.config.config import BasicConfig, HTTPConfig
+
+# 读取配置
+port = BasicConfig.port
+is_host = BasicConfig.is_host_mode
+
+# 配置文件: local_config.py
+```
+
+## 常用工具
+
+### 单例模式
+
+```python
+from unilabos.utils.decorator import singleton
+
+@singleton
+class MyManager:
+    pass
+```
+
+### 类型检查
+
+```python
+from unilabos.utils.type_check import NoAliasDumper
+
+yaml.dump(data, f, Dumper=NoAliasDumper)
+```
+
+### 导入管理
+
+```python
+from unilabos.utils.import_manager import get_class
+
+device_class = get_class("unilabos.devices.my_device:MyDevice")
+```
+
+## Git 提交规范
+
+提交信息格式:
+```
+<type>(<scope>): <subject>
+
+<body>
+```
+
+类型:
+- `feat`: 新功能
+- `fix`: 修复bug
+- `docs`: 文档更新
+- `refactor`: 重构
+- `test`: 测试相关
+- `chore`: 构建/工具相关
+
+示例:
+```
+feat(devices): 添加虚拟搅拌器设备
+
+- 实现VirtualStirrer类
+- 支持定时搅拌和持续搅拌模式
+- 添加速度验证逻辑
+```

.cursor/skills/add-device/SKILL.md

@@ -0,0 +1,160 @@
+---
+name: add-device
+description: Guide for adding new devices to Uni-Lab-OS (接入新设备). Uses @device decorator + AST auto-scanning instead of manual YAML. Walks through device category, communication protocol, driver creation with decorators, and graph file setup. Use when the user wants to add/integrate a new device, create a device driver, write a device class, or mentions 接入设备/添加设备/设备驱动/物模型.
+---
+
+# 添加新设备到 Uni-Lab-OS
+
+**第一步：** 使用 Read 工具读取 `docs/ai_guides/add_device.md`，获取完整的设备接入指南。
+
+该指南包含设备类别（物模型）列表、通信协议模板、常见错误检查清单等。搜索 `unilabos/devices/` 获取已有设备的实现参考。
+
+---
+
+## 装饰器参考
+
+### @device — 设备类装饰器
+
+```python
+from unilabos.registry.decorators import device
+
+# 单设备
+@device(
+    id="my_device.vendor",           # 注册表唯一标识（必填）
+    category=["temperature"],         # 分类标签列表（必填）
+    description="设备描述",            # 设备描述
+    display_name="显示名称",           # UI 显示名称（默认用 id）
+    icon="DeviceIcon.webp",           # 图标文件名
+    version="1.0.0",                  # 版本号
+    device_type="python",             # "python" 或 "ros2"
+    handles=[...],                    # 端口列表（InputHandle / OutputHandle）
+    model={...},                      # 3D 模型配置
+    hardware_interface=HardwareInterface(...),  # 硬件通信接口
+)
+
+# 多设备（同一个类注册多个设备 ID，各自有不同的 handles 等配置）
+@device(
+    ids=["pump.vendor.model_A", "pump.vendor.model_B"],
+    id_meta={
+        "pump.vendor.model_A": {"handles": [...], "description": "型号 A"},
+        "pump.vendor.model_B": {"handles": [...], "description": "型号 B"},
+    },
+    category=["pump_and_valve"],
+)
+```
+
+### @action — 动作方法装饰器
+
+```python
+from unilabos.registry.decorators import action
+
+@action                              # 无参：注册为 UniLabJsonCommand 动作
+@action()                            # 同上
+@action(description="执行操作")       # 带描述
+@action(
+    action_type=HeatChill,           # 指定 ROS Action 消息类型
+    goal={"temperature": "temp"},    # Goal 字段映射
+    feedback={},                     # Feedback 字段映射
+    result={},                       # Result 字段映射
+    handles=[...],                   # 动作级别端口
+    goal_default={"temp": 25.0},     # Goal 默认值
+    placeholder_keys={...},          # 参数占位符
+    always_free=True,                # 不受排队限制
+    auto_prefix=True,                # 强制使用 auto- 前缀
+    parent=True,                     # 从父类 MRO 获取参数签名
+)
+```
+
+**自动识别规则：**
+- 带 `@action` 的公开方法 → 注册为动作（方法名即动作名）
+- **不带 `@action` 的公开方法** → 自动注册为 `auto-{方法名}` 动作
+- `_` 开头的方法 → 不扫描
+- `@not_action` 标记的方法 → 排除
+
+### @topic_config — 状态属性配置
+
+```python
+from unilabos.registry.decorators import topic_config
+
+@property
+@topic_config(
+    period=5.0,            # 发布周期（秒），默认 5.0
+    print_publish=False,   # 是否打印发布日志
+    qos=10,                # QoS 深度，默认 10
+    name="custom_name",    # 自定义发布名称（默认用属性名）
+)
+def temperature(self) -> float:
+    return self.data.get("temperature", 0.0)
+```
+
+### 辅助装饰器
+
+```python
+from unilabos.registry.decorators import not_action, always_free
+
+@not_action          # 标记为非动作（post_init、辅助方法等）
+@always_free         # 标记为不受排队限制（查询类操作）
+```
+
+---
+
+## 设备模板
+
+```python
+import logging
+from typing import Any, Dict, Optional
+
+from unilabos.ros.nodes.base_device_node import BaseROS2DeviceNode
+from unilabos.registry.decorators import device, action, topic_config, not_action
+
+@device(id="my_device", category=["my_category"], description="设备描述")
+class MyDevice:
+    _ros_node: BaseROS2DeviceNode
+
+    def __init__(self, device_id: Optional[str] = None, config: Optional[Dict[str, Any]] = None, **kwargs):
+        self.device_id = device_id or "my_device"
+        self.config = config or {}
+        self.logger = logging.getLogger(f"MyDevice.{self.device_id}")
+        self.data: Dict[str, Any] = {"status": "Idle"}
+
+    @not_action
+    def post_init(self, ros_node: BaseROS2DeviceNode) -> None:
+        self._ros_node = ros_node
+
+    @action
+    async def initialize(self) -> bool:
+        self.data["status"] = "Ready"
+        return True
+
+    @action
+    async def cleanup(self) -> bool:
+        self.data["status"] = "Offline"
+        return True
+
+    @action(description="执行操作")
+    def my_action(self, param: float = 0.0, name: str = "") -> Dict[str, Any]:
+        """带 @action 装饰器 → 注册为 'my_action' 动作"""
+        return {"success": True}
+
+    def get_info(self) -> Dict[str, Any]:
+        """无 @action → 自动注册为 'auto-get_info' 动作"""
+        return {"device_id": self.device_id}
+
+    @property
+    @topic_config()
+    def status(self) -> str:
+        return self.data.get("status", "Idle")
+
+    @property
+    @topic_config(period=2.0)
+    def temperature(self) -> float:
+        return self.data.get("temperature", 0.0)
+```
+
+### 要点
+
+- `_ros_node: BaseROS2DeviceNode` 类型标注放在类体顶部
+- `__init__` 签名固定为 `(self, device_id=None, config=None, **kwargs)`
+- `post_init` 用 `@not_action` 标记，参数类型标注为 `BaseROS2DeviceNode`
+- 运行时状态存储在 `self.data` 字典中
+- 设备文件放在 `unilabos/devices/<category>/` 目录下

.cursor/skills/add-resource/SKILL.md

@@ -0,0 +1,351 @@
+---
+name: add-resource
+description: Guide for adding new resources (materials, bottles, carriers, decks, warehouses) to Uni-Lab-OS (添加新物料/资源). Uses @resource decorator for AST auto-scanning. Covers Bottle, Carrier, Deck, WareHouse definitions. Use when the user wants to add resources, define materials, create a deck layout, add bottles/carriers/plates, or mentions 物料/资源/resource/bottle/carrier/deck/plate/warehouse.
+---
+
+# 添加新物料资源
+
+Uni-Lab-OS 的资源体系基于 PyLabRobot，通过扩展实现 Bottle、Carrier、WareHouse、Deck 等实验室物料管理。使用 `@resource` 装饰器注册，AST 自动扫描生成注册表条目。
+
+---
+
+## 资源类型
+
+| 类型 | 基类 | 用途 | 示例 |
+|------|------|------|------|
+| **Bottle** | `Well` (PyLabRobot) | 单个容器（瓶、小瓶、烧杯、反应器） | 试剂瓶、粉末瓶 |
+| **BottleCarrier** | `ItemizedCarrier` | 多槽位载架（放多个 Bottle） | 6 位试剂架、枪头盒 |
+| **WareHouse** | `ItemizedCarrier` | 堆栈/仓库（放多个 Carrier） | 4x4 堆栈 |
+| **Deck** | `Deck` (PyLabRobot) | 工作站台面（放多个 WareHouse） | 反应站 Deck |
+
+**层级关系：** `Deck` → `WareHouse` → `BottleCarrier` → `Bottle`
+
+WareHouse 本质上和 Site 是同一概念 — 都是定义一组固定的放置位（slot），只不过 WareHouse 多嵌套了一层 Deck。两者都需要开发者根据实际物理尺寸自行计算各 slot 的偏移坐标。
+
+---
+
+## @resource 装饰器
+
+```python
+from unilabos.registry.decorators import resource
+
+@resource(
+    id="my_resource_id",        # 注册表唯一标识（必填）
+    category=["bottles"],       # 分类标签列表（必填）
+    description="资源描述",
+    icon="",                    # 图标
+    version="1.0.0",
+    handles=[...],              # 端口列表（InputHandle / OutputHandle）
+    model={...},                # 3D 模型配置
+    class_type="pylabrobot",    # "python" / "pylabrobot" / "unilabos"
+)
+```
+
+---
+
+## 创建规范
+
+### 命名规则
+
+1. **`name` 参数作为前缀**：所有工厂函数必须接受 `name: str` 参数，创建子物料时以 `name` 作为前缀，确保实例名在运行时全局唯一
+2. **Bottle 命名约定**：试剂瓶-Bottle，烧杯-Beaker，烧瓶-Flask，小瓶-Vial
+3. **函数名 = `@resource(id=...)`**：工厂函数名与注册表 id 保持一致
+
+### 子物料命名示例
+
+```python
+# Carrier 内部的 sites 用 name 前缀
+for k, v in sites.items():
+    v.name = f"{name}_{v.name}"     # "堆栈1左_A01", "堆栈1左_B02" ...
+
+# Carrier 中放置 Bottle 时用 name 前缀
+carrier[0] = My_Reagent_Bottle(f"{name}_flask_1")    # "堆栈1左_flask_1"
+carrier[i] = My_Solid_Vial(f"{name}_vial_{ordering[i]}")  # "堆栈1左_vial_A1"
+
+# create_homogeneous_resources 使用 name_prefix
+sites=create_homogeneous_resources(
+    klass=ResourceHolder,
+    locations=[...],
+    name_prefix=name,  # 自动生成 "{name}_0", "{name}_1" ...
+)
+
+# Deck setup 中用仓库名称作为 name 传入
+self.warehouses = {
+    "堆栈1左": my_warehouse_4x4("堆栈1左"),   # WareHouse.name = "堆栈1左"
+    "试剂堆栈": my_reagent_stack("试剂堆栈"),  # WareHouse.name = "试剂堆栈"
+}
+```
+
+### 其他规范
+
+- **max_volume 单位为 μL**：500mL = 500000
+- **尺寸单位为 mm**：`diameter`, `height`, `size_x/y/z`, `dx/dy/dz`
+- **BottleCarrier 必须设置 `num_items_x/y/z`**：用于前端渲染布局
+- **Deck 的 `__init__` 必须接受 `setup=False`**：图文件中 `config.setup=true` 触发 `setup()`
+- **按项目分组文件**：同一工作站的资源放在 `unilabos/resources/<project>/` 下
+- **`__init__` 必须接受 `serialize()` 输出的所有字段**：`serialize()` 输出会作为 `config` 回传到 `__init__`，因此必须通过显式参数或 `**kwargs` 接受，否则反序列化会报错
+- **持久化运行时状态用 `serialize_state()`**：通过 `_unilabos_state` 字典存储可变信息（如物料内容、液体量），只存 JSON 可序列化的基本类型
+
+---
+
+## 资源模板
+
+### Bottle
+
+```python
+from unilabos.registry.decorators import resource
+from unilabos.resources.itemized_carrier import Bottle
+
+
+@resource(id="My_Reagent_Bottle", category=["bottles"], description="我的试剂瓶")
+def My_Reagent_Bottle(
+    name: str,
+    diameter: float = 70.0,
+    height: float = 120.0,
+    max_volume: float = 500000.0,
+    barcode: str = None,
+) -> Bottle:
+    return Bottle(
+        name=name,
+        diameter=diameter,
+        height=height,
+        max_volume=max_volume,
+        barcode=barcode,
+        model="My_Reagent_Bottle",
+    )
+```
+
+**Bottle 参数：**
+- `name`: 实例名称（运行时唯一，由上层 Carrier 以前缀方式传入）
+- `diameter`: 瓶体直径 (mm)
+- `height`: 瓶体高度 (mm)
+- `max_volume`: 最大容积（**μL**，500mL = 500000）
+- `barcode`: 条形码（可选）
+
+### BottleCarrier
+
+```python
+from pylabrobot.resources import ResourceHolder
+from pylabrobot.resources.carrier import create_ordered_items_2d
+from unilabos.resources.itemized_carrier import BottleCarrier
+from unilabos.registry.decorators import resource
+
+
+@resource(id="My_6SlotCarrier", category=["bottle_carriers"], description="六槽位载架")
+def My_6SlotCarrier(name: str) -> BottleCarrier:
+    sites = create_ordered_items_2d(
+        klass=ResourceHolder,
+        num_items_x=3, num_items_y=2,
+        dx=10.0, dy=10.0, dz=5.0,
+        item_dx=42.0, item_dy=35.0,
+        size_x=20.0, size_y=20.0, size_z=50.0,
+    )
+    # 子 site 用 name 作为前缀
+    for k, v in sites.items():
+        v.name = f"{name}_{v.name}"
+
+    carrier = BottleCarrier(
+        name=name, size_x=146.0, size_y=80.0, size_z=55.0,
+        sites=sites, model="My_6SlotCarrier",
+    )
+    carrier.num_items_x = 3
+    carrier.num_items_y = 2
+    carrier.num_items_z = 1
+
+    # 放置 Bottle 时用 name 作为前缀
+    ordering = ["A1", "B1", "A2", "B2", "A3", "B3"]
+    for i in range(6):
+        carrier[i] = My_Reagent_Bottle(f"{name}_vial_{ordering[i]}")
+    return carrier
+```
+
+### WareHouse / Deck 放置位
+
+WareHouse 和 Site 本质上是同一概念：都是定义一组固定放置位（slot），根据物理尺寸自行批量计算偏移坐标。WareHouse 只是多嵌套了一层 Deck 而已。推荐开发者直接根据实物测量数据计算各 slot 偏移量。
+
+#### WareHouse（使用 warehouse_factory）
+
+```python
+from unilabos.resources.warehouse import warehouse_factory
+from unilabos.registry.decorators import resource
+
+
+@resource(id="my_warehouse_4x4", category=["warehouse"], description="4x4 堆栈仓库")
+def my_warehouse_4x4(name: str) -> "WareHouse":
+    return warehouse_factory(
+        name=name,
+        num_items_x=4, num_items_y=4, num_items_z=1,
+        dx=10.0, dy=10.0, dz=10.0,             # 第一个 slot 的起始偏移
+        item_dx=147.0, item_dy=106.0, item_dz=130.0,  # slot 间距
+        resource_size_x=127.0, resource_size_y=85.0, resource_size_z=100.0,  # slot 尺寸
+        model="my_warehouse_4x4",
+        col_offset=0,       # 列标签起始偏移（0 → A01, 4 → A05）
+        layout="row-major",  # "row-major" 行优先 / "col-major" 列优先 / "vertical-col-major" 竖向
+    )
+```
+
+`warehouse_factory` 参数说明：
+- `dx/dy/dz`：第一个 slot 相对 WareHouse 原点的偏移（mm）
+- `item_dx/item_dy/item_dz`：相邻 slot 间距（mm），需根据实际物理间距测量
+- `resource_size_x/y/z`：每个 slot 的可放置区域尺寸
+- `layout`：影响 slot 标签和坐标映射
+  - `"row-major"`：A01,A02,...,B01,B02,...（行优先，适合横向排列）
+  - `"col-major"`：A01,B01,...,A02,B02,...（列优先）
+  - `"vertical-col-major"`：竖向排列，y 坐标反向
+
+#### Deck 组装 WareHouse
+
+Deck 通过 `setup()` 将多个 WareHouse 放置到指定坐标：
+
+```python
+from pylabrobot.resources import Deck, Coordinate
+from unilabos.registry.decorators import resource
+
+
+@resource(id="MyStation_Deck", category=["deck"], description="我的工作站 Deck")
+class MyStation_Deck(Deck):
+    def __init__(self, name="MyStation_Deck", size_x=2700.0, size_y=1080.0, size_z=1500.0,
+                 category="deck", setup=False, **kwargs) -> None:
+        super().__init__(name=name, size_x=size_x, size_y=size_y, size_z=size_z)
+        if setup:
+            self.setup()
+
+    def setup(self) -> None:
+        self.warehouses = {
+            "堆栈1左": my_warehouse_4x4("堆栈1左"),
+            "堆栈1右": my_warehouse_4x4("堆栈1右"),
+        }
+        self.warehouse_locations = {
+            "堆栈1左": Coordinate(-200.0, 400.0, 0.0),  # 自行测量计算
+            "堆栈1右": Coordinate(2350.0, 400.0, 0.0),
+        }
+        for wh_name, wh in self.warehouses.items():
+            self.assign_child_resource(wh, location=self.warehouse_locations[wh_name])
+```
+
+#### Site 模式（前端定向放置）
+
+适用于有固定孔位/槽位的设备（如移液站 PRCXI 9300），Deck 通过 `sites` 列表定义前端展示的放置位，前端据此渲染可拖拽的孔位布局：
+
+```python
+import collections
+from typing import Any, Dict, List, Optional
+from pylabrobot.resources import Deck, Resource, Coordinate
+from unilabos.registry.decorators import resource
+
+
+@resource(id="MyLabDeck", category=["deck"], description="带 Site 定向放置的 Deck")
+class MyLabDeck(Deck):
+    # 根据设备台面实测批量计算各 slot 坐标偏移
+    _DEFAULT_SITE_POSITIONS = [
+        (0, 0, 0), (138, 0, 0), (276, 0, 0), (414, 0, 0),       # T1-T4
+        (0, 96, 0), (138, 96, 0), (276, 96, 0), (414, 96, 0),   # T5-T8
+    ]
+    _DEFAULT_SITE_SIZE = {"width": 128.0, "height": 86.0, "depth": 0}
+    _DEFAULT_CONTENT_TYPE = ["plate", "tip_rack", "tube_rack", "adaptor"]
+
+    def __init__(self, name: str, size_x: float, size_y: float, size_z: float,
+                 sites: Optional[List[Dict[str, Any]]] = None, **kwargs):
+        super().__init__(size_x, size_y, size_z, name)
+        if sites is not None:
+            self.sites = [dict(s) for s in sites]
+        else:
+            self.sites = []
+            for i, (x, y, z) in enumerate(self._DEFAULT_SITE_POSITIONS):
+                self.sites.append({
+                    "label": f"T{i + 1}",          # 前端显示的槽位标签
+                    "visible": True,                # 是否在前端可见
+                    "position": {"x": x, "y": y, "z": z},  # 槽位物理坐标
+                    "size": dict(self._DEFAULT_SITE_SIZE),  # 槽位尺寸
+                    "content_type": list(self._DEFAULT_CONTENT_TYPE),  # 允许放入的物料类型
+                })
+        self._ordering = collections.OrderedDict(
+            (site["label"], None) for site in self.sites
+        )
+
+    def assign_child_resource(self, resource: Resource,
+                              location: Optional[Coordinate] = None,
+                              reassign: bool = True,
+                              spot: Optional[int] = None):
+        idx = spot
+        if spot is None:
+            for i, site in enumerate(self.sites):
+                if site.get("label") == resource.name:
+                    idx = i
+                    break
+        if idx is None:
+            for i in range(len(self.sites)):
+                if self._get_site_resource(i) is None:
+                    idx = i
+                    break
+        if idx is None:
+            raise ValueError(f"No available site for '{resource.name}'")
+        loc = Coordinate(**self.sites[idx]["position"])
+        super().assign_child_resource(resource, location=loc, reassign=reassign)
+
+    def serialize(self) -> dict:
+        data = super().serialize()
+        sites_out = []
+        for i, site in enumerate(self.sites):
+            occupied = self._get_site_resource(i)
+            sites_out.append({
+                "label": site["label"],
+                "visible": site.get("visible", True),
+                "occupied_by": occupied.name if occupied else None,
+                "position": site["position"],
+                "size": site["size"],
+                "content_type": site["content_type"],
+            })
+        data["sites"] = sites_out
+        return data
+```
+
+**Site 字段说明：**
+
+| 字段 | 类型 | 说明 |
+|------|------|------|
+| `label` | str | 槽位标签（如 `"T1"`），前端显示名称，也用于匹配 resource.name |
+| `visible` | bool | 是否在前端可见 |
+| `position` | dict | 物理坐标 `{x, y, z}`（mm），需自行测量计算偏移 |
+| `size` | dict | 槽位尺寸 `{width, height, depth}`（mm） |
+| `content_type` | list | 允许放入的物料类型，如 `["plate", "tip_rack", "tube_rack", "adaptor"]` |
+
+**参考实现：** `unilabos/devices/liquid_handling/prcxi/prcxi.py` 中的 `PRCXI9300Deck`（4x4 共 16 个 site）。
+
+---
+
+## 文件位置
+
+```
+unilabos/resources/
+├── <project>/              # 按项目分组
+│   ├── bottles.py          # Bottle 工厂函数
+│   ├── bottle_carriers.py  # Carrier 工厂函数
+│   ├── warehouses.py       # WareHouse 工厂函数
+│   └── decks.py            # Deck 类定义
+```
+
+---
+
+## 验证
+
+```bash
+# 资源可导入
+python -c "from unilabos.resources.my_project.bottles import My_Reagent_Bottle; print(My_Reagent_Bottle('test'))"
+
+# 启动测试（AST 自动扫描）
+unilab -g <graph>.json
+```
+
+仅在以下情况仍需 YAML：第三方库资源（如 pylabrobot 内置资源，无 `@resource` 装饰器）。
+
+---
+
+## 关键路径
+
+| 内容 | 路径 |
+|------|------|
+| Bottle/Carrier 基类 | `unilabos/resources/itemized_carrier.py` |
+| WareHouse 基类 + 工厂 | `unilabos/resources/warehouse.py` |
+| PLR 注册 | `unilabos/resources/plr_additional_res_reg.py` |
+| 装饰器定义 | `unilabos/registry/decorators.py` |

.cursor/skills/add-resource/reference.md

@@ -0,0 +1,292 @@
+# 资源高级参考
+
+本文件是 SKILL.md 的补充，包含类继承体系、序列化/反序列化、Bioyond 物料同步、非瓶类资源和仓库工厂模式。Agent 在需要实现这些功能时按需阅读。
+
+---
+
+## 1. 类继承体系
+
+```
+PyLabRobot
+├── Resource (PLR 基类)
+│   ├── Well
+│   │   └── Bottle (unilabos)        → 瓶/小瓶/烧杯/反应器
+│   ├── Deck
+│   │   └── 自定义 Deck 类 (unilabos) → 工作站台面
+│   ├── ResourceHolder               → 槽位占位符
+│   └── Container
+│       └── Battery (unilabos)       → 组装好的电池
+│
+├── ItemizedCarrier (unilabos, 继承 Resource)
+│   ├── BottleCarrier (unilabos)     → 瓶载架
+│   └── WareHouse (unilabos)         → 堆栈仓库
+│
+├── ItemizedResource (PLR)
+│   └── MagazineHolder (unilabos)    → 子弹夹载架
+│
+└── ResourceStack (PLR)
+    └── Magazine (unilabos)          → 子弹夹洞位
+```
+
+### Bottle 类细节
+
+```python
+class Bottle(Well):
+    def __init__(self, name, diameter, height, max_volume,
+                 size_x=0.0, size_y=0.0, size_z=0.0,
+                 barcode=None, category="container", model=None, **kwargs):
+        super().__init__(
+            name=name,
+            size_x=diameter,    # PLR 用 diameter 作为 size_x/size_y
+            size_y=diameter,
+            size_z=height,      # PLR 用 height 作为 size_z
+            max_volume=max_volume,
+            category=category,
+            model=model,
+            bottom_type="flat",
+            cross_section_type="circle"
+        )
+```
+
+注意 `size_x = size_y = diameter`，`size_z = height`。
+
+### ItemizedCarrier 核心方法
+
+| 方法 | 说明 |
+|------|------|
+| `__getitem__(identifier)` | 通过索引或 Excel 标识（如 `"A01"`）访问槽位 |
+| `__setitem__(identifier, resource)` | 向槽位放入资源 |
+| `get_child_identifier(child)` | 获取子资源的标识符 |
+| `capacity` | 总槽位数 |
+| `sites` | 所有槽位字典 |
+
+---
+
+## 2. 序列化与反序列化
+
+### PLR ↔ UniLab 转换
+
+| 函数 | 位置 | 方向 |
+|------|------|------|
+| `ResourceTreeSet.from_plr_resources(resources)` | `resource_tracker.py` | PLR → UniLab |
+| `ResourceTreeSet.to_plr_resources()` | `resource_tracker.py` | UniLab → PLR |
+
+### `from_plr_resources` 流程
+
+```
+PLR Resource
+    ↓ build_uuid_mapping (递归生成 UUID)
+    ↓ resource.serialize() → dict
+    ↓ resource.serialize_all_state() → states
+    ↓ resource_plr_inner (递归构建 ResourceDictInstance)
+ResourceTreeSet
+```
+
+关键：每个 PLR 资源通过 `unilabos_uuid` 属性携带 UUID，`unilabos_extra` 携带扩展数据（如 `class` 名）。
+
+### `to_plr_resources` 流程
+
+```
+ResourceTreeSet
+    ↓ collect_node_data (收集 UUID、状态、扩展数据)
+    ↓ node_to_plr_dict (转为 PLR 字典格式)
+    ↓ find_subclass(type_name, PLRResource) (查找 PLR 子类)
+    ↓ sub_cls.deserialize(plr_dict) (反序列化)
+    ↓ loop_set_uuid, loop_set_extra (递归设置 UUID 和扩展)
+PLR Resource
+```
+
+### Bottle 序列化
+
+```python
+class Bottle(Well):
+    def serialize(self) -> dict:
+        data = super().serialize()
+        return {**data, "diameter": self.diameter, "height": self.height}
+
+    @classmethod
+    def deserialize(cls, data: dict, allow_marshal=False):
+        barcode_data = data.pop("barcode", None)
+        instance = super().deserialize(data, allow_marshal=allow_marshal)
+        if barcode_data and isinstance(barcode_data, str):
+            instance.barcode = barcode_data
+        return instance
+```
+
+---
+
+## 3. Bioyond 物料同步
+
+### 双向转换函数
+
+| 函数 | 位置 | 方向 |
+|------|------|------|
+| `resource_bioyond_to_plr(materials, type_mapping, deck)` | `graphio.py` | Bioyond → PLR |
+| `resource_plr_to_bioyond(resources, type_mapping, warehouse_mapping)` | `graphio.py` | PLR → Bioyond |
+
+### `resource_bioyond_to_plr` 流程
+
+```
+Bioyond 物料列表
+    ↓ reverse_type_mapping: {typeName → (model, UUID)}
+    ↓ 对每个物料:
+       typeName → 查映射 → model (如 "BIOYOND_PolymerStation_Reactor")
+       initialize_resource({"name": unique_name, "class": model})
+    ↓ 设置 unilabos_extra (material_bioyond_id, material_bioyond_name 等)
+    ↓ 处理 detail (子物料/坐标)
+    ↓ 按 locationName 放入 deck.warehouses 对应槽位
+PLR 资源列表
+```
+
+### `resource_plr_to_bioyond` 流程
+
+```
+PLR 资源列表
+    ↓ 遍历每个资源:
+       载架(capacity > 1): 生成 details 子物料 + 坐标
+       单瓶: 直接映射
+    ↓ type_mapping 查找 typeId
+    ↓ warehouse_mapping 查找位置 UUID
+    ↓ 组装 Bioyond 格式 (name, typeName, typeId, quantity, Parameters, locations)
+Bioyond 物料列表
+```
+
+### BioyondResourceSynchronizer
+
+工作站通过 `ResourceSynchronizer` 自动同步物料：
+
+```python
+class BioyondResourceSynchronizer(ResourceSynchronizer):
+    def sync_from_external(self) -> bool:
+        all_data = []
+        all_data.extend(api_client.stock_material('{"typeMode": 0}'))  # 耗材
+        all_data.extend(api_client.stock_material('{"typeMode": 1}'))  # 样品
+        all_data.extend(api_client.stock_material('{"typeMode": 2}'))  # 试剂
+        unilab_resources = resource_bioyond_to_plr(
+            all_data,
+            type_mapping=self.workstation.bioyond_config["material_type_mappings"],
+            deck=self.workstation.deck
+        )
+        # 更新 deck 上的资源
+```
+
+---
+
+## 4. 非瓶类资源
+
+### ElectrodeSheet（极片）
+
+路径：`unilabos/resources/battery/electrode_sheet.py`
+
+```python
+class ElectrodeSheet(ResourcePLR):
+    """片状材料（极片、隔膜、弹片、垫片等）"""
+    _unilabos_state = {
+        "diameter": 0.0,
+        "thickness": 0.0,
+        "mass": 0.0,
+        "material_type": "",
+        "color": "",
+        "info": "",
+    }
+```
+
+工厂函数：`PositiveCan`, `PositiveElectrode`, `NegativeCan`, `NegativeElectrode`, `SpringWasher`, `FlatWasher`, `AluminumFoil`
+
+### Battery（电池）
+
+```python
+class Battery(Container):
+    """组装好的电池"""
+    _unilabos_state = {
+        "color": "",
+        "electrolyte_name": "",
+        "open_circuit_voltage": 0.0,
+    }
+```
+
+### Magazine / MagazineHolder（子弹夹）
+
+```python
+class Magazine(ResourceStack):
+    """子弹夹洞位，可堆叠 ElectrodeSheet"""
+    # direction, max_sheets
+
+class MagazineHolder(ItemizedResource):
+    """多洞位子弹夹"""
+    # hole_diameter, hole_depth, max_sheets_per_hole
+```
+
+工厂函数 `magazine_factory()` 用 `create_homogeneous_resources` 生成洞位，可选预填 `ElectrodeSheet` 或 `Battery`。
+
+---
+
+## 5. 仓库工厂模式参考
+
+### 实际 warehouse 工厂函数示例
+
+```python
+# 行优先 4x4 仓库
+def bioyond_warehouse_1x4x4(name: str) -> WareHouse:
+    return warehouse_factory(
+        name=name,
+        num_items_x=4, num_items_y=4, num_items_z=1,
+        dx=10.0, dy=10.0, dz=10.0,
+        item_dx=147.0, item_dy=106.0, item_dz=130.0,
+        layout="row-major",  # A01,A02,A03,A04, B01,...
+    )
+
+# 右侧 4x4 仓库（列名偏移）
+def bioyond_warehouse_1x4x4_right(name: str) -> WareHouse:
+    return warehouse_factory(
+        name=name,
+        num_items_x=4, num_items_y=4, num_items_z=1,
+        dx=10.0, dy=10.0, dz=10.0,
+        item_dx=147.0, item_dy=106.0, item_dz=130.0,
+        col_offset=4,      # A05,A06,A07,A08
+        layout="row-major",
+    )
+
+# 竖向仓库（站内试剂存放）
+def bioyond_warehouse_reagent_storage(name: str) -> WareHouse:
+    return warehouse_factory(
+        name=name,
+        num_items_x=1, num_items_y=2, num_items_z=1,
+        dx=10.0, dy=10.0, dz=10.0,
+        item_dx=147.0, item_dy=106.0, item_dz=130.0,
+        layout="vertical-col-major",
+    )
+
+# 行偏移（F 行开始）
+def bioyond_warehouse_5x3x1(name: str, row_offset: int = 0) -> WareHouse:
+    return warehouse_factory(
+        name=name,
+        num_items_x=3, num_items_y=5, num_items_z=1,
+        dx=10.0, dy=10.0, dz=10.0,
+        item_dx=159.0, item_dy=183.0, item_dz=130.0,
+        row_offset=row_offset,  # 0→A行起，5→F行起
+        layout="row-major",
+    )
+```
+
+### layout 类型说明
+
+| layout | 命名顺序 | 适用场景 |
+|--------|---------|---------|
+| `col-major` (默认) | A01,B01,C01,D01, A02,B02,... | 列优先，标准堆栈 |
+| `row-major` | A01,A02,A03,A04, B01,B02,... | 行优先，Bioyond 前端展示 |
+| `vertical-col-major` | 竖向排列，标签从底部开始 | 竖向仓库（试剂存放、测密度） |
+
+---
+
+## 6. 关键路径
+
+| 内容 | 路径 |
+|------|------|
+| Bottle/Carrier 基类 | `unilabos/resources/itemized_carrier.py` |
+| WareHouse 类 + 工厂 | `unilabos/resources/warehouse.py` |
+| ResourceTreeSet 转换 | `unilabos/resources/resource_tracker.py` |
+| Bioyond 物料转换 | `unilabos/resources/graphio.py` |
+| Bioyond 仓库定义 | `unilabos/resources/bioyond/warehouses.py` |
+| 电池资源 | `unilabos/resources/battery/` |
+| PLR 注册 | `unilabos/resources/plr_additional_res_reg.py` |

.cursor/skills/add-workstation/SKILL.md

@@ -0,0 +1,626 @@
+---
+name: add-workstation
+description: Guide for adding new workstations to Uni-Lab-OS (接入新工作站). Uses @device decorator + AST auto-scanning. Walks through workstation type, sub-device composition, driver creation, deck setup, and graph file. Use when the user wants to add a workstation, create a workstation driver, configure a station with sub-devices, or mentions 工作站/工站/station/workstation.
+---
+
+# Uni-Lab-OS 工作站接入指南
+
+工作站（workstation）是组合多个子设备的大型设备，拥有独立的物料管理系统和工作流引擎。使用 `@device` 装饰器注册，AST 自动扫描生成注册表。
+
+---
+
+## 工作站类型
+
+| 类型                | 基类              | 适用场景                           |
+| ------------------- | ----------------- | ---------------------------------- |
+| **Protocol 工作站** | `ProtocolNode`    | 标准化学操作协议（泵转移、过滤等） |
+| **外部系统工作站**  | `WorkstationBase` | 与外部 LIMS/MES 对接               |
+| **硬件控制工作站**  | `WorkstationBase` | 直接控制 PLC/硬件                  |
+
+---
+
+## @device 装饰器（工作站）
+
+工作站也使用 `@device` 装饰器注册，参数与普通设备一致：
+
+```python
+@device(
+    id="my_workstation",           # 注册表唯一标识（必填）
+    category=["workstation"],      # 分类标签
+    description="我的工作站",
+)
+```
+
+如果一个工作站类支持多个具体变体，可使用 `ids` / `id_meta`，与设备的用法相同（参见 add-device SKILL）。
+
+---
+
+## 工作站驱动模板
+
+### 模板 A：基于外部系统的工作站
+
+```python
+import logging
+from typing import Dict, Any, Optional
+from pylabrobot.resources import Deck
+
+from unilabos.registry.decorators import device, topic_config, not_action
+from unilabos.devices.workstation.workstation_base import WorkstationBase
+
+try:
+    from unilabos.ros.nodes.presets.workstation import ROS2WorkstationNode
+except ImportError:
+    ROS2WorkstationNode = None
+
+
+@device(id="my_workstation", category=["workstation"], description="我的工作站")
+class MyWorkstation(WorkstationBase):
+    _ros_node: "ROS2WorkstationNode"
+
+    def __init__(self, config=None, deck=None, protocol_type=None, **kwargs):
+        super().__init__(deck=deck, **kwargs)
+        self.config = config or {}
+        self.logger = logging.getLogger("MyWorkstation")
+        self.api_host = self.config.get("api_host", "")
+        self._status = "Idle"
+
+    @not_action
+    def post_init(self, ros_node: "ROS2WorkstationNode"):
+        super().post_init(ros_node)
+        self._ros_node = ros_node
+
+    async def scheduler_start(self, **kwargs) -> Dict[str, Any]:
+        """注册为工作站动作"""
+        return {"success": True}
+
+    async def create_order(self, json_str: str, **kwargs) -> Dict[str, Any]:
+        """注册为工作站动作"""
+        return {"success": True}
+
+    @property
+    @topic_config()
+    def workflow_sequence(self) -> str:
+        return "[]"
+
+    @property
+    @topic_config()
+    def material_info(self) -> str:
+        return "{}"
+```
+
+### 模板 B：Protocol 工作站
+
+直接使用 `ProtocolNode`，通常不需要自定义驱动类：
+
+```python
+from unilabos.devices.workstation.workstation_base import ProtocolNode
+```
+
+在图文件中配置 `protocol_type` 即可。
+
+---
+
+## 子设备访问（sub_devices）
+
+工站初始化子设备后，所有子设备实例存储在 `self._ros_node.sub_devices` 字典中（key 为设备 id，value 为 `ROS2DeviceNode` 实例）。工站的驱动类可以直接获取子设备实例来调用其方法：
+
+```python
+# 在工站驱动类的方法中访问子设备
+sub = self._ros_node.sub_devices["pump_1"]
+
+# .driver_instance — 子设备的驱动实例（即设备 Python 类的实例）
+sub.driver_instance.some_method(arg1, arg2)
+
+# .ros_node_instance — 子设备的 ROS2 节点实例
+sub.ros_node_instance._action_value_mappings  # 查看子设备支持的 action
+```
+
+**常见用法**：
+
+```python
+class MyWorkstation(WorkstationBase):
+    def my_protocol(self, **kwargs):
+        # 获取子设备驱动实例
+        pump = self._ros_node.sub_devices["pump_1"].driver_instance
+        heater = self._ros_node.sub_devices["heater_1"].driver_instance
+
+        # 直接调用子设备方法
+        pump.aspirate(volume=100)
+        heater.set_temperature(80)
+```
+
+> 参考实现：`unilabos/devices/workstation/bioyond_studio/reaction_station/reaction_station.py` 中通过 `self._ros_node.sub_devices.get(reactor_id)` 获取子反应器实例并更新数据。
+
+---
+
+## 硬件通信接口（hardware_interface）
+
+硬件控制型工作站通常需要通过串口（Serial）、Modbus 等通信协议控制多个子设备。Uni-Lab-OS 通过 **通信设备代理** 机制实现端口共享：一个串口只创建一个 `serial` 节点，多个子设备共享这个通信实例。
+
+### 工作原理
+
+`ROS2WorkstationNode` 初始化时分两轮遍历子设备（`workstation.py`）：
+
+**第一轮 — 初始化所有子设备**：按 `children` 顺序调用 `initialize_device()`，通信设备（`serial_` / `io_` 开头的 id）优先完成初始化，创建 `serial.Serial()` 实例。其他子设备此时 `self.hardware_interface = "serial_pump"`（字符串）。
+
+**第二轮 — 代理替换**：遍历所有已初始化的子设备，读取子设备的 `_hardware_interface` 配置：
+
+```
+hardware_interface = d.ros_node_instance._hardware_interface
+# → {"name": "hardware_interface", "read": "send_command", "write": "send_command"}
+```
+
+1. 取 `name` 字段对应的属性值：`name_value = getattr(driver, hardware_interface["name"])`
+   - 如果 `name_value` 是字符串且该字符串是某个子设备的 id → 触发代理替换
+2. 从通信设备获取真正的 `read`/`write` 方法
+3. 用 `setattr(driver, read_method, _read)` 将通信设备的方法绑定到子设备上
+
+因此：
+
+- **通信设备 id 必须与子设备 config 中填的字符串完全一致**（如 `"serial_pump"`）
+- **通信设备 id 必须以 `serial_` 或 `io_` 开头**（否则第一轮不会被识别为通信设备）
+- **通信设备必须在 `children` 列表中排在最前面**，确保先初始化
+
+### HardwareInterface 参数说明
+
+```python
+from unilabos.registry.decorators import HardwareInterface
+
+HardwareInterface(
+    name="hardware_interface",   # __init__ 中接收通信实例的属性名
+    read="send_command",         # 通信设备上暴露的读方法名
+    write="send_command",        # 通信设备上暴露的写方法名
+    extra_info=["list_ports"],   # 可选：额外暴露的方法
+)
+```
+
+**`name` 字段的含义**：对应设备类 `__init__` 中，用于保存通信实例的**属性名**。系统据此知道要替换哪个属性。大部分设备直接用 `"hardware_interface"`，也可以自定义（如 `"io_device_port"`）。
+
+### 示例 1：泵（name="hardware_interface"）
+
+```python
+from unilabos.registry.decorators import device, HardwareInterface
+
+@device(
+    id="my_pump",
+    category=["pump_and_valve"],
+    hardware_interface=HardwareInterface(
+        name="hardware_interface",
+        read="send_command",
+        write="send_command",
+    ),
+)
+class MyPump:
+    def __init__(self, port=None, address="1", **kwargs):
+        # name="hardware_interface" → 系统替换 self.hardware_interface
+        self.hardware_interface = port  # 初始为字符串 "serial_pump"，启动后被替换为 Serial 实例
+        self.address = address
+
+    def send_command(self, command: str):
+        full_command = f"/{self.address}{command}\r\n"
+        self.hardware_interface.write(bytearray(full_command, "ascii"))
+        return self.hardware_interface.read_until(b"\n")
+```
+
+### 示例 2：电磁阀（name="io_device_port"，自定义属性名）
+
+```python
+@device(
+    id="solenoid_valve",
+    category=["pump_and_valve"],
+    hardware_interface=HardwareInterface(
+        name="io_device_port",       # 自定义属性名 → 系统替换 self.io_device_port
+        read="read_io_coil",
+        write="write_io_coil",
+    ),
+)
+class SolenoidValve:
+    def __init__(self, io_device_port: str = None, **kwargs):
+        # name="io_device_port" → 图文件 config 中用 "io_device_port": "io_board_1"
+        self.io_device_port = io_device_port  # 初始为字符串，系统替换为 Modbus 实例
+```
+
+### Serial 通信设备（class="serial"）
+
+`serial` 是 Uni-Lab-OS 内置的通信代理设备，代码位于 `unilabos/ros/nodes/presets/serial_node.py`：
+
+```python
+from serial import Serial, SerialException
+from threading import Lock
+
+class ROS2SerialNode(BaseROS2DeviceNode):
+    def __init__(self, device_id, registry_name, port: str, baudrate: int = 9600, **kwargs):
+        self.port = port
+        self.baudrate = baudrate
+        self._hardware_interface = {
+            "name": "hardware_interface",
+            "write": "send_command",
+            "read": "read_data",
+        }
+        self._query_lock = Lock()
+
+        self.hardware_interface = Serial(baudrate=baudrate, port=port)
+
+        BaseROS2DeviceNode.__init__(
+            self, driver_instance=self, registry_name=registry_name,
+            device_id=device_id, status_types={}, action_value_mappings={},
+            hardware_interface=self._hardware_interface, print_publish=False,
+        )
+        self.create_service(SerialCommand, "serialwrite", self.handle_serial_request)
+
+    def send_command(self, command: str):
+        with self._query_lock:
+            self.hardware_interface.write(bytearray(f"{command}\n", "ascii"))
+            return self.hardware_interface.read_until(b"\n").decode()
+
+    def read_data(self):
+        with self._query_lock:
+            return self.hardware_interface.read_until(b"\n").decode()
+```
+
+在图文件中使用 `"class": "serial"` 即可创建串口代理：
+
+```json
+{
+  "id": "serial_pump",
+  "class": "serial",
+  "parent": "my_station",
+  "config": { "port": "COM7", "baudrate": 9600 }
+}
+```
+
+### 图文件配置
+
+**通信设备必须在 `children` 列表中排在最前面**，确保先于其他子设备初始化：
+
+```json
+{
+  "nodes": [
+    {
+      "id": "my_station",
+      "class": "workstation",
+      "children": ["serial_pump", "pump_1", "pump_2"],
+      "config": { "protocol_type": ["PumpTransferProtocol"] }
+    },
+    {
+      "id": "serial_pump",
+      "class": "serial",
+      "parent": "my_station",
+      "config": { "port": "COM7", "baudrate": 9600 }
+    },
+    {
+      "id": "pump_1",
+      "class": "syringe_pump_with_valve.runze.SY03B-T08",
+      "parent": "my_station",
+      "config": { "port": "serial_pump", "address": "1", "max_volume": 25.0 }
+    },
+    {
+      "id": "pump_2",
+      "class": "syringe_pump_with_valve.runze.SY03B-T08",
+      "parent": "my_station",
+      "config": { "port": "serial_pump", "address": "2", "max_volume": 25.0 }
+    }
+  ],
+  "links": [
+    {
+      "source": "pump_1",
+      "target": "serial_pump",
+      "type": "communication",
+      "port": { "pump_1": "port", "serial_pump": "port" }
+    },
+    {
+      "source": "pump_2",
+      "target": "serial_pump",
+      "type": "communication",
+      "port": { "pump_2": "port", "serial_pump": "port" }
+    }
+  ]
+}
+```
+
+### 通信协议速查
+
+| 协议                 | config 参数                    | 依赖包     | 通信设备 class             |
+| -------------------- | ------------------------------ | ---------- | -------------------------- |
+| Serial (RS232/RS485) | `port`, `baudrate`             | `pyserial` | `serial`                   |
+| Modbus RTU           | `port`, `baudrate`, `slave_id` | `pymodbus` | `device_comms/modbus_plc/` |
+| Modbus TCP           | `host`, `port`, `slave_id`     | `pymodbus` | `device_comms/modbus_plc/` |
+| TCP Socket           | `host`, `port`                 | stdlib     | 自定义                     |
+| HTTP API             | `url`, `token`                 | `requests` | `device_comms/rpc.py`      |
+
+参考实现：`unilabos/test/experiments/Grignard_flow_batchreact_single_pumpvalve.json`
+
+---
+
+## Deck 与物料生命周期
+
+### 1. Deck 入参与两种初始化模式
+
+系统根据设备节点 `config.deck` 的写法，自动反序列化 Deck 实例后传入 `__init__` 的 `deck` 参数。目前 `deck` 是固定字段名，只支持一个主 Deck。建议一个设备拥有一个台面，台面上抽象二级、三级子物料。
+
+有两种初始化模式：
+
+#### init 初始化（推荐）
+
+`config.deck` 直接包含 `_resource_type` + `_resource_child_name`，系统先用 Deck 节点的 `config` 调用 Deck 类的 `__init__` 反序列化，再将实例传入设备的 `deck` 参数。子物料随 Deck 的 `children` 一起反序列化。
+
+```json
+"config": {
+    "deck": {
+        "_resource_type": "unilabos.devices.liquid_handling.prcxi.prcxi:PRCXI9300Deck",
+        "_resource_child_name": "PRCXI_Deck"
+    }
+}
+```
+
+#### deserialize 初始化
+
+`config.deck` 用 `data` 包裹一层，系统走 `deserialize` 路径，可传入更多参数（如 `allow_marshal` 等）：
+
+```json
+"config": {
+    "deck": {
+        "data": {
+            "_resource_child_name": "YB_Bioyond_Deck",
+            "_resource_type": "unilabos.resources.bioyond.decks:BIOYOND_YB_Deck"
+        }
+    }
+}
+```
+
+没有特殊需求时推荐 init 初始化。
+
+#### config.deck 字段说明
+
+| 字段 | 说明 |
+|------|------|
+| `_resource_type` | Deck 类的完整模块路径（`module:ClassName`） |
+| `_resource_child_name` | 对应图文件中 Deck 节点的 `id`，建立父子关联 |
+
+#### 设备 __init__ 接收
+
+```python
+def __init__(self, config=None, deck=None, protocol_type=None, **kwargs):
+    super().__init__(deck=deck, **kwargs)
+    # deck 已经是反序列化后的 Deck 实例
+    # → PRCXI9300Deck / BIOYOND_YB_Deck 等
+```
+
+#### Deck 节点（图文件中）
+
+Deck 节点作为设备的 `children` 之一，`parent` 指向设备 id：
+
+```json
+{
+    "id": "PRCXI_Deck",
+    "parent": "PRCXI",
+    "type": "deck",
+    "class": "",
+    "children": [],
+    "config": {
+        "type": "PRCXI9300Deck",
+        "size_x": 542, "size_y": 374, "size_z": 0,
+        "category": "deck",
+        "sites": [...]
+    },
+    "data": {}
+}
+```
+
+- `config` 中的字段会传入 Deck 类的 `__init__`（因此 `__init__` 必须能接受所有 `serialize()` 输出的字段）
+- `children` 初始为空时，由同步器或手动初始化填充
+- `config.type` 填 Deck 类名
+
+### 2. Deck 为空时自行初始化
+
+如果 Deck 节点的 `children` 为空，工作站需在 `post_init` 或首次同步时自行初始化内容：
+
+```python
+@not_action
+def post_init(self, ros_node):
+    super().post_init(ros_node)
+    if self.deck and not self.deck.children:
+        self._initialize_default_deck()
+
+def _initialize_default_deck(self):
+    from my_labware import My_TipRack, My_Plate
+    self.deck.assign_child_resource(My_TipRack("T1"), spot=0)
+    self.deck.assign_child_resource(My_Plate("T2"), spot=1)
+```
+
+### 3. 物料双向同步
+
+当工作站对接外部系统（LIMS/MES）时，需要实现 `ResourceSynchronizer` 处理双向物料同步：
+
+```python
+from unilabos.devices.workstation.workstation_base import ResourceSynchronizer
+
+class MyResourceSynchronizer(ResourceSynchronizer):
+    def sync_from_external(self) -> bool:
+        """从外部系统同步到 self.workstation.deck"""
+        external_data = self._query_external_materials()
+        # 以外部工站为准：根据外部数据反向创建 PLR 资源实例
+        for item in external_data:
+            cls = self._resolve_resource_class(item["type"])
+            resource = cls(name=item["name"], **item["params"])
+            self.workstation.deck.assign_child_resource(resource, spot=item["slot"])
+        return True
+
+    def sync_to_external(self, resource) -> bool:
+        """将 UniLab 侧物料变更同步到外部系统"""
+        # 以 UniLab 为准：将 PLR 资源转为外部格式并推送
+        external_format = self._convert_to_external(resource)
+        return self._push_to_external(external_format)
+
+    def handle_external_change(self, change_info) -> bool:
+        """处理外部系统主动推送的变更"""
+        return True
+```
+
+同步策略取决于业务场景：
+
+- **以外部工站为准**：从外部 API 查询物料数据，反向创建对应的 PLR 资源实例放到 Deck 上
+- **以 UniLab 为准**：UniLab 侧的物料变更通过 `sync_to_external` 推送到外部系统
+
+在工作站 `post_init` 中初始化同步器：
+
+```python
+@not_action
+def post_init(self, ros_node):
+    super().post_init(ros_node)
+    self.resource_synchronizer = MyResourceSynchronizer(self)
+    self.resource_synchronizer.sync_from_external()
+```
+
+### 4. 序列化与持久化（serialize / serialize_state）
+
+资源类需正确实现序列化，系统据此完成持久化和前端同步。
+
+**`serialize()`** — 输出资源的结构信息（`config` 层），反序列化时作为 `__init__` 的入参回传。因此 **`__init__` 必须通过 `**kwargs`接受`serialize()` 输出的所有字段\*\*，即使当前不使用：
+
+```python
+class MyDeck(Deck):
+    def __init__(self, name, size_x, size_y, size_z,
+                 sites=None,          # serialize() 输出的字段
+                 rotation=None,       # serialize() 输出的字段
+                 barcode=None,        # serialize() 输出的字段
+                 **kwargs):           # 兜底：接受所有未知的 serialize 字段
+        super().__init__(size_x, size_y, size_z, name)
+        # ...
+
+    def serialize(self) -> dict:
+        data = super().serialize()
+        data["sites"] = [...]  # 自定义字段
+        return data
+```
+
+**`serialize_state()`** — 输出资源的运行时状态（`data` 层），用于持久化可变信息。`data` 中的内容会被正确保存和恢复：
+
+```python
+class MyPlate(Plate):
+    def __init__(self, name, size_x, size_y, size_z,
+                 material_info=None, **kwargs):
+        super().__init__(name, size_x, size_y, size_z, **kwargs)
+        self._unilabos_state = {}
+        if material_info:
+            self._unilabos_state["Material"] = material_info
+
+    def serialize_state(self) -> Dict[str, Any]:
+        data = super().serialize_state()
+        data.update(self._unilabos_state)
+        return data
+```
+
+关键要点：
+
+- `serialize()` 输出的所有字段都会作为 `config` 回传到 `__init__`，所以 `__init__` 必须能接受它们（显式声明或 `**kwargs`）
+- `serialize_state()` 输出的 `data` 用于持久化运行时状态（如物料信息、液体量等）
+- `_unilabos_state` 中只存可 JSON 序列化的基本类型（str, int, float, bool, list, dict, None）
+
+### 5. 子物料自动同步
+
+子物料（Bottle、Plate、TipRack 等）放到 Deck 上后，系统会自动将其同步到前端的 Deck 视图。只需保证资源类正确实现了 `serialize()` / `serialize_state()` 和反序列化即可。
+
+### 6. 图文件配置（参考 prcxi_9320_slim.json）
+
+```json
+{
+  "nodes": [
+    {
+      "id": "my_station",
+      "type": "device",
+      "class": "my_workstation",
+      "config": {
+        "deck": {
+          "_resource_type": "unilabos.resources.my_module:MyDeck",
+          "_resource_child_name": "my_deck"
+        },
+        "host": "10.20.30.1",
+        "port": 9999
+      }
+    },
+    {
+      "id": "my_deck",
+      "parent": "my_station",
+      "type": "deck",
+      "class": "",
+      "children": [],
+      "config": {
+        "type": "MyLabDeck",
+        "size_x": 542,
+        "size_y": 374,
+        "size_z": 0,
+        "category": "deck",
+        "sites": [
+          {
+            "label": "T1",
+            "visible": true,
+            "occupied_by": null,
+            "position": { "x": 0, "y": 0, "z": 0 },
+            "size": { "width": 128.0, "height": 86, "depth": 0 },
+            "content_type": ["plate", "tip_rack", "tube_rack", "adaptor"]
+          }
+        ]
+      },
+      "data": {}
+    }
+  ],
+  "edges": []
+}
+```
+
+Deck 节点要点：
+
+- `config.type` 填 Deck 类名（如 `"PRCXI9300Deck"`）
+- `config.sites` 完整列出所有 site（从 Deck 类的 `serialize()` 输出获取）
+- `children` 初始为空（由同步器或手动初始化填充）
+- 设备节点 `config.deck._resource_type` 指向 Deck 类的完整模块路径
+
+---
+
+## 子设备
+
+子设备按标准设备接入流程创建（参见 add-device SKILL），使用 `@device` 装饰器。
+
+子设备约束：
+
+- 图文件中 `parent` 指向工作站 ID
+- 在工作站 `children` 数组中列出
+
+---
+
+## 关键规则
+
+1. **`__init__` 必须接受 `deck` 和 `**kwargs`** — `WorkstationBase.**init**`需要`deck` 参数
+2. **Deck 通过 `config.deck._resource_type` 反序列化传入** — 不要在 `__init__` 中手动创建 Deck
+3. **Deck 为空时自行初始化内容** — 在 `post_init` 中检查并填充默认物料
+4. **外部同步实现 `ResourceSynchronizer`** — `sync_from_external` / `sync_to_external`
+5. **通过 `self._children` 访问子设备** — 不要自行维护子设备引用
+6. **`post_init` 中启动后台服务** — 不要在 `__init__` 中启动网络连接
+7. **异步方法使用 `await self._ros_node.sleep()`** — 禁止 `time.sleep()` 和 `asyncio.sleep()`
+8. **使用 `@not_action` 标记非动作方法** — `post_init`, `initialize`, `cleanup`
+9. **子物料保证正确 serialize/deserialize** — 系统自动同步到前端 Deck 视图
+
+---
+
+## 验证
+
+```bash
+# 模块可导入
+python -c "from unilabos.devices.workstation.<name>.<name> import <ClassName>"
+
+# 启动测试（AST 自动扫描）
+unilab -g <graph>.json
+```
+
+---
+
+## 现有工作站参考
+
+| 工作站         | 驱动类                        | 类型     |
+| -------------- | ----------------------------- | -------- |
+| Protocol 通用  | `ProtocolNode`                | Protocol |
+| Bioyond 反应站 | `BioyondReactionStation`      | 外部系统 |
+| 纽扣电池组装   | `CoinCellAssemblyWorkstation` | 硬件控制 |
+
+参考路径：`unilabos/devices/workstation/` 目录下各工作站实现。

.cursor/skills/add-workstation/reference.md

@@ -0,0 +1,371 @@
+# 工作站高级模式参考
+
+本文件是 SKILL.md 的补充，包含外部系统集成、物料同步、配置结构等高级模式。
+Agent 在需要实现这些功能时按需阅读。
+
+---
+
+## 1. 外部系统集成模式
+
+### 1.1 RPC 客户端
+
+与外部 LIMS/MES 系统通信的标准模式。继承 `BaseRequest`，所有接口统一用 POST。
+
+```python
+from unilabos.device_comms.rpc import BaseRequest
+
+
+class MySystemRPC(BaseRequest):
+    """外部系统 RPC 客户端"""
+
+    def __init__(self, host: str, api_key: str):
+        super().__init__(host)
+        self.api_key = api_key
+
+    def _request(self, endpoint: str, data: dict = None) -> dict:
+        return self.post(
+            url=f"{self.host}/api/{endpoint}",
+            params={
+                "apiKey": self.api_key,
+                "requestTime": self.get_current_time_iso8601(),
+                "data": data or {},
+            },
+        )
+
+    def query_status(self) -> dict:
+        return self._request("status/query")
+
+    def create_order(self, order_data: dict) -> dict:
+        return self._request("order/create", order_data)
+```
+
+参考：`unilabos/devices/workstation/bioyond_studio/bioyond_rpc.py`（`BioyondV1RPC`）
+
+### 1.2 HTTP 回调服务
+
+接收外部系统报送的标准模式。使用 `WorkstationHTTPService`，在 `post_init` 中启动。
+
+```python
+from unilabos.devices.workstation.workstation_http_service import WorkstationHTTPService
+
+
+class MyWorkstation(WorkstationBase):
+    def __init__(self, config=None, deck=None, **kwargs):
+        super().__init__(deck=deck, **kwargs)
+        self.config = config or {}
+        http_cfg = self.config.get("http_service_config", {})
+        self._http_service_config = {
+            "host": http_cfg.get("http_service_host", "127.0.0.1"),
+            "port": http_cfg.get("http_service_port", 8080),
+        }
+        self.http_service = None
+
+    def post_init(self, ros_node):
+        super().post_init(ros_node)
+        self.http_service = WorkstationHTTPService(
+            workstation_instance=self,
+            host=self._http_service_config["host"],
+            port=self._http_service_config["port"],
+        )
+        self.http_service.start()
+```
+
+**HTTP 服务路由**（固定端点，由 `WorkstationHTTPHandler` 自动分发）：
+
+| 端点 | 调用的工作站方法 |
+|------|-----------------|
+| `/report/step_finish` | `process_step_finish_report(report_request)` |
+| `/report/sample_finish` | `process_sample_finish_report(report_request)` |
+| `/report/order_finish` | `process_order_finish_report(report_request, used_materials)` |
+| `/report/material_change` | `process_material_change_report(report_data)` |
+| `/report/error_handling` | `handle_external_error(error_data)` |
+
+实现对应方法即可接收回调：
+
+```python
+def process_step_finish_report(self, report_request) -> Dict[str, Any]:
+    """处理步骤完成报告"""
+    step_name = report_request.data.get("stepName")
+    return {"success": True, "message": f"步骤 {step_name} 已处理"}
+
+def process_order_finish_report(self, report_request, used_materials) -> Dict[str, Any]:
+    """处理订单完成报告"""
+    order_code = report_request.data.get("orderCode")
+    return {"success": True}
+```
+
+参考：`unilabos/devices/workstation/workstation_http_service.py`
+
+### 1.3 连接监控
+
+独立线程周期性检测外部系统连接状态，状态变化时发布 ROS 事件。
+
+```python
+class ConnectionMonitor:
+    def __init__(self, workstation, check_interval=30):
+        self.workstation = workstation
+        self.check_interval = check_interval
+        self._running = False
+        self._thread = None
+
+    def start(self):
+        self._running = True
+        self._thread = threading.Thread(target=self._monitor_loop, daemon=True)
+        self._thread.start()
+
+    def _monitor_loop(self):
+        while self._running:
+            try:
+                # 调用外部系统接口检测连接
+                self.workstation.hardware_interface.ping()
+                status = "online"
+            except Exception:
+                status = "offline"
+            time.sleep(self.check_interval)
+```
+
+参考：`unilabos/devices/workstation/bioyond_studio/station.py`（`ConnectionMonitor`）
+
+---
+
+## 2. Config 结构模式
+
+工作站的 `config` 在图文件中定义，传入 `__init__`。以下是常见字段模式：
+
+### 2.1 外部系统连接
+
+```json
+{
+    "api_host": "http://192.168.1.100:8080",
+    "api_key": "YOUR_API_KEY"
+}
+```
+
+### 2.2 HTTP 回调服务
+
+```json
+{
+    "http_service_config": {
+        "http_service_host": "127.0.0.1",
+        "http_service_port": 8080
+    }
+}
+```
+
+### 2.3 物料类型映射
+
+将 PLR 资源类名映射到外部系统的物料类型（名称 + UUID）。用于双向物料转换。
+
+```json
+{
+    "material_type_mappings": {
+        "PLR_ResourceClassName": ["外部系统显示名", "external-type-uuid"],
+        "BIOYOND_PolymerStation_Reactor": ["反应器", "3a14233b-902d-0d7b-..."]
+    }
+}
+```
+
+### 2.4 仓库映射
+
+将仓库名映射到外部系统的仓库 UUID 和库位 UUID。用于入库/出库操作。
+
+```json
+{
+    "warehouse_mapping": {
+        "仓库名": {
+            "uuid": "warehouse-uuid",
+            "site_uuids": {
+                "A01": "site-uuid-A01",
+                "A02": "site-uuid-A02"
+            }
+        }
+    }
+}
+```
+
+### 2.5 工作流映射
+
+将内部工作流名映射到外部系统的工作流 ID。
+
+```json
+{
+    "workflow_mappings": {
+        "internal_workflow_name": "external-workflow-uuid"
+    }
+}
+```
+
+### 2.6 物料默认参数
+
+```json
+{
+    "material_default_parameters": {
+        "NMP": {
+            "unit": "毫升",
+            "density": "1.03",
+            "densityUnit": "g/mL",
+            "description": "N-甲基吡咯烷酮"
+        }
+    }
+}
+```
+
+---
+
+## 3. 资源同步机制
+
+### 3.1 ResourceSynchronizer
+
+抽象基类，用于与外部物料系统双向同步。定义在 `workstation_base.py`。
+
+```python
+from unilabos.devices.workstation.workstation_base import ResourceSynchronizer
+
+
+class MyResourceSynchronizer(ResourceSynchronizer):
+    def __init__(self, workstation, api_client):
+        super().__init__(workstation)
+        self.api_client = api_client
+
+    def sync_from_external(self) -> bool:
+        """从外部系统拉取物料到 deck"""
+        external_materials = self.api_client.list_materials()
+        for material in external_materials:
+            plr_resource = self._convert_to_plr(material)
+            self.workstation.deck.assign_child_resource(plr_resource, coordinate)
+        return True
+
+    def sync_to_external(self, plr_resource) -> bool:
+        """将 deck 中的物料变更推送到外部系统"""
+        external_data = self._convert_from_plr(plr_resource)
+        self.api_client.update_material(external_data)
+        return True
+
+    def handle_external_change(self, change_info) -> bool:
+        """处理外部系统推送的物料变更"""
+        return True
+```
+
+### 3.2 update_resource — 上传资源树到云端
+
+将 PLR Deck 序列化后通过 ROS 服务上传。典型使用场景：
+
+```python
+# 在 post_init 中上传初始 deck
+from unilabos.ros.nodes.base_device_node import ROS2DeviceNode
+
+ROS2DeviceNode.run_async_func(
+    self._ros_node.update_resource, True,
+    **{"resources": [self.deck]}
+)
+
+# 在动作方法中更新特定资源
+ROS2DeviceNode.run_async_func(
+    self._ros_node.update_resource, True,
+    **{"resources": [updated_plate]}
+)
+```
+
+---
+
+## 4. 工作流序列管理
+
+工作站通过 `workflow_sequence` 属性管理任务队列（JSON 字符串形式）。
+
+```python
+class MyWorkstation(WorkstationBase):
+    def __init__(self, **kwargs):
+        super().__init__(**kwargs)
+        self._workflow_sequence = []
+
+    @property
+    def workflow_sequence(self) -> str:
+        """返回 JSON 字符串，ROS 自动发布"""
+        import json
+        return json.dumps(self._workflow_sequence)
+
+    async def append_to_workflow_sequence(self, workflow_name: str) -> Dict[str, Any]:
+        """添加工作流到队列"""
+        self._workflow_sequence.append({
+            "name": workflow_name,
+            "status": "pending",
+            "created_at": time.time(),
+        })
+        return {"success": True}
+
+    async def clear_workflows(self) -> Dict[str, Any]:
+        """清空工作流队列"""
+        self._workflow_sequence = []
+        return {"success": True}
+```
+
+---
+
+## 5. 站间物料转移
+
+工作站之间转移物料的模式。通过 ROS ActionClient 调用目标站的动作。
+
+```python
+async def transfer_materials_to_another_station(
+    self,
+    target_device_id: str,
+    transfer_groups: list,
+    **kwargs,
+) -> Dict[str, Any]:
+    """将物料转移到另一个工作站"""
+    target_node = self._children.get(target_device_id)
+    if not target_node:
+        # 通过 ROS 节点查找非子设备的目标站
+        pass
+
+    for group in transfer_groups:
+        resource = self.find_resource_by_name(group["resource_name"])
+        # 从本站 deck 移除
+        resource.unassign()
+        # 调用目标站的接收方法
+        # ...
+
+    return {"success": True, "transferred": len(transfer_groups)}
+```
+
+参考：`BioyondDispensingStation.transfer_materials_to_reaction_station`
+
+---
+
+## 6. post_init 完整模式
+
+`post_init` 是工作站初始化的关键阶段，此时 ROS 节点和子设备已就绪。
+
+```python
+def post_init(self, ros_node):
+    super().post_init(ros_node)
+
+    # 1. 初始化外部系统客户端（此时 config 已可用）
+    self.rpc_client = MySystemRPC(
+        host=self.config.get("api_host"),
+        api_key=self.config.get("api_key"),
+    )
+    self.hardware_interface = self.rpc_client
+
+    # 2. 启动连接监控
+    self.connection_monitor = ConnectionMonitor(self)
+    self.connection_monitor.start()
+
+    # 3. 启动 HTTP 回调服务
+    if hasattr(self, '_http_service_config'):
+        self.http_service = WorkstationHTTPService(
+            workstation_instance=self,
+            host=self._http_service_config["host"],
+            port=self._http_service_config["port"],
+        )
+        self.http_service.start()
+
+    # 4. 上传 deck 到云端
+    ROS2DeviceNode.run_async_func(
+        self._ros_node.update_resource, True,
+        **{"resources": [self.deck]}
+    )
+
+    # 5. 初始化资源同步器（可选）
+    self.resource_synchronizer = MyResourceSynchronizer(self, self.rpc_client)
+```

.cursor/skills/batch-insert-reagent/SKILL.md

@@ -0,0 +1,261 @@
+---
+name: batch-insert-reagent
+description: Batch insert reagents into Uni-Lab platform — add chemicals with CAS, SMILES, supplier info. Use when the user wants to add reagents, insert chemicals, batch register reagents, or mentions 录入试剂/添加试剂/试剂入库/reagent.
+---
+
+# 批量录入试剂 Skill
+
+通过云端 API 批量录入试剂信息，支持逐条或批量操作。
+
+## 前置条件（缺一不可）
+
+使用本 skill 前，**必须**先确认以下信息。如果缺少任何一项，**立即向用户询问并终止**，等补齐后再继续。
+
+### 1. ak / sk → AUTH
+
+询问用户的启动参数，从 `--ak` `--sk` 或 config.py 中获取。
+
+生成 AUTH token（任选一种方式）：
+
+```bash
+# 方式一：Python 一行生成
+python -c "import base64,sys; print('Authorization: Lab ' + base64.b64encode(f'{sys.argv[1]}:{sys.argv[2]}'.encode()).decode())" <ak> <sk>
+
+# 方式二：手动计算
+# base64(ak:sk) → Authorization: Lab <token>
+```
+
+### 2. --addr → BASE URL
+
+| `--addr` 值  | BASE                                |
+| ------------ | ----------------------------------- |
+| `test`       | `https://leap-lab.test.bohrium.com` |
+| `uat`        | `https://leap-lab.uat.bohrium.com`  |
+| `local`      | `http://127.0.0.1:48197`            |
+| 不传（默认） | `https://leap-lab.bohrium.com`      |
+
+确认后设置：
+
+```bash
+BASE="<根据 addr 确定的 URL>"
+AUTH="Authorization: Lab <gen_auth.py 输出的 token>"
+```
+
+**两项全部就绪后才可发起 API 请求。**
+
+## Session State
+
+- `lab_uuid` — 实验室 UUID（首次通过 API #1 自动获取，**不需要问用户**）
+
+## 请求约定
+
+所有请求使用 `curl -s`，POST 需加 `Content-Type: application/json`。
+
+> **Windows 平台**必须使用 `curl.exe`（而非 PowerShell 的 `curl` 别名），示例中的 `curl` 均指 `curl.exe`。
+
+---
+
+## API Endpoints
+
+### 1. 获取实验室信息（自动获取 lab_uuid）
+
+```bash
+curl -s -X GET "$BASE/api/v1/edge/lab/info" -H "$AUTH"
+```
+
+返回：
+
+```json
+{ "code": 0, "data": { "uuid": "xxx", "name": "实验室名称" } }
+```
+
+记住 `data.uuid` 为 `lab_uuid`。
+
+### 2. 录入试剂
+
+```bash
+curl -s -X POST "$BASE/api/v1/lab/reagent" \
+  -H "$AUTH" -H "Content-Type: application/json" \
+  -d '{
+    "lab_uuid": "<lab_uuid>",
+    "cas": "<CAS号>",
+    "name": "<试剂名称>",
+    "molecular_formula": "<分子式>",
+    "smiles": "<SMILES>",
+    "stock_in_quantity": <入库数量>,
+    "unit": "<单位字符串>",
+    "supplier": "<供应商>",
+    "production_date": "<生产日期 ISO 8601>",
+    "expiry_date": "<过期日期 ISO 8601>"
+  }'
+```
+
+返回成功时包含试剂 UUID：
+
+```json
+{"code": 0, "data": {"uuid": "xxx", ...}}
+```
+
+---
+
+## 试剂字段说明
+
+| 字段                | 类型   | 必填 | 说明                          | 示例                     |
+| ------------------- | ------ | ---- | ----------------------------- | ------------------------ |
+| `lab_uuid`          | string | 是   | 实验室 UUID（从 API #1 获取） | `"8511c672-..."`         |
+| `cas`               | string | 是   | CAS 注册号                    | `"7732-18-3"`            |
+| `name`              | string | 是   | 试剂中文/英文名称             | `"水"`                   |
+| `molecular_formula` | string | 是   | 分子式                        | `"H2O"`                  |
+| `smiles`            | string | 是   | SMILES 表示                   | `"O"`                    |
+| `stock_in_quantity` | number | 是   | 入库数量                      | `10`                     |
+| `unit`              | string | 是   | 单位（字符串，见下表）        | `"mL"`                   |
+| `supplier`          | string | 否   | 供应商名称                    | `"国药集团"`             |
+| `production_date`   | string | 否   | 生产日期（ISO 8601）          | `"2025-11-18T00:00:00Z"` |
+| `expiry_date`       | string | 否   | 过期日期（ISO 8601）          | `"2026-11-18T00:00:00Z"` |
+
+### unit 单位值
+
+| 值     | 单位 |
+| ------ | ---- |
+| `"mL"` | 毫升 |
+| `"L"`  | 升   |
+| `"g"`  | 克   |
+| `"kg"` | 千克 |
+| `"瓶"` | 瓶   |
+
+> 根据试剂状态选择：液体用 `"mL"` / `"L"`，固体用 `"g"` / `"kg"`。
+
+---
+
+## 批量录入策略
+
+### 方式一：用户提供 JSON 数组
+
+用户一次性给出多条试剂数据：
+
+```json
+[
+  {
+    "cas": "7732-18-3",
+    "name": "水",
+    "molecular_formula": "H2O",
+    "smiles": "O",
+    "stock_in_quantity": 10,
+    "unit": "mL"
+  },
+  {
+    "cas": "64-17-5",
+    "name": "乙醇",
+    "molecular_formula": "C2H6O",
+    "smiles": "CCO",
+    "stock_in_quantity": 5,
+    "unit": "L"
+  }
+]
+```
+
+Agent 自动为每条补充 `lab_uuid`、`production_date`、`expiry_date` 等字段后逐条提交。
+
+Agent 循环调用 API #2 逐条录入，每条记录一次 API 调用。
+
+### 方式二：用户逐个描述
+
+用户口头描述试剂（如「帮我录入 500mL 的无水乙醇，Sigma 的」），agent 自行补全字段：
+
+1. 根据名称查找 CAS 号、分子式、SMILES（参考下方速查表或自行推断）
+2. 构建完整的请求体
+3. 向用户确认后提交
+
+### 方式三：从 CSV/表格批量导入
+
+用户提供 CSV 或表格文件路径，agent 读取并解析：
+
+```bash
+# 期望的 CSV 格式（首行为表头）
+cas,name,molecular_formula,smiles,stock_in_quantity,unit,supplier,production_date,expiry_date
+7732-18-3,水,H2O,O,10,mL,农夫山泉,2025-11-18T00:00:00Z,2026-11-18T00:00:00Z
+```
+
+### 日期格式规则（重要）
+
+所有日期字段（`production_date`、`expiry_date`）**必须**使用 ISO 8601 完整格式：`YYYY-MM-DDTHH:MM:SSZ`。
+
+- 用户输入 `2025-03-01` → 转换为 `"2025-03-01T00:00:00Z"`
+- 用户输入 `2025/9/1` → 转换为 `"2025-09-01T00:00:00Z"`
+- 用户未提供日期 → 使用当天日期 + `T00:00:00Z`，有效期默认 +1 年
+
+**禁止**发送不带时间部分的日期字符串（如 `"2025-03-01"`），API 会拒绝。
+
+### 执行与汇报
+
+每次 API 调用后：
+
+1. 检查返回 `code`（0 = 成功）
+2. 记录成功/失败数量
+3. 全部完成后汇总：「共录入 N 条试剂，成功 X 条，失败 Y 条」
+4. 如有失败，列出失败的试剂名称和错误信息
+
+---
+
+## 常见试剂速查表
+
+| 名称                  | CAS       | 分子式     | SMILES                               |
+| --------------------- | --------- | ---------- | ------------------------------------ |
+| 水                    | 7732-18-3 | H2O        | O                                    |
+| 乙醇                  | 64-17-5   | C2H6O      | CCO                                  |
+| 乙酸                  | 64-19-7   | C2H4O2     | CC(O)=O                              |
+| 甲醇                  | 67-56-1   | CH4O       | CO                                   |
+| 丙酮                  | 67-64-1   | C3H6O      | CC(C)=O                              |
+| 二甲基亚砜(DMSO)      | 67-68-5   | C2H6OS     | CS(C)=O                              |
+| 乙酸乙酯              | 141-78-6  | C4H8O2     | CCOC(C)=O                            |
+| 二氯甲烷              | 75-09-2   | CH2Cl2     | ClCCl                                |
+| 四氢呋喃(THF)         | 109-99-9  | C4H8O      | C1CCOC1                              |
+| N,N-二甲基甲酰胺(DMF) | 68-12-2   | C3H7NO     | CN(C)C=O                             |
+| 氯仿                  | 67-66-3   | CHCl3      | ClC(Cl)Cl                            |
+| 乙腈                  | 75-05-8   | C2H3N      | CC#N                                 |
+| 甲苯                  | 108-88-3  | C7H8       | Cc1ccccc1                            |
+| 正己烷                | 110-54-3  | C6H14      | CCCCCC                               |
+| 异丙醇                | 67-63-0   | C3H8O      | CC(C)O                               |
+| 盐酸                  | 7647-01-0 | HCl        | Cl                                   |
+| 硫酸                  | 7664-93-9 | H2SO4      | OS(O)(=O)=O                          |
+| 氢氧化钠              | 1310-73-2 | NaOH       | [Na]O                                |
+| 碳酸钠                | 497-19-8  | Na2CO3     | [Na]OC([O-])=O.[Na+]                 |
+| 氯化钠                | 7647-14-5 | NaCl       | [Na]Cl                               |
+| 乙二胺四乙酸(EDTA)    | 60-00-4   | C10H16N2O8 | OC(=O)CN(CCN(CC(O)=O)CC(O)=O)CC(O)=O |
+
+> 此表仅供快速参考。对于不在表中的试剂，agent 应根据化学知识推断或提示用户补充。
+
+---
+
+## 完整工作流 Checklist
+
+```
+Task Progress:
+- [ ] Step 1: 确认 ak/sk → 生成 AUTH token
+- [ ] Step 2: 确认 --addr → 设置 BASE URL
+- [ ] Step 3: GET /edge/lab/info → 获取 lab_uuid
+- [ ] Step 4: 收集试剂信息（用户提供列表/逐个描述/CSV文件）
+- [ ] Step 5: 补全缺失字段（CAS、分子式、SMILES 等）
+- [ ] Step 6: 向用户确认待录入的试剂列表
+- [ ] Step 7: 循环调用 POST /lab/reagent 逐条录入（每条需含 lab_uuid）
+- [ ] Step 8: 汇总结果（成功/失败数量及详情）
+```
+
+---
+
+## 完整示例
+
+用户说：「帮我录入 3 种试剂：500mL 无水乙醇、1kg 氯化钠、2L 去离子水」
+
+Agent 构建的请求序列：
+
+```json
+// 第 1 条
+{"lab_uuid": "8511c672-...", "cas": "64-17-5", "name": "无水乙醇", "molecular_formula": "C2H6O", "smiles": "CCO", "stock_in_quantity": 500, "unit": "mL", "supplier": "国药集团", "production_date": "2025-01-01T00:00:00Z", "expiry_date": "2026-01-01T00:00:00Z"}
+
+// 第 2 条
+{"lab_uuid": "8511c672-...", "cas": "7647-14-5", "name": "氯化钠", "molecular_formula": "NaCl", "smiles": "[Na]Cl", "stock_in_quantity": 1, "unit": "kg", "supplier": "", "production_date": "2025-01-01T00:00:00Z", "expiry_date": "2026-01-01T00:00:00Z"}
+
+// 第 3 条
+{"lab_uuid": "8511c672-...", "cas": "7732-18-3", "name": "去离子水", "molecular_formula": "H2O", "smiles": "O", "stock_in_quantity": 2, "unit": "L", "supplier": "", "production_date": "2025-01-01T00:00:00Z", "expiry_date": "2026-01-01T00:00:00Z"}
+```

.cursor/skills/batch-submit-experiment/SKILL.md

@@ -0,0 +1,360 @@
+---
+name: batch-submit-experiment
+description: Batch submit experiments (notebooks) to the Uni-Lab cloud platform (leap-lab) — list workflows, generate node_params from registry schemas, submit multiple rounds, check notebook status. Use when the user wants to submit experiments, create notebooks, batch run workflows, check experiment status, or mentions 提交实验/批量实验/notebook/实验轮次/实验状态.
+---
+
+# Uni-Lab 批量提交实验指南
+
+通过 Uni-Lab 云端 API 批量提交实验（notebook），支持多轮实验参数配置。根据 workflow 模板详情和本地设备注册表自动生成 `node_params` 模板。
+
+> **重要**：本指南中的 `Authorization: Lab <token>` 是 **Uni-Lab 平台专用的认证方式**，`Lab` 是 Uni-Lab 的 auth scheme 关键字，**不是** HTTP Basic 认证。请勿将其替换为 `Basic`。
+
+## 前置条件（缺一不可）
+
+使用本指南前，**必须**先确认以下信息。如果缺少任何一项，**立即向用户询问并终止**，等补齐后再继续。
+
+### 1. ak / sk → AUTH
+
+询问用户的启动参数，从 `--ak` `--sk` 或 config.py 中获取。
+
+生成 AUTH token（任选一种方式）：
+
+```bash
+# 方式一：Python 一行生成（注意：scheme 是 "Lab" 不是 "Basic"）
+python -c "import base64,sys; print('Authorization: Lab ' + base64.b64encode(f'{sys.argv[1]}:{sys.argv[2]}'.encode()).decode())" <ak> <sk>
+
+# 方式二：手动计算
+# base64(ak:sk) → Authorization: Lab <token>
+# ⚠️ 这里的 "Lab" 是 Uni-Lab 平台的 auth scheme，绝对不能用 "Basic" 替代
+```
+
+### 2. --addr → BASE URL
+
+| `--addr` 值  | BASE                                |
+| ------------ | ----------------------------------- |
+| `test`       | `https://leap-lab.test.bohrium.com` |
+| `uat`        | `https://leap-lab.uat.bohrium.com`  |
+| `local`      | `http://127.0.0.1:48197`            |
+| 不传（默认） | `https://leap-lab.bohrium.com`      |
+
+确认后设置：
+
+```bash
+BASE="<根据 addr 确定的 URL>"
+# ⚠️ Auth scheme 必须是 "Lab"（Uni-Lab 专用），不是 "Basic"
+AUTH="Authorization: Lab <上面命令输出的 token>"
+```
+
+### 3. req_device_registry_upload.json（设备注册表）
+
+**批量提交实验时需要本地注册表来解析 workflow 节点的参数 schema。**
+
+**必须先用 Glob 工具搜索文件**，不要直接猜测路径：
+
+```
+Glob: **/req_device_registry_upload.json
+```
+
+常见位置（仅供参考，以 Glob 实际结果为准）：
+- `<workspace>/unilabos_data/req_device_registry_upload.json`
+- `<workspace>/req_device_registry_upload.json`
+
+找到后**检查文件修改时间**并告知用户。超过 1 天提醒用户是否需要重新启动 `unilab`。
+
+**如果 Glob 搜索无结果** → 告知用户先运行 `unilab` 启动命令，等注册表生成后再执行。可跳过此步，但将无法自动生成参数模板，需要用户手动填写 `param`。
+
+### 4. workflow_uuid（目标工作流）
+
+用户需要提供要提交的 workflow UUID。如果用户不确定，通过 API #3 列出可用 workflow 供选择。
+
+**四项全部就绪后才可开始。**
+
+## Session State
+
+在整个对话过程中，agent 需要记住以下状态，避免重复询问用户：
+
+- `lab_uuid` — 实验室 UUID（首次通过 API #1 自动获取，**不需要问用户**）
+- `project_uuid` — 项目 UUID（通过 API #2 列出项目列表，**让用户选择**）
+- `workflow_uuid` — 工作流 UUID（用户提供或从列表选择）
+- `workflow_nodes` — workflow 中各 action 节点的 uuid、设备 ID、动作名（从 API #4 获取）
+
+## 请求约定
+
+所有请求使用 `curl -s`，POST 需加 `Content-Type: application/json`。
+
+> **Windows 平台**必须使用 `curl.exe`（而非 PowerShell 的 `curl` 别名），示例中的 `curl` 均指 `curl.exe`。
+>
+> **PowerShell JSON 传参**：PowerShell 中 `-d '{"key":"value"}'` 会因引号转义失败。请将 JSON 写入临时文件，用 `-d '@tmp_body.json'`（单引号包裹 `@`，否则会被解析为 splatting 运算符）。
+
+---
+
+## API Endpoints
+
+### 1. 获取实验室信息（自动获取 lab_uuid）
+
+```bash
+curl -s -X GET "$BASE/api/v1/edge/lab/info" -H "$AUTH"
+```
+
+返回：
+
+```json
+{ "code": 0, "data": { "uuid": "xxx", "name": "实验室名称" } }
+```
+
+记住 `data.uuid` 为 `lab_uuid`。
+
+### 2. 列出实验室项目（让用户选择项目）
+
+```bash
+curl -s -X GET "$BASE/api/v1/lab/project/list?lab_uuid=$lab_uuid" -H "$AUTH"
+```
+
+返回：
+
+```json
+{
+  "code": 0,
+  "data": {
+    "items": [
+      {
+        "uuid": "1b3f249a-...",
+        "name": "bt",
+        "description": null,
+        "status": "active",
+        "created_at": "2026-04-09T14:31:28+08:00"
+      },
+      {
+        "uuid": "b6366243-...",
+        "name": "default",
+        "description": "默认项目",
+        "status": "active",
+        "created_at": "2026-03-26T11:13:36+08:00"
+      }
+    ]
+  }
+}
+```
+
+展示 `data.items[]` 中每个项目的 `name` 和 `uuid`，让用户选择。用户**必须**选择一个项目，记住 `project_uuid`（即选中项目的 `uuid`），后续创建 notebook 时需要提供。
+
+### 3. 列出可用 workflow
+
+```bash
+curl -s -X GET "$BASE/api/v1/lab/workflow/workflows?page=1&page_size=20&lab_uuid=$lab_uuid" -H "$AUTH"
+```
+
+返回 workflow 列表，展示给用户选择。列出每个 workflow 的 `uuid` 和 `name`。
+
+### 4. 获取 workflow 模板详情
+
+```bash
+curl -s -X GET "$BASE/api/v1/lab/workflow/template/detail/$workflow_uuid" -H "$AUTH"
+```
+
+返回 workflow 的完整结构，包含所有 action 节点信息。需要从响应中提取：
+
+- 每个 action 节点的 `node_uuid`
+- 每个节点对应的设备 ID（`resource_template_name`）
+- 每个节点的动作名（`node_template_name`）
+- 每个节点的现有参数（`param`）
+
+> **注意**：此 API 返回格式可能因版本不同而有差异。首次调用时，先打印完整响应分析结构，再提取节点信息。常见的节点字段路径为 `data.nodes[]` 或 `data.workflow_nodes[]`。
+
+### 5. 提交实验（创建 notebook）
+
+```bash
+curl -s -X POST "$BASE/api/v1/lab/notebook" \
+  -H "$AUTH" -H "Content-Type: application/json" \
+  -d '<request_body>'
+```
+
+请求体结构：
+
+```json
+{
+  "lab_uuid": "<lab_uuid>",
+  "project_uuid": "<project_uuid>",
+  "workflow_uuid": "<workflow_uuid>",
+  "name": "<实验名称>",
+  "node_params": [
+    {
+      "sample_uuids": ["<样品UUID1>", "<样品UUID2>"],
+      "datas": [
+        {
+          "node_uuid": "<workflow中的节点UUID>",
+          "param": {},
+          "sample_params": [
+            {
+              "container_uuid": "<容器UUID>",
+              "sample_value": {
+                "liquid_names": "<液体名称>",
+                "volumes": 1000
+              }
+            }
+          ]
+        }
+      ]
+    }
+  ]
+}
+```
+
+> **注意**：`sample_uuids` 必须是 **UUID 数组**（`[]uuid.UUID`），不是字符串。无样品时传空数组 `[]`。
+
+### 6. 查询 notebook 状态
+
+提交成功后，使用返回的 notebook UUID 查询执行状态：
+
+```bash
+curl -s -X GET "$BASE/api/v1/lab/notebook/status?uuid=$notebook_uuid" -H "$AUTH"
+```
+
+提交后应**立即查询一次**状态，确认 notebook 已被正确接收并开始调度。
+
+---
+
+## Notebook 请求体详解
+
+### node_params 结构
+
+`node_params` 是一个数组，**每个元素代表一轮实验**：
+
+- 要跑 2 轮 → `node_params` 有 2 个元素
+- 要跑 N 轮 → `node_params` 有 N 个元素
+
+### 每轮的字段
+
+| 字段           | 类型          | 说明                                      |
+| -------------- | ------------- | ----------------------------------------- |
+| `sample_uuids` | array\<uuid\> | 该轮实验的样品 UUID 数组，无样品时传 `[]` |
+| `datas`        | array         | 该轮中每个 workflow 节点的参数配置        |
+
+### datas 中每个节点
+
+| 字段            | 类型   | 说明                                         |
+| --------------- | ------ | -------------------------------------------- |
+| `node_uuid`     | string | workflow 模板中的节点 UUID（从 API #4 获取） |
+| `param`         | object | 动作参数（根据本地注册表 schema 填写）       |
+| `sample_params` | array  | 样品相关参数（液体名、体积等）               |
+
+### sample_params 中每条
+
+| 字段             | 类型   | 说明                                                 |
+| ---------------- | ------ | ---------------------------------------------------- |
+| `container_uuid` | string | 容器 UUID                                            |
+| `sample_value`   | object | 样品值，如 `{"liquid_names": "水", "volumes": 1000}` |
+
+---
+
+## 从本地注册表生成 param 模板
+
+### 自动方式 — 运行脚本
+
+```bash
+python scripts/gen_notebook_params.py \
+  --auth <token> \
+  --base <BASE_URL> \
+  --workflow-uuid <workflow_uuid> \
+  [--registry <path/to/req_device_registry_upload.json>] \
+  [--rounds <轮次数>] \
+  [--output <输出文件路径>]
+```
+
+> 脚本位于本文档同级目录下的 `scripts/gen_notebook_params.py`。
+
+脚本会：
+
+1. 调用 workflow detail API 获取所有 action 节点
+2. 读取本地注册表，为每个节点查找对应的 action schema
+3. 生成 `notebook_template.json`，包含：
+   - 完整 `node_params` 骨架
+   - 每个节点的 param 字段及类型说明
+   - `_schema_info` 辅助信息（不提交，仅供参考）
+
+### 手动方式
+
+如果脚本不可用或注册表不存在：
+
+1. 调用 API #4 获取 workflow 详情
+2. 找到每个 action 节点的 `node_uuid`
+3. 在本地注册表中查找对应设备的 `action_value_mappings`：
+   ```
+   resources[].id == <device_id>
+   → resources[].class.action_value_mappings.<action_name>.schema.properties.goal.properties
+   ```
+4. 将 schema 中的 properties 作为 `param` 的字段模板
+5. 按轮次复制 `node_params` 元素，让用户填写每轮的具体值
+
+### 注册表结构参考
+
+```json
+{
+  "resources": [
+    {
+      "id": "liquid_handler.prcxi",
+      "class": {
+        "module": "unilabos.devices.xxx:ClassName",
+        "action_value_mappings": {
+          "transfer_liquid": {
+            "type": "LiquidHandlerTransfer",
+            "schema": {
+              "properties": {
+                "goal": {
+                  "properties": {
+                    "asp_vols": {
+                      "type": "array",
+                      "items": { "type": "number" }
+                    },
+                    "sources": { "type": "array" }
+                  },
+                  "required": ["asp_vols", "sources"]
+                }
+              }
+            },
+            "goal_default": {}
+          }
+        }
+      }
+    }
+  ]
+}
+```
+
+`param` 填写时，使用 `goal.properties` 中的字段名和类型。
+
+---
+
+## 完整工作流 Checklist
+
+```
+Task Progress:
+- [ ] Step 1: 确认 ak/sk → 生成 AUTH token
+- [ ] Step 2: 确认 --addr → 设置 BASE URL
+- [ ] Step 3: GET /edge/lab/info → 获取 lab_uuid
+- [ ] Step 4: GET /lab/project/list → 列出项目，让用户选择 → 获取 project_uuid
+- [ ] Step 5: 确认 workflow_uuid（用户提供或从 GET #3 列表选择）
+- [ ] Step 6: GET workflow detail (#4) → 提取各节点 uuid、设备ID、动作名
+- [ ] Step 7: 定位本地注册表 req_device_registry_upload.json
+- [ ] Step 8: 运行 gen_notebook_params.py 或手动匹配 → 生成 node_params 模板
+- [ ] Step 9: 引导用户填写每轮的参数（sample_uuids、param、sample_params）
+- [ ] Step 10: 构建完整请求体（含 project_uuid）→ POST /lab/notebook 提交
+- [ ] Step 11: 检查返回结果，记录 notebook UUID
+- [ ] Step 12: GET /lab/notebook/status → 查询 notebook 状态，确认已调度
+```
+
+---
+
+## 常见问题
+
+### Q: workflow 中有多个节点，每轮都要填所有节点的参数吗？
+
+是的。`datas` 数组中需要包含该轮实验涉及的每个 workflow 节点的参数。通常每个 action 节点都需要一条 `datas` 记录。
+
+### Q: 多轮实验的参数完全不同吗？
+
+通常每轮的 `param`（设备动作参数）可能相同或相似，但 `sample_uuids` 和 `sample_params`（样品信息）每轮不同。脚本生成模板时会按轮次复制骨架，用户只需修改差异部分。
+
+### Q: 如何获取 sample_uuids 和 container_uuid？
+
+这些 UUID 通常来自实验室的样品管理系统。向用户询问，或从资源树（API `GET /lab/material/download/$lab_uuid`）中查找。

.cursor/skills/batch-submit-experiment/scripts/gen_notebook_params.py

@@ -0,0 +1,395 @@
+#!/usr/bin/env python3
+"""
+从 workflow 模板详情 + 本地设备注册表生成 notebook 提交用的 node_params 模板。
+
+用法:
+  python gen_notebook_params.py --auth <token> --base <url> --workflow-uuid <uuid> [选项]
+
+选项:
+  --auth <token>          Lab token（base64(ak:sk) 的结果，不含 "Lab " 前缀）
+  --base <url>            API 基础 URL（如 https://leap-lab.test.bohrium.com）
+  --workflow-uuid <uuid>  目标 workflow 的 UUID
+  --registry <path>       本地注册表文件路径（默认自动搜索）
+  --rounds <n>            实验轮次数（默认 1）
+  --output <path>         输出模板文件路径（默认 notebook_template.json）
+  --dump-response         打印 workflow detail API 的原始响应（调试用）
+
+示例:
+  python gen_notebook_params.py \\
+    --auth YTFmZDlkNGUtxxxx \\
+    --base https://leap-lab.test.bohrium.com \\
+    --workflow-uuid abc-123-def \\
+    --rounds 2
+"""
+import copy
+import json
+import os
+import sys
+from datetime import datetime
+from urllib.request import Request, urlopen
+from urllib.error import HTTPError, URLError
+
+REGISTRY_FILENAME = "req_device_registry_upload.json"
+
+
+def find_registry(explicit_path=None):
+    """查找本地注册表文件，逻辑同 extract_device_actions.py"""
+    if explicit_path:
+        if os.path.isfile(explicit_path):
+            return explicit_path
+        if os.path.isdir(explicit_path):
+            fp = os.path.join(explicit_path, REGISTRY_FILENAME)
+            if os.path.isfile(fp):
+                return fp
+        print(f"警告: 指定的注册表路径不存在: {explicit_path}")
+        return None
+
+    candidates = [
+        os.path.join("unilabos_data", REGISTRY_FILENAME),
+        REGISTRY_FILENAME,
+    ]
+    for c in candidates:
+        if os.path.isfile(c):
+            return c
+
+    script_dir = os.path.dirname(os.path.abspath(__file__))
+    workspace_root = os.path.normpath(os.path.join(script_dir, "..", "..", ".."))
+    for c in candidates:
+        path = os.path.join(workspace_root, c)
+        if os.path.isfile(path):
+            return path
+
+    cwd = os.getcwd()
+    for _ in range(5):
+        parent = os.path.dirname(cwd)
+        if parent == cwd:
+            break
+        cwd = parent
+        for c in candidates:
+            path = os.path.join(cwd, c)
+            if os.path.isfile(path):
+                return path
+    return None
+
+
+def load_registry(path):
+    with open(path, "r", encoding="utf-8") as f:
+        return json.load(f)
+
+
+def build_registry_index(registry_data):
+    """构建 device_id → action_value_mappings 的索引"""
+    index = {}
+    for res in registry_data.get("resources", []):
+        rid = res.get("id", "")
+        avm = res.get("class", {}).get("action_value_mappings", {})
+        if rid and avm:
+            index[rid] = avm
+    return index
+
+
+def flatten_goal_schema(action_data):
+    """从 action_value_mappings 条目中提取 goal 层的 schema"""
+    schema = action_data.get("schema", {})
+    goal_schema = schema.get("properties", {}).get("goal", {})
+    return goal_schema if goal_schema else schema
+
+
+def build_param_template(goal_schema):
+    """根据 goal schema 生成 param 模板，含类型标注"""
+    properties = goal_schema.get("properties", {})
+    required = set(goal_schema.get("required", []))
+    template = {}
+    for field_name, field_def in properties.items():
+        if field_name == "unilabos_device_id":
+            continue
+        ftype = field_def.get("type", "any")
+        default = field_def.get("default")
+        if default is not None:
+            template[field_name] = default
+        elif ftype == "string":
+            template[field_name] = f"$TODO ({ftype}, {'required' if field_name in required else 'optional'})"
+        elif ftype == "number" or ftype == "integer":
+            template[field_name] = 0
+        elif ftype == "boolean":
+            template[field_name] = False
+        elif ftype == "array":
+            template[field_name] = []
+        elif ftype == "object":
+            template[field_name] = {}
+        else:
+            template[field_name] = f"$TODO ({ftype})"
+    return template
+
+
+def fetch_workflow_detail(base_url, auth_token, workflow_uuid):
+    """调用 workflow detail API"""
+    url = f"{base_url}/api/v1/lab/workflow/template/detail/{workflow_uuid}"
+    req = Request(url, method="GET")
+    req.add_header("Authorization", f"Lab {auth_token}")
+    try:
+        with urlopen(req, timeout=30) as resp:
+            return json.loads(resp.read().decode("utf-8"))
+    except HTTPError as e:
+        body = e.read().decode("utf-8", errors="replace")
+        print(f"API 错误 {e.code}: {body}")
+        return None
+    except URLError as e:
+        print(f"网络错误: {e.reason}")
+        return None
+
+
+def extract_nodes_from_response(response):
+    """
+    从 workflow detail 响应中提取 action 节点列表。
+    适配多种可能的响应格式。
+
+    返回: [(node_uuid, resource_template_name, node_template_name, existing_param), ...]
+    """
+    data = response.get("data", response)
+
+    search_keys = ["nodes", "workflow_nodes", "node_list", "steps"]
+    nodes_raw = None
+    for key in search_keys:
+        if key in data and isinstance(data[key], list):
+            nodes_raw = data[key]
+            break
+
+    if nodes_raw is None:
+        if isinstance(data, list):
+            nodes_raw = data
+        else:
+            for v in data.values():
+                if isinstance(v, list) and len(v) > 0 and isinstance(v[0], dict):
+                    nodes_raw = v
+                    break
+
+    if not nodes_raw:
+        print("警告: 未能从响应中提取节点列表")
+        print("响应顶层 keys:", list(data.keys()) if isinstance(data, dict) else type(data).__name__)
+        return []
+
+    result = []
+    for node in nodes_raw:
+        if not isinstance(node, dict):
+            continue
+
+        node_uuid = (
+            node.get("uuid")
+            or node.get("node_uuid")
+            or node.get("id")
+            or ""
+        )
+        resource_name = (
+            node.get("resource_template_name")
+            or node.get("device_id")
+            or node.get("resource_name")
+            or node.get("device_name")
+            or ""
+        )
+        template_name = (
+            node.get("node_template_name")
+            or node.get("action_name")
+            or node.get("template_name")
+            or node.get("action")
+            or node.get("name")
+            or ""
+        )
+        existing_param = node.get("param", {}) or {}
+
+        if node_uuid:
+            result.append((node_uuid, resource_name, template_name, existing_param))
+
+    return result
+
+
+def generate_template(nodes, registry_index, rounds):
+    """生成 notebook 提交模板"""
+    node_params = []
+    schema_info = {}
+
+    datas_template = []
+    for node_uuid, resource_name, template_name, existing_param in nodes:
+        param_template = {}
+        matched = False
+
+        if resource_name and template_name and resource_name in registry_index:
+            avm = registry_index[resource_name]
+            if template_name in avm:
+                goal_schema = flatten_goal_schema(avm[template_name])
+                param_template = build_param_template(goal_schema)
+                goal_default = avm[template_name].get("goal_default", {})
+                if goal_default:
+                    for k, v in goal_default.items():
+                        if k in param_template and v is not None:
+                            param_template[k] = v
+                matched = True
+
+                schema_info[node_uuid] = {
+                    "device_id": resource_name,
+                    "action_name": template_name,
+                    "action_type": avm[template_name].get("type", ""),
+                    "schema_properties": list(goal_schema.get("properties", {}).keys()),
+                    "required": goal_schema.get("required", []),
+                }
+
+        if not matched and existing_param:
+            param_template = existing_param
+
+        if not matched and not existing_param:
+            schema_info[node_uuid] = {
+                "device_id": resource_name,
+                "action_name": template_name,
+                "warning": "未在本地注册表中找到匹配的 action schema",
+            }
+
+        datas_template.append({
+            "node_uuid": node_uuid,
+            "param": param_template,
+            "sample_params": [
+                {
+                    "container_uuid": "$TODO_CONTAINER_UUID",
+                    "sample_value": {
+                        "liquid_names": "$TODO_LIQUID_NAME",
+                        "volumes": 0,
+                    },
+                }
+            ],
+        })
+
+    for i in range(rounds):
+        node_params.append({
+            "sample_uuids": f"$TODO_SAMPLE_UUID_ROUND_{i + 1}",
+            "datas": copy.deepcopy(datas_template),
+        })
+
+    return {
+        "lab_uuid": "$TODO_LAB_UUID",
+        "project_uuid": "$TODO_PROJECT_UUID",
+        "workflow_uuid": "$TODO_WORKFLOW_UUID",
+        "name": "$TODO_EXPERIMENT_NAME",
+        "node_params": node_params,
+        "_schema_info（仅参考，提交时删除）": schema_info,
+    }
+
+
+def parse_args(argv):
+    """简单的参数解析"""
+    opts = {
+        "auth": None,
+        "base": None,
+        "workflow_uuid": None,
+        "registry": None,
+        "rounds": 1,
+        "output": "notebook_template.json",
+        "dump_response": False,
+    }
+    i = 0
+    while i < len(argv):
+        arg = argv[i]
+        if arg == "--auth" and i + 1 < len(argv):
+            opts["auth"] = argv[i + 1]
+            i += 2
+        elif arg == "--base" and i + 1 < len(argv):
+            opts["base"] = argv[i + 1].rstrip("/")
+            i += 2
+        elif arg == "--workflow-uuid" and i + 1 < len(argv):
+            opts["workflow_uuid"] = argv[i + 1]
+            i += 2
+        elif arg == "--registry" and i + 1 < len(argv):
+            opts["registry"] = argv[i + 1]
+            i += 2
+        elif arg == "--rounds" and i + 1 < len(argv):
+            opts["rounds"] = int(argv[i + 1])
+            i += 2
+        elif arg == "--output" and i + 1 < len(argv):
+            opts["output"] = argv[i + 1]
+            i += 2
+        elif arg == "--dump-response":
+            opts["dump_response"] = True
+            i += 1
+        else:
+            print(f"未知参数: {arg}")
+            i += 1
+    return opts
+
+
+def main():
+    opts = parse_args(sys.argv[1:])
+
+    if not opts["auth"] or not opts["base"] or not opts["workflow_uuid"]:
+        print("用法:")
+        print("  python gen_notebook_params.py --auth <token> --base <url> --workflow-uuid <uuid> [选项]")
+        print()
+        print("必需参数:")
+        print("  --auth <token>          Lab token（base64(ak:sk)）")
+        print("  --base <url>            API 基础 URL")
+        print("  --workflow-uuid <uuid>  目标 workflow UUID")
+        print()
+        print("可选参数:")
+        print("  --registry <path>       注册表文件路径（默认自动搜索）")
+        print("  --rounds <n>            实验轮次数（默认 1）")
+        print("  --output <path>         输出文件路径（默认 notebook_template.json）")
+        print("  --dump-response         打印 API 原始响应")
+        sys.exit(1)
+
+    # 1. 查找并加载本地注册表
+    registry_path = find_registry(opts["registry"])
+    registry_index = {}
+    if registry_path:
+        mtime = os.path.getmtime(registry_path)
+        gen_time = datetime.fromtimestamp(mtime).strftime("%Y-%m-%d %H:%M:%S")
+        print(f"注册表: {registry_path}  (生成时间: {gen_time})")
+        registry_data = load_registry(registry_path)
+        registry_index = build_registry_index(registry_data)
+        print(f"已索引 {len(registry_index)} 个设备的 action schemas")
+    else:
+        print("警告: 未找到本地注册表，将跳过 param 模板生成")
+        print("  提交时需要手动填写各节点的 param 字段")
+
+    # 2. 获取 workflow 详情
+    print(f"\n正在获取 workflow 详情: {opts['workflow_uuid']}")
+    response = fetch_workflow_detail(opts["base"], opts["auth"], opts["workflow_uuid"])
+    if not response:
+        print("错误: 无法获取 workflow 详情")
+        sys.exit(1)
+
+    if opts["dump_response"]:
+        print("\n=== API 原始响应 ===")
+        print(json.dumps(response, indent=2, ensure_ascii=False)[:5000])
+        print("=== 响应结束（截断至 5000 字符） ===\n")
+
+    # 3. 提取节点
+    nodes = extract_nodes_from_response(response)
+    if not nodes:
+        print("错误: 未能从 workflow 中提取任何 action 节点")
+        print("请使用 --dump-response 查看原始响应结构")
+        sys.exit(1)
+
+    print(f"\n找到 {len(nodes)} 个 action 节点:")
+    print(f"  {'节点 UUID':<40} {'设备 ID':<30} {'动作名':<25} {'Schema'}")
+    print("  " + "-" * 110)
+    for node_uuid, resource_name, template_name, _ in nodes:
+        matched = "✓" if (resource_name in registry_index and
+                          template_name in registry_index.get(resource_name, {})) else "✗"
+        print(f"  {node_uuid:<40} {resource_name:<30} {template_name:<25} {matched}")
+
+    # 4. 生成模板
+    template = generate_template(nodes, registry_index, opts["rounds"])
+    template["workflow_uuid"] = opts["workflow_uuid"]
+
+    output_path = opts["output"]
+    with open(output_path, "w", encoding="utf-8") as f:
+        json.dump(template, f, indent=2, ensure_ascii=False)
+    print(f"\n模板已写入: {output_path}")
+    print(f"  轮次数: {opts['rounds']}")
+    print(f"  节点数/轮: {len(nodes)}")
+    print()
+    print("下一步:")
+    print("  1. 打开模板文件，将 $TODO 占位符替换为实际值")
+    print("  2. 删除 _schema_info 字段（仅供参考）")
+    print("  3. 使用 POST /api/v1/lab/notebook 提交")
+
+
+if __name__ == "__main__":
+    main()

.cursor/skills/create-device-skill/SKILL.md

@@ -0,0 +1,500 @@
+---
+name: create-device-skill
+description: Create a skill for any Uni-Lab device by extracting action schemas from the device registry. Use when the user wants to create a new device skill, add device API documentation, or set up action schemas for a device.
+---
+
+# 创建设备 Skill 指南
+
+本 meta-skill 教你如何为任意 Uni-Lab-OS 设备创建完整的 API 操作技能（参考 `unilab-device-api` 的成功案例）。
+
+## 数据源
+
+- **设备注册表**: `unilabos_data/req_device_registry_upload.json`
+- **结构**: `{ "resources": [{ "id": "<device_id>", "class": { "module": "<python_module:ClassName>", "action_value_mappings": { ... } } }] }`
+- **生成时机**: `unilab` 启动并完成注册表上传后自动生成
+- **module 字段**: 格式 `unilabos.devices.xxx.yyy:ClassName`，可转为源码路径 `unilabos/devices/xxx/yyy.py`，阅读源码可了解参数含义和设备行为
+
+## 创建流程
+
+### Step 0 — 收集必备信息（缺一不可，否则询问后终止）
+
+开始前**必须**确认以下 4 项信息全部就绪。如果用户未提供任何一项，**立即询问并终止当前流程**，等用户补齐后再继续。
+
+向用户提问：「请提供你的 unilab 启动参数，我需要以下信息：」
+
+#### 必备项 ①：ak / sk（认证凭据）
+
+来源：启动命令的 `--ak` `--sk` 参数，或 config.py 中的 `ak = "..."` `sk = "..."`。
+
+获取后立即生成 AUTH token：
+
+```bash
+python ./scripts/gen_auth.py <ak> <sk>
+# 或从 config.py 提取
+python ./scripts/gen_auth.py --config <config.py>
+```
+
+认证算法：`base64(ak:sk)` → `Authorization: Lab <token>`
+
+#### 必备项 ②：--addr（目标环境）
+
+决定 API 请求发往哪个服务器。从启动命令的 `--addr` 参数获取：
+
+| `--addr` 值    | BASE URL                            |
+| -------------- | ----------------------------------- |
+| `test`         | `https://leap-lab.test.bohrium.com` |
+| `uat`          | `https://leap-lab.uat.bohrium.com`  |
+| `local`        | `http://127.0.0.1:48197`            |
+| 不传（默认）   | `https://leap-lab.bohrium.com`      |
+| 其他自定义 URL | 直接使用该 URL                      |
+
+#### 必备项 ③：req_device_registry_upload.json（设备注册表）
+
+数据文件由 `unilab` 启动时自动生成，需要定位它：
+
+**推断 working_dir**（即 `unilabos_data` 所在目录）：
+
+| 条件                 | working_dir 取值                                         |
+| -------------------- | -------------------------------------------------------- |
+| 传了 `--working_dir` | `<working_dir>/unilabos_data/`（若子目录已存在则直接用） |
+| 仅传了 `--config`    | `<config 文件所在目录>/unilabos_data/`                   |
+| 都没传               | `<当前工作目录>/unilabos_data/`                          |
+
+**按优先级搜索文件**：
+
+```
+<推断的 working_dir>/unilabos_data/req_device_registry_upload.json
+<推断的 working_dir>/req_device_registry_upload.json
+<workspace 根目录>/unilabos_data/req_device_registry_upload.json
+```
+
+也可以直接 Glob 搜索：`**/req_device_registry_upload.json`
+
+找到后**必须检查文件修改时间**并告知用户：「找到注册表文件 `<路径>`，生成于 `<时间>`。请确认这是最近一次启动生成的。」超过 1 天提醒用户是否需要重新启动 `unilab`。
+
+**如果文件不存在** → 告知用户先运行 `unilab` 启动命令，等日志出现 `注册表响应数据已保存` 后再执行本流程。**终止。**
+
+#### 必备项 ④：目标设备
+
+用户需要明确要为哪个设备创建 skill。可以是设备名称（如「PRCXI 移液站」）或 device_id（如 `liquid_handler.prcxi`）。
+
+如果用户不确定，运行提取脚本列出所有设备供选择：
+
+```bash
+python ./scripts/extract_device_actions.py --registry <找到的文件路径>
+```
+
+**四项全部就绪后才进入 Step 1。**
+
+### Step 1 — 列出可用设备
+
+运行提取脚本，列出所有设备及 action 数量和 Python 源码路径，让用户选择：
+
+```bash
+# 自动搜索（默认在 unilabos_data/ 和当前目录查找）
+python ./scripts/extract_device_actions.py
+
+# 指定注册表文件路径
+python ./scripts/extract_device_actions.py --registry <path/to/req_device_registry_upload.json>
+```
+
+脚本输出包含每个设备的 **Python 源码路径**（从 `class.module` 转换），可用于后续阅读源码理解参数含义。
+
+### Step 2 — 提取 Action Schema
+
+用户选择设备后，运行提取脚本：
+
+```bash
+python ./scripts/extract_device_actions.py [--registry <path>] <device_id> ./skills/<skill-name>/actions/
+```
+
+脚本会显示设备的 Python 源码路径和类名，方便阅读源码了解参数含义。
+
+每个 action 生成一个 JSON 文件，包含：
+
+- `type` — 作为 API 调用的 `action_type`
+- `schema` — 完整 JSON Schema（含 `properties.goal.properties` 参数定义）
+- `goal` — goal 字段映射（含占位符 `$placeholder`）
+- `goal_default` — 默认值
+
+### Step 3 — 写 action-index.md
+
+按模板为每个 action 写条目（**必须包含 `action_type`**）：
+
+```markdown
+### `<action_name>`
+
+<用途描述（一句话）>
+
+- **action_type**: `<从 actions/<name>.json 的 type 字段获取>`
+- **Schema**: [`actions/<filename>.json`](actions/<filename>.json)
+- **核心参数**: `param1`, `param2`（从 schema.required 获取）
+- **可选参数**: `param3`, `param4`
+- **占位符字段**: `field`（需填入物料信息，值以 `$` 开头）
+```
+
+描述规则：
+
+- **每个 action 必须标注 `action_type`**（从 JSON 的 `type` 字段读取），这是 API #9 调用时的必填参数，传错会导致任务永远卡住
+- 从 `schema.properties` 读参数列表（schema 已提升为 goal 内容）
+- 从 `schema.required` 区分核心/可选参数
+- 按功能分类（移液、枪头、外设等）
+- 标注 `placeholder_keys` 中的字段类型：
+  - `unilabos_resources` → **ResourceSlot**，填入 `{id, name, uuid}`（id 是路径格式，从资源树取物料节点）
+  - `unilabos_devices` → **DeviceSlot**，填入路径字符串如 `"/host_node"`（从资源树筛选 type=device）
+  - `unilabos_nodes` → **NodeSlot**，填入路径字符串如 `"/PRCXI/PRCXI_Deck"`（资源树中任意节点）
+  - `unilabos_class` → **ClassSlot**，填入类名字符串如 `"container"`（从注册表查找）
+  - `unilabos_formulation` → **FormulationSlot**，填入配方数组 `[{well_name, liquids: [{name, volume}]}]`（well_name 为目标物料的 name）
+- array 类型字段 → `[{id, name, uuid}, ...]`
+- 特殊：`create_resource` 的 `res_id`（ResourceSlot）可填不存在的路径
+
+### Step 4 — 写 SKILL.md
+
+直接复用 `unilab-device-api` 的 API 模板，修改：
+
+- 设备名称
+- Action 数量
+- 目录列表
+- Session state 中的 `device_name`
+- **AUTH 头** — 使用 Step 0 中 `gen_auth.py` 生成的 `Authorization: Lab <token>`（不要硬编码 `Api` 类型的 key）
+- **Python 源码路径** — 在 SKILL.md 开头注明设备对应的源码文件，方便参考参数含义
+- **Slot 字段表** — 列出本设备哪些 action 的哪些字段需要填入 Slot（物料/设备/节点/类名）
+- **action_type 速查表** — 在 API #9 说明后面紧跟一个表格，列出每个 action 对应的 `action_type` 值（从 JSON `type` 字段提取），方便 agent 快速查找而无需打开 JSON 文件
+
+API 模板结构：
+
+```markdown
+## 设备信息
+
+- device_id, Python 源码路径, 设备类名
+
+## 前置条件（缺一不可）
+
+- ak/sk → AUTH, --addr → BASE URL
+
+## 请求约定
+
+- Windows 平台必须用 curl.exe（非 PowerShell 的 curl 别名）
+
+## Session State
+
+- lab_uuid（通过 GET /edge/lab/info 直接获取，不要问用户）, device_name
+
+## API Endpoints
+
+# - #1 GET /edge/lab/info → 直接拿到 lab_uuid
+
+# - #2 创建工作流 POST /lab/workflow/owner → 拼 URL 告知用户
+
+# - #3 创建节点 POST /edge/workflow/node
+
+# body: {workflow_uuid, resource_template_name: "<device_id>", node_template_name: "<action_name>"}
+
+# - #4 删除节点 DELETE /lab/workflow/nodes
+
+# - #5 更新节点参数 PATCH /lab/workflow/node
+
+# - #6 查询节点 handles POST /lab/workflow/node-handles
+
+# body: {node_uuids: ["uuid1","uuid2"]} → 返回各节点的 handle_uuid
+
+# - #7 批量创建边 POST /lab/workflow/edges
+
+# body: {edges: [{source_node_uuid, target_node_uuid, source_handle_uuid, target_handle_uuid}]}
+
+# - #8 启动工作流 POST /lab/workflow/{uuid}/run
+
+# - #9 运行设备单动作 POST /lab/mcp/run/action（⚠️ action_type 必须从 action-index.md 或 actions/<name>.json 的 type 字段获取，传错会导致任务永远卡住）
+
+# - #10 查询任务状态 GET /lab/mcp/task/{task_uuid}
+
+# - #11 运行工作流单节点 POST /lab/mcp/run/workflow/action
+
+# - #12 获取资源树 GET /lab/material/download/{lab_uuid}
+
+# - #13 获取工作流模板详情 GET /lab/workflow/template/detail/{workflow_uuid}
+
+# 返回 workflow 完整结构：data.nodes[] 含每个节点的 uuid、name、param、device_name、handles
+
+# - #14 按名称查询物料模板 GET /lab/material/template/by-name?lab_uuid=&name=
+
+# 返回 res_template_uuid，用于 #15 创建物料时的必填字段
+
+# - #15 创建物料节点 POST /edge/material/node
+
+# body: {res_template_uuid(从#14获取), name(自定义), display_name, parent_uuid?(从#12获取), ...}
+
+# - #16 更新物料节点 PUT /edge/material/node
+
+# body: {uuid(从#12获取), display_name?, description?, init_param_data?, data?, ...}
+
+## Placeholder Slot 填写规则
+
+- unilabos_resources → ResourceSlot → {"id":"/path/name","name":"name","uuid":"xxx"}
+- unilabos_devices → DeviceSlot → "/parent/device" 路径字符串
+- unilabos_nodes → NodeSlot → "/parent/node" 路径字符串
+- unilabos_class → ClassSlot → "class_name" 字符串
+- unilabos_formulation → FormulationSlot → [{well_name, liquids: [{name, volume}]}] 配方数组
+- 特例：create_resource 的 res_id 允许填不存在的路径
+- 列出本设备所有 Slot 字段、类型及含义
+
+## 渐进加载策略
+
+## 完整工作流 Checklist
+```
+
+### Step 5 — 验证
+
+检查文件完整性：
+
+- [ ] `SKILL.md` 包含 API endpoint（#1 获取 lab_uuid、#2-#7 工作流/节点/边、#8-#11 运行/查询、#12 资源树、#13 工作流模板详情、#14-#16 物料管理）
+- [ ] `SKILL.md` 包含 Placeholder Slot 填写规则（ResourceSlot / DeviceSlot / NodeSlot / ClassSlot / FormulationSlot + create_resource 特例）和本设备的 Slot 字段表
+- [ ] `action-index.md` 列出所有 action 并有描述
+- [ ] `actions/` 目录中每个 action 有对应 JSON 文件
+- [ ] JSON 文件包含 `type`, `schema`（已提升为 goal 内容）, `goal`, `goal_default`, `placeholder_keys` 字段
+- [ ] 描述能让 agent 判断该用哪个 action
+
+## Action JSON 文件结构
+
+```json
+{
+  "type": "LiquidHandlerTransfer",    // → API 的 action_type
+  "goal": {                           // goal 字段映射
+    "sources": "sources",
+    "targets": "targets",
+    "tip_racks": "tip_racks",
+    "asp_vols": "asp_vols"
+  },
+  "schema": {                         // ← 直接是 goal 的 schema（已提升）
+    "type": "object",
+    "properties": {                   // 参数定义（即请求中 goal 的字段）
+      "sources": { "type": "array", "items": { "type": "object" } },
+      "targets": { "type": "array", "items": { "type": "object" } },
+      "asp_vols": { "type": "array", "items": { "type": "number" } }
+    },
+    "required": [...],
+    "_unilabos_placeholder_info": {   // ← Slot 类型标记
+      "sources": "unilabos_resources",
+      "targets": "unilabos_resources",
+      "tip_racks": "unilabos_resources"
+    }
+  },
+  "goal_default": { ... },            // 默认值
+  "placeholder_keys": {               // ← 汇总所有 Slot 字段
+    "sources": "unilabos_resources",  //    ResourceSlot
+    "targets": "unilabos_resources",
+    "tip_racks": "unilabos_resources",
+    "target_device_id": "unilabos_devices"  // DeviceSlot
+  }
+}
+```
+
+> **注意**：`schema` 已由脚本从原始 `schema.properties.goal` 提升为顶层，直接包含参数定义。
+> `schema.properties` 中的字段即为 API 创建节点返回的 `data.param` 中的字段，PATCH 更新时直接修改 `param` 即可。
+
+## Placeholder Slot 类型体系
+
+`placeholder_keys` / `_unilabos_placeholder_info` 中有 5 种值，对应不同的填写方式：
+
+| placeholder 值         | Slot 类型       | 填写格式                                              | 选取范围                                  |
+| ---------------------- | --------------- | ----------------------------------------------------- | ----------------------------------------- |
+| `unilabos_resources`   | ResourceSlot    | `{"id": "/path/name", "name": "name", "uuid": "xxx"}` | 仅**物料**节点（不含设备）                |
+| `unilabos_devices`     | DeviceSlot      | `"/parent/device_name"`                               | 仅**设备**节点（type=device），路径字符串 |
+| `unilabos_nodes`       | NodeSlot        | `"/parent/node_name"`                                 | **设备 + 物料**，即所有节点，路径字符串   |
+| `unilabos_class`       | ClassSlot       | `"class_name"`                                        | 注册表中已上报的资源类 name               |
+| `unilabos_formulation` | FormulationSlot | `[{well_name, liquids: [{name, volume}]}]`            | 资源树中物料节点的 **name**，配合液体配方 |
+
+### ResourceSlot（`unilabos_resources`）
+
+最常见的类型。从资源树中选取**物料**节点（孔板、枪头盒、试剂槽等）：
+
+- 单个：`{"id": "/workstation/container1", "name": "container1", "uuid": "ff149a9a-..."}`
+- 数组：`[{"id": "/path/a", "name": "a", "uuid": "xxx"}, ...]`
+- `id` 从 parent 计算的路径格式，根据 action 语义选择正确的物料
+
+> **特例**：`create_resource` 的 `res_id`，目标物料可能尚不存在，直接填期望路径，不需要 uuid。
+
+### DeviceSlot / NodeSlot / ClassSlot
+
+- **DeviceSlot**（`unilabos_devices`）：路径字符串如 `"/host_node"`，仅 type=device 的节点
+- **NodeSlot**（`unilabos_nodes`）：路径字符串如 `"/PRCXI/PRCXI_Deck"`，设备 + 物料均可选
+- **ClassSlot**（`unilabos_class`）：类名字符串如 `"container"`，从 `req_resource_registry_upload.json` 查找
+
+### FormulationSlot（`unilabos_formulation`）
+
+描述**液体配方**：向哪些容器中加入哪些液体及体积。
+
+```json
+[
+  {
+    "sample_uuid": "",
+    "well_name": "bottle_A1",
+    "liquids": [{ "name": "LiPF6", "volume": 0.6 }]
+  }
+]
+```
+
+- `well_name` — 目标物料的 **name**（从资源树取，不是 `id` 路径）
+- `liquids[]` — 液体列表，每条含 `name`（试剂名）和 `volume`（体积，单位由上下文决定；pylabrobot 内部统一 uL）
+- `sample_uuid` — 样品 UUID，无样品传 `""`
+- 与 ResourceSlot 的区别：ResourceSlot 指向物料本身，FormulationSlot 引用物料名并附带配方信息
+
+### 通过 API #12 获取资源树
+
+```bash
+curl -s -X GET "$BASE/api/v1/lab/material/download/$lab_uuid" -H "$AUTH"
+```
+
+注意 `lab_uuid` 在路径中（不是查询参数）。返回结构：
+
+```json
+{
+  "code": 0,
+  "data": {
+    "nodes": [
+      {"name": "host_node", "uuid": "c3ec1e68-...", "type": "device", "parent": ""},
+      {"name": "PRCXI", "uuid": "e249c9a6-...", "type": "device", "parent": ""},
+      {"name": "PRCXI_Deck", "uuid": "fb6a8b71-...", "type": "deck", "parent": "PRCXI"}
+    ],
+    "edges": [...]
+  }
+}
+```
+
+- `data.nodes[]` — 所有节点（设备 + 物料），每个节点含 `name`、`uuid`、`type`、`parent`
+- `type` 区分设备（`device`）和物料（`deck`、`container`、`resource` 等）
+- `parent` 为父节点名称（空字符串表示顶级）
+- 填写 Slot 时根据 placeholder 类型筛选：ResourceSlot 取非 device 节点，DeviceSlot 取 device 节点
+- 创建/更新物料时：`parent_uuid` 取父节点的 `uuid`，更新目标的 `uuid` 取节点自身的 `uuid`
+
+## 物料管理 API
+
+设备 Skill 除了设备动作外，还需支持物料节点的创建和参数设定，用于在资源树中动态管理物料。
+
+典型流程：先通过 **#14 按名称查询模板** 获取 `res_template_uuid` → 再通过 **#15 创建物料** → 之后可通过 **#16 更新物料** 修改属性。更新时需要的 `uuid` 和 `parent_uuid` 均从 **#12 资源树下载** 获取。
+
+### API #14 — 按名称查询物料模板
+
+创建物料前，需要先获取物料模板的 UUID。通过模板名称查询：
+
+```bash
+curl -s -X GET "$BASE/api/v1/lab/material/template/by-name?lab_uuid=$lab_uuid&name=<template_name>" -H "$AUTH"
+```
+
+| 参数       | 必填   | 说明                             |
+| ---------- | ------ | -------------------------------- |
+| `lab_uuid` | **是** | 实验室 UUID（从 API #1 获取）    |
+| `name`     | **是** | 物料模板名称（如 `"container"`） |
+
+返回 `code: 0` 时，**`data.uuid`** 即为 `res_template_uuid`，用于 API #15 创建物料。返回还包含 `name`、`resource_type`、`handles`、`config_infos` 等模板元信息。
+
+模板不存在时返回 `code: 10002`，`data` 为空对象。模板名称来自资源注册表中已注册的资源类型。
+
+### API #15 — 创建物料节点
+
+```bash
+curl -s -X POST "$BASE/api/v1/edge/material/node" \
+  -H "$AUTH" -H "Content-Type: application/json" \
+  -d '<request_body>'
+```
+
+请求体：
+
+```json
+{
+  "res_template_uuid": "xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx",
+  "name": "my_custom_bottle",
+  "display_name": "自定义瓶子",
+  "parent_uuid": "xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx",
+  "type": "",
+  "init_param_data": {},
+  "schema": {},
+  "data": {
+    "liquids": [["water", 1000, "uL"]],
+    "max_volume": 50000
+  },
+  "plate_well_datas": {},
+  "plate_reagent_datas": {},
+  "pose": {},
+  "model": {}
+}
+```
+
+| 字段                  | 必填   | 类型          | 数据来源                            | 说明                                   |
+| --------------------- | ------ | ------------- | ----------------------------------- | -------------------------------------- |
+| `res_template_uuid`   | **是** | string (UUID) | **API #14** 按名称查询获取          | 物料模板 UUID                          |
+| `name`                | 否     | string        | **用户自定义**                      | 节点名称（标识符），可自由命名         |
+| `display_name`        | 否     | string        | 用户自定义                          | 显示名称（UI 展示用）                  |
+| `parent_uuid`         | 否     | string (UUID) | **API #12** 资源树中父节点的 `uuid` | 父节点，为空则创建顶级节点             |
+| `type`                | 否     | string        | 从模板继承                          | 节点类型                               |
+| `init_param_data`     | 否     | object        | 用户指定                            | 初始化参数，覆盖模板默认值             |
+| `data`                | 否     | object        | 用户指定                            | 节点数据，container 见下方 data 格式   |
+| `plate_well_datas`    | 否     | object        | 用户指定                            | 孔板子节点数据（创建带孔位的板时使用） |
+| `plate_reagent_datas` | 否     | object        | 用户指定                            | 试剂关联数据                           |
+| `schema`              | 否     | object        | 从模板继承                          | 自定义 schema，不传则从模板继承        |
+| `pose`                | 否     | object        | 用户指定                            | 位姿信息                               |
+| `model`               | 否     | object        | 用户指定                            | 3D 模型信息                            |
+
+#### container 的 `data` 格式
+
+> **体积单位统一为 uL（微升）**。pylabrobot 体系中所有体积值（`max_volume`、`liquids` 中的 volume）均为 uL。外部如果是 mL 需乘 1000 转换。
+
+```json
+{
+  "liquids": [["water", 1000, "uL"], ["ethanol", 500, "uL"]],
+  "max_volume": 50000
+}
+```
+
+- `liquids` — 液体列表，每条为 `[液体名称, 体积(uL), 单位字符串]`
+- `max_volume` — 容器最大容量（uL），如 50 mL = 50000 uL
+
+### API #16 — 更新物料节点
+
+```bash
+curl -s -X PUT "$BASE/api/v1/edge/material/node" \
+  -H "$AUTH" -H "Content-Type: application/json" \
+  -d '<request_body>'
+```
+
+请求体：
+
+```json
+{
+  "uuid": "xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx",
+  "parent_uuid": "xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx",
+  "display_name": "新显示名称",
+  "description": "新描述",
+  "init_param_data": {},
+  "data": {},
+  "pose": {},
+  "schema": {},
+  "extra": {}
+}
+```
+
+| 字段              | 必填   | 类型          | 数据来源                              | 说明             |
+| ----------------- | ------ | ------------- | ------------------------------------- | ---------------- |
+| `uuid`            | **是** | string (UUID) | **API #12** 资源树中目标节点的 `uuid` | 要更新的物料节点 |
+| `parent_uuid`     | 否     | string (UUID) | API #12 资源树                        | 移动到新父节点   |
+| `display_name`    | 否     | string        | 用户指定                              | 更新显示名称     |
+| `description`     | 否     | string        | 用户指定                              | 更新描述         |
+| `init_param_data` | 否     | object        | 用户指定                              | 更新初始化参数   |
+| `data`            | 否     | object        | 用户指定                              | 更新节点数据     |
+| `pose`            | 否     | object        | 用户指定                              | 更新位姿         |
+| `schema`          | 否     | object        | 用户指定                              | 更新 schema      |
+| `extra`           | 否     | object        | 用户指定                              | 更新扩展数据     |
+
+> 只传需要更新的字段，未传的字段保持不变。
+
+## 最终目录结构
+
+```
+./<skill-name>/
+├── SKILL.md              # API 端点 + 渐进加载指引
+├── action-index.md       # 动作索引：描述/用途/核心参数
+└── actions/              # 每个 action 的完整 JSON Schema
+    ├── action1.json
+    ├── action2.json
+    └── ...
+```

.cursor/skills/create-device-skill/scripts/extract_device_actions.py

@@ -0,0 +1,200 @@
+#!/usr/bin/env python3
+"""
+从 req_device_registry_upload.json 中提取指定设备的 action schema。
+
+用法:
+  # 列出所有设备及 action 数量（自动搜索注册表文件）
+  python extract_device_actions.py
+
+  # 指定注册表文件路径
+  python extract_device_actions.py --registry <path/to/req_device_registry_upload.json>
+
+  # 提取指定设备的 action 到目录
+  python extract_device_actions.py <device_id> <output_dir>
+  python extract_device_actions.py --registry <path> <device_id> <output_dir>
+
+示例:
+  python extract_device_actions.py --registry unilabos_data/req_device_registry_upload.json
+  python extract_device_actions.py liquid_handler.prcxi .cursor/skills/unilab-device-api/actions/
+"""
+import json
+import os
+import sys
+from datetime import datetime
+
+REGISTRY_FILENAME = "req_device_registry_upload.json"
+
+def find_registry(explicit_path=None):
+    """
+    查找 req_device_registry_upload.json 文件。
+
+    搜索优先级：
+    1. 用户通过 --registry 显式指定的路径
+    2. <cwd>/unilabos_data/req_device_registry_upload.json
+    3. <cwd>/req_device_registry_upload.json
+    4. <script所在目录>/../../.. (workspace根) 下的 unilabos_data/
+    5. 向上逐级搜索父目录（最多 5 层）
+    """
+    if explicit_path:
+        if os.path.isfile(explicit_path):
+            return explicit_path
+        if os.path.isdir(explicit_path):
+            fp = os.path.join(explicit_path, REGISTRY_FILENAME)
+            if os.path.isfile(fp):
+                return fp
+        print(f"警告: 指定的路径不存在: {explicit_path}")
+        return None
+
+    candidates = [
+        os.path.join("unilabos_data", REGISTRY_FILENAME),
+        REGISTRY_FILENAME,
+    ]
+
+    for c in candidates:
+        if os.path.isfile(c):
+            return c
+
+    script_dir = os.path.dirname(os.path.abspath(__file__))
+    workspace_root = os.path.normpath(os.path.join(script_dir, "..", "..", ".."))
+    for c in candidates:
+        path = os.path.join(workspace_root, c)
+        if os.path.isfile(path):
+            return path
+
+    cwd = os.getcwd()
+    for _ in range(5):
+        parent = os.path.dirname(cwd)
+        if parent == cwd:
+            break
+        cwd = parent
+        for c in candidates:
+            path = os.path.join(cwd, c)
+            if os.path.isfile(path):
+                return path
+
+    return None
+
+def load_registry(path):
+    with open(path, 'r', encoding='utf-8') as f:
+        return json.load(f)
+
+def list_devices(data):
+    """列出所有包含 action_value_mappings 的设备，同时返回 module 路径"""
+    resources = data.get('resources', [])
+    devices = []
+    for res in resources:
+        rid = res.get('id', '')
+        cls = res.get('class', {})
+        avm = cls.get('action_value_mappings', {})
+        module = cls.get('module', '')
+        if avm:
+            devices.append((rid, len(avm), module))
+    return devices
+
+def flatten_schema_to_goal(action_data):
+    """将 schema 中嵌套的 goal 内容提升为顶层 schema，去掉 feedback/result 包装"""
+    schema = action_data.get('schema', {})
+    goal_schema = schema.get('properties', {}).get('goal', {})
+    if goal_schema:
+        action_data = dict(action_data)
+        action_data['schema'] = goal_schema
+    return action_data
+
+
+def extract_actions(data, device_id, output_dir):
+    """提取指定设备的 action schema 到独立 JSON 文件"""
+    resources = data.get('resources', [])
+    for res in resources:
+        if res.get('id') == device_id:
+            cls = res.get('class', {})
+            module = cls.get('module', '')
+            avm = cls.get('action_value_mappings', {})
+            if not avm:
+                print(f"设备 {device_id} 没有 action_value_mappings")
+                return []
+
+            if module:
+                py_path = module.split(":")[0].replace(".", "/") + ".py"
+                class_name = module.split(":")[-1] if ":" in module else ""
+                print(f"Python 源码: {py_path}")
+                if class_name:
+                    print(f"设备类: {class_name}")
+
+            os.makedirs(output_dir, exist_ok=True)
+            written = []
+            for action_name in sorted(avm.keys()):
+                action_data = flatten_schema_to_goal(avm[action_name])
+                filename = action_name.replace('-', '_') + '.json'
+                filepath = os.path.join(output_dir, filename)
+                with open(filepath, 'w', encoding='utf-8') as f:
+                    json.dump(action_data, f, indent=2, ensure_ascii=False)
+                written.append(filename)
+                print(f"  {filepath}")
+            return written
+
+    print(f"设备 {device_id} 未找到")
+    return []
+
+def main():
+    args = sys.argv[1:]
+    explicit_registry = None
+
+    if "--registry" in args:
+        idx = args.index("--registry")
+        if idx + 1 < len(args):
+            explicit_registry = args[idx + 1]
+            args = args[:idx] + args[idx + 2:]
+        else:
+            print("错误: --registry 需要指定路径")
+            sys.exit(1)
+
+    registry_path = find_registry(explicit_registry)
+    if not registry_path:
+        print(f"错误: 找不到 {REGISTRY_FILENAME}")
+        print()
+        print("解决方法:")
+        print("  1. 先运行 unilab 启动命令，等待注册表生成")
+        print("  2. 用 --registry 指定文件路径:")
+        print(f"     python {sys.argv[0]} --registry <path/to/{REGISTRY_FILENAME}>")
+        print()
+        print("搜索过的路径:")
+        for p in [
+            os.path.join("unilabos_data", REGISTRY_FILENAME),
+            REGISTRY_FILENAME,
+            os.path.join("<workspace_root>", "unilabos_data", REGISTRY_FILENAME),
+        ]:
+            print(f"  - {p}")
+        sys.exit(1)
+
+    print(f"注册表: {registry_path}")
+    mtime = os.path.getmtime(registry_path)
+    gen_time = datetime.fromtimestamp(mtime).strftime("%Y-%m-%d %H:%M:%S")
+    size_mb = os.path.getsize(registry_path) / (1024 * 1024)
+    print(f"生成时间: {gen_time}  (文件大小: {size_mb:.1f} MB)")
+    data = load_registry(registry_path)
+
+    if len(args) == 0:
+        devices = list_devices(data)
+        print(f"\n找到 {len(devices)} 个设备:")
+        print(f"{'设备 ID':<50} {'Actions':>7}  {'Python 模块'}")
+        print("-" * 120)
+        for did, count, module in sorted(devices, key=lambda x: x[0]):
+            py_path = module.split(":")[0].replace(".", "/") + ".py" if module else ""
+            print(f"{did:<50} {count:>7}  {py_path}")
+
+    elif len(args) == 2:
+        device_id = args[0]
+        output_dir = args[1]
+        print(f"\n提取 {device_id} 的 actions 到 {output_dir}/")
+        written = extract_actions(data, device_id, output_dir)
+        if written:
+            print(f"\n共写入 {len(written)} 个 action 文件")
+
+    else:
+        print("用法:")
+        print("  python extract_device_actions.py [--registry <path>]                # 列出设备")
+        print("  python extract_device_actions.py [--registry <path>] <device_id> <dir>  # 提取 actions")
+        sys.exit(1)
+
+if __name__ == '__main__':
+    main()

.cursor/skills/create-device-skill/scripts/gen_auth.py

@@ -0,0 +1,69 @@
+#!/usr/bin/env python3
+"""
+从 ak/sk 生成 UniLab API Authorization header。
+
+算法: base64(ak:sk) → "Authorization: Lab <token>"
+
+用法:
+  python gen_auth.py <ak> <sk>
+  python gen_auth.py --config <config.py>
+
+示例:
+  python gen_auth.py myak mysk
+  python gen_auth.py --config experiments/config.py
+"""
+import base64
+import re
+import sys
+
+
+def gen_auth(ak: str, sk: str) -> str:
+    token = base64.b64encode(f"{ak}:{sk}".encode("utf-8")).decode("utf-8")
+    return token
+
+
+def extract_from_config(config_path: str) -> tuple:
+    """从 config.py 中提取 ak 和 sk"""
+    with open(config_path, "r", encoding="utf-8") as f:
+        content = f.read()
+    ak_match = re.search(r'''ak\s*=\s*["']([^"']+)["']''', content)
+    sk_match = re.search(r'''sk\s*=\s*["']([^"']+)["']''', content)
+    if not ak_match or not sk_match:
+        return None, None
+    return ak_match.group(1), sk_match.group(1)
+
+
+def main():
+    args = sys.argv[1:]
+
+    if len(args) == 2 and args[0] == "--config":
+        ak, sk = extract_from_config(args[1])
+        if not ak or not sk:
+            print(f"错误: 在 {args[1]} 中未找到 ak/sk 配置")
+            print("期望格式: ak = \"xxx\"  sk = \"xxx\"")
+            sys.exit(1)
+        print(f"配置文件: {args[1]}")
+    elif len(args) == 2:
+        ak, sk = args
+    else:
+        print("用法:")
+        print("  python gen_auth.py <ak> <sk>")
+        print("  python gen_auth.py --config <config.py>")
+        sys.exit(1)
+
+    token = gen_auth(ak, sk)
+    print(f"ak: {ak}")
+    print(f"sk: {sk}")
+    print()
+    print(f"Authorization header:")
+    print(f"  Authorization: Lab {token}")
+    print()
+    print(f"curl 用法:")
+    print(f'  curl -H "Authorization: Lab {token}" ...')
+    print()
+    print(f"Shell 变量:")
+    print(f'  AUTH="Authorization: Lab {token}"')
+
+
+if __name__ == "__main__":
+    main()

.cursor/skills/host-node/SKILL.md

@@ -0,0 +1,251 @@
+---
+name: host-node
+description: Operate Uni-Lab host node via REST API — create resources, test latency, test resource tree, manual confirm. Use when the user mentions host_node, creating resources, resource management, testing latency, or any host node operation.
+---
+
+# Host Node API Skill
+
+## 设备信息
+
+- **device_id**: `host_node`
+- **Python 源码**: `unilabos/ros/nodes/presets/host_node.py`
+- **设备类**: `HostNode`
+- **动作数**: 4（`create_resource`, `test_latency`, `auto-test_resource`, `manual_confirm`）
+
+## 前置条件（缺一不可）
+
+使用本 skill 前，**必须**先确认以下信息。如果缺少任何一项，**立即向用户询问并终止**，等补齐后再继续。
+
+### 1. ak / sk → AUTH
+
+从启动参数 `--ak` `--sk` 或 config.py 中获取，生成 token：`base64(ak:sk)` → `Authorization: Lab <token>`
+
+### 2. --addr → BASE URL
+
+| `--addr` 值  | BASE                                |
+| ------------ | ----------------------------------- |
+| `test`       | `https://leap-lab.test.bohrium.com` |
+| `uat`        | `https://leap-lab.uat.bohrium.com`  |
+| `local`      | `http://127.0.0.1:48197`            |
+| 不传（默认） | `https://leap-lab.bohrium.com`      |
+
+确认后设置：
+
+```bash
+BASE="<根据 addr 确定的 URL>"
+AUTH="Authorization: Lab <token>"
+```
+
+**两项全部就绪后才可发起 API 请求。**
+
+## Session State
+
+在整个对话过程中，agent 需要记住以下状态，避免重复询问用户：
+
+- `lab_uuid` — 实验室 UUID（首次通过 API #1 自动获取，**不需要问用户**）
+- `device_name` — `host_node`
+
+## 请求约定
+
+所有请求使用 `curl -s`，POST/PATCH/DELETE 需加 `Content-Type: application/json`。
+
+> **Windows 平台**必须使用 `curl.exe`（而非 PowerShell 的 `curl` 别名）。
+
+---
+
+## API Endpoints
+
+### 1. 获取实验室信息（自动获取 lab_uuid）
+
+```bash
+curl -s -X GET "$BASE/api/v1/edge/lab/info" -H "$AUTH"
+```
+
+返回 `data.uuid` 为 `lab_uuid`，`data.name` 为 `lab_name`。
+
+### 2. 创建工作流
+
+```bash
+curl -s -X POST "$BASE/api/v1/lab/workflow/owner" \
+  -H "$AUTH" -H "Content-Type: application/json" \
+  -d '{"name":"<名称>","lab_uuid":"<lab_uuid>","description":"<描述>"}'
+```
+
+返回 `data.uuid` 为 `workflow_uuid`。创建成功后告知用户链接：`$BASE/laboratory/$lab_uuid/workflow/$workflow_uuid`
+
+### 3. 创建节点
+
+```bash
+curl -s -X POST "$BASE/api/v1/edge/workflow/node" \
+  -H "$AUTH" -H "Content-Type: application/json" \
+  -d '{"workflow_uuid":"<workflow_uuid>","resource_template_name":"host_node","node_template_name":"<action_name>"}'
+```
+
+- `resource_template_name` 固定为 `host_node`
+- `node_template_name` — action 名称（如 `create_resource`, `test_latency`）
+
+### 4. 删除节点
+
+```bash
+curl -s -X DELETE "$BASE/api/v1/lab/workflow/nodes" \
+  -H "$AUTH" -H "Content-Type: application/json" \
+  -d '{"node_uuids":["<uuid1>"],"workflow_uuid":"<workflow_uuid>"}'
+```
+
+### 5. 更新节点参数
+
+```bash
+curl -s -X PATCH "$BASE/api/v1/lab/workflow/node" \
+  -H "$AUTH" -H "Content-Type: application/json" \
+  -d '{"workflow_uuid":"<wf_uuid>","uuid":"<node_uuid>","param":{...}}'
+```
+
+`param` 直接使用创建节点返回的 `data.param` 结构，修改需要填入的字段值。参考 [action-index.md](action-index.md) 确定哪些字段是 Slot。
+
+### 6. 查询节点 handles
+
+```bash
+curl -s -X POST "$BASE/api/v1/lab/workflow/node-handles" \
+  -H "$AUTH" -H "Content-Type: application/json" \
+  -d '{"node_uuids":["<node_uuid_1>","<node_uuid_2>"]}'
+```
+
+### 7. 批量创建边
+
+```bash
+curl -s -X POST "$BASE/api/v1/lab/workflow/edges" \
+  -H "$AUTH" -H "Content-Type: application/json" \
+  -d '{"edges":[{"source_node_uuid":"<uuid>","target_node_uuid":"<uuid>","source_handle_uuid":"<uuid>","target_handle_uuid":"<uuid>"}]}'
+```
+
+### 8. 启动工作流
+
+```bash
+curl -s -X POST "$BASE/api/v1/lab/workflow/<workflow_uuid>/run" -H "$AUTH"
+```
+
+### 9. 运行设备单动作
+
+```bash
+curl -s -X POST "$BASE/api/v1/lab/mcp/run/action" \
+  -H "$AUTH" -H "Content-Type: application/json" \
+  -d '{"lab_uuid":"<lab_uuid>","device_id":"host_node","action":"<action_name>","action_type":"<type>","param":{...}}'
+```
+
+`param` 直接放 goal 里的属性，**不要**再包一层 `{"goal": {...}}`。
+
+> **WARNING: `action_type` 必须正确，传错会导致任务永远卡住无法完成。** 从下表或 `actions/<name>.json` 的 `type` 字段获取。
+
+#### action_type 速查表
+
+| action | action_type |
+|--------|-------------|
+| `test_latency` | `UniLabJsonCommand` |
+| `create_resource` | `ResourceCreateFromOuterEasy` |
+| `auto-test_resource` | `UniLabJsonCommand` |
+| `manual_confirm` | `UniLabJsonCommand` |
+
+### 10. 查询任务状态
+
+```bash
+curl -s -X GET "$BASE/api/v1/lab/mcp/task/<task_uuid>" -H "$AUTH"
+```
+
+### 11. 运行工作流单节点
+
+```bash
+curl -s -X POST "$BASE/api/v1/lab/mcp/run/workflow/action" \
+  -H "$AUTH" -H "Content-Type: application/json" \
+  -d '{"node_uuid":"<node_uuid>"}'
+```
+
+### 12. 获取资源树（物料信息）
+
+```bash
+curl -s -X GET "$BASE/api/v1/lab/material/download/$lab_uuid" -H "$AUTH"
+```
+
+注意 `lab_uuid` 在路径中。返回 `data.nodes[]` 含所有节点（设备 + 物料），每个节点含 `name`、`uuid`、`type`、`parent`。
+
+### 13. 获取工作流模板详情
+
+```bash
+curl -s -X GET "$BASE/api/v1/lab/workflow/template/detail/$workflow_uuid" -H "$AUTH"
+```
+
+> 必须使用 `/lab/workflow/template/detail/{uuid}`，其他路径会返回 404。
+
+### 14. 按名称查询物料模板
+
+```bash
+curl -s -X GET "$BASE/api/v1/lab/material/template/by-name?lab_uuid=$lab_uuid&name=<template_name>" -H "$AUTH"
+```
+
+返回 `data.uuid` 为 `res_template_uuid`，用于 API #15。
+
+### 15. 创建物料节点
+
+```bash
+curl -s -X POST "$BASE/api/v1/edge/material/node" \
+  -H "$AUTH" -H "Content-Type: application/json" \
+  -d '{"res_template_uuid":"<uuid>","name":"<名称>","display_name":"<显示名>","parent_uuid":"<父节点uuid>","data":{...}}'
+```
+
+### 16. 更新物料节点
+
+```bash
+curl -s -X PUT "$BASE/api/v1/edge/material/node" \
+  -H "$AUTH" -H "Content-Type: application/json" \
+  -d '{"uuid":"<节点uuid>","display_name":"<新名称>","data":{...}}'
+```
+
+---
+
+## Placeholder Slot 填写规则
+
+| `placeholder_keys` 值 | Slot 类型    | 填写格式                                              | 选取范围               |
+| --------------------- | ------------ | ----------------------------------------------------- | ---------------------- |
+| `unilabos_resources`  | ResourceSlot | `{"id": "/path/name", "name": "name", "uuid": "xxx"}` | 仅物料节点（非设备）   |
+| `unilabos_devices`    | DeviceSlot   | `"/parent/device_name"`                               | 仅设备节点（type=device） |
+| `unilabos_nodes`      | NodeSlot     | `"/parent/node_name"`                                 | 所有节点（设备 + 物料）   |
+| `unilabos_class`      | ClassSlot    | `"class_name"`                                        | 注册表中已注册的资源类    |
+
+### host_node 设备的 Slot 字段表
+
+| Action            | 字段        | Slot 类型    | 说明                           |
+| ----------------- | ----------- | ------------ | ------------------------------ |
+| `create_resource` | `res_id`    | ResourceSlot | 新资源路径（可填不存在的路径） |
+| `create_resource` | `device_id` | DeviceSlot   | 归属设备                       |
+| `create_resource` | `parent`    | NodeSlot     | 父节点路径                     |
+| `create_resource` | `class_name`| ClassSlot    | 资源类名如 `"container"`       |
+| `auto-test_resource` | `resource`  | ResourceSlot | 单个测试物料                |
+| `auto-test_resource` | `resources` | ResourceSlot | 测试物料数组                |
+| `auto-test_resource` | `device`    | DeviceSlot   | 测试设备                    |
+| `auto-test_resource` | `devices`   | DeviceSlot   | 测试设备                    |
+
+---
+
+## 渐进加载策略
+
+1. **SKILL.md**（本文件）— API 端点 + session state 管理
+2. **[action-index.md](action-index.md)** — 按分类浏览 4 个动作的描述和核心参数
+3. **[actions/\<name\>.json](actions/)** — 仅在需要构建具体请求时，加载对应 action 的完整 JSON Schema
+
+---
+
+## 完整工作流 Checklist
+
+```
+Task Progress:
+- [ ] Step 1: GET /edge/lab/info 获取 lab_uuid
+- [ ] Step 2: 获取资源树 (GET #12) → 记住可用物料
+- [ ] Step 3: 读 action-index.md 确定要用的 action 名
+- [ ] Step 4: 创建工作流 (POST #2) → 记住 workflow_uuid，告知用户链接
+- [ ] Step 5: 创建节点 (POST #3, resource_template_name=host_node) → 记住 node_uuid + data.param
+- [ ] Step 6: 根据 _unilabos_placeholder_info 和资源树，填写 data.param 中的 Slot 字段
+- [ ] Step 7: 更新节点参数 (PATCH #5)
+- [ ] Step 8: 查询节点 handles (POST #6) → 获取各节点的 handle_uuid
+- [ ] Step 9: 批量创建边 (POST #7) → 用 handle_uuid 连接节点
+- [ ] Step 10: 启动工作流 (POST #8) 或运行单节点 (POST #11)
+- [ ] Step 11: 查询任务状态 (GET #10) 确认完成
+```

.cursor/skills/host-node/action-index.md

@@ -0,0 +1,58 @@
+# Action Index — host_node
+
+4 个动作，按功能分类。每个动作的完整 JSON Schema 在 `actions/<name>.json`。
+
+---
+
+## 资源管理
+
+### `create_resource`
+
+在资源树中创建新资源（容器、物料等），支持指定位置、类型和初始液体
+
+- **action_type**: `ResourceCreateFromOuterEasy`
+- **Schema**: [`actions/create_resource.json`](actions/create_resource.json)
+- **可选参数**: `res_id`, `device_id`, `class_name`, `parent`, `bind_locations`, `liquid_input_slot`, `liquid_type`, `liquid_volume`, `slot_on_deck`
+- **占位符字段**:
+  - `res_id` — **ResourceSlot**（特例：目标物料可能尚不存在，直接填期望路径）
+  - `device_id` — **DeviceSlot**，填路径字符串如 `"/host_node"`
+  - `parent` — **NodeSlot**，填路径字符串如 `"/workstation/deck"`
+  - `class_name` — **ClassSlot**，填类名如 `"container"`
+
+### `auto-test_resource`
+
+测试资源系统，返回当前资源树和设备列表
+
+- **action_type**: `UniLabJsonCommand`
+- **Schema**: [`actions/test_resource.json`](actions/test_resource.json)
+- **可选参数**: `resource`, `resources`, `device`, `devices`
+- **占位符字段**:
+  - `resource` — **ResourceSlot**，单个物料节点 `{id, name, uuid}`
+  - `resources` — **ResourceSlot**，物料节点数组 `[{id, name, uuid}, ...]`
+  - `device` — **DeviceSlot**，设备路径字符串
+  - `devices` — **DeviceSlot**，设备路径字符串
+
+---
+
+## 系统工具
+
+### `test_latency`
+
+测试设备通信延迟，返回 RTT、时间差、任务延迟等指标
+
+- **action_type**: `UniLabJsonCommand`
+- **Schema**: [`actions/test_latency.json`](actions/test_latency.json)
+- **参数**: 无（零参数调用）
+
+---
+
+## 人工确认
+
+### `manual_confirm`
+
+创建人工确认节点，等待用户手动确认后继续
+
+- **action_type**: `UniLabJsonCommand`
+- **Schema**: [`actions/manual_confirm.json`](actions/manual_confirm.json)
+- **核心参数**: `timeout_seconds`（超时时间，秒）, `assignee_user_ids`（指派用户 ID 列表）
+- **占位符字段**: `assignee_user_ids` — `unilabos_manual_confirm` 类型

.cursor/skills/host-node/actions/create_resource.json

@@ -0,0 +1,93 @@
+{
+  "type": "ResourceCreateFromOuterEasy",
+  "goal": {
+    "res_id": "res_id",
+    "class_name": "class_name",
+    "parent": "parent",
+    "device_id": "device_id",
+    "bind_locations": "bind_locations",
+    "liquid_input_slot": "liquid_input_slot[]",
+    "liquid_type": "liquid_type[]",
+    "liquid_volume": "liquid_volume[]",
+    "slot_on_deck": "slot_on_deck"
+  },
+  "schema": {
+    "type": "object",
+    "properties": {
+      "res_id": {
+        "type": "string"
+      },
+      "device_id": {
+        "type": "string"
+      },
+      "class_name": {
+        "type": "string"
+      },
+      "parent": {
+        "type": "string"
+      },
+      "bind_locations": {
+        "type": "object",
+        "properties": {
+          "x": {
+            "type": "number",
+            "minimum": -1.7976931348623157e+308,
+            "maximum": 1.7976931348623157e+308
+          },
+          "y": {
+            "type": "number",
+            "minimum": -1.7976931348623157e+308,
+            "maximum": 1.7976931348623157e+308
+          },
+          "z": {
+            "type": "number",
+            "minimum": -1.7976931348623157e+308,
+            "maximum": 1.7976931348623157e+308
+          }
+        },
+        "required": [
+          "x",
+          "y",
+          "z"
+        ],
+        "title": "bind_locations",
+        "additionalProperties": false
+      },
+      "liquid_input_slot": {
+        "type": "array",
+        "items": {
+          "type": "integer"
+        }
+      },
+      "liquid_type": {
+        "type": "array",
+        "items": {
+          "type": "string"
+        }
+      },
+      "liquid_volume": {
+        "type": "array",
+        "items": {
+          "type": "number"
+        }
+      },
+      "slot_on_deck": {
+        "type": "string"
+      }
+    },
+    "required": [],
+    "_unilabos_placeholder_info": {
+      "res_id": "unilabos_resources",
+      "device_id": "unilabos_devices",
+      "parent": "unilabos_nodes",
+      "class_name": "unilabos_class"
+    }
+  },
+  "goal_default": {},
+  "placeholder_keys": {
+    "res_id": "unilabos_resources",
+    "device_id": "unilabos_devices",
+    "parent": "unilabos_nodes",
+    "class_name": "unilabos_class"
+  }
+}

.cursor/skills/host-node/actions/manual_confirm.json

@@ -0,0 +1,32 @@
+{
+  "type": "UniLabJsonCommand",
+  "goal": {
+    "timeout_seconds": "timeout_seconds",
+    "assignee_user_ids": "assignee_user_ids"
+  },
+  "schema": {
+    "type": "object",
+    "properties": {
+      "timeout_seconds": {
+        "type": "integer"
+      },
+      "assignee_user_ids": {
+        "type": "array",
+        "items": {
+          "type": "string"
+        }
+      }
+    },
+    "required": [
+      "timeout_seconds",
+      "assignee_user_ids"
+    ],
+    "_unilabos_placeholder_info": {
+      "assignee_user_ids": "unilabos_manual_confirm"
+    }
+  },
+  "goal_default": {},
+  "placeholder_keys": {
+    "assignee_user_ids": "unilabos_manual_confirm"
+  }
+}

.cursor/skills/host-node/actions/test_latency.json

@@ -0,0 +1,11 @@
+{
+  "type": "UniLabJsonCommand",
+  "goal": {},
+  "schema": {
+    "type": "object",
+    "properties": {},
+    "required": []
+  },
+  "goal_default": {},
+  "placeholder_keys": {}
+}

.cursor/skills/host-node/actions/test_resource.json

@@ -0,0 +1,255 @@
+{
+  "type": "UniLabJsonCommand",
+  "goal": {
+    "resource": "resource",
+    "resources": "resources",
+    "device": "device",
+    "devices": "devices"
+  },
+  "schema": {
+    "type": "object",
+    "properties": {
+      "resource": {
+        "type": "object",
+        "additionalProperties": false,
+        "properties": {
+          "id": {
+            "type": "string"
+          },
+          "name": {
+            "type": "string"
+          },
+          "sample_id": {
+            "type": "string"
+          },
+          "children": {
+            "type": "array",
+            "items": {
+              "type": "string"
+            }
+          },
+          "parent": {
+            "type": "string"
+          },
+          "type": {
+            "type": "string"
+          },
+          "category": {
+            "type": "string"
+          },
+          "pose": {
+            "type": "object",
+            "properties": {
+              "position": {
+                "type": "object",
+                "properties": {
+                  "x": {
+                    "type": "number",
+                    "minimum": -1.7976931348623157e+308,
+                    "maximum": 1.7976931348623157e+308
+                  },
+                  "y": {
+                    "type": "number",
+                    "minimum": -1.7976931348623157e+308,
+                    "maximum": 1.7976931348623157e+308
+                  },
+                  "z": {
+                    "type": "number",
+                    "minimum": -1.7976931348623157e+308,
+                    "maximum": 1.7976931348623157e+308
+                  }
+                },
+                "required": [
+                  "x",
+                  "y",
+                  "z"
+                ],
+                "title": "position",
+                "additionalProperties": false
+              },
+              "orientation": {
+                "type": "object",
+                "properties": {
+                  "x": {
+                    "type": "number",
+                    "minimum": -1.7976931348623157e+308,
+                    "maximum": 1.7976931348623157e+308
+                  },
+                  "y": {
+                    "type": "number",
+                    "minimum": -1.7976931348623157e+308,
+                    "maximum": 1.7976931348623157e+308
+                  },
+                  "z": {
+                    "type": "number",
+                    "minimum": -1.7976931348623157e+308,
+                    "maximum": 1.7976931348623157e+308
+                  },
+                  "w": {
+                    "type": "number",
+                    "minimum": -1.7976931348623157e+308,
+                    "maximum": 1.7976931348623157e+308
+                  }
+                },
+                "required": [
+                  "x",
+                  "y",
+                  "z",
+                  "w"
+                ],
+                "title": "orientation",
+                "additionalProperties": false
+              }
+            },
+            "required": [
+              "position",
+              "orientation"
+            ],
+            "title": "pose",
+            "additionalProperties": false
+          },
+          "config": {
+            "type": "string"
+          },
+          "data": {
+            "type": "string"
+          }
+        },
+        "title": "resource"
+      },
+      "resources": {
+        "items": {
+          "type": "object",
+          "additionalProperties": false,
+          "properties": {
+            "id": {
+              "type": "string"
+            },
+            "name": {
+              "type": "string"
+            },
+            "sample_id": {
+              "type": "string"
+            },
+            "children": {
+              "type": "array",
+              "items": {
+                "type": "string"
+              }
+            },
+            "parent": {
+              "type": "string"
+            },
+            "type": {
+              "type": "string"
+            },
+            "category": {
+              "type": "string"
+            },
+            "pose": {
+              "type": "object",
+              "properties": {
+                "position": {
+                  "type": "object",
+                  "properties": {
+                    "x": {
+                      "type": "number",
+                      "minimum": -1.7976931348623157e+308,
+                      "maximum": 1.7976931348623157e+308
+                    },
+                    "y": {
+                      "type": "number",
+                      "minimum": -1.7976931348623157e+308,
+                      "maximum": 1.7976931348623157e+308
+                    },
+                    "z": {
+                      "type": "number",
+                      "minimum": -1.7976931348623157e+308,
+                      "maximum": 1.7976931348623157e+308
+                    }
+                  },
+                  "required": [
+                    "x",
+                    "y",
+                    "z"
+                  ],
+                  "title": "position",
+                  "additionalProperties": false
+                },
+                "orientation": {
+                  "type": "object",
+                  "properties": {
+                    "x": {
+                      "type": "number",
+                      "minimum": -1.7976931348623157e+308,
+                      "maximum": 1.7976931348623157e+308
+                    },
+                    "y": {
+                      "type": "number",
+                      "minimum": -1.7976931348623157e+308,
+                      "maximum": 1.7976931348623157e+308
+                    },
+                    "z": {
+                      "type": "number",
+                      "minimum": -1.7976931348623157e+308,
+                      "maximum": 1.7976931348623157e+308
+                    },
+                    "w": {
+                      "type": "number",
+                      "minimum": -1.7976931348623157e+308,
+                      "maximum": 1.7976931348623157e+308
+                    }
+                  },
+                  "required": [
+                    "x",
+                    "y",
+                    "z",
+                    "w"
+                  ],
+                  "title": "orientation",
+                  "additionalProperties": false
+                }
+              },
+              "required": [
+                "position",
+                "orientation"
+              ],
+              "title": "pose",
+              "additionalProperties": false
+            },
+            "config": {
+              "type": "string"
+            },
+            "data": {
+              "type": "string"
+            }
+          },
+          "title": "resources"
+        },
+        "type": "array"
+      },
+      "device": {
+        "type": "string",
+        "description": "device reference"
+      },
+      "devices": {
+        "type": "string",
+        "description": "device reference"
+      }
+    },
+    "required": [],
+    "_unilabos_placeholder_info": {
+      "resource": "unilabos_resources",
+      "resources": "unilabos_resources",
+      "device": "unilabos_devices",
+      "devices": "unilabos_devices"
+    }
+  },
+  "goal_default": {},
+  "placeholder_keys": {
+    "resource": "unilabos_resources",
+    "resources": "unilabos_resources",
+    "device": "unilabos_devices",
+    "devices": "unilabos_devices"
+  }
+}

.cursor/skills/submit-agent-result/SKILL.md

@@ -0,0 +1,284 @@
+---
+name: submit-agent-result
+description: Submit historical experiment results (agent_result) to Uni-Lab cloud platform (leap-lab) notebook — read data files, assemble JSON payload, PUT to cloud API. Use when the user wants to submit experiment results, upload agent results, report experiment data, or mentions agent_result/实验结果/历史记录/notebook结果.
+---
+
+# Uni-Lab 提交历史实验记录指南
+
+通过 Uni-Lab 云端 API 向已创建的 notebook 提交实验结果数据（agent_result）。支持从 JSON / CSV 文件读取数据，整合后提交。
+
+> **重要**：本指南中的 `Authorization: Lab <token>` 是 **Uni-Lab 平台专用的认证方式**，`Lab` 是 Uni-Lab 的 auth scheme 关键字，**不是** HTTP Basic 认证。请勿将其替换为 `Basic`。
+
+## 前置条件（缺一不可）
+
+使用本指南前，**必须**先确认以下信息。如果缺少任何一项，**立即向用户询问并终止**，等补齐后再继续。
+
+### 1. ak / sk → AUTH
+
+询问用户的启动参数，从 `--ak` `--sk` 或 config.py 中获取。
+
+生成 AUTH token：
+
+```bash
+# ⚠️ 注意：scheme 是 "Lab"（Uni-Lab 专用），不是 "Basic"
+python -c "import base64,sys; print(base64.b64encode(f'{sys.argv[1]}:{sys.argv[2]}'.encode()).decode())" <ak> <sk>
+```
+
+输出即为 token 值，拼接为 `Authorization: Lab <token>`（`Lab` 是 Uni-Lab 平台 auth scheme，不可替换为 `Basic`）。
+
+### 2. --addr → BASE URL
+
+| `--addr` 值  | BASE                                |
+| ------------ | ----------------------------------- |
+| `test`       | `https://leap-lab.test.bohrium.com` |
+| `uat`        | `https://leap-lab.uat.bohrium.com`  |
+| `local`      | `http://127.0.0.1:48197`            |
+| 不传（默认） | `https://leap-lab.bohrium.com`      |
+
+确认后设置：
+
+```bash
+BASE="<根据 addr 确定的 URL>"
+# ⚠️ Auth scheme 必须是 "Lab"（Uni-Lab 专用），不是 "Basic"
+AUTH="Authorization: Lab <上面命令输出的 token>"
+```
+
+### 3. notebook_uuid（**必须询问用户**）
+
+**必须主动询问用户**：「请提供要提交结果的 notebook UUID。」
+
+notebook_uuid 来自之前通过「批量提交实验」创建的实验批次，即 `POST /api/v1/lab/notebook` 返回的 `data.uuid`。
+
+如果用户不记得，可提示：
+
+- 查看之前的对话记录中创建 notebook 时返回的 UUID
+- 或通过平台页面查找对应的 notebook
+
+**绝不能跳过此步骤，没有 notebook_uuid 无法提交。**
+
+### 4. 实验结果数据
+
+用户需要提供实验结果数据，支持以下方式：
+
+| 方式      | 说明                                            |
+| --------- | ----------------------------------------------- |
+| JSON 文件 | 直接作为 `agent_result` 的内容合并              |
+| CSV 文件  | 转为 `{"文件名": [行数据...]}` 格式             |
+| 手动指定  | 用户直接告知 key-value 数据，由 agent 构建 JSON |
+
+**四项全部就绪后才可开始。**
+
+## Session State
+
+在整个对话过程中，agent 需要记住以下状态：
+
+- `lab_uuid` — 实验室 UUID（通过 API #1 自动获取，**不需要问用户**）
+- `notebook_uuid` — 目标 notebook UUID（**必须询问用户**）
+
+## 请求约定
+
+所有请求使用 `curl -s`，PUT 需加 `Content-Type: application/json`。
+
+> **Windows 平台**必须使用 `curl.exe`（而非 PowerShell 的 `curl` 别名），示例中的 `curl` 均指 `curl.exe`。
+>
+> **PowerShell JSON 传参**：PowerShell 中 `-d '{"key":"value"}'` 会因引号转义失败。请将 JSON 写入临时文件，用 `-d '@tmp_body.json'`（单引号包裹 `@`，否则 `@` 会被 PowerShell 解析为 splatting 运算符导致报错）。
+
+---
+
+## API Endpoints
+
+### 1. 获取实验室信息（自动获取 lab_uuid）
+
+```bash
+curl -s -X GET "$BASE/api/v1/edge/lab/info" -H "$AUTH"
+```
+
+返回：
+
+```json
+{ "code": 0, "data": { "uuid": "xxx", "name": "实验室名称" } }
+```
+
+记住 `data.uuid` 为 `lab_uuid`。
+
+### 2. 提交实验结果（agent_result）
+
+```bash
+curl -s -X PUT "$BASE/api/v1/lab/notebook/agent-result" \
+  -H "$AUTH" -H "Content-Type: application/json" \
+  -d '<request_body>'
+```
+
+请求体结构：
+
+```json
+{
+    "notebook_uuid": "<notebook_uuid>",
+    "agent_result": {
+        "<key1>": "<value1>",
+        "<key2>": 123,
+        "<nested_key>": {"a": 1, "b": 2},
+        "<array_key>": [{"col1": "v1", "col2": "v2"}, ...]
+    }
+}
+```
+
+> **注意**：HTTP 方法是 **PUT**（不是 POST）。
+
+#### 必要字段
+
+| 字段            | 类型          | 说明                                        |
+| --------------- | ------------- | ------------------------------------------- |
+| `notebook_uuid` | string (UUID) | 目标 notebook 的 UUID，从批量提交实验时获取 |
+| `agent_result`  | object        | 实验结果数据，任意 JSON 对象                |
+
+#### agent_result 内容格式
+
+`agent_result` 接受**任意 JSON 对象**，常见格式：
+
+**简单键值对**：
+
+```json
+{
+  "avg_rtt_ms": 12.5,
+  "status": "success",
+  "test_count": 5
+}
+```
+
+**包含嵌套结构**：
+
+```json
+{
+  "summary": { "total": 100, "passed": 98, "failed": 2 },
+  "measurements": [
+    { "sample_id": "S001", "value": 3.14, "unit": "mg/mL" },
+    { "sample_id": "S002", "value": 2.71, "unit": "mg/mL" }
+  ]
+}
+```
+
+**从 CSV 文件导入**（脚本自动转换）：
+
+```json
+{
+  "experiment_data": [
+    { "温度": 25, "压力": 101.3, "产率": 0.85 },
+    { "温度": 30, "压力": 101.3, "产率": 0.91 }
+  ]
+}
+```
+
+---
+
+## 整合脚本
+
+本文档同级目录下的 `scripts/prepare_agent_result.py` 可自动读取文件并构建请求体。
+
+### 用法
+
+```bash
+python scripts/prepare_agent_result.py \
+    --notebook-uuid <uuid> \
+    --files data1.json data2.csv \
+    [--auth <token>] \
+    [--base <BASE_URL>] \
+    [--submit] \
+    [--output <output.json>]
+```
+
+| 参数              | 必选       | 说明                                            |
+| ----------------- | ---------- | ----------------------------------------------- |
+| `--notebook-uuid` | 是         | 目标 notebook UUID                              |
+| `--files`         | 是         | 输入文件路径（支持多个，JSON / CSV）            |
+| `--auth`          | 提交时必选 | Lab token（base64(ak:sk)）                      |
+| `--base`          | 提交时必选 | API base URL                                    |
+| `--submit`        | 否         | 加上此标志则直接提交到云端                      |
+| `--output`        | 否         | 输出 JSON 路径（默认 `agent_result_body.json`） |
+
+### 文件合并规则
+
+| 文件类型              | 合并方式                                     |
+| --------------------- | -------------------------------------------- |
+| `.json`（dict）       | 字段直接合并到 `agent_result` 顶层           |
+| `.json`（list/other） | 以文件名为 key 放入 `agent_result`           |
+| `.csv`                | 以文件名（不含扩展名）为 key，值为行对象数组 |
+
+多个文件的字段会合并。JSON dict 中的重复 key 后者覆盖前者。
+
+### 示例
+
+```bash
+# 仅生成请求体文件（不提交）
+python scripts/prepare_agent_result.py \
+    --notebook-uuid 73c67dca-c8cc-4936-85a0-329106aa7cca \
+    --files results.json measurements.csv
+
+# 生成并直接提交
+python scripts/prepare_agent_result.py \
+    --notebook-uuid 73c67dca-c8cc-4936-85a0-329106aa7cca \
+    --files results.json \
+    --auth YTFmZDlkNGUt... \
+    --base https://leap-lab.test.bohrium.com \
+    --submit
+```
+
+---
+
+## 手动构建方式
+
+如果不使用脚本，也可手动构建请求体：
+
+1. 将实验结果数据组装为 JSON 对象
+2. 写入临时文件：
+
+```json
+{
+    "notebook_uuid": "<uuid>",
+    "agent_result": { ... }
+}
+```
+
+3. 用 curl 提交：
+
+```bash
+curl -s -X PUT "$BASE/api/v1/lab/notebook/agent-result" \
+  -H "$AUTH" -H "Content-Type: application/json" \
+  -d '@tmp_body.json'
+```
+
+---
+
+## 完整工作流 Checklist
+
+```
+Task Progress:
+- [ ] Step 1: 确认 ak/sk → 生成 AUTH token
+- [ ] Step 2: 确认 --addr → 设置 BASE URL
+- [ ] Step 3: GET /edge/lab/info → 获取 lab_uuid
+- [ ] Step 4: **询问用户** notebook_uuid（必须，不可跳过）
+- [ ] Step 5: 确认实验结果数据来源（文件路径或手动数据）
+- [ ] Step 6: 运行 prepare_agent_result.py 或手动构建请求体
+- [ ] Step 7: PUT /lab/notebook/agent-result 提交
+- [ ] Step 8: 检查返回结果，确认提交成功
+```
+
+---
+
+## 常见问题
+
+### Q: notebook_uuid 从哪里获取？
+
+从之前「批量提交实验」时 `POST /api/v1/lab/notebook` 的返回值 `data.uuid` 获取。也可以在平台 UI 中查找对应的 notebook。
+
+### Q: agent_result 有固定的 schema 吗？
+
+没有严格 schema，接受任意 JSON 对象。但建议包含有意义的字段名和结构化数据，方便后续分析。
+
+### Q: 可以多次提交同一个 notebook 的结果吗？
+
+可以，后续提交会覆盖之前的 agent_result。
+
+### Q: 认证方式是 Lab 还是 Api？
+
+本指南统一使用 `Authorization: Lab <base64(ak:sk)>` 方式（`Lab` 是 Uni-Lab 平台的 auth scheme，**绝不能用 `Basic` 替代**）。如果用户有独立的 API Key，也可用 `Authorization: Api <key>` 替代。

.cursor/skills/submit-agent-result/scripts/prepare_agent_result.py

@@ -0,0 +1,133 @@
+"""
+读取实验结果文件（JSON / CSV），整合为 agent_result 请求体并可选提交。
+
+用法:
+    python prepare_agent_result.py \
+        --notebook-uuid <uuid> \
+        --files data1.json data2.csv \
+        [--auth <Lab token>] \
+        [--base <BASE_URL>] \
+        [--submit] \
+        [--output <output.json>]
+
+支持的输入文件格式:
+    - .json  → 直接作为 dict 合并
+    - .csv   → 转为 {"filename": [row_dict, ...]} 格式
+"""
+
+import argparse
+import base64
+import csv
+import json
+import os
+import sys
+from pathlib import Path
+from typing import Any, Dict, List
+
+
+def read_json_file(filepath: str) -> Dict[str, Any]:
+    with open(filepath, "r", encoding="utf-8") as f:
+        return json.load(f)
+
+
+def read_csv_file(filepath: str) -> List[Dict[str, Any]]:
+    rows = []
+    with open(filepath, "r", encoding="utf-8-sig") as f:
+        reader = csv.DictReader(f)
+        for row in reader:
+            converted = {}
+            for k, v in row.items():
+                try:
+                    converted[k] = int(v)
+                except (ValueError, TypeError):
+                    try:
+                        converted[k] = float(v)
+                    except (ValueError, TypeError):
+                        converted[k] = v
+            rows.append(converted)
+    return rows
+
+
+def merge_files(filepaths: List[str]) -> Dict[str, Any]:
+    """将多个文件合并为一个 agent_result dict"""
+    merged: Dict[str, Any] = {}
+    for fp in filepaths:
+        path = Path(fp)
+        ext = path.suffix.lower()
+        key = path.stem
+
+        if ext == ".json":
+            data = read_json_file(fp)
+            if isinstance(data, dict):
+                merged.update(data)
+            else:
+                merged[key] = data
+        elif ext == ".csv":
+            merged[key] = read_csv_file(fp)
+        else:
+            print(f"[警告] 不支持的文件格式: {fp}，跳过", file=sys.stderr)
+
+    return merged
+
+
+def build_request_body(notebook_uuid: str, agent_result: Dict[str, Any]) -> Dict[str, Any]:
+    return {
+        "notebook_uuid": notebook_uuid,
+        "agent_result": agent_result,
+    }
+
+
+def submit(base: str, auth: str, body: Dict[str, Any]) -> Dict[str, Any]:
+    try:
+        import requests
+    except ImportError:
+        print("[错误] 提交需要 requests 库: pip install requests", file=sys.stderr)
+        sys.exit(1)
+
+    url = f"{base}/api/v1/lab/notebook/agent-result"
+    headers = {
+        "Content-Type": "application/json",
+        "Authorization": f"Lab {auth}",
+    }
+    resp = requests.put(url, json=body, headers=headers, timeout=30)
+    return {"status_code": resp.status_code, "body": resp.json() if resp.headers.get("content-type", "").startswith("application/json") else resp.text}
+
+
+def main():
+    parser = argparse.ArgumentParser(description="整合实验结果文件并构建 agent_result 请求体")
+    parser.add_argument("--notebook-uuid", required=True, help="目标 notebook UUID")
+    parser.add_argument("--files", nargs="+", required=True, help="输入文件路径（JSON / CSV）")
+    parser.add_argument("--auth", help="Lab token（base64(ak:sk)）")
+    parser.add_argument("--base", help="API base URL")
+    parser.add_argument("--submit", action="store_true", help="直接提交到云端")
+    parser.add_argument("--output", default="agent_result_body.json", help="输出 JSON 文件路径")
+
+    args = parser.parse_args()
+
+    for fp in args.files:
+        if not os.path.exists(fp):
+            print(f"[错误] 文件不存在: {fp}", file=sys.stderr)
+            sys.exit(1)
+
+    agent_result = merge_files(args.files)
+    body = build_request_body(args.notebook_uuid, agent_result)
+
+    with open(args.output, "w", encoding="utf-8") as f:
+        json.dump(body, f, ensure_ascii=False, indent=2)
+    print(f"[完成] 请求体已保存: {args.output}")
+    print(f"  notebook_uuid: {args.notebook_uuid}")
+    print(f"  agent_result 字段数: {len(agent_result)}")
+    print(f"  合并文件数: {len(args.files)}")
+
+    if args.submit:
+        if not args.auth or not args.base:
+            print("[错误] 提交需要 --auth 和 --base 参数", file=sys.stderr)
+            sys.exit(1)
+        print(f"\n[提交] PUT {args.base}/api/v1/lab/notebook/agent-result ...")
+        result = submit(args.base, args.auth, body)
+        print(f"  HTTP {result['status_code']}")
+        print(f"  响应: {json.dumps(result['body'], ensure_ascii=False)}")
+
+
+if __name__ == "__main__":
+    main()

.cursor/skills/virtual-workbench/SKILL.md

@@ -0,0 +1,272 @@
+---
+name: virtual-workbench
+description: Operate Virtual Workbench via REST API — prepare materials, move to heating stations, start heating, move to output, transfer resources. Use when the user mentions virtual workbench, virtual_workbench, 虚拟工作台, heating stations, material processing, or workbench operations.
+---
+
+# Virtual Workbench API Skill
+
+## 设备信息
+
+- **device_id**: `virtual_workbench`
+- **Python 源码**: `unilabos/devices/virtual/workbench.py`
+- **设备类**: `VirtualWorkbench`
+- **动作数**: 6（`auto-prepare_materials`, `auto-move_to_heating_station`, `auto-start_heating`, `auto-move_to_output`, `transfer`, `manual_confirm`）
+- **设备描述**: 模拟工作台，包含 1 个机械臂（每次操作 2s，独占锁）和 3 个加热台（每次加热 60s，可并行）
+
+### 典型工作流程
+
+1. `prepare_materials` — 生成 A1-A5 物料（5 个 output handle）
+2. `move_to_heating_station` — 物料并发竞争机械臂，移动到空闲加热台
+3. `start_heating` — 启动加热（3 个加热台可并行）
+4. `move_to_output` — 加热完成后移到输出位置 Cn
+
+## 前置条件（缺一不可）
+
+使用本 skill 前，**必须**先确认以下信息。如果缺少任何一项，**立即向用户询问并终止**，等补齐后再继续。
+
+### 1. ak / sk → AUTH
+
+从启动参数 `--ak` `--sk` 或 config.py 中获取，生成 token：`base64(ak:sk)` → `Authorization: Lab <token>`
+
+### 2. --addr → BASE URL
+
+| `--addr` 值  | BASE                                |
+| ------------ | ----------------------------------- |
+| `test`       | `https://leap-lab.test.bohrium.com` |
+| `uat`        | `https://leap-lab.uat.bohrium.com`  |
+| `local`      | `http://127.0.0.1:48197`            |
+| 不传（默认） | `https://leap-lab.bohrium.com`      |
+
+确认后设置：
+
+```bash
+BASE="<根据 addr 确定的 URL>"
+AUTH="Authorization: Lab <token>"
+```
+
+**两项全部就绪后才可发起 API 请求。**
+
+## Session State
+
+- `lab_uuid` — 实验室 UUID（首次通过 API #1 自动获取，**不需要问用户**）
+- `device_name` — `virtual_workbench`
+
+## 请求约定
+
+所有请求使用 `curl -s`，POST/PATCH/DELETE 需加 `Content-Type: application/json`。
+
+> **Windows 平台**必须使用 `curl.exe`（而非 PowerShell 的 `curl` 别名）。
+
+---
+
+## API Endpoints
+
+### 1. 获取实验室信息（自动获取 lab_uuid）
+
+```bash
+curl -s -X GET "$BASE/api/v1/edge/lab/info" -H "$AUTH"
+```
+
+返回 `data.uuid` 为 `lab_uuid`，`data.name` 为 `lab_name`。
+
+### 2. 创建工作流
+
+```bash
+curl -s -X POST "$BASE/api/v1/lab/workflow/owner" \
+  -H "$AUTH" -H "Content-Type: application/json" \
+  -d '{"name":"<名称>","lab_uuid":"<lab_uuid>","description":"<描述>"}'
+```
+
+返回 `data.uuid` 为 `workflow_uuid`。创建成功后告知用户链接：`$BASE/laboratory/$lab_uuid/workflow/$workflow_uuid`
+
+### 3. 创建节点
+
+```bash
+curl -s -X POST "$BASE/api/v1/edge/workflow/node" \
+  -H "$AUTH" -H "Content-Type: application/json" \
+  -d '{"workflow_uuid":"<workflow_uuid>","resource_template_name":"virtual_workbench","node_template_name":"<action_name>"}'
+```
+
+- `resource_template_name` 固定为 `virtual_workbench`
+- `node_template_name` — action 名称（如 `auto-prepare_materials`, `auto-move_to_heating_station`）
+
+### 4. 删除节点
+
+```bash
+curl -s -X DELETE "$BASE/api/v1/lab/workflow/nodes" \
+  -H "$AUTH" -H "Content-Type: application/json" \
+  -d '{"node_uuids":["<uuid1>"],"workflow_uuid":"<workflow_uuid>"}'
+```
+
+### 5. 更新节点参数
+
+```bash
+curl -s -X PATCH "$BASE/api/v1/lab/workflow/node" \
+  -H "$AUTH" -H "Content-Type: application/json" \
+  -d '{"workflow_uuid":"<wf_uuid>","uuid":"<node_uuid>","param":{...}}'
+```
+
+参考 [action-index.md](action-index.md) 确定哪些字段是 Slot。
+
+### 6. 查询节点 handles
+
+```bash
+curl -s -X POST "$BASE/api/v1/lab/workflow/node-handles" \
+  -H "$AUTH" -H "Content-Type: application/json" \
+  -d '{"node_uuids":["<node_uuid_1>","<node_uuid_2>"]}'
+```
+
+### 7. 批量创建边
+
+```bash
+curl -s -X POST "$BASE/api/v1/lab/workflow/edges" \
+  -H "$AUTH" -H "Content-Type: application/json" \
+  -d '{"edges":[{"source_node_uuid":"<uuid>","target_node_uuid":"<uuid>","source_handle_uuid":"<uuid>","target_handle_uuid":"<uuid>"}]}'
+```
+
+### 8. 启动工作流
+
+```bash
+curl -s -X POST "$BASE/api/v1/lab/workflow/<workflow_uuid>/run" -H "$AUTH"
+```
+
+### 9. 运行设备单动作
+
+```bash
+curl -s -X POST "$BASE/api/v1/lab/mcp/run/action" \
+  -H "$AUTH" -H "Content-Type: application/json" \
+  -d '{"lab_uuid":"<lab_uuid>","device_id":"virtual_workbench","action":"<action_name>","action_type":"<type>","param":{...}}'
+```
+
+`param` 直接放 goal 里的属性，**不要**再包一层 `{"goal": {...}}`。
+
+> **WARNING: `action_type` 必须正确，传错会导致任务永远卡住无法完成。** 从下表或 `actions/<name>.json` 的 `type` 字段获取。
+
+#### action_type 速查表
+
+| action | action_type |
+|--------|-------------|
+| `auto-prepare_materials` | `UniLabJsonCommand` |
+| `auto-move_to_heating_station` | `UniLabJsonCommand` |
+| `auto-start_heating` | `UniLabJsonCommand` |
+| `auto-move_to_output` | `UniLabJsonCommand` |
+| `transfer` | `UniLabJsonCommandAsync` |
+| `manual_confirm` | `UniLabJsonCommand` |
+
+### 10. 查询任务状态
+
+```bash
+curl -s -X GET "$BASE/api/v1/lab/mcp/task/<task_uuid>" -H "$AUTH"
+```
+
+### 11. 运行工作流单节点
+
+```bash
+curl -s -X POST "$BASE/api/v1/lab/mcp/run/workflow/action" \
+  -H "$AUTH" -H "Content-Type: application/json" \
+  -d '{"node_uuid":"<node_uuid>"}'
+```
+
+### 12. 获取资源树（物料信息）
+
+```bash
+curl -s -X GET "$BASE/api/v1/lab/material/download/$lab_uuid" -H "$AUTH"
+```
+
+注意 `lab_uuid` 在路径中。返回 `data.nodes[]` 含所有节点（设备 + 物料），每个节点含 `name`、`uuid`、`type`、`parent`。
+
+### 13. 获取工作流模板详情
+
+```bash
+curl -s -X GET "$BASE/api/v1/lab/workflow/template/detail/$workflow_uuid" -H "$AUTH"
+```
+
+> 必须使用 `/lab/workflow/template/detail/{uuid}`，其他路径会返回 404。
+
+### 14. 按名称查询物料模板
+
+```bash
+curl -s -X GET "$BASE/api/v1/lab/material/template/by-name?lab_uuid=$lab_uuid&name=<template_name>" -H "$AUTH"
+```
+
+返回 `data.uuid` 为 `res_template_uuid`，用于 API #15。
+
+### 15. 创建物料节点
+
+```bash
+curl -s -X POST "$BASE/api/v1/edge/material/node" \
+  -H "$AUTH" -H "Content-Type: application/json" \
+  -d '{"res_template_uuid":"<uuid>","name":"<名称>","display_name":"<显示名>","parent_uuid":"<父节点uuid>","data":{...}}'
+```
+
+### 16. 更新物料节点
+
+```bash
+curl -s -X PUT "$BASE/api/v1/edge/material/node" \
+  -H "$AUTH" -H "Content-Type: application/json" \
+  -d '{"uuid":"<节点uuid>","display_name":"<新名称>","data":{...}}'
+```
+
+---
+
+## Placeholder Slot 填写规则
+
+| `placeholder_keys` 值 | Slot 类型    | 填写格式                                              | 选取范围               |
+| --------------------- | ------------ | ----------------------------------------------------- | ---------------------- |
+| `unilabos_resources`  | ResourceSlot | `{"id": "/path/name", "name": "name", "uuid": "xxx"}` | 仅物料节点（非设备）   |
+| `unilabos_devices`    | DeviceSlot   | `"/parent/device_name"`                               | 仅设备节点（type=device） |
+| `unilabos_nodes`      | NodeSlot     | `"/parent/node_name"`                                 | 所有节点（设备 + 物料）   |
+| `unilabos_class`      | ClassSlot    | `"class_name"`                                        | 注册表中已注册的资源类    |
+
+### virtual_workbench 设备的 Slot 字段表
+
+| Action            | 字段             | Slot 类型    | 说明                 |
+| ----------------- | ---------------- | ------------ | -------------------- |
+| `transfer`        | `resource`       | ResourceSlot | 待转移物料数组       |
+| `transfer`        | `target_device`  | DeviceSlot   | 目标设备路径         |
+| `transfer`        | `mount_resource` | ResourceSlot | 目标孔位数组         |
+| `manual_confirm`  | `resource`       | ResourceSlot | 确认用物料数组       |
+| `manual_confirm`  | `target_device`  | DeviceSlot   | 确认用目标设备       |
+| `manual_confirm`  | `mount_resource` | ResourceSlot | 确认用目标孔位数组   |
+
+> `prepare_materials`、`move_to_heating_station`、`start_heating`、`move_to_output` 这 4 个动作**无 Slot 字段**，参数为纯数值/整数。
+
+---
+
+## 渐进加载策略
+
+1. **SKILL.md**（本文件）— API 端点 + session state 管理 + 设备工作流概览
+2. **[action-index.md](action-index.md)** — 按分类浏览 6 个动作的描述和核心参数
+3. **[actions/\<name\>.json](actions/)** — 仅在需要构建具体请求时，加载对应 action 的完整 JSON Schema
+
+---
+
+## 完整工作流 Checklist
+
+```
+Task Progress:
+- [ ] Step 1: GET /edge/lab/info 获取 lab_uuid
+- [ ] Step 2: 获取资源树 (GET #12) → 记住可用物料
+- [ ] Step 3: 读 action-index.md 确定要用的 action 名
+- [ ] Step 4: 创建工作流 (POST #2) → 记住 workflow_uuid，告知用户链接
+- [ ] Step 5: 创建节点 (POST #3, resource_template_name=virtual_workbench) → 记住 node_uuid + data.param
+- [ ] Step 6: 根据 _unilabos_placeholder_info 和资源树，填写 data.param 中的 Slot 字段
+- [ ] Step 7: 更新节点参数 (PATCH #5)
+- [ ] Step 8: 查询节点 handles (POST #6) → 获取各节点的 handle_uuid
+- [ ] Step 9: 批量创建边 (POST #7) → 用 handle_uuid 连接节点
+- [ ] Step 10: 启动工作流 (POST #8) 或运行单节点 (POST #11)
+- [ ] Step 11: 查询任务状态 (GET #10) 确认完成
+```
+
+### 典型 5 物料并发加热工作流示例
+
+```
+prepare_materials (count=5)
+  ├─ channel_1 → move_to_heating_station (material_number=1) → start_heating → move_to_output
+  ├─ channel_2 → move_to_heating_station (material_number=2) → start_heating → move_to_output
+  ├─ channel_3 → move_to_heating_station (material_number=3) → start_heating → move_to_output
+  ├─ channel_4 → move_to_heating_station (material_number=4) → start_heating → move_to_output
+  └─ channel_5 → move_to_heating_station (material_number=5) → start_heating → move_to_output
+```
+
+创建节点时，`prepare_materials` 的 5 个 output handle（`channel_1` ~ `channel_5`）分别连接到 5 个 `move_to_heating_station` 节点的 `material_input` handle。每个 `move_to_heating_station` 的 `heating_station_output` 和 `material_number_output` 连接到对应 `start_heating` 的 `station_id_input` 和 `material_number_input`。

.cursor/skills/virtual-workbench/action-index.md

@@ -0,0 +1,76 @@
+# Action Index — virtual_workbench
+
+6 个动作，按功能分类。每个动作的完整 JSON Schema 在 `actions/<name>.json`。
+
+---
+
+## 物料准备
+
+### `auto-prepare_materials`
+
+批量准备物料（虚拟起始节点），生成 A1-A5 物料编号，输出 5 个 handle 供后续节点使用
+
+- **action_type**: `UniLabJsonCommand`
+- **Schema**: [`actions/prepare_materials.json`](actions/prepare_materials.json)
+- **可选参数**: `count`（物料数量，默认 5）
+
+---
+
+## 机械臂 & 加热台操作
+
+### `auto-move_to_heating_station`
+
+将物料从 An 位置移动到空闲加热台（竞争机械臂，自动查找空闲加热台）
+
+- **action_type**: `UniLabJsonCommand`
+- **Schema**: [`actions/move_to_heating_station.json`](actions/move_to_heating_station.json)
+- **核心参数**: `material_number`（物料编号，integer）
+
+### `auto-start_heating`
+
+启动指定加热台的加热程序（可并行，3 个加热台同时工作）
+
+- **action_type**: `UniLabJsonCommand`
+- **Schema**: [`actions/start_heating.json`](actions/start_heating.json)
+- **核心参数**: `station_id`（加热台 ID），`material_number`（物料编号）
+
+### `auto-move_to_output`
+
+将加热完成的物料从加热台移动到输出位置 Cn
+
+- **action_type**: `UniLabJsonCommand`
+- **Schema**: [`actions/move_to_output.json`](actions/move_to_output.json)
+- **核心参数**: `station_id`（加热台 ID），`material_number`（物料编号）
+
+---
+
+## 物料转移
+
+### `transfer`
+
+异步转移物料到目标设备（通过 ROS 资源转移）
+
+- **action_type**: `UniLabJsonCommandAsync`
+- **Schema**: [`actions/transfer.json`](actions/transfer.json)
+- **核心参数**: `resource`, `target_device`, `mount_resource`
+- **占位符字段**:
+  - `resource` — **ResourceSlot**，待转移的物料数组 `[{id, name, uuid}, ...]`
+  - `target_device` — **DeviceSlot**，目标设备路径字符串
+  - `mount_resource` — **ResourceSlot**，目标孔位数组 `[{id, name, uuid}, ...]`
+
+---
+
+## 人工确认
+
+### `manual_confirm`
+
+创建人工确认节点，等待用户手动确认后继续（含物料转移上下文）
+
+- **action_type**: `UniLabJsonCommand`
+- **Schema**: [`actions/manual_confirm.json`](actions/manual_confirm.json)
+- **核心参数**: `resource`, `target_device`, `mount_resource`, `timeout_seconds`, `assignee_user_ids`
+- **占位符字段**:
+  - `resource` — **ResourceSlot**，物料数组
+  - `target_device` — **DeviceSlot**，目标设备路径
+  - `mount_resource` — **ResourceSlot**，目标孔位数组
+  - `assignee_user_ids` — `unilabos_manual_confirm` 类型

.cursor/skills/virtual-workbench/actions/manual_confirm.json

@@ -0,0 +1,270 @@
+{
+  "type": "UniLabJsonCommand",
+  "goal": {
+    "resource": "resource",
+    "target_device": "target_device",
+    "mount_resource": "mount_resource",
+    "timeout_seconds": "timeout_seconds",
+    "assignee_user_ids": "assignee_user_ids"
+  },
+  "schema": {
+    "type": "object",
+    "properties": {
+      "resource": {
+        "items": {
+          "type": "object",
+          "additionalProperties": false,
+          "properties": {
+            "id": {
+              "type": "string"
+            },
+            "name": {
+              "type": "string"
+            },
+            "sample_id": {
+              "type": "string"
+            },
+            "children": {
+              "type": "array",
+              "items": {
+                "type": "string"
+              }
+            },
+            "parent": {
+              "type": "string"
+            },
+            "type": {
+              "type": "string"
+            },
+            "category": {
+              "type": "string"
+            },
+            "pose": {
+              "type": "object",
+              "properties": {
+                "position": {
+                  "type": "object",
+                  "properties": {
+                    "x": {
+                      "type": "number",
+                      "minimum": -1.7976931348623157e+308,
+                      "maximum": 1.7976931348623157e+308
+                    },
+                    "y": {
+                      "type": "number",
+                      "minimum": -1.7976931348623157e+308,
+                      "maximum": 1.7976931348623157e+308
+                    },
+                    "z": {
+                      "type": "number",
+                      "minimum": -1.7976931348623157e+308,
+                      "maximum": 1.7976931348623157e+308
+                    }
+                  },
+                  "required": [
+                    "x",
+                    "y",
+                    "z"
+                  ],
+                  "title": "position",
+                  "additionalProperties": false
+                },
+                "orientation": {
+                  "type": "object",
+                  "properties": {
+                    "x": {
+                      "type": "number",
+                      "minimum": -1.7976931348623157e+308,
+                      "maximum": 1.7976931348623157e+308
+                    },
+                    "y": {
+                      "type": "number",
+                      "minimum": -1.7976931348623157e+308,
+                      "maximum": 1.7976931348623157e+308
+                    },
+                    "z": {
+                      "type": "number",
+                      "minimum": -1.7976931348623157e+308,
+                      "maximum": 1.7976931348623157e+308
+                    },
+                    "w": {
+                      "type": "number",
+                      "minimum": -1.7976931348623157e+308,
+                      "maximum": 1.7976931348623157e+308
+                    }
+                  },
+                  "required": [
+                    "x",
+                    "y",
+                    "z",
+                    "w"
+                  ],
+                  "title": "orientation",
+                  "additionalProperties": false
+                }
+              },
+              "required": [
+                "position",
+                "orientation"
+              ],
+              "title": "pose",
+              "additionalProperties": false
+            },
+            "config": {
+              "type": "string"
+            },
+            "data": {
+              "type": "string"
+            }
+          },
+          "title": "resource"
+        },
+        "type": "array"
+      },
+      "target_device": {
+        "type": "string",
+        "description": "device reference"
+      },
+      "mount_resource": {
+        "items": {
+          "type": "object",
+          "additionalProperties": false,
+          "properties": {
+            "id": {
+              "type": "string"
+            },
+            "name": {
+              "type": "string"
+            },
+            "sample_id": {
+              "type": "string"
+            },
+            "children": {
+              "type": "array",
+              "items": {
+                "type": "string"
+              }
+            },
+            "parent": {
+              "type": "string"
+            },
+            "type": {
+              "type": "string"
+            },
+            "category": {
+              "type": "string"
+            },
+            "pose": {
+              "type": "object",
+              "properties": {
+                "position": {
+                  "type": "object",
+                  "properties": {
+                    "x": {
+                      "type": "number",
+                      "minimum": -1.7976931348623157e+308,
+                      "maximum": 1.7976931348623157e+308
+                    },
+                    "y": {
+                      "type": "number",
+                      "minimum": -1.7976931348623157e+308,
+                      "maximum": 1.7976931348623157e+308
+                    },
+                    "z": {
+                      "type": "number",
+                      "minimum": -1.7976931348623157e+308,
+                      "maximum": 1.7976931348623157e+308
+                    }
+                  },
+                  "required": [
+                    "x",
+                    "y",
+                    "z"
+                  ],
+                  "title": "position",
+                  "additionalProperties": false
+                },
+                "orientation": {
+                  "type": "object",
+                  "properties": {
+                    "x": {
+                      "type": "number",
+                      "minimum": -1.7976931348623157e+308,
+                      "maximum": 1.7976931348623157e+308
+                    },
+                    "y": {
+                      "type": "number",
+                      "minimum": -1.7976931348623157e+308,
+                      "maximum": 1.7976931348623157e+308
+                    },
+                    "z": {
+                      "type": "number",
+                      "minimum": -1.7976931348623157e+308,
+                      "maximum": 1.7976931348623157e+308
+                    },
+                    "w": {
+                      "type": "number",
+                      "minimum": -1.7976931348623157e+308,
+                      "maximum": 1.7976931348623157e+308
+                    }
+                  },
+                  "required": [
+                    "x",
+                    "y",
+                    "z",
+                    "w"
+                  ],
+                  "title": "orientation",
+                  "additionalProperties": false
+                }
+              },
+              "required": [
+                "position",
+                "orientation"
+              ],
+              "title": "pose",
+              "additionalProperties": false
+            },
+            "config": {
+              "type": "string"
+            },
+            "data": {
+              "type": "string"
+            }
+          },
+          "title": "mount_resource"
+        },
+        "type": "array"
+      },
+      "timeout_seconds": {
+        "type": "integer"
+      },
+      "assignee_user_ids": {
+        "type": "array",
+        "items": {
+          "type": "string"
+        }
+      }
+    },
+    "required": [
+      "resource",
+      "target_device",
+      "mount_resource",
+      "timeout_seconds",
+      "assignee_user_ids"
+    ],
+    "_unilabos_placeholder_info": {
+      "resource": "unilabos_resources",
+      "target_device": "unilabos_devices",
+      "mount_resource": "unilabos_resources",
+      "assignee_user_ids": "unilabos_manual_confirm"
+    }
+  },
+  "goal_default": {},
+  "placeholder_keys": {
+    "resource": "unilabos_resources",
+    "target_device": "unilabos_devices",
+    "mount_resource": "unilabos_resources",
+    "assignee_user_ids": "unilabos_manual_confirm"
+  }
+}

.cursor/skills/virtual-workbench/actions/move_to_heating_station.json

@@ -0,0 +1,19 @@
+{
+  "type": "UniLabJsonCommand",
+  "goal": {
+    "material_number": "material_number"
+  },
+  "schema": {
+    "type": "object",
+    "properties": {
+      "material_number": {
+        "type": "integer"
+      }
+    },
+    "required": [
+      "material_number"
+    ]
+  },
+  "goal_default": {},
+  "placeholder_keys": {}
+}

.cursor/skills/virtual-workbench/actions/move_to_output.json

@@ -0,0 +1,24 @@
+{
+  "type": "UniLabJsonCommand",
+  "goal": {
+    "station_id": "station_id",
+    "material_number": "material_number"
+  },
+  "schema": {
+    "type": "object",
+    "properties": {
+      "station_id": {
+        "type": "integer"
+      },
+      "material_number": {
+        "type": "integer"
+      }
+    },
+    "required": [
+      "station_id",
+      "material_number"
+    ]
+  },
+  "goal_default": {},
+  "placeholder_keys": {}
+}

.cursor/skills/virtual-workbench/actions/prepare_materials.json

@@ -0,0 +1,20 @@
+{
+  "type": "UniLabJsonCommand",
+  "goal": {
+    "count": "count"
+  },
+  "schema": {
+    "type": "object",
+    "properties": {
+      "count": {
+        "type": "integer",
+        "default": 5
+      }
+    },
+    "required": []
+  },
+  "goal_default": {
+    "count": 5
+  },
+  "placeholder_keys": {}
+}

.cursor/skills/virtual-workbench/actions/start_heating.json

@@ -0,0 +1,24 @@
+{
+  "type": "UniLabJsonCommand",
+  "goal": {
+    "station_id": "station_id",
+    "material_number": "material_number"
+  },
+  "schema": {
+    "type": "object",
+    "properties": {
+      "station_id": {
+        "type": "integer"
+      },
+      "material_number": {
+        "type": "integer"
+      }
+    },
+    "required": [
+      "station_id",
+      "material_number"
+    ]
+  },
+  "goal_default": {},
+  "placeholder_keys": {}
+}

.cursor/skills/virtual-workbench/actions/transfer.json

@@ -0,0 +1,255 @@
+{
+  "type": "UniLabJsonCommandAsync",
+  "goal": {
+    "resource": "resource",
+    "target_device": "target_device",
+    "mount_resource": "mount_resource"
+  },
+  "schema": {
+    "type": "object",
+    "properties": {
+      "resource": {
+        "items": {
+          "type": "object",
+          "additionalProperties": false,
+          "properties": {
+            "id": {
+              "type": "string"
+            },
+            "name": {
+              "type": "string"
+            },
+            "sample_id": {
+              "type": "string"
+            },
+            "children": {
+              "type": "array",
+              "items": {
+                "type": "string"
+              }
+            },
+            "parent": {
+              "type": "string"
+            },
+            "type": {
+              "type": "string"
+            },
+            "category": {
+              "type": "string"
+            },
+            "pose": {
+              "type": "object",
+              "properties": {
+                "position": {
+                  "type": "object",
+                  "properties": {
+                    "x": {
+                      "type": "number",
+                      "minimum": -1.7976931348623157e+308,
+                      "maximum": 1.7976931348623157e+308
+                    },
+                    "y": {
+                      "type": "number",
+                      "minimum": -1.7976931348623157e+308,
+                      "maximum": 1.7976931348623157e+308
+                    },
+                    "z": {
+                      "type": "number",
+                      "minimum": -1.7976931348623157e+308,
+                      "maximum": 1.7976931348623157e+308
+                    }
+                  },
+                  "required": [
+                    "x",
+                    "y",
+                    "z"
+                  ],
+                  "title": "position",
+                  "additionalProperties": false
+                },
+                "orientation": {
+                  "type": "object",
+                  "properties": {
+                    "x": {
+                      "type": "number",
+                      "minimum": -1.7976931348623157e+308,
+                      "maximum": 1.7976931348623157e+308
+                    },
+                    "y": {
+                      "type": "number",
+                      "minimum": -1.7976931348623157e+308,
+                      "maximum": 1.7976931348623157e+308
+                    },
+                    "z": {
+                      "type": "number",
+                      "minimum": -1.7976931348623157e+308,
+                      "maximum": 1.7976931348623157e+308
+                    },
+                    "w": {
+                      "type": "number",
+                      "minimum": -1.7976931348623157e+308,
+                      "maximum": 1.7976931348623157e+308
+                    }
+                  },
+                  "required": [
+                    "x",
+                    "y",
+                    "z",
+                    "w"
+                  ],
+                  "title": "orientation",
+                  "additionalProperties": false
+                }
+              },
+              "required": [
+                "position",
+                "orientation"
+              ],
+              "title": "pose",
+              "additionalProperties": false
+            },
+            "config": {
+              "type": "string"
+            },
+            "data": {
+              "type": "string"
+            }
+          },
+          "title": "resource"
+        },
+        "type": "array"
+      },
+      "target_device": {
+        "type": "string",
+        "description": "device reference"
+      },
+      "mount_resource": {
+        "items": {
+          "type": "object",
+          "additionalProperties": false,
+          "properties": {
+            "id": {
+              "type": "string"
+            },
+            "name": {
+              "type": "string"
+            },
+            "sample_id": {
+              "type": "string"
+            },
+            "children": {
+              "type": "array",
+              "items": {
+                "type": "string"
+              }
+            },
+            "parent": {
+              "type": "string"
+            },
+            "type": {
+              "type": "string"
+            },
+            "category": {
+              "type": "string"
+            },
+            "pose": {
+              "type": "object",
+              "properties": {
+                "position": {
+                  "type": "object",
+                  "properties": {
+                    "x": {
+                      "type": "number",
+                      "minimum": -1.7976931348623157e+308,
+                      "maximum": 1.7976931348623157e+308
+                    },
+                    "y": {
+                      "type": "number",
+                      "minimum": -1.7976931348623157e+308,
+                      "maximum": 1.7976931348623157e+308
+                    },
+                    "z": {
+                      "type": "number",
+                      "minimum": -1.7976931348623157e+308,
+                      "maximum": 1.7976931348623157e+308
+                    }
+                  },
+                  "required": [
+                    "x",
+                    "y",
+                    "z"
+                  ],
+                  "title": "position",
+                  "additionalProperties": false
+                },
+                "orientation": {
+                  "type": "object",
+                  "properties": {
+                    "x": {
+                      "type": "number",
+                      "minimum": -1.7976931348623157e+308,
+                      "maximum": 1.7976931348623157e+308
+                    },
+                    "y": {
+                      "type": "number",
+                      "minimum": -1.7976931348623157e+308,
+                      "maximum": 1.7976931348623157e+308
+                    },
+                    "z": {
+                      "type": "number",
+                      "minimum": -1.7976931348623157e+308,
+                      "maximum": 1.7976931348623157e+308
+                    },
+                    "w": {
+                      "type": "number",
+                      "minimum": -1.7976931348623157e+308,
+                      "maximum": 1.7976931348623157e+308
+                    }
+                  },
+                  "required": [
+                    "x",
+                    "y",
+                    "z",
+                    "w"
+                  ],
+                  "title": "orientation",
+                  "additionalProperties": false
+                }
+              },
+              "required": [
+                "position",
+                "orientation"
+              ],
+              "title": "pose",
+              "additionalProperties": false
+            },
+            "config": {
+              "type": "string"
+            },
+            "data": {
+              "type": "string"
+            }
+          },
+          "title": "mount_resource"
+        },
+        "type": "array"
+      }
+    },
+    "required": [
+      "resource",
+      "target_device",
+      "mount_resource"
+    ],
+    "_unilabos_placeholder_info": {
+      "resource": "unilabos_resources",
+      "target_device": "unilabos_devices",
+      "mount_resource": "unilabos_resources"
+    }
+  },
+  "goal_default": {},
+  "placeholder_keys": {
+    "resource": "unilabos_resources",
+    "target_device": "unilabos_devices",
+    "mount_resource": "unilabos_resources"
+  }
+}

.cursorignore

@@ -1,26 +1,188 @@
-.conda
-# .github
-.idea
-# .vscode
-output
-pylabrobot_repo
-recipes
-scripts
-service
-temp
-# unilabos/test
-# unilabos/app/web
-unilabos/device_mesh
-unilabos_data
-unilabos_msgs
-unilabos.egg-info
-CONTRIBUTORS
-# LICENSE
-MANIFEST.in
+# ============================================================
+# Uni-Lab-OS Cursor Ignore 配置，控制 Cursor AI 的文件索引范围
+# ============================================================
+
+# ==================== 敏感配置文件 ====================
+# 本地配置（可能包含密钥）
+**/local_config.py
+test_config.py
+local_test*.py
+
+# 环境变量和密钥
+.env
+.env.*
+**/.certs/
+*.pem
+*.key
+credentials.json
+secrets.yaml
+
+# ==================== 二进制和 3D 模型文件 ====================
+# 3D 模型文件（无需索引）
+*.stl
+*.dae
+*.glb
+*.gltf
+*.obj
+*.fbx
+*.blend
+
+# URDF/Xacro 机器人描述文件（大型XML）
+*.xacro
+
+# 图片文件
+*.png
+*.jpg
+*.jpeg
+*.gif
+*.webp
+*.ico
+*.svg
+*.bmp
+
+# 压缩包
+*.zip
+*.tar
+*.tar.gz
+*.tgz
+*.bz2
+*.rar
+*.7z
+
+# ==================== Python 生成文件 ====================
+__pycache__/
+*.py[cod]
+*$py.class
+*.so
+*.pyd
+*.egg
+*.egg-info/
+.eggs/
+dist/
+build/
+*.manifest
+*.spec
+
+# ==================== IDE 和编辑器 ====================
+.idea/
+.vscode/
+*.swp
+*.swo
+*~
+.#*
+
+# ==================== 测试和覆盖率 ====================
+.pytest_cache/
+.coverage
+.coverage.*
+htmlcov/
+.tox/
+.nox/
+coverage.xml
+*.cover
+
+# ==================== 虚拟环境 ====================
+.venv/
+venv/
+env/
+ENV/
+
+# ==================== ROS 2 生成文件 ====================
+# ROS 构建目录
+build/
+install/
+log/
+logs/
+devel/
+
+# ROS 消息生成
+msg_gen/
+srv_gen/
+msg/*Action.msg
+msg/*ActionFeedback.msg
+msg/*ActionGoal.msg
+msg/*ActionResult.msg
+msg/*Feedback.msg
+msg/*Goal.msg
+msg/*Result.msg
+msg/_*.py
+srv/_*.py
+build_isolated/
+devel_isolated/
+
+# ROS 动态配置
+*.cfgc
+/cfg/cpp/
+/cfg/*.py
+
+# ==================== 项目特定目录 ====================
+# 工作数据目录
+unilabos_data/
+
+# 临时和输出目录
+temp/
+output/
+cursor_docs/
+configs/
+
+# 文档构建
+docs/_build/
+/site
+
+# ==================== 大型数据文件 ====================
+# 点云数据
+*.pcd
+
+# GraphML 图形文件
+*.graphml
+
+# 日志文件
+*.log
+
+# 数据库
+*.sqlite3
+*.db
+
+# Jupyter 检查点
+.ipynb_checkpoints/
+
+# ==================== 设备网格资源 ====================
+# 3D 网格文件目录（包含大量 STL/DAE 文件）
+unilabos/device_mesh/devices/**/*.stl
+unilabos/device_mesh/devices/**/*.dae
+unilabos/device_mesh/resources/**/*.stl
+unilabos/device_mesh/resources/**/*.glb
+unilabos/device_mesh/resources/**/*.xacro
+
+# RViz 配置
+*.rviz
+
+# ==================== 系统文件 ====================
+.DS_Store
+Thumbs.db
+desktop.ini
+
+# ==================== 锁文件 ====================
+poetry.lock
+Pipfile.lock
+pdm.lock
+package-lock.json
+yarn.lock
+
+# ==================== 类型检查缓存 ====================
+.mypy_cache/
+.dmypy.json
+.pytype/
+.pyre/
 pyrightconfig.json
-# README.md
-# README_zh.md
-setup.py
-setup.cfg
-.gitattrubutes
-**/__pycache__
+
+# ==================== 其他 ====================
+# Catkin
+CATKIN_IGNORE
+
+# Eclipse/Qt
+.project
+.cproject
+CMakeLists.txt.user
+*.user
+qtcreator-*

.github/copilot-instructions.md

@@ -0,0 +1,11 @@
+## 设备接入
+
+当被要求添加设备驱动时，参考 `docs/ai_guides/add_device.md`。
+该指南包含完整的模板和已有设备接口参考。
+
+## 关键规则
+
+- 动作方法的参数名是接口契约，不可重命名
+- `status` 字符串必须与同类已有设备一致
+- `self.data` 必须在 `__init__` 中预填充所有属性字段
+- 异步方法中使用 `await self._ros_node.sleep()`，禁止 `time.sleep()`

.github/dependabot.yml

@@ -0,0 +1,19 @@
+version: 2
+updates:
+# GitHub Actions
+- package-ecosystem: "github-actions"
+  directory: "/"
+  target-branch: "dev"
+  schedule:
+    interval: "weekly"
+    day: "monday"
+    time: "06:00"
+  open-pull-requests-limit: 5
+  reviewers:
+  - "msgcenterpy-team"
+  labels:
+  - "dependencies"
+  - "github-actions"
+  commit-message:
+    prefix: "ci"
+    include: "scope"

.github/workflows/ci-check.yml

@@ -49,7 +49,7 @@ jobs:
           uv pip uninstall enum34 || echo enum34 not installed, skipping
           uv pip install .
 
-      - name: Run check mode (complete_registry)
+      - name: Run check mode (AST registry validation)
         run: |
           call conda activate check-env
           echo Running check mode...

.gitignore

@@ -4,6 +4,8 @@ temp/
 output/
 unilabos_data/
 pyrightconfig.json
+.cursorignore
+device_package*/
 ## Python
 
 # Byte-compiled / optimized / DLL files
@@ -250,4 +252,3 @@ ros-humble-unilabos-msgs-0.9.13-h6403a04_5.tar.bz2
 test_config.py
 
 
-/.claude

AGENTS.md

@@ -0,0 +1,87 @@
+# AGENTS.md
+
+This file provides guidance to Claude Code (claude.ai/code) when working with code in this repository.
+
+Also follow the monorepo-level rules in `../AGENTS.md`.
+
+## Build & Development
+
+```bash
+# Install in editable mode (requires mamba env with python 3.11)
+pip install -e .
+uv pip install -r unilabos/utils/requirements.txt
+
+# Run with a device graph
+unilab --graph <graph.json> --config <config.py> --backend ros
+unilab --graph <graph.json> --config <config.py> --backend simple  # no ROS2 needed
+
+# Common CLI flags
+unilab --app_bridges websocket fastapi    # communication bridges
+unilab --test_mode                        # simulate hardware, no real execution
+unilab --check_mode                       # CI validation of registry imports
+unilab --skip_env_check                   # skip auto-install of dependencies
+unilab --visual rviz|web|disable          # visualization mode
+unilab --is_slave                         # run as slave node
+
+# Workflow upload subcommand
+unilab workflow_upload -f <workflow.json> -n <name> --tags tag1 tag2
+
+# Tests
+pytest tests/                              # all tests
+pytest tests/resources/test_resourcetreeset.py  # single test file
+pytest tests/resources/test_resourcetreeset.py::TestClassName::test_method  # single test
+```
+
+## Architecture
+
+### Startup Flow
+
+`unilab` CLI → `unilabos/app/main.py:main()` → loads config → builds registry → reads device graph (JSON/GraphML) → starts backend thread (ROS2/simple) → starts FastAPI web server + WebSocket client.
+
+### Core Layers
+
+**Registry** (`unilabos/registry/`): Singleton `Registry` class discovers and catalogs all device types, resource types, and communication devices from YAML definitions. Device types live in `registry/devices/*.yaml`, resources in `registry/resources/`, comms in `registry/device_comms/`. The registry resolves class paths to actual Python classes via `utils/import_manager.py`.
+
+**Resource Tracking** (`unilabos/resources/resource_tracker.py`): Pydantic-based `ResourceDict` → `ResourceDictInstance` → `ResourceTreeSet` hierarchy. `ResourceTreeSet` is the canonical in-memory representation of all devices and resources, used throughout the system. Graph I/O is in `resources/graphio.py` (reads JSON/GraphML device topology files into `nx.Graph` + `ResourceTreeSet`).
+
+**Device Drivers** (`unilabos/devices/`): 30+ hardware drivers organized by device type (liquid_handling, hplc, balance, arm, etc.). Each driver is a Python class that gets wrapped by `ros/device_node_wrapper.py:ros2_device_node()` to become a ROS2 node with publishers, subscribers, and action servers.
+
+**ROS2 Layer** (`unilabos/ros/`): `device_node_wrapper.py` dynamically wraps any device class into `ROS2DeviceNode` (defined in `ros/nodes/base_device_node.py`). Preset node types in `ros/nodes/presets/` include `host_node`, `controller_node`, `workstation`, `serial_node`, `camera`. Messages use custom `unilabos_msgs` (pre-built, distributed via releases).
+
+**Protocol Compilation** (`unilabos/compile/`): 20+ protocol compilers (add, centrifuge, dissolve, filter, heatchill, stir, pump, etc.) that transform YAML protocol definitions into executable sequences.
+
+**Communication** (`unilabos/device_comms/`): Hardware communication adapters — OPC-UA client, Modbus PLC, RPC, and a universal driver. `app/communication.py` provides a factory pattern for WebSocket client connections to the cloud.
+
+**Web/API** (`unilabos/app/web/`): FastAPI server with REST API (`api.py`), Jinja2 template pages (`pages.py`), and HTTP client for cloud communication (`client.py`). Runs on port 8002 by default.
+
+### Configuration System
+
+- **Config classes** in `unilabos/config/config.py`: `BasicConfig`, `WSConfig`, `HTTPConfig`, `ROSConfig` — all class-level attributes, loaded from Python config files
+- Config files are `.py` files with matching class names (see `config/example_config.py`)
+- Environment variables override with prefix `UNILABOS_` (e.g., `UNILABOS_BASICCONFIG_PORT=9000`)
+- Device topology defined in graph files (JSON with node-link format, or GraphML)
+
+### Key Data Flow
+
+1. Graph file → `graphio.read_node_link_json()` → `(nx.Graph, ResourceTreeSet, resource_links)`
+2. `ResourceTreeSet` + `Registry` → `initialize_device.initialize_device_from_dict()` → `ROS2DeviceNode` instances
+3. Device nodes communicate via ROS2 topics/actions or direct Python calls (simple backend)
+4. Cloud sync via WebSocket (`app/ws_client.py`) and HTTP (`app/web/client.py`)
+
+### Test Data
+
+Example device graphs and experiment configs are in `unilabos/test/experiments/` (not `tests/`). Registry test fixtures in `unilabos/test/registry/`.
+
+## Code Conventions
+
+- Code comments and log messages in simplified Chinese
+- Python 3.11+, type hints expected
+- Pydantic models for data validation (`resource_tracker.py`)
+- Singleton pattern via `@singleton` decorator (`utils/decorator.py`)
+- Dynamic class loading via `utils/import_manager.py` — device classes resolved at runtime from registry YAML paths
+- CLI argument dashes auto-converted to underscores for consistency
+
+## Licensing
+
+- Framework code: GPL-3.0
+- Device drivers (`unilabos/devices/`): DP Technology Proprietary License — do not redistribute

CLAUDE.md

@@ -0,0 +1,4 @@
+
+Please follow the rules defined in:
+
+@AGENTS.md

docs/advanced_usage/configuration.md

@@ -12,7 +12,7 @@ Uni-Lab 使用 Python 格式的配置文件（`.py`），默认为 `unilabos_dat
 
 **获取方式：**
 
-进入 [Uni-Lab 实验室](https://uni-lab.bohrium.com)，点击左下角的头像，在实验室详情中获取所在实验室的 ak 和 sk：
+进入 [Uni-Lab 实验室](https://leap-lab.bohrium.com)，点击左下角的头像，在实验室详情中获取所在实验室的 ak 和 sk：
 
 ![copy_aksk.gif](image/copy_aksk.gif)
 
@@ -69,7 +69,7 @@ class WSConfig:
 
 # HTTP配置
 class HTTPConfig:
-    remote_addr = "https://uni-lab.bohrium.com/api/v1"  # 远程服务器地址
+    remote_addr = "https://leap-lab.bohrium.com/api/v1"  # 远程服务器地址
 
 # ROS配置
 class ROSConfig:
@@ -209,8 +209,8 @@ unilab --ak "key" --sk "secret" --addr "test" --upload_registry --2d_vis -g grap
 
 `--addr` 参数支持以下预设值，会自动转换为对应的完整 URL：
 
-- `test` → `https://uni-lab.test.bohrium.com/api/v1`
-- `uat` → `https://uni-lab.uat.bohrium.com/api/v1`
+- `test` → `https://leap-lab.test.bohrium.com/api/v1`
+- `uat` → `https://leap-lab.uat.bohrium.com/api/v1`
 - `local` → `http://127.0.0.1:48197/api/v1`
 - 其他值 → 直接使用作为完整 URL
 
@@ -248,7 +248,7 @@ unilab --ak "key" --sk "secret" --addr "test" --upload_registry --2d_vis -g grap
 
 `ak` 和 `sk` 是必需的认证参数：
 
-1. **获取方式**：在 [Uni-Lab 官网](https://uni-lab.bohrium.com) 注册实验室后获得
+1. **获取方式**：在 [Uni-Lab 官网](https://leap-lab.bohrium.com) 注册实验室后获得
 2. **配置方式**：
    - **命令行参数**：`--ak "your_key" --sk "your_secret"`（最高优先级，推荐）
    - **环境变量**：`UNILABOS_BASICCONFIG_AK` 和 `UNILABOS_BASICCONFIG_SK`
@@ -275,15 +275,15 @@ WebSocket 是 Uni-Lab 的主要通信方式：
 
 HTTP 客户端配置用于与云端服务通信：
 
-| 参数          | 类型 | 默认值                                 | 说明         |
-| ------------- | ---- | -------------------------------------- | ------------ |
-| `remote_addr` | str  | `"https://uni-lab.bohrium.com/api/v1"` | 远程服务地址 |
+| 参数          | 类型 | 默认值                                  | 说明         |
+| ------------- | ---- | --------------------------------------- | ------------ |
+| `remote_addr` | str  | `"https://leap-lab.bohrium.com/api/v1"` | 远程服务地址 |
 
 **预设环境地址**：
 
-- 生产环境：`https://uni-lab.bohrium.com/api/v1`（默认）
-- 测试环境：`https://uni-lab.test.bohrium.com/api/v1`
-- UAT 环境：`https://uni-lab.uat.bohrium.com/api/v1`
+- 生产环境：`https://leap-lab.bohrium.com/api/v1`（默认）
+- 测试环境：`https://leap-lab.test.bohrium.com/api/v1`
+- UAT 环境：`https://leap-lab.uat.bohrium.com/api/v1`
 - 本地环境：`http://127.0.0.1:48197/api/v1`
 
 ### 4. ROSConfig - ROS 配置
@@ -401,7 +401,7 @@ export UNILABOS_WSCONFIG_RECONNECT_INTERVAL="10"
 export UNILABOS_WSCONFIG_MAX_RECONNECT_ATTEMPTS="500"
 
 # 设置HTTP配置
-export UNILABOS_HTTPCONFIG_REMOTE_ADDR="https://uni-lab.test.bohrium.com/api/v1"
+export UNILABOS_HTTPCONFIG_REMOTE_ADDR="https://leap-lab.test.bohrium.com/api/v1"
 ```
 
 ## 配置文件使用方法
@@ -484,13 +484,13 @@ export UNILABOS_WSCONFIG_MAX_RECONNECT_ATTEMPTS=100
 
 ```python
 class HTTPConfig:
-    remote_addr = "https://uni-lab.test.bohrium.com/api/v1"
+    remote_addr = "https://leap-lab.test.bohrium.com/api/v1"
 ```
 
 **环境变量方式：**
 
 ```bash
-export UNILABOS_HTTPCONFIG_REMOTE_ADDR=https://uni-lab.test.bohrium.com/api/v1
+export UNILABOS_HTTPCONFIG_REMOTE_ADDR=https://leap-lab.test.bohrium.com/api/v1
 ```
 
 **命令行方式（推荐）：**

docs/ai_guides/agent_prompt_template.md

@@ -0,0 +1,344 @@
+# Uni-Lab-OS 设备接入 Agent — 提示词模板
+
+> 本文件提供一套可直接复制使用的 Agent 系统提示词，以及各平台的配置说明。
+> 提示词模板与 `add_device.md`（领域知识）配合使用，前者控制 Agent 行为，后者提供完整的技术细节。
+
+---
+
+## 系统提示词模板
+
+以下内容可直接作为系统提示词 / Instructions / Custom Instructions 使用。`{{...}}` 标记的变量根据平台替换。
+
+---
+
+### 开始复制 ↓
+
+```
+你是 Uni-Lab-OS 设备接入专家。你的任务是帮助用户将新的实验室硬件设备接入 Uni-Lab-OS 系统。
+
+你能做的事：
+- 根据用户描述，生成完整的设备驱动代码（Python）、注册表（YAML）和实验图文件（JSON）
+- 解读用户提供的通信协议文档、SDK 代码、或口述的指令格式
+- 诊断已有驱动代码的接口对齐问题
+
+你不能做的事：
+- 凭空猜测硬件私有通信指令（必须从用户提供的资料中获取）
+- 替代真实硬件联调测试
+
+## 知识来源
+
+{{KNOWLEDGE_LOADING}}
+
+## 工作流程
+
+当用户要求接入新设备时，严格按以下流程执行。每个暂停点必须等待用户确认后再继续。
+
+### 阶段 1：设备画像（交互）
+
+向用户收集以下三个信息，可以一次性提问：
+
+1. **设备类别** — 属于以下哪一种？
+   - temperature（温控）、pump_and_valve（泵阀）、motor（电机）
+   - heaterstirrer（加热搅拌）、balance（天平）、sensor（传感器）
+   - liquid_handling（液体处理）、robot_arm（机械臂）、workstation（工作站）
+   - virtual（虚拟设备）、custom（自定义）
+   - 如果是 pump_and_valve，进一步确认子类型：注射泵 / 电磁阀 / 蠕动泵
+
+2. **设备英文名称** — 用于文件名和类名（如 my_heater、runze_sy03b）
+
+3. **通信协议** — Serial(RS232/RS485) / Modbus RTU / Modbus TCP / TCP Socket / HTTP API / OPC UA / 无通信（虚拟）
+
+⏸️ **暂停：等待用户回答后继续**
+
+### 阶段 2：指令协议收集（交互）
+
+根据上一步确定的通信协议，引导用户提供指令信息：
+
+- 如果用户有 **SDK/驱动代码**：请用户提供代码文件，你从中提取通信逻辑
+- 如果用户有 **协议文档**：请用户提供文档（PDF/图片/文本），你从中解析指令格式
+- 如果用户 **口头描述**：针对每个标准动作逐一确认硬件指令
+- 如果是 **标准协议**（Modbus 寄存器表、SCPI）：请用户提供寄存器/指令映射
+- 如果是 **虚拟设备**：跳过此阶段
+
+⏸️ **暂停：确认已获取足够的指令协议信息**
+
+### 阶段 3：确认摘要
+
+在开始生成代码前，向用户展示你的理解摘要：
+
+```
+设备接入摘要：
+- 设备名称：<name>
+- 设备类别：<category>（<subtype>）
+- 通信协议：<protocol>
+- 指令来源：<source>
+- 将要实现的属性：<list>
+- 将要实现的动作：<list>
+- 同类已有设备：<existing>（将对齐其接口）
+```
+
+⏸️ **暂停：用户确认"没问题"后再生成代码**
+
+### 阶段 4：自动生成（无需暂停）
+
+按以下顺序自动执行：
+
+1. **对齐同类设备接口**（指南第四步）
+   - 查阅指南中的「现有设备接口快照」或搜索仓库注册表
+   - 确保所有已有设备的 status_types 和动作方法都被覆盖
+   - 参数名必须完全一致
+
+2. **生成驱动代码** — `unilabos/devices/<category>/<name>.py`
+
+3. **生成注册表** — `unilabos/registry/devices/<name>.yaml`（最小配置）
+
+4. **生成图文件** — `unilabos/test/experiments/graph_example_<name>.json`
+
+### 阶段 5：验证输出
+
+生成完成后，逐项检查对齐验证清单并展示结果：
+
+```
+对齐验证清单：
+- [x] 所有动作方法的参数名与已有设备完全一致
+- [x] status 属性返回的字符串值与已有设备一致
+- [x] 已有设备的所有 status_types 字段都有对应 @property
+- [x] 已有设备的所有非 auto- 前缀的 action 都有对应方法
+- [x] self.data 在 __init__ 中已预填充所有属性字段的默认值
+- [x] 串口/二进制协议的响应解析先定位帧起始标记
+```
+
+如果有未通过的项，主动修复后再展示。
+
+## 硬约束（违反任何一条都会导致设备接入失败）
+
+1. **禁止重命名参数** — 动作方法的参数名（如 volume、position、max_velocity）是接口契约，框架通过参数名分派调用。绝不能加后缀（如 volume_ml）、改名（如 speed_ml_s）。单位写在 docstring 中。
+
+2. **status 字符串必须一致** — 如果同类已有设备用英文（如 "Idle" / "Busy"），新驱动必须用相同的字符串，不能改为中文（如 "就绪"）。
+
+3. **self.data 必须预填充** — 不能用空字典 {}。框架在 initialize() 之前就可能读取属性值。每个 @property 对应的键都必须在 __init__ 中有初始值。
+
+4. **禁止跳过接口对齐** — 对齐同类设备接口是强制步骤。缺失的属性和动作会导致设备在工作流中不可互换。
+
+5. **串口解析先找帧头** — RS-485 总线上响应前常有回声/噪声字节。必须先定位帧起始标记（如 /、0xFE），禁止用硬编码索引直接解析。
+
+6. **异步等待用 _ros_node.sleep** — 在 async 方法中使用 await self._ros_node.sleep()，禁止 time.sleep()（阻塞事件循环）和 asyncio.sleep()。
+
+7. **物理单位对外暴露** — 对外参数使用用户友好的物理单位（mL、°C、RPM），驱动内部负责转换到硬件原始值（步数、Hz、寄存器值）。
+
+## 代码骨架参考
+
+所有设备驱动遵循以下结构：
+
+```python
+import logging
+import time as time_module
+from typing import Dict, Any
+
+try:
+    from unilabos.ros.nodes.base_device_node import BaseROS2DeviceNode
+except ImportError:
+    BaseROS2DeviceNode = None
+
+class MyDevice:
+    _ros_node: "BaseROS2DeviceNode"
+
+    def __init__(self, device_id: str = None, config: Dict[str, Any] = None, **kwargs):
+        if device_id is None and 'id' in kwargs:
+            device_id = kwargs.pop('id')
+        if config is None and 'config' in kwargs:
+            config = kwargs.pop('config')
+        self.device_id = device_id or "unknown_device"
+        self.config = config or {}
+        self.logger = logging.getLogger(f"MyDevice.{self.device_id}")
+        self.data = {
+            "status": "Idle",
+            # 所有 @property 的键都必须在此预填充
+        }
+
+    def post_init(self, ros_node: "BaseROS2DeviceNode"):
+        self._ros_node = ros_node
+
+    async def initialize(self) -> bool:
+        self.data["status"] = "Idle"
+        return True
+
+    async def cleanup(self) -> bool:
+        self.data["status"] = "Offline"
+        return True
+
+    @property
+    def status(self) -> str:
+        return self.data.get("status", "Idle")
+```
+
+## 注册表最小配置
+
+```yaml
+my_device:
+  class:
+    module: unilabos.devices.<category>.<file>:MyDevice
+    type: python
+```
+
+启动时 --complete_registry 自动生成 status_types 和 action_value_mappings。
+
+## 图文件模板
+
+```json
+{
+    "nodes": [
+        {
+            "id": "my_device_1",
+            "name": "设备名称",
+            "children": [],
+            "parent": null,
+            "type": "device",
+            "class": "my_device",
+            "position": {"x": 0, "y": 0, "z": 0},
+            "config": {},
+            "data": {}
+        }
+    ]
+}
+```
+
+## 现有设备接口快照（对齐用）
+
+对齐时参考以下已有设备接口。如果能联网，优先从 GitHub 获取最新版本：
+https://github.com/dptech-corp/Uni-Lab-OS/tree/main/unilabos/registry/devices/
+
+### pump_and_valve — 注射泵
+
+已有设备：syringe_pump_with_valve.runze.SY03B-T06
+
+属性：status(str, "Idle"/"Busy"), valve_position(str), position(float, mL), max_velocity(float, mL/s), mode(int), plunger_position(String), velocity_grade(String), velocity_init(String), velocity_end(String)
+
+方法签名（参数名不可改）：
+- initialize()
+- set_valve_position(position)
+- set_position(position: float, max_velocity: float = None)
+- pull_plunger(volume: float)
+- push_plunger(volume: float)
+- set_max_velocity(velocity: float)
+- set_velocity_grade(velocity)
+- stop_operation()
+
+### pump_and_valve — 电磁阀
+
+属性：status(str), valve_position(str)
+方法：open(), close(), set_valve_position(position), is_open(), is_closed()
+
+### temperature
+
+属性：status(str), temp(float, °C), temp_target(float, °C), stir_speed(float, RPM), temp_warning(float, °C)
+
+### motor
+
+属性：status(str), position(int)
+
+### sensor
+
+属性：level(bool), rssi(int)
+```
+
+### 结束复制 ↑
+
+---
+
+## `{{KNOWLEDGE_LOADING}}` 变量替换
+
+根据平台能力，将提示词中的 `{{KNOWLEDGE_LOADING}}` 替换为以下对应内容：
+
+### 方案 A：有知识库（Custom GPT / Claude Project）
+
+```
+你的知识库中包含 add_device.md 文件，这是完整的设备接入指南。
+执行工作流时，参考该文件获取物模型模板、通信协议代码片段、指令协议模式和常见错误检查清单。
+本提示词中的「现有设备接口快照」和「硬约束」是从指南中提炼的关键内容，以确保即使知识库检索不完整也能正确工作。
+```
+
+### 方案 B：有联网能力
+
+```
+执行工作流前，从以下 URL 获取完整的设备接入指南：
+https://raw.githubusercontent.com/dptech-corp/Uni-Lab-OS/main/docs/ai_guides/add_device.md
+
+该指南包含物模型模板、通信协议代码片段、指令协议模式和常见错误检查清单。
+如果无法访问 URL，使用本提示词中内联的「现有设备接口快照」和「代码骨架参考」作为兜底。
+```
+
+### 方案 C：无知识库、无联网
+
+```
+完整的设备接入指南需要用户在对话中提供。
+如果用户未主动提供，请在阶段 1 开始前询问：
+"请将 add_device.md 的内容粘贴到对话中，或上传该文件。如果没有该文件，我将使用内置的精简规则工作。"
+
+本提示词已内联了最关键的内容（硬约束 + 代码骨架 + 接口快照），足以生成基本正确的驱动。
+但完整指南包含更多物模型模板和通信协议代码片段，能显著提升生成质量。
+```
+
+---
+
+## 各平台配置指南
+
+### OpenAI Custom GPT
+
+1. 进入 https://chat.openai.com/gpts/editor
+2. **Name**：Uni-Lab-OS 设备接入助手
+3. **Description**：帮助用户将实验室硬件设备接入 Uni-Lab-OS 系统，自动生成驱动代码、注册表和图文件。
+4. **Instructions**：粘贴上方系统提示词，`{{KNOWLEDGE_LOADING}}` 替换为方案 A
+5. **Knowledge**：上传 `docs/ai_guides/add_device.md`
+6. **Capabilities**：开启 Code Interpreter（用于代码验证）
+7. **Conversation starters**：
+   - "我要接入一个新的注射泵"
+   - "帮我把这个 SDK 包装成 UniLab 驱动"
+   - "检查我的设备驱动有没有接口问题"
+
+### Claude Project
+
+1. 创建新 Project
+2. **Custom Instructions**：粘贴系统提示词，`{{KNOWLEDGE_LOADING}}` 替换为方案 A
+3. **Project Knowledge**：上传 `docs/ai_guides/add_device.md`
+
+### API Agent（LangChain / AutoGen / 自建框架）
+
+```python
+system_prompt = """
+<粘贴完整系统提示词，{{KNOWLEDGE_LOADING}} 替换为方案 B>
+"""
+
+# 如果框架支持工具调用，可注册以下工具：
+tools = [
+    {
+        "name": "fetch_device_guide",
+        "description": "获取最新的 Uni-Lab-OS 设备接入指南",
+        "url": "https://raw.githubusercontent.com/dptech-corp/Uni-Lab-OS/main/docs/ai_guides/add_device.md"
+    },
+    {
+        "name": "fetch_registry",
+        "description": "获取最新的设备注册表",
+        "url": "https://raw.githubusercontent.com/dptech-corp/Uni-Lab-OS/main/unilabos/registry/devices/{category}.yaml"
+    },
+]
+```
+
+### Cursor Agent Mode
+
+无需使用本模板。Cursor 中使用已有的 `.cursor/skills/add-device/SKILL.md`，它会自动读取 `docs/ai_guides/add_device.md` 并利用 Cursor 的工具能力（Grep 搜索注册表、AskQuestion 收集信息等）。
+
+### 纯网页对话（ChatGPT / Claude 无 Project）
+
+1. 第一条消息粘贴系统提示词（`{{KNOWLEDGE_LOADING}}` 替换为方案 C）
+2. 第二条消息上传或粘贴 `add_device.md`
+3. 第三条消息开始描述设备
+
+---
+
+## 维护说明
+
+- **硬约束更新**：如果 `add_device.md` 中新增了禁止事项或常见错误，需要同步更新本模板的「硬约束」部分
+- **接口快照更新**：新增设备类别或已有设备接口变更时，需要同步更新本模板的「现有设备接口快照」部分
+- **工作流调整**：如果接入流程发生变化（新增步骤、合并步骤），需要同步调整「工作流程」部分
+- 本模板与 `add_device.md` 是**互补关系**：模板定义 Agent 行为，指南提供领域知识。两者独立维护

docs/developer_guide/add_device.md

@@ -15,6 +15,9 @@ Python 类设备驱动在完成注册表后可以直接在 Uni-Lab 中使用，
 **示例：**
 
 ```python
+from unilabos.registry.decorators import device, topic_config
+
+@device(id="mock_gripper", category=["gripper"], description="Mock Gripper")
 class MockGripper:
     def __init__(self):
         self._position: float = 0.0
@@ -23,19 +26,23 @@ class MockGripper:
         self._status = "Idle"
 
     @property
+    @topic_config()  # 添加 @topic_config 才会定时广播
     def position(self) -> float:
         return self._position
 
     @property
+    @topic_config()
     def velocity(self) -> float:
         return self._velocity
 
     @property
+    @topic_config()
     def torque(self) -> float:
         return self._torque
 
-    # 会被自动识别的设备属性，接入 Uni-Lab 时会定时对外广播
+    # 使用 @topic_config 装饰的属性，接入 Uni-Lab 时会定时对外广播
     @property
+    @topic_config(period=2.0)  # 可自定义发布周期
     def status(self) -> str:
         return self._status
 
@@ -149,7 +156,7 @@ my_device: # 设备唯一标识符
 
 系统会自动分析您的 Python 驱动类并生成：
 
-- `status_types`：从 `@property` 装饰的方法自动识别状态属性
+- `status_types`：从 `@topic_config` 装饰的 `@property` 或方法自动识别状态属性
 - `action_value_mappings`：从类方法自动生成动作映射
 - `init_param_schema`：从 `__init__` 方法分析初始化参数
 - `schema`：前端显示用的属性类型定义
@@ -179,7 +186,9 @@ Uni-Lab 设备驱动是一个 Python 类，需要遵循以下结构：
 
 ```python
 from typing import Dict, Any
+from unilabos.registry.decorators import device, topic_config
 
+@device(id="my_device", category=["general"], description="My Device")
 class MyDevice:
     """设备类文档字符串
 
@@ -198,8 +207,9 @@ class MyDevice:
         # 初始化硬件连接
 
     @property
+    @topic_config()  # 必须添加 @topic_config 才会广播
     def status(self) -> str:
-        """设备状态（会自动广播）"""
+        """设备状态（通过 @topic_config 广播）"""
         return self._status
 
     def my_action(self, param: float) -> Dict[str, Any]:
@@ -217,34 +227,61 @@ class MyDevice:
 
 ## 状态属性 vs 动作方法
 
-### 状态属性（@property）
+### 状态属性（@property + @topic_config）
 
-状态属性会被自动识别并定期广播：
+状态属性需要同时使用 `@property` 和 `@topic_config` 装饰器才会被识别并定期广播：
 
 ```python
+from unilabos.registry.decorators import topic_config
+
 @property
+@topic_config()  # 必须添加，否则不会广播
 def temperature(self) -> float:
     """当前温度"""
     return self._read_temperature()
 
 @property
+@topic_config(period=2.0)  # 可自定义发布周期（秒）
 def status(self) -> str:
     """设备状态: idle, running, error"""
     return self._status
 
 @property
+@topic_config(name="ready")  # 可自定义发布名称
 def is_ready(self) -> bool:
     """设备是否就绪"""
     return self._status == "idle"
 ```
 
+也可以使用普通方法（非 @property）配合 `@topic_config`：
+
+```python
+@topic_config(period=10.0)
+def get_sensor_data(self) -> Dict[str, float]:
+    """获取传感器数据（get_ 前缀会自动去除，发布名为 sensor_data）"""
+    return {"temp": self._temp, "humidity": self._humidity}
+```
+
+**`@topic_config` 参数**:
+
+| 参数 | 类型 | 默认值 | 说明 |
+|------|------|--------|------|
+| `period` | float | 5.0 | 发布周期（秒） |
+| `print_publish` | bool | 节点默认 | 是否打印发布日志 |
+| `qos` | int | 10 | QoS 深度 |
+| `name` | str | None | 自定义发布名称 |
+
+**发布名称优先级**：`@topic_config(name=...)` > `get_` 前缀去除 > 方法名
+
 **特点**:
 
-- 使用`@property`装饰器
-- 只读，不能有参数
-- 自动添加到注册表的`status_types`
+- 必须使用 `@topic_config` 装饰器
+- 支持 `@property` 和普通方法
+- 添加到注册表的 `status_types`
 - 定期发布到 ROS2 topic
 
+> **⚠️ 重要：** 仅有 `@property` 装饰器而没有 `@topic_config` 的属性**不会**被广播。这是一个 Breaking Change。
+
 ### 动作方法
 
 动作方法是设备可以执行的操作：
@@ -497,6 +534,7 @@ class LiquidHandler:
         self._status = "idle"
 
     @property
+    @topic_config()
     def status(self) -> str:
         return self._status
 
@@ -886,7 +924,52 @@ class MyDevice:
 
 ## 最佳实践
 
-### 1. 类型注解
+### 1. 使用 `@device` 装饰器标识设备类
+
+```python
+from unilabos.registry.decorators import device
+
+@device(id="my_device", category=["heating"], description="My Heating Device", icon="heater.webp")
+class MyDevice:
+    ...
+```
+
+- `id`：设备唯一标识符，用于注册表匹配
+- `category`：分类列表，前端用于分组显示
+- `description`：设备描述
+- `icon`：图标文件名（可选）
+
+### 2. 使用 `@topic_config` 声明需要广播的状态
+
+```python
+from unilabos.registry.decorators import topic_config
+
+# ✓ @property + @topic_config → 会广播
+@property
+@topic_config(period=2.0)
+def temperature(self) -> float:
+    return self._temp
+
+# ✓ 普通方法 + @topic_config → 会广播（get_ 前缀自动去除）
+@topic_config(period=10.0)
+def get_sensor_data(self) -> Dict[str, float]:
+    return {"temp": self._temp}
+
+# ✓ 使用 name 参数自定义发布名称
+@property
+@topic_config(name="ready")
+def is_ready(self) -> bool:
+    return self._status == "idle"
+
+# ✗ 仅有 @property，没有 @topic_config → 不会广播
+@property
+def internal_state(self) -> str:
+    return self._state
+```
+
+> **注意：** 与 `@property` 连用时，`@topic_config` 必须放在 `@property` 下面。
+
+### 3. 类型注解
 
 ```python
 from typing import Dict, Any, Optional, List
@@ -901,7 +984,7 @@ def method(
     pass
 ```
 
-### 2. 文档字符串
+### 4. 文档字符串
 
 ```python
 def method(self, param: float) -> Dict[str, Any]:
@@ -923,7 +1006,7 @@ def method(self, param: float) -> Dict[str, Any]:
     pass
 ```
 
-### 3. 配置验证
+### 5. 配置验证
 
 ```python
 def __init__(self, config: Dict[str, Any]):
@@ -937,7 +1020,7 @@ def __init__(self, config: Dict[str, Any]):
     self.baudrate = config['baudrate']
 ```
 
-### 4. 资源清理
+### 6. 资源清理
 
 ```python
 def __del__(self):
@@ -946,7 +1029,7 @@ def __del__(self):
         self.connection.close()
 ```
 
-### 5. 设计前端友好的返回值
+### 7. 设计前端友好的返回值
 
 **记住：返回值会直接显示在 Web 界面**
 

docs/developer_guide/add_old_device.md

@@ -18,13 +18,15 @@ Uni-Lab 开发团队在仓库中提供了 3 个样例：
 
 - 单一机械设备**电夹爪**，通讯协议可见 [增广夹爪通讯协议](https://doc.rmaxis.com/docs/communication/fieldbus/)，驱动代码位于 `unilabos/devices/gripper/rmaxis_v4.py`
 - 单一通信设备**IO 板卡**，驱动代码位于 `unilabos/device_comms/gripper/SRND_16_IO.py`
-- 执行多设备复杂任务逻辑的**PLC**，Uni-Lab 提供了基于地址表的接入方式和点动工作流编写，测试代码位于 `unilabos/device_comms/modbus_plc/test/test_workflow.py`
+- 执行多设备复杂任务逻辑的**PLC**，Uni-Lab 提供了基于地址表的接入方式和点动工作流编写，测试代码位于 `unilabos/device_comms/modbus_plc/test/test_workflow.py`。详细框架说明请参考 {doc}`plc_framework`
 
 ---
 
 ## 其他工业通信协议：CANopen, Ethernet, OPCUA...
 
-【敬请期待】
+Uni-Lab 已实现基于 OPC UA 协议的 PLC 接管框架，用于后处理工站等项目。与 Modbus 框架相比，OPC UA 框架额外提供了自动节点发现、订阅推送、断线重连等特性。详细说明请参考 {doc}`plc_framework`。
+
+其他协议（CANopen、EtherCAT 等）【敬请期待】
 
 ## 没有接口的老设备老软件：使用 PyWinAuto
 

docs/developer_guide/add_registry.md

@@ -422,18 +422,20 @@ placeholder_keys:
 
 ### status_types
 
-系统会扫描你的 Python 类，从状态方法（property 或 get\_方法）自动生成这部分：
+系统会扫描你的 Python 类，从带有 `@topic_config` 装饰器的 `@property` 或方法自动生成这部分：
 
 ```yaml
 status_types:
-  current_temperature: float # 从 get_current_temperature() 或 @property current_temperature
-  is_heating: bool # 从 get_is_heating() 或 @property is_heating
-  status: str # 从 get_status() 或 @property status
+  current_temperature: float # 从 @topic_config 装饰的 @property 或方法
+  is_heating: bool
+  status: str
 ```
 
 **注意事项**：
 
-- 系统会查找所有 `get_` 开头的方法和 `@property` 装饰的属性
+- 仅有带 `@topic_config` 装饰器的 `@property` 或方法才会被识别为状态属性
+- 没有 `@topic_config` 的 `@property` 不会生成 status_types，也不会广播
+- `get_` 前缀的方法名会自动去除前缀（如 `get_temperature` → `temperature`）
 - 类型会自动转成相应的类型（如 `str`、`float`、`bool`）
 - 如果类型是 `Any`、`None` 或未知的，默认使用 `String`
 
@@ -537,11 +539,13 @@ class AdvancedLiquidHandler:
         self._temperature = 25.0
 
     @property
+    @topic_config()
     def status(self) -> str:
         """设备状态"""
         return self._status
 
     @property
+    @topic_config()
     def temperature(self) -> float:
         """当前温度"""
         return self._temperature
@@ -809,21 +813,23 @@ my_temperature_controller:
 你的设备类需要符合以下要求：
 
 ```python
-from unilabos.common.device_base import DeviceBase
+from unilabos.registry.decorators import device, topic_config
 
-class MyDevice(DeviceBase):
+@device(id="my_device", category=["temperature"], description="My Device")
+class MyDevice:
     def __init__(self, config):
         """初始化，参数会自动分析到 init_param_schema.config"""
-        super().__init__(config)
         self.port = config.get('port', '/dev/ttyUSB0')
 
-    # 状态方法（会自动生成到 status_types）
+    # 状态方法（必须添加 @topic_config 才会生成到 status_types 并广播）
     @property
+    @topic_config()
     def status(self):
         """返回设备状态"""
         return "idle"
 
     @property
+    @topic_config()
     def temperature(self):
         """返回当前温度"""
         return 25.0
@@ -1039,7 +1045,34 @@ resource.type      # "resource"
 
 ### 代码规范
 
-1. **始终使用类型注解**
+1. **使用 `@device` 装饰器标识设备类**
+
+```python
+from unilabos.registry.decorators import device
+
+@device(id="my_device", category=["heating"], description="My Device")
+class MyDevice:
+    ...
+```
+
+2. **使用 `@topic_config` 声明广播属性**
+
+```python
+from unilabos.registry.decorators import topic_config
+
+# ✓ 需要广播的状态属性
+@property
+@topic_config(period=2.0)
+def temperature(self) -> float:
+    return self._temp
+
+# ✗ 仅有 @property 不会广播
+@property
+def internal_counter(self) -> int:
+    return self._counter
+```
+
+3. **始终使用类型注解**
 
 ```python
 # ✓ 好
@@ -1051,7 +1084,7 @@ def method(self, resource, device):
     pass
 ```
 
-2. **提供有意义的参数名**
+4. **提供有意义的参数名**
 
 ```python
 # ✓ 好 - 清晰的参数名
@@ -1063,7 +1096,7 @@ def transfer(self, r1: ResourceSlot, r2: ResourceSlot):
     pass
 ```
 
-3. **使用 Optional 表示可选参数**
+5. **使用 Optional 表示可选参数**
 
 ```python
 from typing import Optional
@@ -1076,7 +1109,7 @@ def method(
     pass
 ```
 
-4. **添加详细的文档字符串**
+6. **添加详细的文档字符串**
 
 ```python
 def method(
@@ -1096,13 +1129,13 @@ def method(
     pass
 ```
 
-5. **方法命名规范**
+7. **方法命名规范**
 
-   - 状态方法使用 `@property` 装饰器或 `get_` 前缀
+   - 状态方法使用 `@property` + `@topic_config` 装饰器，或普通方法 + `@topic_config`
    - 动作方法使用动词开头
    - 保持命名清晰、一致
 
-6. **完善的错误处理**
+8. **完善的错误处理**
    - 实现完善的错误处理
    - 添加日志记录
    - 提供有意义的错误信息

docs/developer_guide/networking_overview.md

@@ -23,7 +23,7 @@ Uni-Lab-OS 支持多种部署模式：
 ```
 ┌──────────────────────────────────────────────┐
 │      Cloud Platform/Self-hosted Platform     │
-│           uni-lab.bohrium.com                │
+│           leap-lab.bohrium.com                │
 │  (Resource Management, Task Scheduling,      │
 │              Monitoring)                     │
 └────────────────────┬─────────────────────────┘
@@ -221,10 +221,10 @@ Laboratory A    Laboratory B
 
 ```bash
 # 实验室A
-unilab --ak your_ak --sk your_sk --upload_registry --use_remote_resource
+unilab --ak your_ak --sk your_sk --upload_registry
 
 # 实验室B
-unilab --ak your_ak --sk your_sk --upload_registry --use_remote_resource
+unilab --ak your_ak --sk your_sk --upload_registry
 ```
 
 ---
@@ -444,7 +444,7 @@ ros2 daemon stop && ros2 daemon start
 
 ```bash
 # 测试云端连接
-curl https://uni-lab.bohrium.com/api/v1/health
+curl https://leap-lab.bohrium.com/api/v1/health
 
 # 测试WebSocket
 # 启动Uni-Lab后查看日志

docs/developer_guide/plc_framework.md

@@ -0,0 +1,281 @@
+# PLC 设备接管框架
+
+> 本文档面向初次接触 UniLab-OS 的开发者，介绍系统如何通过工业协议"接管"（连接并控制）PLC 设备。
+
+## 什么是"PLC 接管"？
+
+**PLC**（可编程逻辑控制器）是工厂设备的控制核心，驱动机械臂、泵、阀门等硬件。UniLab-OS 通过网络协议直接读写 PLC 内部变量，从而控制设备运行：
+
+```
+UniLab-OS（Python）  ←通信协议→  PLC  ←电信号→  电机/气缸/传感器
+```
+
+UniLab-OS 提供两套接管框架，对应两种工业协议：
+
+| 框架            | 协议             | 应用项目           | 核心文件                                                    |
+| --------------- | ---------------- | ------------------ | ----------------------------------------------------------- |
+| **Modbus 框架** | Modbus TCP / RTU | 扣式电池装配工站   | `unilabos/device_comms/modbus_plc/client.py`                |
+| **OPC UA 框架** | OPC UA           | 后处理工站（怀柔） | `unilabos/devices/workstation/post_process/post_process.py` |
+
+两套框架**设计思想完全一致**，底层通信协议不同。理解一个，另一个基本触类旁通。
+
+---
+
+## 核心概念
+
+### 节点（Node）
+
+节点是 PLC 内部一个具体的变量地址，可以理解为 PLC 的一个输入/输出端口。
+
+| 属性 | 说明                                   | 示例                 |
+| ---- | -------------------------------------- | -------------------- |
+| 名称 | 人类可读标识                           | `COIL_SYS_START_CMD` |
+| 地址 | PLC 内存地址                           | `0x0064`             |
+| 类型 | Coil / HoldRegister / InputRegister 等 | `coil`               |
+
+```
+PLC 内存空间
+├── Coil 区:    True / False  ← 控制开关量（启动/停止/复位）
+├── Hold Reg:   120, 35.5 …  ← 存参数值（速度、位置）
+└── Input Reg:  99.8, 42 …   ← 只读传感器数据
+```
+
+### 动作生命周期（Action Lifecycle）
+
+每个设备动作被拆分为 4 个阶段，用 `try/finally` 保证安全性：
+
+```python
+try:
+    init(...)    # 写入参数（速度、位置等）— 可选
+    start(...)   # 发触发信号 + 轮询等待完成
+    stop(...)    # 复位触发信号（成功时执行）
+except:
+    is_err = True
+finally:
+    cleanup(...) # 无论成败都执行，作为安全兜底
+```
+
+| 阶段      | 何时执行                | 典型内容                             |
+| --------- | ----------------------- | ------------------------------------ |
+| `init`    | 成功路径（可选）        | 写运动速度 = 20.0                    |
+| `start`   | 成功路径                | 写启动位 = True，等待完成位 = True   |
+| `stop`    | 成功路径                | 写启动位 = False（正常复位）         |
+| `cleanup` | **无论成败**（finally） | 安全兜底复位，防止异常时设备持续运动 |
+
+> **为什么 `cleanup` 无论成败都执行？**
+> 若 `start` 阶段因传感器故障抛出异常，`stop` 会被跳过，PLC 触发位仍为 `True`——设备可能持续运动。`cleanup` 放在 `finally` 块中，作为最后的安全保障，确保 PLC 一定被复位到安全状态。实际上大多数动作将 `cleanup` 设为 `null`，由 `stop` 负责正常复位即可。
+
+---
+
+## Modbus 框架
+
+**核心文件**：`unilabos/device_comms/modbus_plc/client.py`
+**参考实现**：`unilabos/devices/workstation/coin_cell_assembly/coin_cell_assembly.py`
+
+### 连接与节点注册
+
+```python
+from unilabos.device_comms.modbus_plc.client import TCPClient, BaseClient
+
+# 1. 建立 TCP 连接
+client = TCPClient(addr="172.16.28.102", port=502)
+client.client.connect()
+
+# 2. 从 CSV 加载节点定义
+nodes = BaseClient.load_csv("coin_cell_assembly_b.csv")
+
+# 3. 注册节点，之后可按名称访问
+client.register_node_list(nodes)
+
+# 访问节点
+client.use_node('COIL_SYS_START_CMD').write(True)
+value, err = client.use_node('COIL_SYS_START_STATUS').read(1)
+```
+
+**CSV 格式**（`Name` / `DeviceType` / `Address` / `DataType`）：
+
+| Name               | DeviceType    | Address | DataType |
+| ------------------ | ------------- | ------- | -------- |
+| COIL_SYS_START_CMD | coil          | 100     | INT16    |
+| REG_SPEED          | hold_register | 200     | FLOAT32  |
+
+### 三段式接管流程（扣式电池工站）
+
+PLC 设备通常需要按固定顺序切换模式，以扣式电池工站为例：
+
+```
+Python                             PLC
+  │── 写 HAND_CMD = True ─────────>│ 切换到手动模式
+  │<─ 读 HAND_STATUS = True ────────│ 确认进入手动
+  │── 写 INIT_CMD = True ──────────>│ 执行初始化
+  │<─ 读 INIT_STATUS = True ─────────│ 初始化完成
+  │── 写 HAND_CMD = False ──────────>│ 复位（脉冲信号）
+  │── 写 INIT_CMD = False ──────────>│ 复位
+  │── 写 AUTO_CMD = True ───────────>│ 切换自动模式
+  │<─ 读 AUTO_STATUS = True ─────────│ 自动模式就绪
+  │── 写 AUTO_CMD = False ──────────>│ 复位
+  │── 写 START_CMD = True ──────────>│ 开始运行
+  │<─ 读 START_STATUS = True ────────│ 运行确认
+  │── 写 START_CMD = False ──────────>│ 复位
+```
+
+> **脉冲信号模式**：命令写 `True` → 等待 PLC 状态位确认 → 命令写回 `False`，这是大多数 PLC 的标准触发方式，而不是保持高电平。
+
+### JSON 配置方式
+
+Modbus 框架支持纯 JSON 配置，无需手写 Python 流程：
+
+```json
+{
+    "register_node_list_from_csv_path": {"path": "M01.csv"},
+    "create_flow": [
+        {
+            "name": "归位",
+            "action": [{
+                "address_function_to_create": [
+                    {"func_name": "pos_tip",      "node_name": "M01_idlepos_coil_w",    "mode": "write", "value": true},
+                    {"func_name": "pos_tip_read", "node_name": "M01_idlepos_coil_r",    "mode": "read",  "value": 1},
+                    {"func_name": "manual_stop",  "node_name": "M01_manual_stop_coil_r","mode": "read",  "value": 1}
+                ],
+                "create_init_function":  {"func_name": "idel_init", "node_name": "M01_idlepos_velocity_rw", "mode": "write", "value": 20.0},
+                "create_start_function": {
+                    "func_name": "idel_position",
+                    "write_functions": ["pos_tip"],
+                    "condition_functions": ["pos_tip_read", "manual_stop"],
+                    "stop_condition_expression": "pos_tip_read[0] and manual_stop[0]"
+                },
+                "create_stop_function":  {"func_name": "idel_stop", "node_name": "M01_idlepos_coil_w", "mode": "write", "value": false},
+                "create_cleanup_function": null
+            }]
+        }
+    ],
+    "execute_flow": ["归位"]
+}
+```
+
+执行：
+
+```python
+client.execute_procedure_from_json(json_data)
+```
+
+---
+
+## OPC UA 框架
+
+**核心文件**：`unilabos/devices/workstation/post_process/post_process.py`
+**参考实现**：`unilabos/devices/workstation/post_process/opcua_huairou.json`
+
+### 与 Modbus 的主要区别
+
+| 特性       | Modbus               | OPC UA                            |
+| ---------- | -------------------- | --------------------------------- |
+| 节点发现   | 手动填写 CSV 地址    | **自动遍历**服务器节点树          |
+| 数据获取   | 轮询（主动问）       | **订阅推送**（有变化时通知）      |
+| 节点标识   | 数字地址（如 `100`） | 字符串 NodeId（如 `ns=2;s=速度`） |
+| 断线处理   | 无                   | **后台监控线程**自动重连          |
+| 认证安全   | 无                   | 支持用户名/密码                   |
+| 工作流调用 | 手动调用             | **自动注册为实例方法**            |
+
+### 连接与节点发现
+
+```python
+from unilabos.devices.workstation.post_process.post_process import OpcUaClient
+
+client = OpcUaClient(
+    url="opc.tcp://192.168.1.100:4840",
+    username="admin",              # 可选
+    password="123456",             # 可选
+    config_path="opcua_huairou.json",  # 自动加载工作流配置
+    cache_timeout=5.0,             # 节点值缓存 5 秒
+    subscription_interval=500,     # 每 500ms 接收推送
+)
+
+# 节点自动通过订阅保持最新值，读取直接查本地缓存
+value = client.get_node_value("grab_complete")
+```
+
+### JSON 配置方式
+
+```json
+{
+    "register_node_list_from_csv_path": {"path": "opcua_nodes_huairou.csv"},
+    "create_flow": [
+        {
+            "name": "trigger_grab_action",
+            "description": "触发反应罐及原料罐抓取动作",
+            "parameters": ["reaction_tank_number", "raw_tank_number"],
+            "action": [{
+                "init_function": {
+                    "func_name": "init_grab_params",
+                    "write_nodes": ["reaction_tank_number", "raw_tank_number"]
+                },
+                "start_function": {
+                    "func_name": "start_grab",
+                    "write_nodes": {"grab_trigger": true},
+                    "condition_nodes": ["grab_complete"],
+                    "stop_condition_expression": "grab_complete == True",
+                    "timeout_seconds": 999999.0
+                },
+                "stop_function": {
+                    "func_name": "stop_grab",
+                    "write_nodes": {"grab_trigger": false}
+                }
+            }]
+        }
+    ]
+}
+```
+
+配置加载后，工作流自动注册为实例方法：
+
+```python
+# 直接调用，传入参数，框架自动写入对应节点
+client.trigger_grab_action(reaction_tank_number=2, raw_tank_number=3)
+```
+
+---
+
+## 新增设备快速上手
+
+### 使用 Modbus 框架
+
+```
+1. 从 PLC 工程师处拿到地址表，按格式填写 CSV（Name/DeviceType/Address/DataType）
+2. 继承 BaseClient，在 __init__ 中连接并注册节点
+3. 参考 coin_cell_assembly.py 编写三段式接管函数（手动→初始化→自动→启动）
+4. 或直接编写 JSON 配置，调用 execute_procedure_from_json()
+```
+
+### 使用 OPC UA 框架
+
+```
+1. 确认设备支持 OPC UA，拿到服务器 URL（格式：opc.tcp://IP:PORT）
+2. 准备 CSV 节点定义文件（可选，也可让框架自动发现）
+3. 编写 JSON 配置：定义 parameters、init/start/stop 函数
+4. 实例化 OpcUaClient，传入 config_path，直接调用自动注册的工作流方法
+```
+
+---
+
+## 常见问题
+
+**Q: `node {name} is not registered` 报错？**
+A: 节点名不在 CSV 或未调用 `register_node_list_from_csv_path()`。
+
+**Q: 程序卡死在 `while not status(): sleep(1)`？**
+A: PLC 未返回预期完成信号。检查：PLC 是否在正确运行模式、状态位地址是否正确、PLC 有无报警。
+
+**Q: OPC UA 连接成功但读不到节点？**
+A: 检查节点名称是否与服务器显示名一致（区分中英文）。可调用 `_find_nodes()` 打印服务器全部节点。
+
+**Q: 应该选 Modbus 还是 OPC UA？**
+A: 取决于设备支持的协议，由 PLC 工程师决定。OPC UA 功能更完整，条件允许优先选择。
+
+---
+
+## 下一步
+
+- {doc}`add_device` - 将驱动集成进 UniLab-OS 设备节点
+- {doc}`add_action` - 为设备添加可调度的动作指令
+- {doc}`add_yaml` - 编写设备注册表 YAML 文件

docs/index.md

@@ -17,6 +17,9 @@ developer_guide/http_api.md
 developer_guide/networking_overview.md
 developer_guide/add_device.md
 developer_guide/add_action.md
+developer_guide/add_old_device.md
+developer_guide/plc_framework.md
+developer_guide/add_protocol.md
 developer_guide/add_registry.md
 developer_guide/add_yaml.md
 developer_guide/action_includes.md

docs/user_guide/best_practice.md

@@ -33,11 +33,11 @@
 
 **选择合适的安装包：**
 
-| 安装包 | 适用场景 | 包含组件 |
-|--------|----------|----------|
-| `unilabos` | **推荐大多数用户**，生产部署 | 完整安装包，开箱即用 |
-| `unilabos-env` | 开发者（可编辑安装） | 仅环境依赖，通过 pip 安装 unilabos |
-| `unilabos-full` | 仿真/可视化 | unilabos + 完整 ROS2 桌面版 + Gazebo + MoveIt |
+| 安装包          | 适用场景                     | 包含组件                                      |
+| --------------- | ---------------------------- | --------------------------------------------- |
+| `unilabos`      | **推荐大多数用户**，生产部署 | 完整安装包，开箱即用                          |
+| `unilabos-env`  | 开发者（可编辑安装）         | 仅环境依赖，通过 pip 安装 unilabos            |
+| `unilabos-full` | 仿真/可视化                  | unilabos + 完整 ROS2 桌面版 + Gazebo + MoveIt |
 
 **关键步骤：**
 
@@ -66,6 +66,7 @@ mamba install uni-lab::unilabos-full -c robostack-staging -c conda-forge
 ```
 
 **选择建议：**
+
 - **日常使用/生产部署**：使用 `unilabos`（推荐），完整功能，开箱即用
 - **开发者**：使用 `unilabos-env` + `pip install -e .` + `uv pip install -r unilabos/utils/requirements.txt`，代码修改立即生效
 - **仿真/可视化**：使用 `unilabos-full`，含 Gazebo、rviz2、MoveIt
@@ -88,7 +89,7 @@ python -c "from unilabos_msgs.msg import Resource; print('ROS msgs OK')"
 
 #### 2.1 注册实验室账号
 
-1. 访问 [https://uni-lab.bohrium.com](https://uni-lab.bohrium.com)
+1. 访问 [https://leap-lab.bohrium.com](https://leap-lab.bohrium.com)
 2. 注册账号并登录
 3. 创建新实验室
 
@@ -297,7 +298,7 @@ unilab --ak your_ak --sk your_sk -g test/experiments/mock_devices/mock_all.json
 
 #### 5.2 访问 Web 界面
 
-启动系统后，访问[https://uni-lab.bohrium.com](https://uni-lab.bohrium.com)
+启动系统后，访问[https://leap-lab.bohrium.com](https://leap-lab.bohrium.com)
 
 #### 5.3 添加设备和物料
 
@@ -306,12 +307,10 @@ unilab --ak your_ak --sk your_sk -g test/experiments/mock_devices/mock_all.json
 **示例场景：** 创建一个简单的液体转移实验
 
 1. **添加工作站（必需）：**
-
    - 在"仪器设备"中找到 `work_station`
    - 添加 `workstation` x1
 
 2. **添加虚拟转移泵：**
-
    - 在"仪器设备"中找到 `virtual_device`
    - 添加 `virtual_transfer_pump` x1
 
@@ -818,6 +817,7 @@ uv pip install -r unilabos/utils/requirements.txt
 ```
 
 **为什么使用这种方式？**
+
 - `unilabos-env` 提供 ROS2 核心组件和 uv（通过 conda 安装，避免编译）
 - `unilabos/utils/requirements.txt` 包含所有运行时需要的 pip 依赖
 - `dev_install.py` 自动检测中文环境，中文系统自动使用清华镜像
@@ -1796,32 +1796,27 @@ unilab --ak your_ak --sk your_sk -g graph.json \
 **详细步骤：**
 
 1. **需求分析**：
-
    - 明确实验流程
    - 列出所需设备和物料
    - 设计工作流程图
 
 2. **环境搭建**：
-
    - 安装 Uni-Lab-OS
    - 创建实验室账号
    - 准备开发工具（IDE、Git）
 
 3. **原型验证**：
-
    - 使用虚拟设备测试流程
    - 验证工作流逻辑
    - 调整参数
 
 4. **迭代开发**：
-
    - 实现自定义设备驱动（同时撰写单点函数测试）
    - 编写注册表
    - 单元测试
    - 集成测试
 
 5. **测试部署**：
-
    - 连接真实硬件
    - 空跑测试
    - 小规模试验
@@ -1871,7 +1866,7 @@ unilab --ak your_ak --sk your_sk -g graph.json \
 #### 14.5 社区支持
 
 - **GitHub Issues**：[https://github.com/deepmodeling/Uni-Lab-OS/issues](https://github.com/deepmodeling/Uni-Lab-OS/issues)
-- **官方网站**：[https://uni-lab.bohrium.com](https://uni-lab.bohrium.com)
+- **官方网站**：[https://leap-lab.bohrium.com](https://leap-lab.bohrium.com)
 
 ---
 

docs/user_guide/graph_files.md

@@ -626,7 +626,7 @@ unilab
 
 **云端图文件管理**:
 
-1. 登录 https://uni-lab.bohrium.com
+1. 登录 https://leap-lab.bohrium.com
 2. 进入"设备配置"
 3. 创建或编辑配置
 4. 保存到云端

docs/user_guide/launch.md

@@ -22,7 +22,6 @@ options:
   --is_slave            Run the backend as slave node (without host privileges).
   --slave_no_host       Skip waiting for host service in slave mode
   --upload_registry     Upload registry information when starting unilab
-  --use_remote_resource Use remote resources when starting unilab
   --config CONFIG       Configuration file path, supports .py format Python config files
   --port PORT           Port for web service information page
   --disable_browser     Disable opening information page on startup
@@ -55,7 +54,6 @@ Uni-Lab 的启动过程分为以下几个阶段：
 您可以直接跟随 unilabos 的提示进行，无需查阅本节
 
 - **工作目录设置**：
-
   - 如果当前目录以 `unilabos_data` 结尾，则使用当前目录
   - 否则使用 `当前目录/unilabos_data` 作为工作目录
   - 可通过 `--working_dir` 指定自定义工作目录
@@ -69,8 +67,8 @@ Uni-Lab 的启动过程分为以下几个阶段：
 
 支持多种后端环境：
 
-- `--addr test`：测试环境 (`https://uni-lab.test.bohrium.com/api/v1`)
-- `--addr uat`：UAT 环境 (`https://uni-lab.uat.bohrium.com/api/v1`)
+- `--addr test`：测试环境 (`https://leap-lab.test.bohrium.com/api/v1`)
+- `--addr uat`：UAT 环境 (`https://leap-lab.uat.bohrium.com/api/v1`)
 - `--addr local`：本地环境 (`http://127.0.0.1:48197/api/v1`)
 - 自定义地址：直接指定完整 URL
 
@@ -85,7 +83,7 @@ Uni-Lab 的启动过程分为以下几个阶段：
 支持两种方式：
 
 - **本地文件**：使用 `-g` 指定图谱文件（支持 JSON 和 GraphML 格式）
-- **远程资源**：使用 `--use_remote_resource` 从云端获取
+- **远程资源**：不指定本地文件即可
 
 ### 7. 注册表构建
 
@@ -177,7 +175,7 @@ unilab --config path/to/your/config.py
 
 如果是首次使用，系统会：
 
-1. 提示前往 https://uni-lab.bohrium.com 注册实验室
+1. 提示前往 https://leap-lab.bohrium.com 注册实验室
 2. 引导创建配置文件
 3. 设置工作目录
 
@@ -196,7 +194,7 @@ unilab --config path/to/your/config.py
 unilab --ak your_ak --sk your_sk -g path/to/graph.json --upload_registry
 
 # 使用远程资源启动
-unilab --ak your_ak --sk your_sk --use_remote_resource
+unilab --ak your_ak --sk your_sk
 
 # 更新注册表
 unilab --ak your_ak --sk your_sk --complete_registry
@@ -217,7 +215,7 @@ unilab --ak your_ak --sk your_sk --port 8080 --disable_browser
 
 如果提示 "后续运行必须拥有一个实验室"，请确保：
 
-- 已在 https://uni-lab.bohrium.com 注册实验室
+- 已在 https://leap-lab.bohrium.com 注册实验室
 - 正确设置了 `--ak` 和 `--sk` 参数
 - 配置文件中包含正确的认证信息
 

recipes/msgs/recipe.yaml

@@ -1,6 +1,6 @@
 package:
   name: ros-humble-unilabos-msgs
-  version: 0.10.18
+  version: 0.11.1
 source:
   path: ../../unilabos_msgs
   target_directory: src

recipes/unilabos/recipe.yaml

@@ -1,6 +1,6 @@
 package:
   name: unilabos
-  version: "0.10.18"
+  version: "0.11.1"
 
 source:
   path: ../..

setup.py

@@ -4,7 +4,7 @@ package_name = 'unilabos'
 
 setup(
     name=package_name,
-    version='0.10.18',
+    version='0.11.1',
     packages=find_packages(),
     include_package_data=True,
     install_requires=['setuptools'],

tests/devices/liquid_handling/README.md

@@ -1,15 +0,0 @@
-# Liquid handling 集成测试
-
-`test_transfer_liquid.py` 现在会调用 PRCXI 的 RViz 仿真 backend，运行前请确保：
-
-1. 已安装包含 `pylabrobot`、`rclpy` 的运行环境；
-2. 启动 ROS 依赖（`rviz` 可选，但是 `rviz_backend` 会创建 ROS 节点）；
-3. 在 shell 中设置 `UNILAB_SIM_TEST=1`，否则 pytest 会自动跳过这些慢速用例：
-
-```bash
-export UNILAB_SIM_TEST=1
-pytest tests/devices/liquid_handling/test_transfer_liquid.py -m slow
-```
-
-如果只需验证逻辑层（不依赖仿真），可以直接运行 `tests/devices/liquid_handling/unit_test.py`，该文件使用 Fake backend，适合作为 CI 的快速测试。***
-

tests/devices/liquid_handling/unit_test.py

@@ -1,547 +0,0 @@
-import asyncio
-from dataclasses import dataclass
-from typing import Any, Iterable, List, Optional, Sequence, Tuple
-
-import pytest
-
-from unilabos.devices.liquid_handling.liquid_handler_abstract import LiquidHandlerAbstract
-
-
-@dataclass(frozen=True)
-class DummyContainer:
-    name: str
-
-    def __repr__(self) -> str:  # pragma: no cover
-        return f"DummyContainer({self.name})"
-
-
-@dataclass(frozen=True)
-class DummyTipSpot:
-    name: str
-
-    def __repr__(self) -> str:  # pragma: no cover
-        return f"DummyTipSpot({self.name})"
-
-
-def make_tip_iter(n: int = 256) -> Iterable[List[DummyTipSpot]]:
-    """Yield lists so code can safely call `tip.extend(next(self.current_tip))`."""
-    for i in range(n):
-        yield [DummyTipSpot(f"tip_{i}")]
-
-
-class FakeLiquidHandler(LiquidHandlerAbstract):
-    """不初始化真实 backend/deck；仅用来记录 transfer_liquid 内部调用序列。"""
-
-    def __init__(self, channel_num: int = 8):
-        # 不调用 super().__init__，避免真实硬件/后端依赖
-        self.channel_num = channel_num
-        self.support_touch_tip = True
-        self.current_tip = iter(make_tip_iter())
-        self.calls: List[Tuple[str, Any]] = []
-
-    async def pick_up_tips(self, tip_spots, use_channels=None, offsets=None, **backend_kwargs):
-        self.calls.append(("pick_up_tips", {"tips": list(tip_spots), "use_channels": use_channels}))
-
-    async def aspirate(
-        self,
-        resources: Sequence[Any],
-        vols: List[float],
-        use_channels: Optional[List[int]] = None,
-        flow_rates: Optional[List[Optional[float]]] = None,
-        offsets: Any = None,
-        liquid_height: Any = None,
-        blow_out_air_volume: Any = None,
-        spread: str = "wide",
-        **backend_kwargs,
-    ):
-        self.calls.append(
-            (
-                "aspirate",
-                {
-                    "resources": list(resources),
-                    "vols": list(vols),
-                    "use_channels": list(use_channels) if use_channels is not None else None,
-                    "flow_rates": list(flow_rates) if flow_rates is not None else None,
-                    "offsets": list(offsets) if offsets is not None else None,
-                    "liquid_height": list(liquid_height) if liquid_height is not None else None,
-                    "blow_out_air_volume": list(blow_out_air_volume) if blow_out_air_volume is not None else None,
-                },
-            )
-        )
-
-    async def dispense(
-        self,
-        resources: Sequence[Any],
-        vols: List[float],
-        use_channels: Optional[List[int]] = None,
-        flow_rates: Optional[List[Optional[float]]] = None,
-        offsets: Any = None,
-        liquid_height: Any = None,
-        blow_out_air_volume: Any = None,
-        spread: str = "wide",
-        **backend_kwargs,
-    ):
-        self.calls.append(
-            (
-                "dispense",
-                {
-                    "resources": list(resources),
-                    "vols": list(vols),
-                    "use_channels": list(use_channels) if use_channels is not None else None,
-                    "flow_rates": list(flow_rates) if flow_rates is not None else None,
-                    "offsets": list(offsets) if offsets is not None else None,
-                    "liquid_height": list(liquid_height) if liquid_height is not None else None,
-                    "blow_out_air_volume": list(blow_out_air_volume) if blow_out_air_volume is not None else None,
-                },
-            )
-        )
-
-    async def discard_tips(self, use_channels=None, *args, **kwargs):
-        # 有的分支是 discard_tips(use_channels=[0])，有的分支是 discard_tips([0..7])（位置参数）
-        self.calls.append(("discard_tips", {"use_channels": list(use_channels) if use_channels is not None else None}))
-
-    async def custom_delay(self, seconds=0, msg=None):
-        self.calls.append(("custom_delay", {"seconds": seconds, "msg": msg}))
-
-    async def touch_tip(self, targets):
-        # 原实现会访问 targets.get_size_x() 等；测试里只记录调用
-        self.calls.append(("touch_tip", {"targets": targets}))
-
-def run(coro):
-    return asyncio.run(coro)
-
-
-def test_one_to_one_single_channel_basic_calls():
-  lh = FakeLiquidHandler(channel_num=1)
-  lh.current_tip = iter(make_tip_iter(64))
-
-  sources = [DummyContainer(f"S{i}") for i in range(3)]
-  targets = [DummyContainer(f"T{i}") for i in range(3)]
-
-  run(
-    lh.transfer_liquid(
-      sources=sources,
-      targets=targets,
-      tip_racks=[],
-      use_channels=[0],
-      asp_vols=[1, 2, 3],
-      dis_vols=[4, 5, 6],
-      mix_times=None,  # 应该仍能执行（不 mix）
-    )
-  )
-
-  assert [c[0] for c in lh.calls].count("pick_up_tips") == 3
-  assert [c[0] for c in lh.calls].count("aspirate") == 3
-  assert [c[0] for c in lh.calls].count("dispense") == 3
-  assert [c[0] for c in lh.calls].count("discard_tips") == 3
-
-  # 每次 aspirate/dispense 都是单孔列表
-  aspirates = [payload for name, payload in lh.calls if name == "aspirate"]
-  assert aspirates[0]["resources"] == [sources[0]]
-  assert aspirates[0]["vols"] == [1.0]
-
-  dispenses = [payload for name, payload in lh.calls if name == "dispense"]
-  assert dispenses[2]["resources"] == [targets[2]]
-  assert dispenses[2]["vols"] == [6.0]
-
-
-def test_one_to_one_single_channel_before_stage_mixes_prior_to_aspirate():
-  lh = FakeLiquidHandler(channel_num=1)
-  lh.current_tip = iter(make_tip_iter(16))
-
-  source = DummyContainer("S0")
-  target = DummyContainer("T0")
-
-  run(
-    lh.transfer_liquid(
-      sources=[source],
-      targets=[target],
-      tip_racks=[],
-      use_channels=[0],
-      asp_vols=[5],
-      dis_vols=[5],
-      mix_stage="before",
-      mix_times=1,
-      mix_vol=3,
-    )
-  )
-
-  aspirate_calls = [(idx, payload) for idx, (name, payload) in enumerate(lh.calls) if name == "aspirate"]
-  assert len(aspirate_calls) >= 2
-  mix_idx, mix_payload = aspirate_calls[0]
-  assert mix_payload["resources"] == [target]
-  assert mix_payload["vols"] == [3]
-  transfer_idx, transfer_payload = aspirate_calls[1]
-  assert transfer_payload["resources"] == [source]
-  assert mix_idx < transfer_idx
-
-
-def test_one_to_one_eight_channel_groups_by_8():
-  lh = FakeLiquidHandler(channel_num=8)
-  lh.current_tip = iter(make_tip_iter(256))
-
-  sources = [DummyContainer(f"S{i}") for i in range(16)]
-  targets = [DummyContainer(f"T{i}") for i in range(16)]
-  asp_vols = list(range(1, 17))
-  dis_vols = list(range(101, 117))
-
-  run(
-    lh.transfer_liquid(
-      sources=sources,
-      targets=targets,
-      tip_racks=[],
-      use_channels=list(range(8)),
-      asp_vols=asp_vols,
-      dis_vols=dis_vols,
-      mix_times=0,  # 触发逻辑但不 mix
-    )
-  )
-
-  # 16 个任务 -> 2 组，每组 8 通道一起做
-  assert [c[0] for c in lh.calls].count("pick_up_tips") == 2
-  aspirates = [payload for name, payload in lh.calls if name == "aspirate"]
-  dispenses = [payload for name, payload in lh.calls if name == "dispense"]
-  assert len(aspirates) == 2
-  assert len(dispenses) == 2
-
-  assert aspirates[0]["resources"] == sources[0:8]
-  assert aspirates[0]["vols"] == [float(v) for v in asp_vols[0:8]]
-  assert dispenses[1]["resources"] == targets[8:16]
-  assert dispenses[1]["vols"] == [float(v) for v in dis_vols[8:16]]
-
-
-def test_one_to_one_eight_channel_requires_multiple_of_8_targets():
-  lh = FakeLiquidHandler(channel_num=8)
-  lh.current_tip = iter(make_tip_iter(64))
-
-  sources = [DummyContainer(f"S{i}") for i in range(9)]
-  targets = [DummyContainer(f"T{i}") for i in range(9)]
-
-  with pytest.raises(ValueError, match="multiple of 8"):
-    run(
-      lh.transfer_liquid(
-        sources=sources,
-        targets=targets,
-        tip_racks=[],
-        use_channels=list(range(8)),
-        asp_vols=[1] * 9,
-        dis_vols=[1] * 9,
-        mix_times=0,
-      )
-    )
-
-
-def test_one_to_one_eight_channel_parameter_lists_are_chunked_per_8():
-  lh = FakeLiquidHandler(channel_num=8)
-  lh.current_tip = iter(make_tip_iter(512))
-
-  sources = [DummyContainer(f"S{i}") for i in range(16)]
-  targets = [DummyContainer(f"T{i}") for i in range(16)]
-  asp_vols = [i + 1 for i in range(16)]
-  dis_vols = [200 + i for i in range(16)]
-  asp_flow_rates = [0.1 * (i + 1) for i in range(16)]
-  dis_flow_rates = [0.2 * (i + 1) for i in range(16)]
-  offsets = [f"offset_{i}" for i in range(16)]
-  liquid_heights = [i * 0.5 for i in range(16)]
-  blow_out_air_volume = [i + 0.05 for i in range(16)]
-
-  run(
-    lh.transfer_liquid(
-      sources=sources,
-      targets=targets,
-      tip_racks=[],
-      use_channels=list(range(8)),
-      asp_vols=asp_vols,
-      dis_vols=dis_vols,
-      asp_flow_rates=asp_flow_rates,
-      dis_flow_rates=dis_flow_rates,
-      offsets=offsets,
-      liquid_height=liquid_heights,
-      blow_out_air_volume=blow_out_air_volume,
-      mix_times=0,
-    )
-  )
-
-  aspirates = [payload for name, payload in lh.calls if name == "aspirate"]
-  dispenses = [payload for name, payload in lh.calls if name == "dispense"]
-  assert len(aspirates) == len(dispenses) == 2
-
-  for batch_idx in range(2):
-    start = batch_idx * 8
-    end = start + 8
-    asp_call = aspirates[batch_idx]
-    dis_call = dispenses[batch_idx]
-    assert asp_call["resources"] == sources[start:end]
-    assert asp_call["flow_rates"] == asp_flow_rates[start:end]
-    assert asp_call["offsets"] == offsets[start:end]
-    assert asp_call["liquid_height"] == liquid_heights[start:end]
-    assert asp_call["blow_out_air_volume"] == blow_out_air_volume[start:end]
-    assert dis_call["flow_rates"] == dis_flow_rates[start:end]
-    assert dis_call["offsets"] == offsets[start:end]
-    assert dis_call["liquid_height"] == liquid_heights[start:end]
-    assert dis_call["blow_out_air_volume"] == blow_out_air_volume[start:end]
-
-
-def test_one_to_one_eight_channel_handles_32_tasks_four_batches():
-  lh = FakeLiquidHandler(channel_num=8)
-  lh.current_tip = iter(make_tip_iter(1024))
-
-  sources = [DummyContainer(f"S{i}") for i in range(32)]
-  targets = [DummyContainer(f"T{i}") for i in range(32)]
-  asp_vols = [i + 1 for i in range(32)]
-  dis_vols = [300 + i for i in range(32)]
-
-  run(
-    lh.transfer_liquid(
-      sources=sources,
-      targets=targets,
-      tip_racks=[],
-      use_channels=list(range(8)),
-      asp_vols=asp_vols,
-      dis_vols=dis_vols,
-      mix_times=0,
-    )
-  )
-
-  pick_calls = [name for name, _ in lh.calls if name == "pick_up_tips"]
-  aspirates = [payload for name, payload in lh.calls if name == "aspirate"]
-  dispenses = [payload for name, payload in lh.calls if name == "dispense"]
-  assert len(pick_calls) == 4
-  assert len(aspirates) == len(dispenses) == 4
-  assert aspirates[0]["resources"] == sources[0:8]
-  assert aspirates[-1]["resources"] == sources[24:32]
-  assert dispenses[0]["resources"] == targets[0:8]
-  assert dispenses[-1]["resources"] == targets[24:32]
-
-
-def test_one_to_many_single_channel_aspirates_total_when_asp_vol_too_small():
-  lh = FakeLiquidHandler(channel_num=1)
-  lh.current_tip = iter(make_tip_iter(64))
-
-  source = DummyContainer("SRC")
-  targets = [DummyContainer(f"T{i}") for i in range(3)]
-  dis_vols = [10, 20, 30]  # sum=60
-
-  run(
-    lh.transfer_liquid(
-      sources=[source],
-      targets=targets,
-      tip_racks=[],
-      use_channels=[0],
-      asp_vols=10,  # 小于 sum(dis_vols) -> 应吸 60
-      dis_vols=dis_vols,
-      mix_times=0,
-    )
-  )
-
-  aspirates = [payload for name, payload in lh.calls if name == "aspirate"]
-  assert len(aspirates) == 1
-  assert aspirates[0]["resources"] == [source]
-  assert aspirates[0]["vols"] == [60.0]
-  assert aspirates[0]["use_channels"] == [0]
-  dispenses = [payload for name, payload in lh.calls if name == "dispense"]
-  assert [d["vols"][0] for d in dispenses] == [10.0, 20.0, 30.0]
-
-
-def test_one_to_many_eight_channel_basic():
-  lh = FakeLiquidHandler(channel_num=8)
-  lh.current_tip = iter(make_tip_iter(128))
-
-  source = DummyContainer("SRC")
-  targets = [DummyContainer(f"T{i}") for i in range(8)]
-  dis_vols = [i + 1 for i in range(8)]
-
-  run(
-    lh.transfer_liquid(
-      sources=[source],
-      targets=targets,
-      tip_racks=[],
-      use_channels=list(range(8)),
-      asp_vols=999,  # one-to-many 8ch 会按 dis_vols 吸（每通道各自）
-      dis_vols=dis_vols,
-      mix_times=0,
-    )
-  )
-
-  aspirates = [payload for name, payload in lh.calls if name == "aspirate"]
-  assert aspirates[0]["resources"] == [source] * 8
-  assert aspirates[0]["vols"] == [float(v) for v in dis_vols]
-  dispenses = [payload for name, payload in lh.calls if name == "dispense"]
-  assert dispenses[0]["resources"] == targets
-  assert dispenses[0]["vols"] == [float(v) for v in dis_vols]
-
-
-def test_many_to_one_single_channel_standard_dispense_equals_asp_by_default():
-  lh = FakeLiquidHandler(channel_num=1)
-  lh.current_tip = iter(make_tip_iter(128))
-
-  sources = [DummyContainer(f"S{i}") for i in range(3)]
-  target = DummyContainer("T")
-  asp_vols = [5, 6, 7]
-
-  run(
-    lh.transfer_liquid(
-      sources=sources,
-      targets=[target],
-      tip_racks=[],
-      use_channels=[0],
-      asp_vols=asp_vols,
-      dis_vols=1,  # many-to-one 允许标量；非比例模式下实际每次分液=对应 asp_vol
-      mix_times=0,
-    )
-  )
-
-  dispenses = [payload for name, payload in lh.calls if name == "dispense"]
-  assert [d["vols"][0] for d in dispenses] == [float(v) for v in asp_vols]
-  assert all(d["resources"] == [target] for d in dispenses)
-
-
-def test_many_to_one_single_channel_before_stage_mixes_target_once():
-  lh = FakeLiquidHandler(channel_num=1)
-  lh.current_tip = iter(make_tip_iter(128))
-
-  sources = [DummyContainer("S0"), DummyContainer("S1")]
-  target = DummyContainer("T")
-
-  run(
-    lh.transfer_liquid(
-      sources=sources,
-      targets=[target],
-      tip_racks=[],
-      use_channels=[0],
-      asp_vols=[5, 6],
-      dis_vols=1,
-      mix_stage="before",
-      mix_times=2,
-      mix_vol=4,
-    )
-  )
-
-  aspirate_calls = [(idx, payload) for idx, (name, payload) in enumerate(lh.calls) if name == "aspirate"]
-  assert len(aspirate_calls) >= 1
-  mix_idx, mix_payload = aspirate_calls[0]
-  assert mix_payload["resources"] == [target]
-  assert mix_payload["vols"] == [4]
-  # 第一個 mix 之後會真正開始吸 source
-  assert any(call["resources"] == [sources[0]] for _, call in aspirate_calls[1:])
-
-
-def test_many_to_one_single_channel_proportional_mixing_uses_dis_vols_per_source():
-  lh = FakeLiquidHandler(channel_num=1)
-  lh.current_tip = iter(make_tip_iter(128))
-
-  sources = [DummyContainer(f"S{i}") for i in range(3)]
-  target = DummyContainer("T")
-  asp_vols = [5, 6, 7]
-  dis_vols = [1, 2, 3]
-
-  run(
-    lh.transfer_liquid(
-      sources=sources,
-      targets=[target],
-      tip_racks=[],
-      use_channels=[0],
-      asp_vols=asp_vols,
-      dis_vols=dis_vols,  # 比例模式
-      mix_times=0,
-    )
-  )
-
-  dispenses = [payload for name, payload in lh.calls if name == "dispense"]
-  assert [d["vols"][0] for d in dispenses] == [float(v) for v in dis_vols]
-
-
-def test_many_to_one_eight_channel_basic():
-  lh = FakeLiquidHandler(channel_num=8)
-  lh.current_tip = iter(make_tip_iter(256))
-
-  sources = [DummyContainer(f"S{i}") for i in range(8)]
-  target = DummyContainer("T")
-  asp_vols = [10 + i for i in range(8)]
-
-  run(
-    lh.transfer_liquid(
-      sources=sources,
-      targets=[target],
-      tip_racks=[],
-      use_channels=list(range(8)),
-      asp_vols=asp_vols,
-      dis_vols=999,  # 非比例模式下每通道分液=对应 asp_vol
-      mix_times=0,
-    )
-  )
-
-  aspirates = [payload for name, payload in lh.calls if name == "aspirate"]
-  dispenses = [payload for name, payload in lh.calls if name == "dispense"]
-  assert aspirates[0]["resources"] == sources
-  assert aspirates[0]["vols"] == [float(v) for v in asp_vols]
-  assert dispenses[0]["resources"] == [target] * 8
-  assert dispenses[0]["vols"] == [float(v) for v in asp_vols]
-
-
-def test_transfer_liquid_mode_detection_unsupported_shape_raises():
-  lh = FakeLiquidHandler(channel_num=8)
-  lh.current_tip = iter(make_tip_iter(64))
-
-  sources = [DummyContainer("S0"), DummyContainer("S1")]
-  targets = [DummyContainer("T0"), DummyContainer("T1"), DummyContainer("T2")]
-
-  with pytest.raises(ValueError, match="Unsupported transfer mode"):
-    run(
-      lh.transfer_liquid(
-        sources=sources,
-        targets=targets,
-        tip_racks=[],
-        use_channels=[0],
-        asp_vols=[1, 1],
-        dis_vols=[1, 1, 1],
-        mix_times=0,
-      )
-    )
-
-
-def test_mix_single_target_produces_matching_cycles():
-  lh = FakeLiquidHandler(channel_num=1)
-  target = DummyContainer("T_mix")
-
-  run(lh.mix(targets=[target], mix_time=2, mix_vol=5))
-
-  aspirates = [payload for name, payload in lh.calls if name == "aspirate"]
-  dispenses = [payload for name, payload in lh.calls if name == "dispense"]
-  assert len(aspirates) == len(dispenses) == 2
-  assert all(call["resources"] == [target] for call in aspirates)
-  assert all(call["vols"] == [5] for call in aspirates)
-  assert all(call["resources"] == [target] for call in dispenses)
-  assert all(call["vols"] == [5] for call in dispenses)
-
-
-def test_mix_multiple_targets_supports_per_target_offsets():
-  lh = FakeLiquidHandler(channel_num=1)
-  targets = [DummyContainer("T0"), DummyContainer("T1")]
-  offsets = ["left", "right"]
-  heights = [0.1, 0.2]
-  rates = [0.5, 1.0]
-
-  run(
-    lh.mix(
-      targets=targets,
-      mix_time=1,
-      mix_vol=3,
-      offsets=offsets,
-      height_to_bottom=heights,
-      mix_rate=rates,
-    )
-  )
-
-  aspirates = [payload for name, payload in lh.calls if name == "aspirate"]
-  assert len(aspirates) == 2
-  assert aspirates[0]["resources"] == [targets[0]]
-  assert aspirates[0]["offsets"] == [offsets[0]]
-  assert aspirates[0]["liquid_height"] == [heights[0]]
-  assert aspirates[0]["flow_rates"] == [rates[0]]
-  assert aspirates[1]["resources"] == [targets[1]]
-  assert aspirates[1]["offsets"] == [offsets[1]]
-  assert aspirates[1]["liquid_height"] == [heights[1]]
-  assert aspirates[1]["flow_rates"] == [rates[1]]
-
-

unilabos/__init__.py

@@ -1 +1 @@
-__version__ = "0.10.18"
+__version__ = "0.11.1"

unilabos/__main__.py

@@ -0,0 +1,6 @@
+"""Entry point for `python -m unilabos`."""
+
+from unilabos.app.main import main
+
+if __name__ == "__main__":
+    main()

unilabos/app/main.py

@@ -4,6 +4,7 @@ import os
 import platform
 import shutil
 import signal
+import subprocess
 import sys
 import threading
 import time
@@ -11,6 +12,15 @@ from typing import Dict, Any, List
 import networkx as nx
 import yaml
 
+# Windows 中文系统 stdout 默认 GBK，无法编码 banner / emoji 日志中的 Unicode 字符
+# 强制 stdout/stderr 用 UTF-8，避免 print 触发 UnicodeEncodeError 导致进程崩溃
+if sys.platform == "win32":
+    for _stream in (sys.stdout, sys.stderr):
+        try:
+            _stream.reconfigure(encoding="utf-8", errors="replace")  # type: ignore[attr-defined]
+        except (AttributeError, OSError):
+            pass
+
 # 首先添加项目根目录到路径
 current_dir = os.path.dirname(os.path.abspath(__file__))
 unilabos_dir = os.path.dirname(os.path.dirname(current_dir))
@@ -25,6 +35,84 @@ from unilabos.config.config import load_config, BasicConfig, HTTPConfig
 _restart_requested: bool = False
 _restart_reason: str = ""
 
+RESTART_EXIT_CODE = 42
+
+
+def _build_child_argv():
+    """Build sys.argv for child process, stripping supervisor-only arguments."""
+    result = []
+    skip_next = False
+    for arg in sys.argv:
+        if skip_next:
+            skip_next = False
+            continue
+        if arg in ("--restart_mode", "--restart-mode"):
+            continue
+        if arg in ("--auto_restart_count", "--auto-restart-count"):
+            skip_next = True
+            continue
+        if arg.startswith("--auto_restart_count=") or arg.startswith("--auto-restart-count="):
+            continue
+        result.append(arg)
+    return result
+
+
+def _run_as_supervisor(max_restarts: int):
+    """
+    Supervisor process that spawns and monitors child processes.
+
+    Similar to Uvicorn's --reload: the supervisor itself does no heavy work,
+    it only launches the real process as a child and restarts it when the child
+    exits with RESTART_EXIT_CODE.
+    """
+    child_argv = [sys.executable] + _build_child_argv()
+    restart_count = 0
+
+    print_status(
+        f"[Supervisor] Restart mode enabled (max restarts: {max_restarts}), "
+        f"child command: {' '.join(child_argv)}",
+        "info",
+    )
+
+    while True:
+        print_status(
+            f"[Supervisor] Launching process (restart {restart_count}/{max_restarts})...",
+            "info",
+        )
+
+        try:
+            process = subprocess.Popen(child_argv)
+            exit_code = process.wait()
+        except KeyboardInterrupt:
+            print_status("[Supervisor] Interrupted, terminating child process...", "info")
+            process.terminate()
+            try:
+                process.wait(timeout=10)
+            except subprocess.TimeoutExpired:
+                process.kill()
+                process.wait()
+            sys.exit(1)
+
+        if exit_code == RESTART_EXIT_CODE:
+            restart_count += 1
+            if restart_count > max_restarts:
+                print_status(
+                    f"[Supervisor] Maximum restart count ({max_restarts}) reached, exiting",
+                    "warning",
+                )
+                sys.exit(1)
+            print_status(
+                f"[Supervisor] Child requested restart ({restart_count}/{max_restarts}), restarting in 2s...",
+                "info",
+            )
+            time.sleep(2)
+        else:
+            if exit_code != 0:
+                print_status(f"[Supervisor] Child exited with code {exit_code}", "warning")
+            else:
+                print_status("[Supervisor] Child exited normally", "info")
+            sys.exit(exit_code)
+
 
 def load_config_from_file(config_path):
     if config_path is None:
@@ -66,6 +154,13 @@ def parse_args():
         action="append",
         help="Path to the registry directory",
     )
+    parser.add_argument(
+        "--devices",
+        type=str,
+        default=None,
+        action="append",
+        help="Path to Python code directory for AST-based device/resource scanning",
+    )
     parser.add_argument(
         "--working_dir",
         type=str,
@@ -147,7 +242,7 @@ def parse_args():
     parser.add_argument(
         "--addr",
         type=str,
-        default="https://uni-lab.bohrium.com/api/v1",
+        default="https://leap-lab.bohrium.com/api/v1",
         help="Laboratory backend address",
     )
     parser.add_argument(
@@ -155,18 +250,18 @@ def parse_args():
         action="store_true",
         help="Skip environment dependency check on startup",
     )
-    parser.add_argument(
-        "--complete_registry",
-        action="store_true",
-        default=False,
-        help="Complete registry information",
-    )
     parser.add_argument(
         "--check_mode",
         action="store_true",
         default=False,
         help="Run in check mode for CI: validates registry imports and ensures no file changes",
     )
+    parser.add_argument(
+        "--complete_registry",
+        action="store_true",
+        default=False,
+        help="Complete and rewrite YAML registry files using AST analysis results",
+    )
     parser.add_argument(
         "--no_update_feedback",
         action="store_true",
@@ -178,6 +273,30 @@ def parse_args():
         default=False,
         help="Test mode: all actions simulate execution and return mock results without running real hardware",
     )
+    parser.add_argument(
+        "--external_devices_only",
+        action="store_true",
+        default=False,
+        help="Only load external device packages (--devices), skip built-in unilabos/devices/ scanning and YAML device registry",
+    )
+    parser.add_argument(
+        "--extra_resource",
+        action="store_true",
+        default=False,
+        help="Load extra lab_ prefixed labware resources (529 auto-generated definitions from lab_resources.py)",
+    )
+    parser.add_argument(
+        "--restart_mode",
+        action="store_true",
+        default=False,
+        help="Enable supervisor mode: automatically restart the process when triggered via WebSocket",
+    )
+    parser.add_argument(
+        "--auto_restart_count",
+        type=int,
+        default=500,
+        help="Maximum number of automatic restarts in restart mode (default: 500)",
+    )
     # workflow upload subcommand
     workflow_parser = subparsers.add_parser(
         "workflow_upload",
@@ -228,16 +347,28 @@ def main():
     args = parser.parse_args()
     args_dict = vars(args)
 
+    # Supervisor mode: spawn child processes and monitor for restart
+    if args_dict.get("restart_mode", False):
+        _run_as_supervisor(args_dict.get("auto_restart_count", 5))
+        return
+
     # 环境检查 - 检查并自动安装必需的包 (可选)
     skip_env_check = args_dict.get("skip_env_check", False)
     check_mode = args_dict.get("check_mode", False)
 
     if not skip_env_check:
-        from unilabos.utils.environment_check import check_environment
+        from unilabos.utils.environment_check import check_environment, check_device_package_requirements
 
         if not check_environment(auto_install=True):
             print_status("环境检查失败，程序退出", "error")
             os._exit(1)
+
+        # 第一次设备包依赖检查：build_registry 之前，确保 import map 可用
+        devices_dirs_for_req = args_dict.get("devices", None)
+        if devices_dirs_for_req:
+            if not check_device_package_requirements(devices_dirs_for_req):
+                print_status("设备包依赖检查失败，程序退出", "error")
+                os._exit(1)
     else:
         print_status("跳过环境依赖检查", "warning")
 
@@ -316,10 +447,10 @@ def main():
     if args.addr != parser.get_default("addr"):
         if args.addr == "test":
             print_status("使用测试环境地址", "info")
-            HTTPConfig.remote_addr = "https://uni-lab.test.bohrium.com/api/v1"
+            HTTPConfig.remote_addr = "https://leap-lab.test.bohrium.com/api/v1"
         elif args.addr == "uat":
             print_status("使用uat环境地址", "info")
-            HTTPConfig.remote_addr = "https://uni-lab.uat.bohrium.com/api/v1"
+            HTTPConfig.remote_addr = "https://leap-lab.uat.bohrium.com/api/v1"
         elif args.addr == "local":
             print_status("使用本地环境地址", "info")
             HTTPConfig.remote_addr = "http://127.0.0.1:48197/api/v1"
@@ -358,6 +489,9 @@ def main():
     BasicConfig.test_mode = args_dict.get("test_mode", False)
     if BasicConfig.test_mode:
         print_status("启用测试模式：所有动作将模拟执行，不调用真实硬件", "warning")
+    BasicConfig.extra_resource = args_dict.get("extra_resource", False)
+    if BasicConfig.extra_resource:
+        print_status("启用额外资源加载：将加载lab_开头的labware资源定义", "info")
     BasicConfig.communication_protocol = "websocket"
     machine_name = platform.node()
     machine_name = "".join([c if c.isalnum() or c == "_" else "_" for c in machine_name])
@@ -365,39 +499,53 @@ def main():
     BasicConfig.vis_2d_enable = args_dict["2d_vis"]
     BasicConfig.check_mode = check_mode
 
-    from unilabos.resources.graphio import (
-        read_node_link_json,
-        read_graphml,
-        dict_from_graph,
-    )
-    from unilabos.app.communication import get_communication_client
     from unilabos.registry.registry import build_registry
-    from unilabos.app.backend import start_backend
-    from unilabos.app.web import http_client
-    from unilabos.app.web import start_server
-    from unilabos.app.register import register_devices_and_resources
-    from unilabos.resources.graphio import modify_to_backend_format
-    from unilabos.resources.resource_tracker import ResourceTreeSet, ResourceDict
 
     # 显示启动横幅
     print_unilab_banner(args_dict)
 
-    # 注册表 - check_mode 时强制启用 complete_registry
+    # Step 0: AST 分析优先 + YAML 注册表加载
+    # check_mode 和 upload_registry 都会执行实际 import 验证
+    devices_dirs = args_dict.get("devices", None)
     complete_registry = args_dict.get("complete_registry", False) or check_mode
-    lab_registry = build_registry(args_dict["registry_path"], complete_registry, BasicConfig.upload_registry)
+    external_only = args_dict.get("external_devices_only", False)
+    lab_registry = build_registry(
+        registry_paths=args_dict["registry_path"],
+        devices_dirs=devices_dirs,
+        upload_registry=BasicConfig.upload_registry,
+        check_mode=check_mode,
+        complete_registry=complete_registry,
+        external_only=external_only,
+    )
 
-    # Check mode: complete_registry 完成后直接退出，git diff 检测由 CI workflow 执行
+    # Check mode: 注册表验证完成后直接退出
     if check_mode:
-        print_status("Check mode: complete_registry 完成，退出", "info")
+        device_count = len(lab_registry.device_type_registry)
+        resource_count = len(lab_registry.resource_type_registry)
+        print_status(f"Check mode: 注册表验证完成 ({device_count} 设备, {resource_count} 资源)，退出", "info")
         os._exit(0)
 
+    # 以下导入依赖 ROS2 环境，check_mode 已退出不需要
+    from unilabos.resources.graphio import (
+        read_node_link_json,
+        read_graphml,
+        dict_from_graph,
+        modify_to_backend_format,
+    )
+    from unilabos.app.communication import get_communication_client
+    from unilabos.app.backend import start_backend
+    from unilabos.app.web import http_client
+    from unilabos.app.web import start_server
+    from unilabos.app.register import register_devices_and_resources
+    from unilabos.resources.resource_tracker import ResourceTreeSet, ResourceDict
+
+    # Step 1: 上传全部注册表到服务端，同步保存到 unilabos_data
     if BasicConfig.upload_registry:
-        # 设备注册到服务端 - 需要 ak 和 sk
         if BasicConfig.ak and BasicConfig.sk:
-            print_status("开始注册设备到服务端...", "info")
+            # print_status("开始注册设备到服务端...", "info")
             try:
                 register_devices_and_resources(lab_registry)
-                print_status("设备注册完成", "info")
+                # print_status("设备注册完成", "info")
             except Exception as e:
                 print_status(f"设备注册失败: {e}", "error")
         else:
@@ -414,7 +562,7 @@ def main():
         os._exit(0)
 
     if not BasicConfig.ak or not BasicConfig.sk:
-        print_status("后续运行必须拥有一个实验室，请前往 https://uni-lab.bohrium.com 注册实验室！", "warning")
+        print_status("后续运行必须拥有一个实验室，请前往 https://leap-lab.bohrium.com 注册实验室！", "warning")
         os._exit(1)
     graph: nx.Graph
     resource_tree_set: ResourceTreeSet
@@ -482,12 +630,16 @@ def main():
             continue
 
     # 如果从远端获取了物料信息，则与本地物料进行同步
-    if request_startup_json and "nodes" in request_startup_json:
+    if file_path is not None and request_startup_json and "nodes" in request_startup_json:
         print_status("开始同步远端物料到本地...", "info")
         remote_tree_set = ResourceTreeSet.from_raw_dict_list(request_startup_json["nodes"])
         resource_tree_set.merge_remote_resources(remote_tree_set)
         print_status("远端物料同步完成", "info")
 
+    # 第二次设备包依赖检查：云端物料同步后，community 包可能引入新的 requirements
+    # TODO: 当 community device package 功能上线后，在这里调用
+    #   install_requirements_txt(community_pkg_path / "requirements.txt", label="community.xxx")
+
     # 使用 ResourceTreeSet 代替 list
     args_dict["resources_config"] = resource_tree_set
     args_dict["devices_config"] = resource_tree_set
@@ -579,6 +731,10 @@ def main():
             open_browser=not args_dict["disable_browser"],
             port=BasicConfig.port,
         )
+        if restart_requested:
+            print_status("[Main] Restart requested, cleaning up...", "info")
+            cleanup_for_restart()
+            os._exit(RESTART_EXIT_CODE)
 
 
 if __name__ == "__main__":

unilabos/app/register.py

@@ -1,9 +1,8 @@
-import json
 import time
-from typing import Optional, Tuple, Dict, Any
+from typing import Any, Dict, Optional, Tuple
 
 from unilabos.utils.log import logger
-from unilabos.utils.type_check import TypeEncoder
+from unilabos.utils.tools import normalize_json as _normalize_device
 
 
 def register_devices_and_resources(lab_registry, gather_only=False) -> Optional[Tuple[Dict[str, Any], Dict[str, Any]]]:
@@ -11,50 +10,63 @@ def register_devices_and_resources(lab_registry, gather_only=False) -> Optional[
     注册设备和资源到服务器（仅支持HTTP）
     """
 
-    # 注册资源信息 - 使用HTTP方式
     from unilabos.app.web.client import http_client
 
     logger.info("[UniLab Register] 开始注册设备和资源...")
 
-    # 注册设备信息
     devices_to_register = {}
     for device_info in lab_registry.obtain_registry_device_info():
-        devices_to_register[device_info["id"]] = json.loads(
-            json.dumps(device_info, ensure_ascii=False, cls=TypeEncoder)
-        )
-        logger.debug(f"[UniLab Register] 收集设备: {device_info['id']}")
+        devices_to_register[device_info["id"]] = _normalize_device(device_info)
+        logger.trace(f"[UniLab Register] 收集设备: {device_info['id']}")
 
     resources_to_register = {}
     for resource_info in lab_registry.obtain_registry_resource_info():
         resources_to_register[resource_info["id"]] = resource_info
-        logger.debug(f"[UniLab Register] 收集资源: {resource_info['id']}")
+        logger.trace(f"[UniLab Register] 收集资源: {resource_info['id']}")
 
     if gather_only:
         return devices_to_register, resources_to_register
-    # 注册设备
+
     if devices_to_register:
         try:
             start_time = time.time()
-            response = http_client.resource_registry({"resources": list(devices_to_register.values())})
+            response = http_client.resource_registry(
+                {"resources": list(devices_to_register.values())},
+                tag="device_registry",
+            )
             cost_time = time.time() - start_time
-            if response.status_code in [200, 201]:
-                logger.info(f"[UniLab Register] 成功注册 {len(devices_to_register)} 个设备 {cost_time}s")
+            res_data = response.json() if response.status_code == 200 else {}
+            skipped = res_data.get("data", {}).get("skipped", False)
+            if skipped:
+                logger.info(
+                    f"[UniLab Register] 设备注册跳过（内容未变化）"
+                    f" {len(devices_to_register)} 个 {cost_time:.3f}s"
+                )
+            elif response.status_code in [200, 201]:
+                logger.info(f"[UniLab Register] 成功注册 {len(devices_to_register)} 个设备 {cost_time:.3f}s")
             else:
-                logger.error(f"[UniLab Register] 设备注册失败: {response.status_code}, {response.text} {cost_time}s")
+                logger.error(f"[UniLab Register] 设备注册失败: {response.status_code}, {response.text} {cost_time:.3f}s")
         except Exception as e:
             logger.error(f"[UniLab Register] 设备注册异常: {e}")
 
-    # 注册资源
     if resources_to_register:
         try:
             start_time = time.time()
-            response = http_client.resource_registry({"resources": list(resources_to_register.values())})
+            response = http_client.resource_registry(
+                {"resources": list(resources_to_register.values())},
+                tag="resource_registry",
+            )
             cost_time = time.time() - start_time
-            if response.status_code in [200, 201]:
-                logger.info(f"[UniLab Register] 成功注册 {len(resources_to_register)} 个资源 {cost_time}s")
+            res_data = response.json() if response.status_code == 200 else {}
+            skipped = res_data.get("data", {}).get("skipped", False)
+            if skipped:
+                logger.info(
+                    f"[UniLab Register] 资源注册跳过（内容未变化）"
+                    f" {len(resources_to_register)} 个 {cost_time:.3f}s"
+                )
+            elif response.status_code in [200, 201]:
+                logger.info(f"[UniLab Register] 成功注册 {len(resources_to_register)} 个资源 {cost_time:.3f}s")
             else:
-                logger.error(f"[UniLab Register] 资源注册失败: {response.status_code}, {response.text} {cost_time}s")
+                logger.error(f"[UniLab Register] 资源注册失败: {response.status_code}, {response.text} {cost_time:.3f}s")
         except Exception as e:
             logger.error(f"[UniLab Register] 资源注册异常: {e}")
-
-    logger.info("[UniLab Register] 设备和资源注册完成.")

unilabos/app/web/api.py

@@ -1052,7 +1052,7 @@ async def handle_file_import(websocket: WebSocket, request_data: dict):
                                 "result": {},
                                 "schema": lab_registry._generate_unilab_json_command_schema(v["args"], k),
                                 "goal_default": {i["name"]: i["default"] for i in v["args"]},
-                                "handles": [],
+                                "handles": {},
                             }
                             # 不生成已配置action的动作
                             for k, v in enhanced_info["action_methods"].items()
@@ -1340,5 +1340,5 @@ def setup_api_routes(app):
     # 启动广播任务
     @app.on_event("startup")
     async def startup_event():
-        asyncio.create_task(broadcast_device_status())
-        asyncio.create_task(broadcast_status_page_data())
+        asyncio.create_task(broadcast_device_status(), name="web-api-startup-device")
+        asyncio.create_task(broadcast_status_page_data(), name="web-api-startup-status")

unilabos/app/web/client.py

@@ -3,11 +3,13 @@ HTTP客户端模块
 
 提供与远程服务器通信的客户端功能，只有host需要用
 """
-
+import gzip
 import json
 import os
 from typing import List, Dict, Any, Optional
 
+from unilabos.utils.tools import fast_dumps as _fast_dumps, fast_dumps_pretty as _fast_dumps_pretty
+
 import requests
 from unilabos.resources.resource_tracker import ResourceTreeSet
 from unilabos.utils.log import info
@@ -34,6 +36,9 @@ class HTTPClient:
             auth_secret = BasicConfig.auth_secret()
             self.auth = auth_secret
             info(f"正在使用ak sk作为授权信息：[{auth_secret}]")
+        # 复用 TCP/TLS 连接，避免每次请求重新握手
+        self._session = requests.Session()
+        self._session.headers.update({"Authorization": f"Lab {self.auth}"})
         info(f"HTTPClient 初始化完成: remote_addr={self.remote_addr}")
 
     def resource_edge_add(self, resources: List[Dict[str, Any]]) -> requests.Response:
@@ -46,7 +51,7 @@ class HTTPClient:
         Returns:
             Response: API响应对象
         """
-        response = requests.post(
+        response = self._session.post(
             f"{self.remote_addr}/edge/material/edge",
             json={
                 "edges": resources,
@@ -73,25 +78,28 @@ class HTTPClient:
         Returns:
             Dict[str, str]: 旧UUID到新UUID的映射关系 {old_uuid: new_uuid}
         """
-        with open(os.path.join(BasicConfig.working_dir, "req_resource_tree_add.json"), "w", encoding="utf-8") as f:
-            payload = {"nodes": [x for xs in resources.dump() for x in xs], "mount_uuid": mount_uuid}
-            f.write(json.dumps(payload, indent=4))
-        # 从序列化数据中提取所有节点的UUID（保存旧UUID）
+        # dump() 只调用一次，复用给文件保存和 HTTP 请求
+        nodes_info = [x for xs in resources.dump() for x in xs]
         old_uuids = {n.res_content.uuid: n for n in resources.all_nodes}
+        payload = {"nodes": nodes_info, "mount_uuid": mount_uuid}
+        body_bytes = _fast_dumps(payload)
+        with open(os.path.join(BasicConfig.working_dir, "req_resource_tree_add.json"), "wb") as f:
+            f.write(_fast_dumps_pretty(payload))
+        http_headers = {"Content-Type": "application/json"}
         if not self.initialized or first_add:
             self.initialized = True
             info(f"首次添加资源，当前远程地址: {self.remote_addr}")
-            response = requests.post(
+            response = self._session.post(
                 f"{self.remote_addr}/edge/material",
-                json={"nodes": [x for xs in resources.dump() for x in xs], "mount_uuid": mount_uuid},
-                headers={"Authorization": f"Lab {self.auth}"},
+                data=body_bytes,
+                headers=http_headers,
                 timeout=60,
             )
         else:
-            response = requests.put(
+            response = self._session.put(
                 f"{self.remote_addr}/edge/material",
-                json={"nodes": [x for xs in resources.dump() for x in xs], "mount_uuid": mount_uuid},
-                headers={"Authorization": f"Lab {self.auth}"},
+                data=body_bytes,
+                headers=http_headers,
                 timeout=10,
             )
 
@@ -109,6 +117,7 @@ class HTTPClient:
                     uuid_mapping[i["uuid"]] = i["cloud_uuid"]
         else:
             logger.error(f"添加物料失败: {response.text}")
+            logger.trace(f"添加物料失败: {nodes_info}")
         for u, n in old_uuids.items():
             if u in uuid_mapping:
                 n.res_content.uuid = uuid_mapping[u]
@@ -129,7 +138,7 @@ class HTTPClient:
         """
         with open(os.path.join(BasicConfig.working_dir, "req_resource_tree_get.json"), "w", encoding="utf-8") as f:
             f.write(json.dumps({"uuids": uuid_list, "with_children": with_children}, indent=4))
-        response = requests.post(
+        response = self._session.post(
             f"{self.remote_addr}/edge/material/query",
             json={"uuids": uuid_list, "with_children": with_children},
             headers={"Authorization": f"Lab {self.auth}"},
@@ -143,6 +152,7 @@ class HTTPClient:
                 logger.error(f"查询物料失败: {response.text}")
             else:
                 data = res["data"]["nodes"]
+                logger.trace(f"resource_tree_get查询到物料: {data}")
                 return data
         else:
             logger.error(f"查询物料失败: {response.text}")
@@ -160,14 +170,14 @@ class HTTPClient:
         if not self.initialized:
             self.initialized = True
             info(f"首次添加资源，当前远程地址: {self.remote_addr}")
-            response = requests.post(
+            response = self._session.post(
                 f"{self.remote_addr}/lab/material",
                 json={"nodes": resources},
                 headers={"Authorization": f"Lab {self.auth}"},
                 timeout=100,
             )
         else:
-            response = requests.put(
+            response = self._session.put(
                 f"{self.remote_addr}/lab/material",
                 json={"nodes": resources},
                 headers={"Authorization": f"Lab {self.auth}"},
@@ -194,7 +204,7 @@ class HTTPClient:
         """
         with open(os.path.join(BasicConfig.working_dir, "req_resource_get.json"), "w", encoding="utf-8") as f:
             f.write(json.dumps({"id": id, "with_children": with_children}, indent=4))
-        response = requests.get(
+        response = self._session.get(
             f"{self.remote_addr}/lab/material",
             params={"id": id, "with_children": with_children},
             headers={"Authorization": f"Lab {self.auth}"},
@@ -235,14 +245,14 @@ class HTTPClient:
         if not self.initialized:
             self.initialized = True
             info(f"首次添加资源，当前远程地址: {self.remote_addr}")
-            response = requests.post(
+            response = self._session.post(
                 f"{self.remote_addr}/lab/material",
                 json={"nodes": resources},
                 headers={"Authorization": f"Lab {self.auth}"},
                 timeout=100,
             )
         else:
-            response = requests.put(
+            response = self._session.put(
                 f"{self.remote_addr}/lab/material",
                 json={"nodes": resources},
                 headers={"Authorization": f"Lab {self.auth}"},
@@ -272,7 +282,7 @@ class HTTPClient:
         with open(file_path, "rb") as file:
             files = {"files": file}
             logger.info(f"上传文件: {file_path} 到 {scene}")
-            response = requests.post(
+            response = self._session.post(
                 f"{self.remote_addr}/api/account/file_upload/{scene}",
                 files=files,
                 headers={"Authorization": f"Lab {self.auth}"},
@@ -280,22 +290,54 @@ class HTTPClient:
             )
         return response
 
-    def resource_registry(self, registry_data: Dict[str, Any] | List[Dict[str, Any]]) -> requests.Response:
+    def resource_registry(
+        self, registry_data: Dict[str, Any] | List[Dict[str, Any]], tag: str = "registry",
+    ) -> requests.Response:
         """
-        注册资源到服务器
+        注册资源到服务器，同步保存请求/响应到 unilabos_data
 
         Args:
             registry_data: 注册表数据，格式为 {resource_id: resource_info} / [{resource_info}]
+            tag: 保存文件的标签后缀 (如 "device_registry" / "resource_registry")
 
         Returns:
             Response: API响应对象
         """
-        response = requests.post(
+        # 序列化一次，同时用于保存和发送
+        json_bytes = _fast_dumps(registry_data)
+
+        # 保存请求数据到 unilabos_data
+        req_path = os.path.join(BasicConfig.working_dir, f"req_{tag}_upload.json")
+        try:
+            os.makedirs(BasicConfig.working_dir, exist_ok=True)
+            with open(req_path, "wb") as f:
+                f.write(_fast_dumps_pretty(registry_data))
+            logger.trace(f"注册表请求数据已保存: {req_path}")
+        except Exception as e:
+            logger.warning(f"保存注册表请求数据失败: {e}")
+
+        compressed_body = gzip.compress(json_bytes)
+        headers = {
+            "Authorization": f"Lab {self.auth}",
+            "Content-Type": "application/json",
+            "Content-Encoding": "gzip",
+        }
+        response = self._session.post(
             f"{self.remote_addr}/lab/resource",
-            json=registry_data,
-            headers={"Authorization": f"Lab {self.auth}"},
+            data=compressed_body,
+            headers=headers,
             timeout=30,
         )
+
+        # 保存响应数据到 unilabos_data
+        res_path = os.path.join(BasicConfig.working_dir, f"res_{tag}_upload.json")
+        try:
+            with open(res_path, "w", encoding="utf-8") as f:
+                f.write(f"{response.status_code}\n{response.text}")
+            logger.trace(f"注册表响应数据已保存: {res_path}")
+        except Exception as e:
+            logger.warning(f"保存注册表响应数据失败: {e}")
+
         if response.status_code not in [200, 201]:
             logger.error(f"注册资源失败: {response.status_code}, {response.text}")
         if response.status_code == 200:
@@ -314,7 +356,7 @@ class HTTPClient:
         Returns:
             Response: API响应对象
         """
-        response = requests.get(
+        response = self._session.get(
             f"{self.remote_addr}/edge/material/download",
             headers={"Authorization": f"Lab {self.auth}"},
             timeout=(3, 30),
@@ -375,7 +417,7 @@ class HTTPClient:
         with open(os.path.join(BasicConfig.working_dir, "req_workflow_upload.json"), "w", encoding="utf-8") as f:
             f.write(json.dumps(payload, indent=4, ensure_ascii=False))
 
-        response = requests.post(
+        response = self._session.post(
             f"{self.remote_addr}/lab/workflow/owner/import",
             json=payload,
             headers={"Authorization": f"Lab {self.auth}"},

unilabos/app/web/controller.py

@@ -58,14 +58,14 @@ class JobResultStore:
                 feedback=feedback or {},
                 timestamp=time.time(),
             )
-            logger.debug(f"[JobResultStore] Stored result for job {job_id[:8]}, status={status}")
+            logger.trace(f"[JobResultStore] Stored result for job {job_id[:8]}, status={status}")
 
     def get_and_remove(self, job_id: str) -> Optional[JobResult]:
         """获取并删除任务结果"""
         with self._results_lock:
             result = self._results.pop(job_id, None)
             if result:
-                logger.debug(f"[JobResultStore] Retrieved and removed result for job {job_id[:8]}")
+                logger.trace(f"[JobResultStore] Retrieved and removed result for job {job_id[:8]}")
             return result
 
     def get_result(self, job_id: str) -> Optional[JobResult]:

unilabos/app/web/server.py

@@ -86,7 +86,7 @@ def setup_server() -> FastAPI:
     # 设置页面路由
     try:
         setup_web_pages(pages)
-        info("[Web] 已加载Web UI模块")
+        # info("[Web] 已加载Web UI模块")
     except ImportError as e:
         info(f"[Web] 未找到Web页面模块: {str(e)}")
     except Exception as e:
@@ -138,7 +138,7 @@ def start_server(host: str = "0.0.0.0", port: int = 8002, open_browser: bool = T
     server_thread = threading.Thread(target=server.run, daemon=True, name="uvicorn_server")
     server_thread.start()
 
-    info("[Web] Server started, monitoring for restart requests...")
+    # info("[Web] Server started, monitoring for restart requests...")
 
     # 监控重启标志
     import unilabos.app.main as main_module

unilabos/app/ws_client.py

@@ -23,9 +23,10 @@ from typing import Optional, Dict, Any, List
 from urllib.parse import urlparse
 from enum import Enum
 
-from jedi.inference.gradual.typing import TypedDict
+from typing_extensions import TypedDict
 
 from unilabos.app.model import JobAddReq
+from unilabos.resources.resource_tracker import ResourceDictType
 from unilabos.ros.nodes.presets.host_node import HostNode
 from unilabos.utils.type_check import serialize_result_info
 from unilabos.app.communication import BaseCommunicationClient
@@ -164,7 +165,7 @@ class DeviceActionManager:
             job_info.set_ready_timeout(10)  # 设置10秒超时
             self.active_jobs[device_key] = job_info
             job_log = format_job_log(job_info.job_id, job_info.task_id, job_info.device_id, job_info.action_name)
-            logger.info(f"[DeviceActionManager] Job {job_log} can start immediately for {device_key}")
+            logger.trace(f"[DeviceActionManager] Job {job_log} can start immediately for {device_key}")
             return True
 
     def start_job(self, job_id: str) -> bool:
@@ -231,8 +232,9 @@ class DeviceActionManager:
                 job_info.update_timestamp()
                 # 从all_jobs中移除已结束的job
                 del self.all_jobs[job_id]
-                job_log = format_job_log(job_info.job_id, job_info.task_id, job_info.device_id, job_info.action_name)
-                logger.info(f"[DeviceActionManager] Job {job_log} ended for {device_key}")
+                # job_log = format_job_log(job_info.job_id, job_info.task_id, job_info.device_id, job_info.action_name)
+                # logger.debug(f"[DeviceActionManager] Job {job_log} ended for {device_key}")
+                pass
             else:
                 job_log = format_job_log(job_info.job_id, job_info.task_id, job_info.device_id, job_info.action_name)
                 logger.warning(f"[DeviceActionManager] Job {job_log} was not active for {device_key}")
@@ -248,7 +250,7 @@ class DeviceActionManager:
                 next_job_log = format_job_log(
                     next_job.job_id, next_job.task_id, next_job.device_id, next_job.action_name
                 )
-                logger.info(f"[DeviceActionManager] Next job {next_job_log} can start for {device_key}")
+                logger.trace(f"[DeviceActionManager] Next job {next_job_log} can start for {device_key}")
                 return next_job
 
             return None
@@ -302,7 +304,7 @@ class DeviceActionManager:
                 # 从all_jobs中移除
                 del self.all_jobs[job_id]
                 job_log = format_job_log(job_info.job_id, job_info.task_id, job_info.device_id, job_info.action_name)
-                logger.info(f"[DeviceActionManager] Active job {job_log} cancelled for {device_key}")
+                logger.trace(f"[DeviceActionManager] Active job {job_log} cancelled for {device_key}")
 
                 # 启动下一个任务
                 if device_key in self.device_queues and self.device_queues[device_key]:
@@ -315,7 +317,7 @@ class DeviceActionManager:
                     next_job_log = format_job_log(
                         next_job.job_id, next_job.task_id, next_job.device_id, next_job.action_name
                     )
-                    logger.info(f"[DeviceActionManager] Next job {next_job_log} can start after cancel")
+                    logger.trace(f"[DeviceActionManager] Next job {next_job_log} can start after cancel")
                 return True
 
             # 如果是排队中的任务
@@ -329,7 +331,7 @@ class DeviceActionManager:
                     job_log = format_job_log(
                         job_info.job_id, job_info.task_id, job_info.device_id, job_info.action_name
                     )
-                    logger.info(f"[DeviceActionManager] Queued job {job_log} cancelled for {device_key}")
+                    logger.trace(f"[DeviceActionManager] Queued job {job_log} cancelled for {device_key}")
                     return True
 
             job_log = format_job_log(job_info.job_id, job_info.task_id, job_info.device_id, job_info.action_name)
@@ -407,6 +409,7 @@ class MessageProcessor:
         # 线程控制
         self.is_running = False
         self.thread = None
+        self._loop = None  # asyncio event loop引用，用于外部关闭websocket
         self.reconnect_count = 0
 
         logger.info(f"[MessageProcessor] Initialized for URL: {websocket_url}")
@@ -433,22 +436,31 @@ class MessageProcessor:
     def stop(self) -> None:
         """停止消息处理线程"""
         self.is_running = False
+        # 主动关闭websocket以快速中断消息接收循环
+        ws = self.websocket
+        loop = self._loop
+        if ws and loop and loop.is_running():
+            try:
+                asyncio.run_coroutine_threadsafe(ws.close(), loop)
+            except Exception:
+                pass
         if self.thread and self.thread.is_alive():
             self.thread.join(timeout=2)
         logger.info("[MessageProcessor] Stopped")
 
     def _run(self):
         """运行消息处理主循环"""
-        loop = asyncio.new_event_loop()
+        self._loop = asyncio.new_event_loop()
         try:
-            asyncio.set_event_loop(loop)
-            loop.run_until_complete(self._connection_handler())
+            asyncio.set_event_loop(self._loop)
+            self._loop.run_until_complete(self._connection_handler())
         except Exception as e:
             logger.error(f"[MessageProcessor] Thread error: {str(e)}")
             logger.error(traceback.format_exc())
         finally:
-            if loop:
-                loop.close()
+            if self._loop:
+                self._loop.close()
+            self._loop = None
 
     async def _connection_handler(self):
         """处理WebSocket连接和重连逻辑"""
@@ -465,8 +477,10 @@ class MessageProcessor:
                 async with websockets.connect(
                     self.websocket_url,
                     ssl=ssl_context,
+                    open_timeout=20,
                     ping_interval=WSConfig.ping_interval,
                     ping_timeout=10,
+                    close_timeout=5,
                     additional_headers={
                         "Authorization": f"Lab {BasicConfig.auth_secret()}",
                         "EdgeSession": f"{self.session_id}",
@@ -477,77 +491,94 @@ class MessageProcessor:
                     self.connected = True
                     self.reconnect_count = 0
 
-                    logger.trace(f"[MessageProcessor] Connected to {self.websocket_url}")
+                    logger.info(f"[MessageProcessor] 已连接到 {self.websocket_url}")
 
                     # 启动发送协程
-                    send_task = asyncio.create_task(self._send_handler())
+                    send_task = asyncio.create_task(self._send_handler(), name="websocket-send_task")
+
+                    # 每次连接（含重连）后重新向服务端注册，
+                    # 否则服务端不知道客户端已上线，不会推送消息。
+                    if self.websocket_client:
+                        self.websocket_client.publish_host_ready()
 
                     try:
                         # 接收消息循环
                         await self._message_handler()
                     finally:
+                        # 必须在 async with __aexit__ 之前停止 send_task，
+                        # 否则 send_task 会在关闭握手期间继续发送数据，
+                        # 干扰 websockets 库的内部清理，导致 task 泄漏。
+                        self.connected = False
                         send_task.cancel()
                         try:
                             await send_task
                         except asyncio.CancelledError:
                             pass
-                        self.connected = False
 
             except websockets.exceptions.ConnectionClosed:
-                logger.warning("[MessageProcessor] Connection closed")
-                self.connected = False
+                logger.warning("[MessageProcessor] 与服务端连接中断")
+            except TimeoutError:
+                logger.warning(
+                    f"[MessageProcessor] 与服务端连接通信超时 (已尝试 {self.reconnect_count + 1} 次)，请检查您的网络状况"
+                )
+            except websockets.exceptions.InvalidStatus as e:
+                logger.warning(
+                    f"[MessageProcessor] 收到服务端注册码 {e.response.status_code}, 上一进程可能还未退出"
+                )
             except Exception as e:
-                logger.error(f"[MessageProcessor] Connection error: {str(e)}")
                 logger.error(traceback.format_exc())
-                self.connected = False
+                logger.error(f"[MessageProcessor] 尝试重连时出错 {str(e)}")
             finally:
+                self.connected = False
                 self.websocket = None
 
             # 重连逻辑
-            if self.is_running and self.reconnect_count < WSConfig.max_reconnect_attempts:
+            if not self.is_running:
+                break
+            if self.reconnect_count < WSConfig.max_reconnect_attempts:
                 self.reconnect_count += 1
+                backoff = WSConfig.reconnect_interval
                 logger.info(
-                    f"[MessageProcessor] Reconnecting in {WSConfig.reconnect_interval}s "
-                    f"(attempt {self.reconnect_count}/{WSConfig.max_reconnect_attempts})"
+                    f"[MessageProcessor] 即将在 {backoff} 秒后重连 (已尝试 {self.reconnect_count}/{WSConfig.max_reconnect_attempts})"
                 )
-                await asyncio.sleep(WSConfig.reconnect_interval)
-            elif self.reconnect_count >= WSConfig.max_reconnect_attempts:
+                await asyncio.sleep(backoff)
+            else:
                 logger.error("[MessageProcessor] Max reconnection attempts reached")
                 break
-            else:
-                self.reconnect_count -= 1
 
     async def _message_handler(self):
-        """处理接收到的消息"""
+        """处理接收到的消息。
+
+        ConnectionClosed 不在此处捕获，让其向上传播到 _connection_handler，
+        以便 async with websockets.connect() 的 __aexit__ 能感知连接已断，
+        正确清理内部 task，避免 task 泄漏。
+        """
         if not self.websocket:
             logger.error("[MessageProcessor] WebSocket connection is None")
             return
 
-        try:
-            async for message in self.websocket:
-                try:
-                    data = json.loads(message)
-                    message_type = data.get("action", "")
-                    message_data = data.get("data")
-                    if self.session_id and self.session_id == data.get("edge_session"):
-                        await self._process_message(message_type, message_data)
+        async for message in self.websocket:
+            try:
+                data = json.loads(message)
+                message_type = data.get("action", "")
+                message_data = data.get("data")
+                if self.session_id and self.session_id == data.get("edge_session"):
+                    await self._process_message(message_type, message_data)
+                else:
+                    if message_type.endswith("_material"):
+                        logger.trace(
+                            f"[MessageProcessor] 收到一条归属 {data.get('edge_session')} 的旧消息：{data}"
+                        )
+                        logger.debug(
+                            f"[MessageProcessor] 跳过了一条归属 {data.get('edge_session')} 的旧消息: {data.get('action')}"
+                        )
                     else:
-                        if message_type.endswith("_material"):
-                            logger.trace(f"[MessageProcessor] 收到一条归属 {data.get('edge_session')} 的旧消息：{data}")
-                            logger.debug(f"[MessageProcessor] 跳过了一条归属 {data.get('edge_session')} 的旧消息: {data.get('action')}")
-                        else:
-                            await self._process_message(message_type, message_data)
-                except json.JSONDecodeError:
-                    logger.error(f"[MessageProcessor] Invalid JSON received: {message}")
-                except Exception as e:
-                    logger.error(f"[MessageProcessor] Error processing message: {str(e)}")
-                    logger.error(traceback.format_exc())
-
-        except websockets.exceptions.ConnectionClosed:
-            logger.info("[MessageProcessor] Message handler stopped - connection closed")
-        except Exception as e:
-            logger.error(f"[MessageProcessor] Message handler error: {str(e)}")
-            logger.error(traceback.format_exc())
+                        await self._process_message(message_type, message_data)
+            except json.JSONDecodeError:
+                logger.error(f"[MessageProcessor] Invalid JSON received: {message}")
+            except Exception as e:
+                logger.error(f"[MessageProcessor] Error processing message: {str(e)}")
+                logger.error(traceback.format_exc())
 
     async def _send_handler(self):
         """处理发送队列中的消息"""
@@ -596,6 +627,7 @@ class MessageProcessor:
 
         except asyncio.CancelledError:
             logger.debug("[MessageProcessor] Send handler cancelled")
+            raise
         except Exception as e:
             logger.error(f"[MessageProcessor] Fatal error in send handler: {str(e)}")
             logger.error(traceback.format_exc())
@@ -604,7 +636,7 @@ class MessageProcessor:
 
     async def _process_message(self, message_type: str, message_data: Dict[str, Any]):
         """处理收到的消息"""
-        logger.debug(f"[MessageProcessor] Processing message: {message_type}")
+        logger.trace(f"[MessageProcessor] Processing message: {message_type}")
 
         try:
             if message_type == "pong":
@@ -627,6 +659,10 @@ class MessageProcessor:
             # elif message_type == "session_id":
             #     self.session_id = message_data.get("session_id")
             #     logger.info(f"[MessageProcessor] Session ID: {self.session_id}")
+            elif message_type == "add_device":
+                await self._handle_device_manage(message_data, "add")
+            elif message_type == "remove_device":
+                await self._handle_device_manage(message_data, "remove")
             elif message_type == "request_restart":
                 await self._handle_request_restart(message_data)
             else:
@@ -698,13 +734,13 @@ class MessageProcessor:
             await self._send_action_state_response(
                 device_id, action_name, task_id, job_id, "query_action_status", True, 0
             )
-            logger.info(f"[MessageProcessor] Job {job_log} can start immediately")
+            logger.trace(f"[MessageProcessor] Job {job_log} can start immediately")
         else:
             # 需要排队
             await self._send_action_state_response(
                 device_id, action_name, task_id, job_id, "query_action_status", False, 10
             )
-            logger.info(f"[MessageProcessor] Job {job_log} queued")
+            logger.trace(f"[MessageProcessor] Job {job_log} queued")
 
             # 通知QueueProcessor有新的队列更新
             if self.queue_processor:
@@ -718,6 +754,32 @@ class MessageProcessor:
             req = JobAddReq(**data)
 
             job_log = format_job_log(req.job_id, req.task_id, req.device_id, req.action)
+
+            # 服务端对always_free动作可能跳过query_action_state直接发job_start，
+            # 此时job尚未注册，需要自动补注册
+            existing_job = self.device_manager.get_job_info(req.job_id)
+            if not existing_job:
+                action_name = req.action
+                device_action_key = f"/devices/{req.device_id}/{action_name}"
+                action_always_free = self._check_action_always_free(req.device_id, action_name)
+
+                if action_always_free:
+                    job_info = JobInfo(
+                        job_id=req.job_id,
+                        task_id=req.task_id,
+                        device_id=req.device_id,
+                        action_name=action_name,
+                        device_action_key=device_action_key,
+                        status=JobStatus.QUEUE,
+                        start_time=time.time(),
+                        always_free=True,
+                    )
+                    self.device_manager.add_queue_request(job_info)
+                    logger.info(f"[MessageProcessor] Job {job_log} always_free, auto-registered from direct job_start")
+                else:
+                    logger.error(f"[MessageProcessor] Job {job_log} not registered (missing query_action_state)")
+                    return
+
             success = self.device_manager.start_job(req.job_id)
             if not success:
                 logger.error(f"[MessageProcessor] Failed to start job {job_log}")
@@ -911,9 +973,7 @@ class MessageProcessor:
                         device_action_groups[key_add] = []
                     device_action_groups[key_add].append(item["uuid"])
 
-                    logger.info(
-                        f"[资源同步] 跨站Transfer: {item['uuid'][:8]} from {device_old_id} to {device_id}"
-                    )
+                    logger.info(f"[资源同步] 跨站Transfer: {item['uuid'][:8]} from {device_old_id} to {device_id}")
                 else:
                     # 正常update
                     key = (device_id, "update")
@@ -927,7 +987,9 @@ class MessageProcessor:
                     device_action_groups[key] = []
                 device_action_groups[key].append(item["uuid"])
 
-        logger.trace(f"[资源同步] 动作 {action} 分组数量: {len(device_action_groups)}, 总数量: {len(resource_uuid_list)}")
+        logger.trace(
+            f"[资源同步] 动作 {action} 分组数量: {len(device_action_groups)}, 总数量: {len(resource_uuid_list)}"
+        )
 
         # 为每个(device_id, action)创建独立的更新线程
         for (device_id, actual_action), items in device_action_groups.items():
@@ -963,45 +1025,77 @@ class MessageProcessor:
             )
             thread.start()
 
+    async def _handle_device_manage(self, device_list: list[ResourceDictType], action: str):
+        """Handle add_device / remove_device from LabGo server."""
+        if not device_list:
+            return
+
+        for item in device_list:
+            target_node_id = item.get("target_node_id", "host_node")
+
+            def _notify(target_id: str, act: str, cfg: ResourceDictType):
+                try:
+                    host_node = HostNode.get_instance(timeout=5)
+                    if not host_node:
+                        logger.error(f"[DeviceManage] HostNode not available for {act}_device")
+                        return
+                    success = host_node.notify_device_manage(target_id, act, cfg)
+                    if success:
+                        logger.info(f"[DeviceManage] {act}_device completed on {target_id}")
+                    else:
+                        logger.warning(f"[DeviceManage] {act}_device failed on {target_id}")
+                except Exception as e:
+                    logger.error(f"[DeviceManage] Error in {act}_device: {e}")
+                    logger.error(traceback.format_exc())
+
+            thread = threading.Thread(
+                target=_notify,
+                args=(target_node_id, action, item),
+                daemon=True,
+                name=f"DeviceManage-{action}-{item.get('id', '')}",
+            )
+            thread.start()
+
     async def _handle_request_restart(self, data: Dict[str, Any]):
         """
         处理重启请求
-        
+
         当LabGo发送request_restart时，执行清理并触发重启
         """
         reason = data.get("reason", "unknown")
         delay = data.get("delay", 2)  # 默认延迟2秒
         logger.info(f"[MessageProcessor] Received restart request, reason: {reason}, delay: {delay}s")
-        
+
         # 发送确认消息
-        if self.websocket_client:
-            await self.websocket_client.send_message({
-                "action": "restart_acknowledged",
-                "data": {"reason": reason, "delay": delay}
-            })
-        
+        self.send_message(
+            {"action": "restart_acknowledged", "data": {"reason": reason, "delay": delay}}
+        )
+
         # 设置全局重启标志
         import unilabos.app.main as main_module
+
         main_module._restart_requested = True
         main_module._restart_reason = reason
-        
+
         # 延迟后执行清理
         await asyncio.sleep(delay)
-        
+
         # 在新线程中执行清理，避免阻塞当前事件循环
         def do_cleanup():
             import time
+
             time.sleep(0.5)  # 给当前消息处理完成的时间
             logger.info(f"[MessageProcessor] Starting cleanup for restart, reason: {reason}")
             try:
                 from unilabos.app.utils import cleanup_for_restart
+
                 if cleanup_for_restart():
                     logger.info("[MessageProcessor] Cleanup successful, main() will restart")
                 else:
                     logger.error("[MessageProcessor] Cleanup failed")
             except Exception as e:
                 logger.error(f"[MessageProcessor] Error during cleanup: {e}")
-        
+
         cleanup_thread = threading.Thread(target=do_cleanup, name="RestartCleanupThread", daemon=True)
         cleanup_thread.start()
         logger.info(f"[MessageProcessor] Restart cleanup scheduled")
@@ -1019,7 +1113,7 @@ class MessageProcessor:
                 "task_id": task_id,
                 "job_id": job_id,
                 "free": free,
-                "need_more": need_more,
+                "need_more": need_more + 1,
             },
         }
 
@@ -1077,6 +1171,7 @@ class QueueProcessor:
     def stop(self) -> None:
         """停止队列处理线程"""
         self.is_running = False
+        self.queue_update_event.set()  # 立即唤醒等待中的线程
         if self.thread and self.thread.is_alive():
             self.thread.join(timeout=2)
         logger.info("[QueueProcessor] Stopped")
@@ -1158,7 +1253,7 @@ class QueueProcessor:
                     "task_id": job_info.task_id,
                     "job_id": job_info.job_id,
                     "free": False,
-                    "need_more": 10,
+                    "need_more": 10 + 1,
                 },
             }
             self.message_processor.send_message(message)
@@ -1174,7 +1269,13 @@ class QueueProcessor:
         if not queued_jobs:
             return
 
-        logger.debug(f"[QueueProcessor] Sending busy status for {len(queued_jobs)} queued jobs")
+        queue_summary = {}
+        for j in queued_jobs:
+            key = f"{j.device_id}/{j.action_name}"
+            queue_summary[key] = queue_summary.get(key, 0) + 1
+        logger.debug(
+            f"[QueueProcessor] Sending busy status for {len(queued_jobs)} queued jobs: {queue_summary}"
+        )
 
         for job_info in queued_jobs:
             # 快照可能已过期：在遍历过程中 end_job() 可能已将此 job 移至 READY，
@@ -1191,13 +1292,13 @@ class QueueProcessor:
                     "task_id": job_info.task_id,
                     "job_id": job_info.job_id,
                     "free": False,
-                    "need_more": 10,
+                    "need_more": 10 + 1,
                 },
             }
             success = self.message_processor.send_message(message)
             job_log = format_job_log(job_info.job_id, job_info.task_id, job_info.device_id, job_info.action_name)
             if success:
-                logger.debug(f"[QueueProcessor] Sent busy/need_more for queued job {job_log}")
+                logger.trace(f"[QueueProcessor] Sent busy/need_more for queued job {job_log}")
             else:
                 logger.warning(f"[QueueProcessor] Failed to send busy status for job {job_log}")
 
@@ -1220,7 +1321,7 @@ class QueueProcessor:
             job_info.action_name,
         )
 
-        logger.info(f"[QueueProcessor] Job {job_log} completed with status: {status}")
+        logger.trace(f"[QueueProcessor] Job {job_log} completed with status: {status}")
 
         # 结束任务，获取下一个可执行的任务
         next_job = self.device_manager.end_job(job_id)
@@ -1240,8 +1341,8 @@ class QueueProcessor:
                 },
             }
             self.message_processor.send_message(message)
-            next_job_log = format_job_log(next_job.job_id, next_job.task_id, next_job.device_id, next_job.action_name)
-            logger.info(f"[QueueProcessor] Notified next job {next_job_log} can start")
+            # next_job_log = format_job_log(next_job.job_id, next_job.task_id, next_job.device_id, next_job.action_name)
+            # logger.debug(f"[QueueProcessor] Notified next job {next_job_log} can start")
 
             # 立即触发下一轮状态检查
             self.notify_queue_update()
@@ -1274,6 +1375,10 @@ class WebSocketClient(BaseCommunicationClient):
         self.message_processor = MessageProcessor(self.websocket_url, self.send_queue, self.device_manager)
         self.queue_processor = QueueProcessor(self.device_manager, self.message_processor)
 
+        # running状态debounce缓存: {job_id: (last_send_timestamp, last_feedback_data)}
+        self._job_running_last_sent: Dict[str, tuple] = {}
+        self._job_running_debounce_interval: float = 10.0  # 秒
+
         # 设置相互引用
         self.message_processor.set_queue_processor(self.queue_processor)
         self.message_processor.set_websocket_client(self)
@@ -1330,8 +1435,8 @@ class WebSocketClient(BaseCommunicationClient):
                 message = {"action": "normal_exit", "data": {"session_id": session_id}}
                 self.message_processor.send_message(message)
                 logger.info(f"[WebSocketClient] Sent normal_exit message with session_id: {session_id}")
-                # 给一点时间让消息发送出去
-                time.sleep(1)
+                # send_handler 每100ms检查一次队列，等300ms足以让消息发出
+                time.sleep(0.3)
             except Exception as e:
                 logger.warning(f"[WebSocketClient] Failed to send normal_exit message: {str(e)}")
 
@@ -1373,22 +1478,32 @@ class WebSocketClient(BaseCommunicationClient):
             logger.debug(f"[WebSocketClient] Not connected, cannot publish job status for job_id: {item.job_id}")
             return
 
+        job_log = format_job_log(item.job_id, item.task_id, item.device_id, item.action_name)
+
         # 拦截最终结果状态，与原版本逻辑一致
         if status in ["success", "failed"]:
+            self._job_running_last_sent.pop(item.job_id, None)
+
             host_node = HostNode.get_instance(0)
             if host_node:
-                # 从HostNode的device_action_status中移除job_id
                 try:
                     host_node._device_action_status[item.device_action_key].job_ids.pop(item.job_id, None)
                 except (KeyError, AttributeError):
                     logger.warning(f"[WebSocketClient] Failed to remove job {item.job_id} from HostNode status")
 
-            logger.info(f"[WebSocketClient] Intercepting final status for job_id: {item.job_id} - {status}")
-
-            # 通知队列处理器job完成（包括timeout的job）
             self.queue_processor.handle_job_completed(item.job_id, status)
 
-        # 发送job状态消息
+        # running状态按job_id做debounce，内容变化时仍然上报
+        if status == "running":
+            now = time.time()
+            cached = self._job_running_last_sent.get(item.job_id)
+            if cached is not None:
+                last_ts, last_data = cached
+                if now - last_ts < self._job_running_debounce_interval and last_data == feedback_data:
+                    logger.trace(f"[WebSocketClient] Job status debounced (skip): {job_log} - {status}")
+                    return
+            self._job_running_last_sent[item.job_id] = (now, feedback_data)
+
         message = {
             "action": "job_status",
             "data": {
@@ -1404,7 +1519,6 @@ class WebSocketClient(BaseCommunicationClient):
         }
         self.message_processor.send_message(message)
 
-        job_log = format_job_log(item.job_id, item.task_id, item.device_id, item.action_name)
         logger.trace(f"[WebSocketClient] Job status published: {job_log} - {status}")
 
     def send_ping(self, ping_id: str, timestamp: float) -> None:
@@ -1444,15 +1558,17 @@ class WebSocketClient(BaseCommunicationClient):
         # 收集设备信息
         devices = []
         machine_name = BasicConfig.machine_name
-        
+
         try:
             host_node = HostNode.get_instance(0)
             if host_node:
                 # 获取设备信息
                 for device_id, namespace in host_node.devices_names.items():
-                    device_key = f"{namespace}/{device_id}" if namespace.startswith("/") else f"/{namespace}/{device_id}"
+                    device_key = (
+                        f"{namespace}/{device_id}" if namespace.startswith("/") else f"/{namespace}/{device_id}"
+                    )
                     is_online = device_key in host_node._online_devices
-                    
+
                     # 获取设备的动作信息
                     actions = {}
                     for action_id, client in host_node._action_clients.items():
@@ -1463,16 +1579,18 @@ class WebSocketClient(BaseCommunicationClient):
                                 "action_path": action_id,
                                 "action_type": str(type(client).__name__),
                             }
-                    
-                    devices.append({
-                        "device_id": device_id,
-                        "namespace": namespace,
-                        "device_key": device_key,
-                        "is_online": is_online,
-                        "machine_name": host_node.device_machine_names.get(device_id, machine_name),
-                        "actions": actions,
-                    })
-                
+
+                    devices.append(
+                        {
+                            "device_id": device_id,
+                            "namespace": namespace,
+                            "device_key": device_key,
+                            "is_online": is_online,
+                            "machine_name": host_node.device_machine_names.get(device_id, machine_name),
+                            "actions": actions,
+                        }
+                    )
+
                 logger.info(f"[WebSocketClient] Collected {len(devices)} devices for host_ready")
         except Exception as e:
             logger.warning(f"[WebSocketClient] Error collecting device info: {e}")

unilabos/config/config.py

@@ -24,6 +24,7 @@ class BasicConfig:
     port = 8002  # 本地HTTP服务
     check_mode = False  # CI 检查模式，用于验证 registry 导入和文件一致性
     test_mode = False  # 测试模式，所有动作不实际执行，返回模拟结果
+    extra_resource = False  # 是否加载lab_开头的额外资源
     # 'TRACE', 'DEBUG', 'INFO', 'WARNING', 'ERROR', 'CRITICAL'
     log_level: Literal["TRACE", "DEBUG", "INFO", "WARNING", "ERROR", "CRITICAL"] = "DEBUG"
 
@@ -40,12 +41,12 @@ class BasicConfig:
 class WSConfig:
     reconnect_interval = 5  # 重连间隔（秒）
     max_reconnect_attempts = 999  # 最大重连次数
-    ping_interval = 30  # ping间隔（秒）
+    ping_interval = 20  # ping间隔（秒）
 
 
 # HTTP配置
 class HTTPConfig:
-    remote_addr = "https://uni-lab.bohrium.com/api/v1"
+    remote_addr = "https://leap-lab.bohrium.com/api/v1"
 
 
 # ROS配置

unilabos/device_comms/opcua_client/node/uniopcua.py

@@ -43,7 +43,7 @@ class Base(ABC):
         self._type = typ
         self._data_type = data_type
         self._node: Optional[Node] = None
-        
+
     def _get_node(self) -> Node:
         if self._node is None:
             try:
@@ -66,7 +66,7 @@ class Base(ABC):
                 # 直接以字符串形式处理
                 if isinstance(nid, str):
                     nid = nid.strip()
-                    
+
                     # 处理包含类名的格式，如 'StringNodeId(ns=4;s=...)' 或 'NumericNodeId(ns=2;i=...)'
                     # 提取括号内的内容
                     match_wrapped = re.match(r'(String|Numeric|Byte|Guid|TwoByteNode|FourByteNode)NodeId\((.*)\)', nid)
@@ -116,16 +116,16 @@ class Base(ABC):
     def read(self) -> Tuple[Any, bool]:
         """读取节点值，返回(值, 是否出错)"""
         pass
-    
+
     @abstractmethod
     def write(self, value: Any) -> bool:
         """写入节点值，返回是否出错"""
         pass
-    
+
     @property
     def type(self) -> NodeType:
         return self._type
-    
+
     @property
     def node_id(self) -> str:
         return self._node_id
@@ -210,15 +210,15 @@ class Method(Base):
         super().__init__(client, name, node_id, NodeType.METHOD, data_type)
         self._parent_node_id = parent_node_id
         self._parent_node = None
-        
+
     def _get_parent_node(self) -> Node:
         if self._parent_node is None:
             try:
                 # 处理父节点ID，使用与_get_node相同的解析逻辑
                 import re
-                
+
                 nid = self._parent_node_id
-                
+
                 # 如果已经是 NodeId 对象，直接使用
                 try:
                     from opcua.ua import NodeId as UaNodeId
@@ -227,16 +227,16 @@ class Method(Base):
                         return self._parent_node
                 except Exception:
                     pass
-                
+
                 # 字符串处理
                 if isinstance(nid, str):
                     nid = nid.strip()
-                    
+
                     # 处理包含类名的格式
                     match_wrapped = re.match(r'(String|Numeric|Byte|Guid|TwoByteNode|FourByteNode)NodeId\((.*)\)', nid)
                     if match_wrapped:
                         nid = match_wrapped.group(2).strip()
-                    
+
                     # 常见短格式
                     if re.match(r'^ns=\d+;[is]=', nid):
                         self._parent_node = self._client.get_node(nid)
@@ -271,7 +271,7 @@ class Method(Base):
     def write(self, value: Any) -> bool:
         """方法节点不支持写入操作"""
         return True
-        
+
     def call(self, *args) -> Tuple[Any, bool]:
         """调用方法，返回(返回值, 是否出错)"""
         try:
@@ -285,7 +285,7 @@ class Method(Base):
 class Object(Base):
     def __init__(self, client: Client, name: str, node_id: str):
         super().__init__(client, name, node_id, NodeType.OBJECT, None)
-        
+
     def read(self) -> Tuple[Any, bool]:
         """对象节点不支持直接读取操作"""
         return None, True
@@ -293,7 +293,7 @@ class Object(Base):
     def write(self, value: Any) -> bool:
         """对象节点不支持直接写入操作"""
         return True
-    
+
     def get_children(self) -> Tuple[List[Node], bool]:
         """获取子节点列表，返回(子节点列表, 是否出错)"""
         try:
@@ -301,4 +301,4 @@ class Object(Base):
             return children, False
         except Exception as e:
             print(f"获取对象 {self._name} 的子节点失败: {e}")
-            return [], True 
+            return [], True

unilabos/device_comms/universal_driver.py

@@ -1,4 +1,3 @@
-
 from abc import abstractmethod
 from functools import wraps
 import inspect

unilabos/device_mesh/resource_visalization.py

@@ -201,42 +201,17 @@ class ResourceVisualization:
                 self.moveit_controllers_yaml['moveit_simple_controller_manager'][f"{name}_{controller_name}"] = moveit_dict['moveit_simple_controller_manager'][controller_name]
 
 
-    @staticmethod
-    def _ensure_ros2_env() -> dict:
-        """确保 ROS2 环境变量正确设置，返回可用于子进程的 env dict"""
-        import sys
-        env = dict(os.environ)
-        conda_prefix = os.path.dirname(os.path.dirname(sys.executable))
-
-        if "AMENT_PREFIX_PATH" not in env or not env["AMENT_PREFIX_PATH"].strip():
-            candidate = os.pathsep.join([conda_prefix, os.path.join(conda_prefix, "Library")])
-            env["AMENT_PREFIX_PATH"] = candidate
-            os.environ["AMENT_PREFIX_PATH"] = candidate
-
-        extra_bin_dirs = [
-            os.path.join(conda_prefix, "Library", "bin"),
-            os.path.join(conda_prefix, "Library", "lib"),
-            os.path.join(conda_prefix, "Scripts"),
-            conda_prefix,
-        ]
-        current_path = env.get("PATH", "")
-        for d in extra_bin_dirs:
-            if d not in current_path:
-                current_path = d + os.pathsep + current_path
-        env["PATH"] = current_path
-        os.environ["PATH"] = current_path
-
-        return env
-
     def create_launch_description(self) -> LaunchDescription:
         """
         创建launch描述，包含robot_state_publisher和move_group节点
 
+        Args:
+            urdf_str: URDF文本
+
         Returns:
             LaunchDescription: launch描述对象
         """
-        launch_env = self._ensure_ros2_env()
-
+        # 检查ROS 2环境变量
         if "AMENT_PREFIX_PATH" not in os.environ:
             raise OSError(
                 "ROS 2环境未正确设置。需要设置 AMENT_PREFIX_PATH 环境变量。\n"
@@ -315,7 +290,7 @@ class ResourceVisualization:
                         {"robot_description": robot_description},
                         ros2_controllers,
                     ],
-                    env=launch_env,
+                    env=dict(os.environ)
                 )
             )
             for controller in self.moveit_controllers_yaml['moveit_simple_controller_manager']['controller_names']:
@@ -325,7 +300,7 @@ class ResourceVisualization:
                         executable="spawner",
                         arguments=[f"{controller}", "--controller-manager", f"controller_manager"],
                         output="screen",
-                        env=launch_env,
+                        env=dict(os.environ)
                     )
                 )
             controllers.append(
@@ -334,7 +309,7 @@ class ResourceVisualization:
                         executable="spawner",
                         arguments=["joint_state_broadcaster", "--controller-manager", f"controller_manager"],
                         output="screen",
-                        env=launch_env,
+                        env=dict(os.environ)
                 )
             )
             for i in controllers:
@@ -342,6 +317,7 @@ class ResourceVisualization:
         else:
             ros2_controllers = None
 
+        # 创建robot_state_publisher节点
         robot_state_publisher = nd(
             package='robot_state_publisher',
             executable='robot_state_publisher',
@@ -351,8 +327,9 @@ class ResourceVisualization:
                 'robot_description': robot_description,
                 'use_sim_time': False
             },
+            # kinematics_dict
             ],
-            env=launch_env,
+            env=dict(os.environ)
         )
 
 
@@ -384,7 +361,7 @@ class ResourceVisualization:
             executable='move_group',
             output='screen',
             parameters=moveit_params,
-            env=launch_env,
+            env=dict(os.environ)
         )
 
 
@@ -402,11 +379,13 @@ class ResourceVisualization:
                 arguments=['-d', f"{str(self.mesh_path)}/view_robot.rviz"],
                 output='screen',
                 parameters=[
-                    {'robot_description_kinematics': kinematics_dict},
+                    {'robot_description_kinematics': kinematics_dict,
+                     },
                     robot_description_planning,
                     planning_pipelines,
+
                 ],
-                env=launch_env,
+                env=dict(os.environ)
             )
             self.launch_description.add_action(rviz_node)
 

unilabos/devices/liquid_handling/laiyu/backend/__init__.py

@@ -1,9 +1,7 @@
 """
 LaiYu液体处理设备后端模块
-
-提供设备后端接口和实现
 """
 
-from .laiyu_backend import LaiYuLiquidBackend, create_laiyu_backend
+from .laiyu_v_backend import UniLiquidHandlerLaiyuBackend
 
-__all__ = ['LaiYuLiquidBackend', 'create_laiyu_backend']
+__all__ = ['UniLiquidHandlerLaiyuBackend']

unilabos/devices/liquid_handling/laiyu/backend/laiyu_backend.py

@@ -1,334 +0,0 @@
-"""
-LaiYu液体处理设备后端实现
-
-提供设备的后端接口和控制逻辑
-"""
-
-import logging
-from typing import Dict, Any, Optional, List
-from abc import ABC, abstractmethod
-
-# 尝试导入PyLabRobot后端
-try:
-    from pylabrobot.liquid_handling.backends import LiquidHandlerBackend
-    PYLABROBOT_AVAILABLE = True
-except ImportError:
-    PYLABROBOT_AVAILABLE = False
-    # 创建模拟后端基类
-    class LiquidHandlerBackend:
-        def __init__(self, name: str):
-            self.name = name
-            self.is_connected = False
-        
-        def connect(self):
-            """连接设备"""
-            pass
-        
-        def disconnect(self):
-            """断开连接"""
-            pass
-
-
-class LaiYuLiquidBackend(LiquidHandlerBackend):
-    """LaiYu液体处理设备后端"""
-    
-    def __init__(self, name: str = "LaiYu_Liquid_Backend"):
-        """
-        初始化LaiYu液体处理设备后端
-        
-        Args:
-            name: 后端名称
-        """
-        if PYLABROBOT_AVAILABLE:
-            # PyLabRobot 的 LiquidHandlerBackend 不接受参数
-            super().__init__()
-        else:
-            # 模拟版本接受 name 参数
-            super().__init__(name)
-        
-        self.name = name
-        self.logger = logging.getLogger(__name__)
-        self.is_connected = False
-        self.device_info = {
-            "name": "LaiYu液体处理设备",
-            "version": "1.0.0",
-            "manufacturer": "LaiYu",
-            "model": "LaiYu_Liquid_Handler"
-        }
-    
-    def connect(self) -> bool:
-        """
-        连接到LaiYu液体处理设备
-        
-        Returns:
-            bool: 连接是否成功
-        """
-        try:
-            self.logger.info("正在连接到LaiYu液体处理设备...")
-            # 这里应该实现实际的设备连接逻辑
-            # 目前返回模拟连接成功
-            self.is_connected = True
-            self.logger.info("成功连接到LaiYu液体处理设备")
-            return True
-        except Exception as e:
-            self.logger.error(f"连接LaiYu液体处理设备失败: {e}")
-            self.is_connected = False
-            return False
-    
-    def disconnect(self) -> bool:
-        """
-        断开与LaiYu液体处理设备的连接
-        
-        Returns:
-            bool: 断开连接是否成功
-        """
-        try:
-            self.logger.info("正在断开与LaiYu液体处理设备的连接...")
-            # 这里应该实现实际的设备断开连接逻辑
-            self.is_connected = False
-            self.logger.info("成功断开与LaiYu液体处理设备的连接")
-            return True
-        except Exception as e:
-            self.logger.error(f"断开LaiYu液体处理设备连接失败: {e}")
-            return False
-    
-    def is_device_connected(self) -> bool:
-        """
-        检查设备是否已连接
-        
-        Returns:
-            bool: 设备是否已连接
-        """
-        return self.is_connected
-    
-    def get_device_info(self) -> Dict[str, Any]:
-        """
-        获取设备信息
-        
-        Returns:
-            Dict[str, Any]: 设备信息字典
-        """
-        return self.device_info.copy()
-    
-    def home_device(self) -> bool:
-        """
-        设备归零操作
-        
-        Returns:
-            bool: 归零是否成功
-        """
-        if not self.is_connected:
-            self.logger.error("设备未连接，无法执行归零操作")
-            return False
-        
-        try:
-            self.logger.info("正在执行设备归零操作...")
-            # 这里应该实现实际的设备归零逻辑
-            self.logger.info("设备归零操作完成")
-            return True
-        except Exception as e:
-            self.logger.error(f"设备归零操作失败: {e}")
-            return False
-    
-    def aspirate(self, volume: float, location: Dict[str, Any]) -> bool:
-        """
-        吸液操作
-        
-        Args:
-            volume: 吸液体积 (微升)
-            location: 吸液位置信息
-            
-        Returns:
-            bool: 吸液是否成功
-        """
-        if not self.is_connected:
-            self.logger.error("设备未连接，无法执行吸液操作")
-            return False
-        
-        try:
-            self.logger.info(f"正在执行吸液操作: 体积={volume}μL, 位置={location}")
-            # 这里应该实现实际的吸液逻辑
-            self.logger.info("吸液操作完成")
-            return True
-        except Exception as e:
-            self.logger.error(f"吸液操作失败: {e}")
-            return False
-    
-    def dispense(self, volume: float, location: Dict[str, Any]) -> bool:
-        """
-        排液操作
-        
-        Args:
-            volume: 排液体积 (微升)
-            location: 排液位置信息
-            
-        Returns:
-            bool: 排液是否成功
-        """
-        if not self.is_connected:
-            self.logger.error("设备未连接，无法执行排液操作")
-            return False
-        
-        try:
-            self.logger.info(f"正在执行排液操作: 体积={volume}μL, 位置={location}")
-            # 这里应该实现实际的排液逻辑
-            self.logger.info("排液操作完成")
-            return True
-        except Exception as e:
-            self.logger.error(f"排液操作失败: {e}")
-            return False
-    
-    def pick_up_tip(self, location: Dict[str, Any]) -> bool:
-        """
-        取枪头操作
-        
-        Args:
-            location: 枪头位置信息
-            
-        Returns:
-            bool: 取枪头是否成功
-        """
-        if not self.is_connected:
-            self.logger.error("设备未连接，无法执行取枪头操作")
-            return False
-        
-        try:
-            self.logger.info(f"正在执行取枪头操作: 位置={location}")
-            # 这里应该实现实际的取枪头逻辑
-            self.logger.info("取枪头操作完成")
-            return True
-        except Exception as e:
-            self.logger.error(f"取枪头操作失败: {e}")
-            return False
-    
-    def drop_tip(self, location: Dict[str, Any]) -> bool:
-        """
-        丢弃枪头操作
-        
-        Args:
-            location: 丢弃位置信息
-            
-        Returns:
-            bool: 丢弃枪头是否成功
-        """
-        if not self.is_connected:
-            self.logger.error("设备未连接，无法执行丢弃枪头操作")
-            return False
-        
-        try:
-            self.logger.info(f"正在执行丢弃枪头操作: 位置={location}")
-            # 这里应该实现实际的丢弃枪头逻辑
-            self.logger.info("丢弃枪头操作完成")
-            return True
-        except Exception as e:
-            self.logger.error(f"丢弃枪头操作失败: {e}")
-            return False
-    
-    def move_to(self, location: Dict[str, Any]) -> bool:
-        """
-        移动到指定位置
-        
-        Args:
-            location: 目标位置信息
-            
-        Returns:
-            bool: 移动是否成功
-        """
-        if not self.is_connected:
-            self.logger.error("设备未连接，无法执行移动操作")
-            return False
-        
-        try:
-            self.logger.info(f"正在移动到位置: {location}")
-            # 这里应该实现实际的移动逻辑
-            self.logger.info("移动操作完成")
-            return True
-        except Exception as e:
-            self.logger.error(f"移动操作失败: {e}")
-            return False
-    
-    def get_status(self) -> Dict[str, Any]:
-        """
-        获取设备状态
-        
-        Returns:
-            Dict[str, Any]: 设备状态信息
-        """
-        return {
-            "connected": self.is_connected,
-            "device_info": self.device_info,
-            "status": "ready" if self.is_connected else "disconnected"
-        }
-    
-    # PyLabRobot 抽象方法实现
-    def stop(self):
-        """停止所有操作"""
-        self.logger.info("停止所有操作")
-        pass
-    
-    @property
-    def num_channels(self) -> int:
-        """返回通道数量"""
-        return 1  # 单通道移液器
-    
-    def can_pick_up_tip(self, tip_rack, tip_position) -> bool:
-        """检查是否可以拾取吸头"""
-        return True  # 简化实现，总是返回True
-    
-    def pick_up_tips(self, tip_rack, tip_positions):
-        """拾取多个吸头"""
-        self.logger.info(f"拾取吸头: {tip_positions}")
-        pass
-    
-    def drop_tips(self, tip_rack, tip_positions):
-        """丢弃多个吸头"""
-        self.logger.info(f"丢弃吸头: {tip_positions}")
-        pass
-    
-    def pick_up_tips96(self, tip_rack):
-        """拾取96个吸头"""
-        self.logger.info("拾取96个吸头")
-        pass
-    
-    def drop_tips96(self, tip_rack):
-        """丢弃96个吸头"""
-        self.logger.info("丢弃96个吸头")
-        pass
-    
-    def aspirate96(self, volume, plate, well_positions):
-        """96通道吸液"""
-        self.logger.info(f"96通道吸液: 体积={volume}")
-        pass
-    
-    def dispense96(self, volume, plate, well_positions):
-        """96通道排液"""
-        self.logger.info(f"96通道排液: 体积={volume}")
-        pass
-    
-    def pick_up_resource(self, resource, location):
-        """拾取资源"""
-        self.logger.info(f"拾取资源: {resource}")
-        pass
-    
-    def drop_resource(self, resource, location):
-        """放置资源"""
-        self.logger.info(f"放置资源: {resource}")
-        pass
-    
-    def move_picked_up_resource(self, resource, location):
-        """移动已拾取的资源"""
-        self.logger.info(f"移动资源: {resource} 到 {location}")
-        pass
-
-
-def create_laiyu_backend(name: str = "LaiYu_Liquid_Backend") -> LaiYuLiquidBackend:
-    """
-    创建LaiYu液体处理设备后端实例
-    
-    Args:
-        name: 后端名称
-        
-    Returns:
-        LaiYuLiquidBackend: 后端实例
-    """
-    return LaiYuLiquidBackend(name)

unilabos/devices/liquid_handling/laiyu/backend/laiyu_v_backend.py

@@ -1,385 +1,307 @@
-      
-import json
+"""LaiYu PLR 后端 — 对齐路径 B 硬件交互模式
+
+硬件初始化顺序与 laiyu_liquid_station.py (路径 B) 一致:
+  1. XYZController(auto_connect=True) — 先开串口
+  2. PipetteController.connect_shared() — 共享 XYZ 的串口 / 锁
+  3. home_all_axes() + pipette.initialize()
+"""
+
+import logging
 from typing import List, Optional, Union
 
-from pylabrobot.liquid_handling.backends.backend import (
-  LiquidHandlerBackend,
-)
+from pylabrobot.liquid_handling.backends.backend import LiquidHandlerBackend
 from pylabrobot.liquid_handling.standard import (
-  Drop,
-  DropTipRack,
-  MultiHeadAspirationContainer,
-  MultiHeadAspirationPlate,
-  MultiHeadDispenseContainer,
-  MultiHeadDispensePlate,
-  Pickup,
-  PickupTipRack,
-  ResourceDrop,
-  ResourceMove,
-  ResourcePickup,
-  SingleChannelAspiration,
-  SingleChannelDispense,
+    Drop,
+    DropTipRack,
+    MultiHeadAspirationContainer,
+    MultiHeadAspirationPlate,
+    MultiHeadDispenseContainer,
+    MultiHeadDispensePlate,
+    Pickup,
+    PickupTipRack,
+    ResourceDrop,
+    ResourceMove,
+    ResourcePickup,
+    SingleChannelAspiration,
+    SingleChannelDispense,
 )
 from pylabrobot.resources import Resource, Tip
 
-import rclpy
-from rclpy.node import Node
-from sensor_msgs.msg import JointState
-import time
-from rclpy.action import ActionClient
-from unilabos_msgs.action import SendCmd
-import re
+from unilabos.devices.liquid_handling.laiyu.controllers.xyz_controller import XYZController
+from unilabos.devices.liquid_handling.laiyu.controllers.pipette_controller import (
+    PipetteController,
+    TipStatus,
+)
 
-from unilabos.devices.ros_dev.liquid_handler_joint_publisher import JointStatePublisher
-from unilabos.devices.liquid_handling.laiyu.controllers.pipette_controller import PipetteController, TipStatus
+logger = logging.getLogger(__name__)
 
 
 class UniLiquidHandlerLaiyuBackend(LiquidHandlerBackend):
-  """Chatter box backend for device-free testing. Prints out all operations."""
+    """LaiYu 硬件后端 — PLR Backend 接口实现"""
 
-  _pip_length = 5
-  _vol_length = 8
-  _resource_length = 20
-  _offset_length = 16
-  _flow_rate_length = 10
-  _blowout_length = 10
-  _lld_z_length = 10
-  _kwargs_length = 15
-  _tip_type_length = 12
-  _max_volume_length = 16
-  _fitting_depth_length = 20
-  _tip_length_length = 16
-  # _pickup_method_length = 20
-  _filter_length = 10
+    def __init__(
+        self,
+        num_channels: int = 1,
+        tip_length: float = 0,
+        total_height: float = 310,
+        port: str = "/dev/ttyUSB0",
+        baudrate: int = 115200,
+        pipette_address: int = 4,
+    ):
+        super().__init__()
+        self._num_channels = num_channels
+        self.tip_length = tip_length
+        self.total_height = total_height
 
-  def __init__(self, num_channels: int = 8 , tip_length: float = 0 , total_height: float = 310, port: str = "/dev/ttyUSB0"):
-    """Initialize a chatter box backend."""
-    super().__init__()
-    self._num_channels = num_channels
-    self.tip_length = tip_length
-    self.total_height = total_height
-# rclpy.init()
-    if not rclpy.ok():
-        rclpy.init()
-    self.joint_state_publisher = None
-    self.hardware_interface = PipetteController(port=port)
+        # 保存配置，延迟到 setup() 再创建硬件对象
+        self._port = port
+        self._baudrate = baudrate
+        self._pipette_address = pipette_address
 
-  async def setup(self):
-    # self.joint_state_publisher = JointStatePublisher()
-    # self.hardware_interface.xyz_controller.connect_device()
-    # self.hardware_interface.xyz_controller.home_all_axes()
-    await super().setup()
-    self.hardware_interface.connect()
-    self.hardware_interface.initialize()
+        self._xyz: Optional[XYZController] = None
+        self._pipette_ctrl: Optional[PipetteController] = None
+        self._ros_node = None
 
-    print("Setting up the liquid handler.")
+    # ------------------------------------------------------------------ lifecycle
 
-  async def stop(self):
-    print("Stopping the liquid handler.")
+    def post_init(self, ros_node):
+        """接收 ROS 节点引用（由 Handler.post_init 调用）"""
+        self._ros_node = ros_node
 
-  def serialize(self) -> dict:
-    return {**super().serialize(), "num_channels": self.num_channels}
+    async def setup(self):
+        """按路径 B 顺序初始化硬件"""
+        await super().setup()
 
-  def pipette_aspirate(self, volume: float, flow_rate: float):
+        # 1. XYZ 先开串口
+        self._xyz = XYZController(
+            port=self._port,
+            baudrate=self._baudrate,
+            auto_connect=True,
+        )
+        if not self._xyz.is_connected:
+            raise RuntimeError("XYZ 控制器连接失败")
 
-    self.hardware_interface.pipette.set_max_speed(flow_rate)
-    res = self.hardware_interface.pipette.aspirate(volume=volume)
-    
-    if not res:
-        self.hardware_interface.logger.error("吸取失败，当前体积: {self.hardware_interface.current_volume}")
-        return
+        # 2. PipetteController 共享 XYZ 串口
+        self._pipette_ctrl = PipetteController(
+            port=self._port,
+            address=self._pipette_address,
+        )
+        self._pipette_ctrl.connect_shared(
+            serial_conn=self._xyz.serial_conn,
+            serial_lock=self._xyz.serial_lock,
+            xyz_controller=self._xyz,
+        )
 
-    self.hardware_interface.current_volume += volume 
+        # 3. 回零 + 移液器初始化
+        self._xyz.home_all_axes()
+        self._pipette_ctrl.initialize()
 
-  def pipette_dispense(self, volume: float, flow_rate: float):
+        logger.info("LaiYu 后端硬件初始化完成")
 
-    self.hardware_interface.pipette.set_max_speed(flow_rate)
-    res = self.hardware_interface.pipette.dispense(volume=volume)
-    if not res:
-        self.hardware_interface.logger.error("排液失败，当前体积: {self.hardware_interface.current_volume}")
-        return
-    self.hardware_interface.current_volume -= volume
+    async def stop(self):
+        """正确断开硬件"""
+        try:
+            if self._pipette_ctrl:
+                self._pipette_ctrl.disconnect_shared()
+            if self._xyz:
+                self._xyz.disconnect()
+            logger.info("LaiYu 后端硬件已断开")
+        except Exception as e:
+            logger.error(f"停止后端失败: {e}")
 
-  @property
-  def num_channels(self) -> int:
-    return self._num_channels
+    # ------------------------------------------------------------------ helpers
 
-  async def assigned_resource_callback(self, resource: Resource):
-    print(f"Resource {resource.name} was assigned to the liquid handler.")
+    def _plr_to_machine_coords(self, resource, offset):
+        """PLR Resource 坐标 → 机器坐标 (倒置龙门架: total_height - z, -y)"""
+        coordinate = resource.get_absolute_location(x="c", y="c")
+        x = coordinate.x + offset.x
+        y = coordinate.y + offset.y
+        z_plr = coordinate.z + offset.z
+        return x, -y, self.total_height - (z_plr + self.tip_length)
 
-  async def unassigned_resource_callback(self, name: str):
-    print(f"Resource {name} was unassigned from the liquid handler.")
+    def _pipette_aspirate(self, volume: float, flow_rate: float):
+        self._pipette_ctrl.pipette.set_max_speed(flow_rate)
+        res = self._pipette_ctrl.pipette.aspirate(volume=volume)
+        if not res:
+            logger.error(f"吸取失败，当前体积: {self._pipette_ctrl.current_volume}")
+            return
+        self._pipette_ctrl.current_volume += volume
 
-  async def pick_up_tips(self, ops: List[Pickup], use_channels: List[int], **backend_kwargs):
-    print("Picking up tips:")
-    # print(ops.tip)
-    header = (
-      f"{'pip#':<{UniLiquidHandlerLaiyuBackend._pip_length}} "
-      f"{'resource':<{UniLiquidHandlerLaiyuBackend._resource_length}} "
-      f"{'offset':<{UniLiquidHandlerLaiyuBackend._offset_length}} "
-      f"{'tip type':<{UniLiquidHandlerLaiyuBackend._tip_type_length}} "
-      f"{'max volume (µL)':<{UniLiquidHandlerLaiyuBackend._max_volume_length}} "
-      f"{'fitting depth (mm)':<{UniLiquidHandlerLaiyuBackend._fitting_depth_length}} "
-      f"{'tip length (mm)':<{UniLiquidHandlerLaiyuBackend._tip_length_length}} "
-      # f"{'pickup method':<{ChatterboxBackend._pickup_method_length}} "
-      f"{'filter':<{UniLiquidHandlerLaiyuBackend._filter_length}}"
-    )
-    # print(header)
+    def _pipette_dispense(self, volume: float, flow_rate: float):
+        self._pipette_ctrl.pipette.set_max_speed(flow_rate)
+        res = self._pipette_ctrl.pipette.dispense(volume=volume)
+        if not res:
+            logger.error(f"排液失败，当前体积: {self._pipette_ctrl.current_volume}")
+            return
+        self._pipette_ctrl.current_volume -= volume
 
-    for op, channel in zip(ops, use_channels):
-      offset = f"{round(op.offset.x, 1)},{round(op.offset.y, 1)},{round(op.offset.z, 1)}"
-      row = (
-        f"  p{channel}: "
-        f"{op.resource.name[-30:]:<{UniLiquidHandlerLaiyuBackend._resource_length}} "
-        f"{offset:<{UniLiquidHandlerLaiyuBackend._offset_length}} "
-        f"{op.tip.__class__.__name__:<{UniLiquidHandlerLaiyuBackend._tip_type_length}} "
-        f"{op.tip.maximal_volume:<{UniLiquidHandlerLaiyuBackend._max_volume_length}} "
-        f"{op.tip.fitting_depth:<{UniLiquidHandlerLaiyuBackend._fitting_depth_length}} "
-        f"{op.tip.total_tip_length:<{UniLiquidHandlerLaiyuBackend._tip_length_length}} "
-        # f"{str(op.tip.pickup_method)[-20:]:<{ChatterboxBackend._pickup_method_length}} "
-        f"{'Yes' if op.tip.has_filter else 'No':<{UniLiquidHandlerLaiyuBackend._filter_length}}"
-      )
-      # print(row)
-      # print(op.resource.get_absolute_location())
-    
-    self.tip_length = ops[0].tip.total_tip_length
-    coordinate = ops[0].resource.get_absolute_location(x="c",y="c")
-    offset_xyz = ops[0].offset
-    x = coordinate.x + offset_xyz.x
-    y = coordinate.y + offset_xyz.y
-    z = self.total_height - (coordinate.z + self.tip_length) + offset_xyz.z
-    # print("moving")
-    self.hardware_interface._update_tip_status()
-    if self.hardware_interface.tip_status == TipStatus.TIP_ATTACHED:
-        print("已有枪头，无需重复拾取")
-        return
-    self.hardware_interface.xyz_controller.move_to_work_coord_safe(x=x, y=-y, z=z,speed=200)
-    self.hardware_interface.xyz_controller.move_to_work_coord_safe(z=self.hardware_interface.xyz_controller.machine_config.safe_z_height,speed=100)
-    # self.joint_state_publisher.send_resource_action(ops[0].resource.name, x, y, z, "pick",channels=use_channels)
-    #   goback()
+    # ------------------------------------------------------------------ properties
 
+    def serialize(self) -> dict:
+        return {**super().serialize(), "num_channels": self.num_channels}
 
+    @property
+    def num_channels(self) -> int:
+        return self._num_channels
 
+    # ------------------------------------------------------------------ resource callbacks
 
-  async def drop_tips(self, ops: List[Drop], use_channels: List[int], **backend_kwargs):
-    print("Dropping tips:")
-    header = (
-      f"{'pip#':<{UniLiquidHandlerLaiyuBackend._pip_length}} "
-      f"{'resource':<{UniLiquidHandlerLaiyuBackend._resource_length}} "
-      f"{'offset':<{UniLiquidHandlerLaiyuBackend._offset_length}} "
-      f"{'tip type':<{UniLiquidHandlerLaiyuBackend._tip_type_length}} "
-      f"{'max volume (µL)':<{UniLiquidHandlerLaiyuBackend._max_volume_length}} "
-      f"{'fitting depth (mm)':<{UniLiquidHandlerLaiyuBackend._fitting_depth_length}} "
-      f"{'tip length (mm)':<{UniLiquidHandlerLaiyuBackend._tip_length_length}} "
-      # f"{'pickup method':<{ChatterboxBackend._pickup_method_length}} "
-      f"{'filter':<{UniLiquidHandlerLaiyuBackend._filter_length}}"
-    )
-    # print(header)
+    async def assigned_resource_callback(self, resource: Resource):
+        logger.info(f"Resource {resource.name} was assigned to the liquid handler.")
 
-    for op, channel in zip(ops, use_channels):
-      offset = f"{round(op.offset.x, 1)},{round(op.offset.y, 1)},{round(op.offset.z, 1)}"
-      row = (
-        f"  p{channel}: "
-        f"{op.resource.name[-30:]:<{UniLiquidHandlerLaiyuBackend._resource_length}} "
-        f"{offset:<{UniLiquidHandlerLaiyuBackend._offset_length}} "
-        f"{op.tip.__class__.__name__:<{UniLiquidHandlerLaiyuBackend._tip_type_length}} "
-        f"{op.tip.maximal_volume:<{UniLiquidHandlerLaiyuBackend._max_volume_length}} "
-        f"{op.tip.fitting_depth:<{UniLiquidHandlerLaiyuBackend._fitting_depth_length}} "
-        f"{op.tip.total_tip_length:<{UniLiquidHandlerLaiyuBackend._tip_length_length}} "
-        # f"{str(op.tip.pickup_method)[-20:]:<{ChatterboxBackend._pickup_method_length}} "
-        f"{'Yes' if op.tip.has_filter else 'No':<{UniLiquidHandlerLaiyuBackend._filter_length}}"
-      )
-      # print(row)
+    async def unassigned_resource_callback(self, name: str):
+        logger.info(f"Resource {name} was unassigned from the liquid handler.")
 
-    coordinate = ops[0].resource.get_absolute_location(x="c",y="c")
-    offset_xyz = ops[0].offset
-    x = coordinate.x + offset_xyz.x
-    y = coordinate.y + offset_xyz.y
-    z = self.total_height - (coordinate.z + self.tip_length) + offset_xyz.z -20
-    # print(x, y, z)
-    # print("moving")
-    self.hardware_interface._update_tip_status()
-    if self.hardware_interface.tip_status == TipStatus.NO_TIP:
-        print("无枪头，无需丢弃")
-        return
-    self.hardware_interface.xyz_controller.move_to_work_coord_safe(x=x, y=-y, z=z,speed=200)
-    self.hardware_interface.eject_tip
-    self.hardware_interface.xyz_controller.move_to_work_coord_safe(z=self.hardware_interface.xyz_controller.machine_config.safe_z_height)  
+    # ------------------------------------------------------------------ pick_up_tips
 
-  async def aspirate(
-    self,
-    ops: List[SingleChannelAspiration],
-    use_channels: List[int],
-    **backend_kwargs,
-  ):
-    print("Aspirating:")
-    header = (
-      f"{'pip#':<{UniLiquidHandlerLaiyuBackend._pip_length}} "
-      f"{'vol(ul)':<{UniLiquidHandlerLaiyuBackend._vol_length}} "
-      f"{'resource':<{UniLiquidHandlerLaiyuBackend._resource_length}} "
-      f"{'offset':<{UniLiquidHandlerLaiyuBackend._offset_length}} "
-      f"{'flow rate':<{UniLiquidHandlerLaiyuBackend._flow_rate_length}} "
-      f"{'blowout':<{UniLiquidHandlerLaiyuBackend._blowout_length}} "
-      f"{'lld_z':<{UniLiquidHandlerLaiyuBackend._lld_z_length}}  "
-      # f"{'liquids':<20}" # TODO: add liquids
-    )
-    for key in backend_kwargs:
-      header += f"{key:<{UniLiquidHandlerLaiyuBackend._kwargs_length}} "[-16:]
-    # print(header)
+    async def pick_up_tips(self, ops: List[Pickup], use_channels: List[int], **backend_kwargs):
+        tip = ops[0].tip
+        self.tip_length = tip.total_tip_length
+        x, y, z_top = self._plr_to_machine_coords(ops[0].resource, ops[0].offset)
 
-    for o, p in zip(ops, use_channels):
-      offset = f"{round(o.offset.x, 1)},{round(o.offset.y, 1)},{round(o.offset.z, 1)}"
-      row = (
-        f"  p{p}: "
-        f"{o.volume:<{UniLiquidHandlerLaiyuBackend._vol_length}} "
-        f"{o.resource.name[-20:]:<{UniLiquidHandlerLaiyuBackend._resource_length}} "
-        f"{offset:<{UniLiquidHandlerLaiyuBackend._offset_length}} "
-        f"{str(o.flow_rate):<{UniLiquidHandlerLaiyuBackend._flow_rate_length}} "
-        f"{str(o.blow_out_air_volume):<{UniLiquidHandlerLaiyuBackend._blowout_length}} "
-        f"{str(o.liquid_height):<{UniLiquidHandlerLaiyuBackend._lld_z_length}} "
-        # f"{o.liquids if o.liquids is not None else 'none'}"
-      )
-      for key, value in backend_kwargs.items():
-        if isinstance(value, list) and all(isinstance(v, bool) for v in value):
-          value = "".join("T" if v else "F" for v in value)
-        if isinstance(value, list):
-          value = "".join(map(str, value))
-        row += f" {value:<15}"
-      # print(row)
-    coordinate = ops[0].resource.get_absolute_location(x="c",y="c")
-    offset_xyz = ops[0].offset
-    x = coordinate.x + offset_xyz.x
-    y = coordinate.y + offset_xyz.y
-    z = self.total_height - (coordinate.z + self.tip_length) + offset_xyz.z
-    # print(x, y, z)
-    # print("moving")
+        self._pipette_ctrl._update_tip_status()
+        if self._pipette_ctrl.tip_status == TipStatus.TIP_ATTACHED:
+            logger.warning("已有枪头，无需重复拾取")
+            return
 
-    # 判断枪头是否存在
-    self.hardware_interface._update_tip_status()
-    if not self.hardware_interface.tip_status == TipStatus.TIP_ATTACHED:
-        print("无枪头，无法吸液")
-        return
-    # 判断吸液量是否超过枪头容量
-    flow_rate = backend_kwargs["flow_rate"] if "flow_rate" in backend_kwargs else 500
-    blow_out_air_volume = backend_kwargs["blow_out_air_volume"] if "blow_out_air_volume" in backend_kwargs else 0
-    if self.hardware_interface.current_volume + ops[0].volume + blow_out_air_volume > self.hardware_interface.max_volume:
-        self.hardware_interface.logger.error(f"吸液量超过枪头容量: {self.hardware_interface.current_volume + ops[0].volume} > {self.hardware_interface.max_volume}")
-        return
+        try:
+            # 1. 移到枪头正上方
+            self._xyz.move_to_work_coord_safe(x=x, y=y, z=z_top, speed=200)
+            # 2. 下压到套枪头深度（fitting_depth 是枪头套入长度）
+            z_pickup = z_top + tip.fitting_depth
+            self._xyz.move_to_work_coord_safe(z=z_pickup, speed=100)
+            # 3. 退回安全高度
+            self._xyz.move_to_work_coord_safe(
+                z=self._xyz.machine_config.safe_z_height, speed=100
+            )
+        except Exception as e:
+            logger.error(f"pick_up_tips 移动失败: {e}")
+            raise
 
-    # 移动到吸液位置
-    self.hardware_interface.xyz_controller.move_to_work_coord_safe(x=x, y=-y, z=z,speed=200)
-    self.pipette_aspirate(volume=ops[0].volume, flow_rate=flow_rate)
+    # ------------------------------------------------------------------ drop_tips
 
+    async def drop_tips(self, ops: List[Drop], use_channels: List[int], **backend_kwargs):
+        x, y, z = self._plr_to_machine_coords(ops[0].resource, ops[0].offset)
+        z -= 20  # 额外下移补偿
 
-    self.hardware_interface.xyz_controller.move_to_work_coord_safe(z=self.hardware_interface.xyz_controller.machine_config.safe_z_height)
-    if blow_out_air_volume >0: 
-        self.pipette_aspirate(volume=blow_out_air_volume, flow_rate=flow_rate)
+        self._pipette_ctrl._update_tip_status()
+        if self._pipette_ctrl.tip_status == TipStatus.NO_TIP:
+            logger.warning("无枪头，无需丢弃")
+            return
 
+        try:
+            self._xyz.move_to_work_coord_safe(x=x, y=y, z=z, speed=200)
+            self._pipette_ctrl.eject_tip()  # 修复: 原来缺少 ()
+            self._xyz.move_to_work_coord_safe(
+                z=self._xyz.machine_config.safe_z_height
+            )
+        except Exception as e:
+            logger.error(f"drop_tips 失败: {e}")
+            raise
 
+    # ------------------------------------------------------------------ aspirate
 
+    async def aspirate(
+        self,
+        ops: List[SingleChannelAspiration],
+        use_channels: List[int],
+        **backend_kwargs,
+    ):
+        x, y, z = self._plr_to_machine_coords(ops[0].resource, ops[0].offset)
 
-  async def dispense(
-    self,
-    ops: List[SingleChannelDispense],
-    use_channels: List[int],
-    **backend_kwargs,
-  ):
-    # print("Dispensing:")
-    header = (
-      f"{'pip#':<{UniLiquidHandlerLaiyuBackend._pip_length}} "
-      f"{'vol(ul)':<{UniLiquidHandlerLaiyuBackend._vol_length}} "
-      f"{'resource':<{UniLiquidHandlerLaiyuBackend._resource_length}} "
-      f"{'offset':<{UniLiquidHandlerLaiyuBackend._offset_length}} "
-      f"{'flow rate':<{UniLiquidHandlerLaiyuBackend._flow_rate_length}} "
-      f"{'blowout':<{UniLiquidHandlerLaiyuBackend._blowout_length}} "
-      f"{'lld_z':<{UniLiquidHandlerLaiyuBackend._lld_z_length}}  "
-      # f"{'liquids':<20}" # TODO: add liquids
-    )
-    for key in backend_kwargs:
-      header += f"{key:<{UniLiquidHandlerLaiyuBackend._kwargs_length}} "[-16:]
-    # print(header)
+        self._pipette_ctrl._update_tip_status()
+        if self._pipette_ctrl.tip_status != TipStatus.TIP_ATTACHED:
+            raise RuntimeError("无枪头，无法吸液")
 
-    for o, p in zip(ops, use_channels):
-      offset = f"{round(o.offset.x, 1)},{round(o.offset.y, 1)},{round(o.offset.z, 1)}"
-      row = (
-        f"  p{p}: "
-        f"{o.volume:<{UniLiquidHandlerLaiyuBackend._vol_length}} "
-        f"{o.resource.name[-20:]:<{UniLiquidHandlerLaiyuBackend._resource_length}} "
-        f"{offset:<{UniLiquidHandlerLaiyuBackend._offset_length}} "
-        f"{str(o.flow_rate):<{UniLiquidHandlerLaiyuBackend._flow_rate_length}} "
-        f"{str(o.blow_out_air_volume):<{UniLiquidHandlerLaiyuBackend._blowout_length}} "
-        f"{str(o.liquid_height):<{UniLiquidHandlerLaiyuBackend._lld_z_length}} "
-        # f"{o.liquids if o.liquids is not None else 'none'}"
-      )
-      for key, value in backend_kwargs.items():
-        if isinstance(value, list) and all(isinstance(v, bool) for v in value):
-          value = "".join("T" if v else "F" for v in value)
-        if isinstance(value, list):
-          value = "".join(map(str, value))
-        row += f" {value:<{UniLiquidHandlerLaiyuBackend._kwargs_length}}"
-      # print(row)
-    coordinate = ops[0].resource.get_absolute_location(x="c",y="c")
-    offset_xyz = ops[0].offset
-    x = coordinate.x + offset_xyz.x
-    y = coordinate.y + offset_xyz.y
-    z = self.total_height - (coordinate.z + self.tip_length) + offset_xyz.z
-    # print(x, y, z)
-    # print("moving")
+        flow_rate = backend_kwargs.get("flow_rate", 500)
+        blow_out_air_volume = backend_kwargs.get("blow_out_air_volume", 0)
 
-    # 判断枪头是否存在
-    self.hardware_interface._update_tip_status()
-    if not self.hardware_interface.tip_status == TipStatus.TIP_ATTACHED:
-        print("无枪头，无法排液")
-        return
-    # 判断排液量是否超过枪头容量
-    flow_rate = backend_kwargs["flow_rate"] if "flow_rate" in backend_kwargs else 500
-    blow_out_air_volume = backend_kwargs["blow_out_air_volume"] if "blow_out_air_volume" in backend_kwargs else 0
-    if self.hardware_interface.current_volume - ops[0].volume - blow_out_air_volume < 0:
-        self.hardware_interface.logger.error(f"排液量超过枪头容量: {self.hardware_interface.current_volume - ops[0].volume - blow_out_air_volume} < 0")
-        return
+        if (
+            self._pipette_ctrl.current_volume + ops[0].volume + blow_out_air_volume
+            > self._pipette_ctrl.max_volume
+        ):
+            raise RuntimeError(
+                f"吸液量超过枪头容量: "
+                f"{self._pipette_ctrl.current_volume + ops[0].volume} > {self._pipette_ctrl.max_volume}"
+            )
 
-    
-    # 移动到排液位置  
-    self.hardware_interface.xyz_controller.move_to_work_coord_safe(x=x, y=-y, z=z,speed=200)
-    self.pipette_dispense(volume=ops[0].volume, flow_rate=flow_rate)
+        self._xyz.move_to_work_coord_safe(x=x, y=y, z=z, speed=200)
+        self._pipette_aspirate(volume=ops[0].volume, flow_rate=flow_rate)
 
+        self._xyz.move_to_work_coord_safe(
+            z=self._xyz.machine_config.safe_z_height
+        )
+        if blow_out_air_volume > 0:
+            self._pipette_aspirate(volume=blow_out_air_volume, flow_rate=flow_rate)
 
-    self.hardware_interface.xyz_controller.move_to_work_coord_safe(z=self.hardware_interface.xyz_controller.machine_config.safe_z_height)
-    if blow_out_air_volume > 0: 
-        self.pipette_dispense(volume=blow_out_air_volume, flow_rate=flow_rate)
-    # self.joint_state_publisher.send_resource_action(ops[0].resource.name, x, y, z, "",channels=use_channels)
+    # ------------------------------------------------------------------ dispense
 
-  async def pick_up_tips96(self, pickup: PickupTipRack, **backend_kwargs):
-    print(f"Picking up tips from {pickup.resource.name}.")
+    async def dispense(
+        self,
+        ops: List[SingleChannelDispense],
+        use_channels: List[int],
+        **backend_kwargs,
+    ):
+        x, y, z = self._plr_to_machine_coords(ops[0].resource, ops[0].offset)
 
-  async def drop_tips96(self, drop: DropTipRack, **backend_kwargs):
-    print(f"Dropping tips to {drop.resource.name}.")
+        self._pipette_ctrl._update_tip_status()
+        if self._pipette_ctrl.tip_status != TipStatus.TIP_ATTACHED:
+            raise RuntimeError("无枪头，无法排液")
 
-  async def aspirate96(
-    self, aspiration: Union[MultiHeadAspirationPlate, MultiHeadAspirationContainer]
-  ):
-    if isinstance(aspiration, MultiHeadAspirationPlate):
-      resource = aspiration.wells[0].parent
-    else:
-      resource = aspiration.container
-    print(f"Aspirating {aspiration.volume} from {resource}.")
+        flow_rate = backend_kwargs.get("flow_rate", 500)
+        blow_out_air_volume = backend_kwargs.get("blow_out_air_volume", 0)
 
-  async def dispense96(self, dispense: Union[MultiHeadDispensePlate, MultiHeadDispenseContainer]):
-    if isinstance(dispense, MultiHeadDispensePlate):
-      resource = dispense.wells[0].parent
-    else:
-      resource = dispense.container
-    print(f"Dispensing {dispense.volume} to {resource}.")
+        if (
+            self._pipette_ctrl.current_volume - ops[0].volume - blow_out_air_volume < 0
+        ):
+            raise RuntimeError(
+                f"排液量超过当前体积: "
+                f"{self._pipette_ctrl.current_volume - ops[0].volume - blow_out_air_volume} < 0"
+            )
 
-  async def pick_up_resource(self, pickup: ResourcePickup):
-    print(f"Picking up resource: {pickup}")
+        self._xyz.move_to_work_coord_safe(x=x, y=y, z=z, speed=200)
+        self._pipette_dispense(volume=ops[0].volume, flow_rate=flow_rate)
 
-  async def move_picked_up_resource(self, move: ResourceMove):
-    print(f"Moving picked up resource: {move}")
+        self._xyz.move_to_work_coord_safe(
+            z=self._xyz.machine_config.safe_z_height
+        )
+        if blow_out_air_volume > 0:
+            self._pipette_dispense(volume=blow_out_air_volume, flow_rate=flow_rate)
 
-  async def drop_resource(self, drop: ResourceDrop):
-    print(f"Dropping resource: {drop}")
+    # ------------------------------------------------------------------ 96-channel stubs
 
-  def can_pick_up_tip(self, channel_idx: int, tip: Tip) -> bool:
-    return True
-    
+    async def pick_up_tips96(self, pickup: PickupTipRack, **backend_kwargs):
+        logger.info(f"Picking up tips from {pickup.resource.name}.")
+
+    async def drop_tips96(self, drop: DropTipRack, **backend_kwargs):
+        logger.info(f"Dropping tips to {drop.resource.name}.")
+
+    async def aspirate96(
+        self, aspiration: Union[MultiHeadAspirationPlate, MultiHeadAspirationContainer]
+    ):
+        if isinstance(aspiration, MultiHeadAspirationPlate):
+            resource = aspiration.wells[0].parent
+        else:
+            resource = aspiration.container
+        logger.info(f"Aspirating {aspiration.volume} from {resource}.")
+
+    async def dispense96(
+        self, dispense: Union[MultiHeadDispensePlate, MultiHeadDispenseContainer]
+    ):
+        if isinstance(dispense, MultiHeadDispensePlate):
+            resource = dispense.wells[0].parent
+        else:
+            resource = dispense.container
+        logger.info(f"Dispensing {dispense.volume} to {resource}.")
+
+    async def pick_up_resource(self, pickup: ResourcePickup):
+        logger.info(f"Picking up resource: {pickup}")
+
+    async def move_picked_up_resource(self, move: ResourceMove):
+        logger.info(f"Moving picked up resource: {move}")
+
+    async def drop_resource(self, drop: ResourceDrop):
+        logger.info(f"Dropping resource: {drop}")
+
+    def can_pick_up_tip(self, channel_idx: int, tip: Tip) -> bool:
+        return True

unilabos/devices/liquid_handling/laiyu/controllers/pipette_controller.py

@@ -5,21 +5,16 @@
 封装SOPA移液器的高级控制功能
 """
 
-# 添加项目根目录到Python路径以解决模块导入问题
 import sys
 import os
-from tkinter import N
+
+_current_file = os.path.abspath(__file__)
+_project_root = os.path.dirname(os.path.dirname(os.path.dirname(os.path.dirname(os.path.dirname(_current_file)))))
+if _project_root not in sys.path:
+    sys.path.insert(0, _project_root)
 
 from unilabos.devices.liquid_handling.laiyu.drivers.xyz_stepper_driver import ModbusException
 
-# 无论如何都添加项目根目录到路径
-current_file = os.path.abspath(__file__)
-# 从 .../Uni-Lab-OS/unilabos/devices/LaiYu_Liquid/controllers/pipette_controller.py
-# 向上5级到 .../Uni-Lab-OS
-project_root = os.path.dirname(os.path.dirname(os.path.dirname(os.path.dirname(os.path.dirname(current_file)))))
-# 强制添加项目根目录到sys.path的开头
-sys.path.insert(0, project_root)
-
 import time
 import logging
 from typing import Optional, List, Dict, Tuple
@@ -153,7 +148,7 @@ class PipetteController:
                 logger.error("移液器连接失败")
                 return False
             logger.info("移液器连接成功")
-            
+
             # 连接XYZ步进电机控制器（如果提供了端口）
             if self.xyz_port != self.pipette_port:
                 try:
@@ -172,24 +167,62 @@ class PipetteController:
                 try:
                     self.xyz_controller = XYZController(self.xyz_port, auto_connect=False)
                     self.xyz_controller.serial_conn = self.pipette.serial_port
+                    self.xyz_controller.serial_lock = self.pipette.lock
                     self.xyz_controller.is_connected = True
+                    logger.info("XYZ控制器与移液器共享串口和互斥锁")
                 except Exception as e:
-                    logger.info("未配置XYZ步进电机端口，跳过运动控制器连接")
-            
+                    logger.warning(f"共享端口 XYZ 控制器创建失败: {e}")
+                    self.xyz_controller = None
+                    self.xyz_connected = False
+
             return True
         except Exception as e:
             logger.error(f"设备连接失败: {e}")
             return False
 
+    def connect_shared(self, serial_conn, serial_lock, xyz_controller: XYZController) -> bool:
+        """使用已连接的串口和XYZ控制器（路径 B 模式：XYZ 先开串口，移液器共享）
+
+        Args:
+            serial_conn: 已打开的串口连接（来自 XYZController）
+            serial_lock: 串口互斥锁（来自 XYZController）
+            xyz_controller: 已连接的 XYZController 实例
+        """
+        try:
+            self.pipette.serial_port = serial_conn
+            self.pipette.lock = serial_lock
+            self.pipette.is_connected = True
+
+            self.xyz_controller = xyz_controller
+            self.xyz_connected = True
+
+            logger.info("移液控制器已通过 connect_shared 共享 XYZ 串口")
+            return True
+        except Exception as e:
+            logger.error(f"connect_shared 失败: {e}")
+            return False
+
+    def disconnect_shared(self) -> None:
+        """释放共享串口引用（与 connect_shared 对称）。
+
+        注意：不关闭串口本身，串口由 XYZController 负责关闭。
+        """
+        try:
+            self.pipette.serial_port = None
+            self.pipette.lock = None
+            self.pipette.is_connected = False
+            self.xyz_controller = None
+            self.xyz_connected = False
+            logger.info("移液控制器已释放共享串口引用")
+        except Exception as e:
+            logger.error(f"disconnect_shared 失败: {e}")
+
     def initialize(self) -> bool:
         """初始化移液器"""
         try:
             if self.pipette.initialize():
                 logger.info("移液器初始化成功")
-                # 检查枪头状态
                 self._update_tip_status()
-                self.xyz_controller.home_all_axes()
-                self.xyz_controller.move_to_work_coord_safe(x=0, y=-150, z=0)
                 return True
             return False
         except Exception as e:
@@ -198,56 +231,58 @@ class PipetteController:
 
     def disconnect(self):
         """断开连接"""
-        # 断开移液器连接
+        if self.xyz_controller and self.xyz_connected:
+            if self.xyz_port != self.pipette_port:
+                try:
+                    self.xyz_controller.disconnect()
+                    logger.info("XYZ 步进电机已断开")
+                except Exception as e:
+                    logger.error(f"断开 XYZ 步进电机失败: {e}")
+            else:
+                self.xyz_controller.serial_conn = None
+            self.xyz_connected = False
+            self.xyz_controller = None
+
         self.pipette.disconnect()
         logger.info("移液器已断开")
-        
-        # 断开 XYZ 步进电机连接
-        if self.xyz_controller and self.xyz_connected:
-            try:
-                self.xyz_controller.disconnect()
-                self.xyz_connected = False
-                logger.info("XYZ 步进电机已断开")
-            except Exception as e:
-                logger.error(f"断开 XYZ 步进电机失败: {e}")
 
     def _check_xyz_safety(self, axis: MotorAxis, target_position: int) -> bool:
         """
         检查 XYZ 轴移动的安全性
-        
+
         Args:
             axis: 电机轴
             target_position: 目标位置(步数)
-            
+
         Returns:
             是否安全
         """
         try:
             # 获取当前电机状态
             motor_position = self.xyz_controller.get_motor_status(axis)
-            
+
             # 检查电机状态是否正常 (不是碰撞停止或限位停止)
-            if motor_position.status in [MotorStatus.COLLISION_STOP, 
-                                       MotorStatus.FORWARD_LIMIT_STOP, 
+            if motor_position.status in [MotorStatus.COLLISION_STOP,
+                                       MotorStatus.FORWARD_LIMIT_STOP,
                                        MotorStatus.REVERSE_LIMIT_STOP]:
                 logger.error(f"{axis.name} 轴电机处于错误状态: {motor_position.status.name}")
                 return False
-                
+
             # 检查位置限制 (扩大安全范围以适应实际硬件)
             # 步进电机的位置范围通常很大，这里设置更合理的范围
             if target_position < -500000 or target_position > 500000:
                 logger.error(f"{axis.name} 轴目标位置超出安全范围: {target_position}")
                 return False
-                
+
             # 检查移动距离是否过大 (单次移动不超过 20000 步，约12mm)
             current_position = motor_position.steps
             move_distance = abs(target_position - current_position)
             if move_distance > 20000:
                 logger.error(f"{axis.name} 轴单次移动距离过大: {move_distance}步")
                 return False
-                
+
             return True
-            
+
         except Exception as e:
             logger.error(f"安全检查失败: {e}")
             return False
@@ -255,48 +290,48 @@ class PipetteController:
     def move_z_relative(self, distance_mm: float, speed: int = 2000, acceleration: int = 500) -> bool:
         """
         Z轴相对移动
-        
+
         Args:
             distance_mm: 移动距离(mm)，正值向下，负值向上
             speed: 移动速度(rpm)
             acceleration: 加速度(rpm/s)
-            
+
         Returns:
             移动是否成功
         """
         if not self.xyz_controller or not self.xyz_connected:
             logger.error("XYZ 步进电机未连接，无法执行移动")
             return False
-            
+
         try:
             # 参数验证
             if abs(distance_mm) > 15.0:
                 logger.error(f"移动距离过大: {distance_mm}mm，最大允许15mm")
                 return False
-                
+
             if speed < 100 or speed > 5000:
                 logger.error(f"速度参数无效: {speed}rpm，范围应为100-5000")
                 return False
-                
+
             # 获取当前 Z 轴位置
             current_status = self.xyz_controller.get_motor_status(MotorAxis.Z)
             current_z_position = current_status.steps
-            
+
             # 计算移动距离对应的步数 (1mm = 1638.4步)
             mm_to_steps = 1638.4
             move_distance_steps = int(distance_mm * mm_to_steps)
-            
+
             # 计算目标位置
             target_z_position = current_z_position + move_distance_steps
-            
+
             # 安全检查
             if not self._check_xyz_safety(MotorAxis.Z, target_z_position):
                 logger.error("Z轴移动安全检查失败")
                 return False
-            
+
             logger.info(f"Z轴相对移动: {distance_mm}mm ({move_distance_steps}步)")
             logger.info(f"当前位置: {current_z_position}步 -> 目标位置: {target_z_position}步")
-            
+
             # 执行移动
             success = self.xyz_controller.move_to_position(
                 axis=MotorAxis.Z,
@@ -305,28 +340,28 @@ class PipetteController:
                 acceleration=acceleration,
                 precision=50
             )
-            
+
             if not success:
                 logger.error("Z轴移动命令发送失败")
                 return False
-                
+
             # 等待移动完成
             if not self.xyz_controller.wait_for_completion(MotorAxis.Z, timeout=10.0):
                 logger.error("Z轴移动超时")
                 return False
-                
+
             # 验证移动结果
             final_status = self.xyz_controller.get_motor_status(MotorAxis.Z)
             final_position = final_status.steps
             position_error = abs(final_position - target_z_position)
-            
+
             logger.info(f"Z轴移动完成，最终位置: {final_position}步，误差: {position_error}步")
-            
+
             if position_error > 100:
                 logger.warning(f"Z轴位置误差较大: {position_error}步")
-                
+
             return True
-            
+
         except ModbusException as e:
             logger.error(f"Modbus通信错误: {e}")
             return False
@@ -337,21 +372,20 @@ class PipetteController:
     def emergency_stop(self) -> bool:
         """
         紧急停止所有运动
-        
+
         Returns:
             停止是否成功
         """
         success = True
-        
-        # 停止移液器操作
+
         try:
-            if self.pipette and self.connected:
-                # 这里可以添加移液器的紧急停止逻辑
+            if self.pipette and self.pipette.is_connected:
+                self.pipette.emergency_stop()
                 logger.info("移液器紧急停止")
         except Exception as e:
             logger.error(f"移液器紧急停止失败: {e}")
             success = False
-            
+
         # 停止 XYZ 轴运动
         try:
             if self.xyz_controller and self.xyz_connected:
@@ -360,7 +394,7 @@ class PipetteController:
         except Exception as e:
             logger.error(f"XYZ 轴紧急停止失败: {e}")
             success = False
-            
+
         return success
 
     def pickup_tip(self) -> bool:
@@ -376,7 +410,7 @@ class PipetteController:
             return True
 
         logger.info("开始装载枪头 - Z轴向下移动10mm")
-        
+
         # 使用相对移动方法，向下移动10mm
         if self.move_z_relative(distance_mm=10.0, speed=2000, acceleration=500):
             # 更新枪头状态
@@ -688,31 +722,31 @@ class PipetteController:
 if __name__ == "__main__":
     # 配置日志
     import logging
-    
+
     # 设置日志级别
     logging.basicConfig(
         level=logging.INFO,
         format='%(asctime)s - %(name)s - %(levelname)s - %(message)s'
     )
-    
+
     def interactive_test():
         """交互式测试模式 - 适用于已连接的设备"""
         print("\n" + "=" * 60)
         print("🧪 移液器交互式测试模式")
         print("=" * 60)
-        
+
         # 获取用户输入的连接参数
         print("\n📡 设备连接配置:")
         port = input("请输入移液器串口端口 (默认: /dev/ttyUSB_CH340): ").strip() or "/dev/ttyUSB_CH340"
         address_input = input("请输入移液器设备地址 (默认: 4): ").strip()
         address = int(address_input) if address_input else 4
-        
+
         # 询问是否连接 XYZ 步进电机控制器
         xyz_enable = input("是否连接 XYZ 步进电机控制器? (y/N): ").strip().lower()
         xyz_port = None
         if xyz_enable not in ['n', 'no']:
             xyz_port = input("请输入 XYZ 控制器串口端口 (默认: /dev/ttyUSB_CH340): ").strip() or "/dev/ttyUSB_CH340"
-        
+
         try:
             # 创建移液控制器实例
             if xyz_port:
@@ -721,21 +755,21 @@ if __name__ == "__main__":
             else:
                 print(f"\n🔧 创建移液控制器实例 (端口: {port}, 地址: {address})...")
                 pipette = PipetteController(port=port, address=address)
-            
+
             # 连接设备
             print("\n📞 连接移液器设备...")
             if not pipette.connect():
                 print("❌ 设备连接失败，请检查连接")
                 return
             print("✅ 设备连接成功")
-            
+
             # 初始化设备
             print("\n🚀 初始化设备...")
             if not pipette.initialize():
                 print("❌ 设备初始化失败")
                 return
             print("✅ 设备初始化成功")
-            
+
             # 交互式菜单
             while True:
                 print("\n" + "=" * 50)
@@ -755,9 +789,9 @@ if __name__ == "__main__":
                 print("99. 🚨 紧急停止")
                 print("0. 🚪 退出程序")
                 print("=" * 50)
-                
+
                 choice = input("\n请选择操作 (0-12, 99): ").strip()
-                
+
                 if choice == "0":
                     print("\n👋 退出程序...")
                     break
@@ -773,7 +807,7 @@ if __name__ == "__main__":
                     # print(f"    🔧 枪头使用次数: {status['statistics']['tip_count']}")
                     print(f"    ⬆️  吸液次数: {status['statistics']['aspirate_count']}")
                     print(f"    ⬇️  排液次数: {status['statistics']['dispense_count']}")
-                
+
                 elif choice == "2":
                     # 装载枪头
                     print("\n🔧 装载枪头...")
@@ -781,14 +815,14 @@ if __name__ == "__main__":
                         print("📍 使用 XYZ 控制器进行 Z 轴定位 (下移 10mm)")
                     else:
                         print("⚠️  未连接 XYZ 控制器，仅执行移液器枪头装载")
-                    
+
                     if pipette.pickup_tip():
                         print("✅ 枪头装载成功")
                         if pipette.xyz_connected:
                             print("📍 Z 轴已移动到装载位置")
                     else:
                         print("❌ 枪头装载失败")
-                
+
                 elif choice == "3":
                     # 弹出枪头
                     print("\n🗑️ 弹出枪头...")
@@ -796,7 +830,7 @@ if __name__ == "__main__":
                         print("✅ 枪头弹出成功")
                     else:
                         print("❌ 枪头弹出失败")
-                
+
                 elif choice == "4":
                     # 吸液操作
                     try:
@@ -810,7 +844,7 @@ if __name__ == "__main__":
                             print("❌ 吸液失败")
                     except ValueError:
                         print("❌ 请输入有效的数字")
-                
+
                 elif choice == "5":
                     # 排液操作
                     try:
@@ -824,7 +858,7 @@ if __name__ == "__main__":
                             print("❌ 排液失败")
                     except ValueError:
                         print("❌ 请输入有效的数字")
-                
+
                 elif choice == "6":
                     # 混合操作
                     try:
@@ -838,7 +872,7 @@ if __name__ == "__main__":
                             print("❌ 混合失败")
                     except ValueError:
                         print("❌ 请输入有效的数字")
-                
+
                 elif choice == "7":
                     # 液体转移
                     try:
@@ -846,7 +880,7 @@ if __name__ == "__main__":
                         source = input("源孔位 (可选, 如A1): ").strip() or None
                         dest = input("目标孔位 (可选, 如B1): ").strip() or None
                         new_tip = input("是否使用新枪头? (y/n, 默认y): ").strip().lower() != 'n'
-                        
+
                         print(f"\n🔄 执行液体转移 ({volume}ul)...")
                         if pipette.transfer(volume=volume, source_well=source, dest_well=dest, new_tip=new_tip):
                             print("✅ 液体转移完成")
@@ -854,7 +888,7 @@ if __name__ == "__main__":
                             print("❌ 液体转移失败")
                     except ValueError:
                         print("❌ 请输入有效的数字")
-                
+
                 elif choice == "8":
                     # 设置液体类型
                     print("\n🧪 可用液体类型:")
@@ -864,16 +898,16 @@ if __name__ == "__main__":
                         "3": (LiquidClass.VISCOUS, "粘稠液体"),
                         "4": (LiquidClass.VOLATILE, "挥发性液体")
                     }
-                    
+
                     for key, (liquid_class, description) in liquid_options.items():
                         print(f"  {key}. {description}")
-                    
+
                     liquid_choice = input("请选择液体类型 (1-4): ").strip()
                     if liquid_choice in liquid_options:
                         liquid_class, description = liquid_options[liquid_choice]
                         pipette.set_liquid_class(liquid_class)
                         print(f"✅ 液体类型设置为: {description}")
-                        
+
                         # 显示参数
                         params = pipette.liquid_params
                         print(f"📋 参数设置:")
@@ -883,7 +917,7 @@ if __name__ == "__main__":
                         print(f"  💧 预润湿: {'是' if params.pre_wet else '否'}")
                     else:
                         print("❌ 无效选择")
-                
+
                 elif choice == "9":
                     # 自定义参数
                     try:
@@ -892,19 +926,19 @@ if __name__ == "__main__":
                         dispense_speed = input("排液速度 (默认800): ").strip()
                         air_gap = input("空气间隙 (ul, 默认10.0): ").strip()
                         pre_wet = input("预润湿 (y/n, 默认n): ").strip().lower() == 'y'
-                        
+
                         custom_params = LiquidParameters(
                             aspirate_speed=int(aspirate_speed) if aspirate_speed else 500,
                             dispense_speed=int(dispense_speed) if dispense_speed else 800,
                             air_gap=float(air_gap) if air_gap else 10.0,
                             pre_wet=pre_wet
                         )
-                        
+
                         pipette.set_custom_parameters(custom_params)
                         print("✅ 自定义参数设置完成")
                     except ValueError:
                         print("❌ 请输入有效的数字")
-                
+
                 elif choice == "10":
                     # 校准体积
                     try:
@@ -914,12 +948,12 @@ if __name__ == "__main__":
                         print(f"✅ 校准完成，校准系数: {actual/expected:.3f}")
                     except ValueError:
                         print("❌ 请输入有效的数字")
-                
+
                 elif choice == "11":
                     # 重置统计
                     pipette.reset_statistics()
                     print("✅ 统计信息已重置")
-                
+
                 elif choice == "12":
                     # 液体类型测试
                     print("\n🧪 液体类型参数对比:")
@@ -929,7 +963,7 @@ if __name__ == "__main__":
                         (LiquidClass.VISCOUS, "粘稠液体"),
                         (LiquidClass.VOLATILE, "挥发性液体")
                     ]
-                    
+
                     for liquid_class, description in liquid_tests:
                         params = pipette.LIQUID_PARAMS[liquid_class]
                         print(f"\n📋 {description} ({liquid_class.value}):")
@@ -938,7 +972,7 @@ if __name__ == "__main__":
                         print(f"  💨 空气间隙: {params.air_gap}ul")
                         print(f"  💧 预润湿: {'是' if params.pre_wet else '否'}")
                         print(f"  ⏱️ 吸液后延时: {params.delay_after_aspirate}s")
-                
+
                 elif choice == "99":
                     # 紧急停止
                     print("\n🚨 执行紧急停止...")
@@ -949,19 +983,19 @@ if __name__ == "__main__":
                     else:
                         print("❌ 紧急停止执行失败")
                         print("⚠️ 请手动检查设备状态并采取必要措施")
-                    
+
                     # 紧急停止后询问是否继续
                     continue_choice = input("\n是否继续操作？(y/n): ").strip().lower()
                     if continue_choice != 'y':
                         print("🚪 退出程序")
                         break
-                
+
                 else:
                     print("❌ 无效选择，请重新输入")
-                
+
                 # 等待用户确认继续
                 input("\n按回车键继续...")
-            
+
         except KeyboardInterrupt:
             print("\n\n⚠️ 用户中断操作")
         except Exception as e:
@@ -974,19 +1008,19 @@ if __name__ == "__main__":
                 print("✅ 连接已断开")
             except:
                 print("⚠️ 断开连接时出现问题")
-    
+
     def demo_test():
         """演示测试模式 - 完整功能演示"""
         print("\n" + "=" * 60)
         print("🎬 移液控制器演示测试")
         print("=" * 60)
-        
+
         try:
             # 创建移液控制器实例
             print("1. 🔧 创建移液控制器实例...")
             pipette = PipetteController(port="/dev/ttyUSB0", address=4)
             print("✅ 移液控制器实例创建成功")
-            
+
             # 连接设备
             print("\n2. 📞 连接移液器设备...")
             if pipette.connect():
@@ -994,7 +1028,7 @@ if __name__ == "__main__":
             else:
                 print("❌ 设备连接失败")
                 return False
-            
+
             # 初始化设备
             print("\n3. 🚀 初始化设备...")
             if pipette.initialize():
@@ -1002,19 +1036,19 @@ if __name__ == "__main__":
             else:
                 print("❌ 设备初始化失败")
                 return False
-            
+
             # 装载枪头
             print("\n4. 🔧 装载枪头...")
             if pipette.pickup_tip():
                 print("✅ 枪头装载成功")
             else:
                 print("❌ 枪头装载失败")
-            
+
             # 设置液体类型
             print("\n5. 🧪 设置液体类型为血清...")
             pipette.set_liquid_class(LiquidClass.SERUM)
             print("✅ 液体类型设置完成")
-            
+
             # 吸液操作
             print("\n6. 💧 执行吸液操作...")
             volume_to_aspirate = 100.0
@@ -1023,7 +1057,7 @@ if __name__ == "__main__":
                 print(f"📊 当前体积: {pipette.current_volume}ul")
             else:
                 print("❌ 吸液失败")
-            
+
             # 排液操作
             print("\n7. 💦 执行排液操作...")
             volume_to_dispense = 50.0
@@ -1032,14 +1066,14 @@ if __name__ == "__main__":
                 print(f"📊 剩余体积: {pipette.current_volume}ul")
             else:
                 print("❌ 排液失败")
-            
+
             # 混合操作
             print("\n8. 🌀 执行混合操作...")
             if pipette.mix(cycles=3, volume=30.0):
                 print("✅ 混合完成")
             else:
                 print("❌ 混合失败")
-            
+
             # 获取状态信息
             print("\n9. 📊 获取设备状态...")
             status = pipette.get_status()
@@ -1052,30 +1086,30 @@ if __name__ == "__main__":
             # print(f"    🔧 枪头使用次数: {status['statistics']['tip_count']}")
             print(f"    ⬆️ 吸液次数: {status['statistics']['aspirate_count']}")
             print(f"    ⬇️ 排液次数: {status['statistics']['dispense_count']}")
-            
+
             # 弹出枪头
             print("\n10. 🗑️ 弹出枪头...")
             if pipette.eject_tip():
                 print("✅ 枪头弹出成功")
             else:
                 print("❌ 枪头弹出失败")
-            
+
             print("\n" + "=" * 60)
             print("✅ 移液控制器演示测试完成")
             print("=" * 60)
-            
+
             return True
-            
+
         except Exception as e:
             print(f"\n❌ 测试过程中发生异常: {e}")
             return False
-            
+
         finally:
             # 断开连接
             print("\n📞 断开连接...")
             pipette.disconnect()
             print("✅ 连接已断开")
-    
+
     # 主程序入口
     print("🧪 移液器控制器测试程序")
     print("=" * 40)
@@ -1083,9 +1117,9 @@ if __name__ == "__main__":
     print("2. 🎬 演示测试")
     print("0. 🚪 退出")
     print("=" * 40)
-    
+
     mode = input("请选择测试模式 (0-2): ").strip()
-    
+
     if mode == "1":
         interactive_test()
     elif mode == "2":
@@ -1094,7 +1128,7 @@ if __name__ == "__main__":
         print("👋 再见！")
     else:
         print("❌ 无效选择")
-    
+
     print("\n🎉 程序结束！")
     print("\n💡 使用说明:")
     print("1. 确保移液器硬件已正确连接")

unilabos/devices/liquid_handling/laiyu/laiyu.py

@@ -13,7 +13,7 @@ from pylabrobot.liquid_handling import (
     SingleChannelDispense,
     PickupTipRack,
     DropTipRack,
-    MultiHeadAspirationPlate, ChatterBoxBackend, LiquidHandlerChatterboxBackend,
+    MultiHeadAspirationPlate,
 )
 from pylabrobot.liquid_handling.standard import (
     MultiHeadAspirationContainer,
@@ -41,12 +41,6 @@ class TransformXYZDeck(Deck):
         super().__init__(name, size_x, size_y, size_z)
         self.name = name
 
-class TransformXYZBackend(LiquidHandlerBackend):
-    def __init__(self, name: str, host: str, port: int, timeout: float):
-        super().__init__()
-        self.host = host
-        self.port = port
-        self.timeout = timeout
 
 class TransformXYZRvizBackend(UniLiquidHandlerRvizBackend):
     def __init__(self, name: str, channel_num: int):
@@ -86,7 +80,9 @@ class TransformXYZContainer(Plate, TipRack):
 class TransformXYZHandler(LiquidHandlerAbstract):
     support_touch_tip = False
 
-    def __init__(self, deck: Deck, host: str = "127.0.0.1", port: int = 9999, timeout: float = 10.0, channel_num=1, simulator=True, **backend_kwargs):
+    def __init__(self, deck: Deck, host: str = "127.0.0.1", port: int = 9999, timeout: float = 10.0, channel_num=1, simulator=True,
+                 serial_port: str = "/dev/ttyUSB0", baudrate: int = 115200, pipette_address: int = 4,
+                 total_height: float = 310, **backend_kwargs):
         # Handle case where deck is passed as a dict (from serialization)
         if isinstance(deck, dict):
             # Try to create a TransformXYZDeck from the dict
@@ -102,11 +98,22 @@ class TransformXYZHandler(LiquidHandlerAbstract):
                 deck = TransformXYZDeck(name='deck', size_x=100, size_y=100, size_z=100)
 
         if simulator:
-            self._unilabos_backend = TransformXYZRvizBackend(name="laiyu",channel_num=channel_num)
+            self._unilabos_backend = TransformXYZRvizBackend(name="laiyu", channel_num=channel_num)
         else:
-            self._unilabos_backend = TransformXYZBackend(name="laiyu",host=host, port=port, timeout=timeout)
+            self._unilabos_backend = UniLiquidHandlerLaiyuBackend(
+                num_channels=channel_num,
+                total_height=total_height,
+                port=serial_port,
+                baudrate=baudrate,
+                pipette_address=pipette_address,
+            )
         super().__init__(backend=self._unilabos_backend, deck=deck, simulator=simulator, channel_num=channel_num)
 
+    def post_init(self, ros_node):
+        super().post_init(ros_node)
+        if hasattr(self._unilabos_backend, 'post_init'):
+            self._unilabos_backend.post_init(ros_node)
+
     async def add_liquid(
         self,
         asp_vols: Union[List[float], float],
@@ -128,7 +135,25 @@ class TransformXYZHandler(LiquidHandlerAbstract):
         mix_liquid_height: Optional[float] = None,
         none_keys: List[str] = [],
     ):
-        pass
+        return await super().add_liquid(
+            asp_vols=asp_vols,
+            dis_vols=dis_vols,
+            reagent_sources=reagent_sources,
+            targets=targets,
+            use_channels=use_channels,
+            flow_rates=flow_rates,
+            offsets=offsets,
+            liquid_height=liquid_height,
+            blow_out_air_volume=blow_out_air_volume,
+            spread=spread,
+            is_96_well=is_96_well,
+            delays=delays,
+            mix_time=mix_time,
+            mix_vol=mix_vol,
+            mix_rate=mix_rate,
+            mix_liquid_height=mix_liquid_height,
+            none_keys=none_keys,
+        )
 
     async def aspirate(
         self,
@@ -142,7 +167,17 @@ class TransformXYZHandler(LiquidHandlerAbstract):
         spread: Literal["wide", "tight", "custom"] = "wide",
         **backend_kwargs,
     ):
-        pass
+        return await super().aspirate(
+            resources=resources,
+            vols=vols,
+            use_channels=use_channels,
+            flow_rates=flow_rates,
+            offsets=offsets,
+            liquid_height=liquid_height,
+            blow_out_air_volume=blow_out_air_volume,
+            spread=spread,
+            **backend_kwargs,
+        )
 
     async def dispense(
         self,
@@ -156,7 +191,17 @@ class TransformXYZHandler(LiquidHandlerAbstract):
         spread: Literal["wide", "tight", "custom"] = "wide",
         **backend_kwargs,
     ):
-        pass
+        return await super().dispense(
+            resources=resources,
+            vols=vols,
+            use_channels=use_channels,
+            flow_rates=flow_rates,
+            offsets=offsets,
+            liquid_height=liquid_height,
+            blow_out_air_volume=blow_out_air_volume,
+            spread=spread,
+            **backend_kwargs,
+        )
 
     async def drop_tips(
         self,
@@ -166,7 +211,13 @@ class TransformXYZHandler(LiquidHandlerAbstract):
         allow_nonzero_volume: bool = False,
         **backend_kwargs,
     ):
-        pass
+        return await super().drop_tips(
+            tip_spots=tip_spots,
+            use_channels=use_channels,
+            offsets=offsets,
+            allow_nonzero_volume=allow_nonzero_volume,
+            **backend_kwargs,
+        )
 
     async def mix(
         self,
@@ -178,7 +229,15 @@ class TransformXYZHandler(LiquidHandlerAbstract):
         mix_rate: Optional[float] = None,
         none_keys: List[str] = [],
     ):
-        pass
+        return await super().mix(
+            targets=targets,
+            mix_time=mix_time,
+            mix_vol=mix_vol,
+            height_to_bottom=height_to_bottom,
+            offsets=offsets,
+            mix_rate=mix_rate,
+            none_keys=none_keys,
+        )
 
     async def pick_up_tips(
         self,
@@ -187,7 +246,12 @@ class TransformXYZHandler(LiquidHandlerAbstract):
         offsets: Optional[List[Coordinate]] = None,
         **backend_kwargs,
     ):
-        pass
+        return await super().pick_up_tips(
+            tip_spots=tip_spots,
+            use_channels=use_channels,
+            offsets=offsets,
+            **backend_kwargs,
+        )
 
     async def transfer_liquid(
         self,
@@ -214,5 +278,26 @@ class TransformXYZHandler(LiquidHandlerAbstract):
         delays: Optional[List[int]] = None,
         none_keys: List[str] = [],
     ):
-        pass
-    
+        return await super().transfer_liquid(
+            sources=sources,
+            targets=targets,
+            tip_racks=tip_racks,
+            use_channels=use_channels,
+            asp_vols=asp_vols,
+            dis_vols=dis_vols,
+            asp_flow_rates=asp_flow_rates,
+            dis_flow_rates=dis_flow_rates,
+            offsets=offsets,
+            touch_tip=touch_tip,
+            liquid_height=liquid_height,
+            blow_out_air_volume=blow_out_air_volume,
+            spread=spread,
+            is_96_well=is_96_well,
+            mix_stage=mix_stage,
+            mix_times=mix_times,
+            mix_vol=mix_vol,
+            mix_rate=mix_rate,
+            mix_liquid_height=mix_liquid_height,
+            delays=delays,
+            none_keys=none_keys,
+        )

unilabos/devices/liquid_handling/prcxi/prcxi.py

@@ -45,7 +45,6 @@ from pylabrobot.resources import (
     Trash,
     PlateAdapter,
     TubeRack,
-    create_homogeneous_resources,
 )
 
 from unilabos.devices.liquid_handling.liquid_handler_abstract import (
@@ -56,8 +55,8 @@ from unilabos.devices.liquid_handling.liquid_handler_abstract import (
     TransferLiquidReturn,
 )
 from unilabos.registry.placeholder_type import ResourceSlot
-from unilabos.resources.itemized_carrier import ItemizedCarrier
-from unilabos.ros.nodes.base_device_node import BaseROS2DeviceNode, ROS2DeviceNode
+from unilabos.resources.resource_tracker import ResourceTreeSet
+from unilabos.ros.nodes.base_device_node import BaseROS2DeviceNode
 
 
 class PRCXIError(RuntimeError):
@@ -93,14 +92,18 @@ class PRCXI9300Deck(Deck):
     """
 
     # T1-T16 默认位置 (4列×4行)
-    _DEFAULT_SITE_POSITIONS = [((i%4)*137.5+5, (3-int(i/4))*96+13, 0) for i in range(0, 16)]
-
+    _DEFAULT_SITE_POSITIONS = [
+        (0, 0, 0), (138, 0, 0), (276, 0, 0), (414, 0, 0),         # T1-T4
+        (0, 96, 0), (138, 96, 0), (276, 96, 0), (414, 96, 0),     # T5-T8
+        (0, 192, 0), (138, 192, 0), (276, 192, 0), (414, 192, 0), # T9-T12
+        (0, 288, 0), (138, 288, 0), (276, 288, 0), (414, 288, 0), # T13-T16
+    ]
     _DEFAULT_SITE_SIZE = {"width": 128.0, "height": 86, "depth": 0}
     _DEFAULT_CONTENT_TYPE = ["plate", "tip_rack", "plates", "tip_racks", "tube_rack", "adaptor"]
 
     def __init__(self, name: str, size_x: float, size_y: float, size_z: float,
                  sites: Optional[List[Dict[str, Any]]] = None, **kwargs):
-        super().__init__( size_x, size_y, size_z, name=name)
+        super().__init__(size_x, size_y, size_z, name)
         if sites is not None:
             self.sites: List[Dict[str, Any]] = [dict(s) for s in sites]
         else:
@@ -117,7 +120,6 @@ class PRCXI9300Deck(Deck):
         self._ordering = collections.OrderedDict(
             (site["label"], None) for site in self.sites
         )
-        self.root = self.get_root()
 
     def _get_site_location(self, idx: int) -> Coordinate:
         pos = self.sites[idx]["position"]
@@ -160,10 +162,7 @@ class PRCXI9300Deck(Deck):
             raise ValueError(f"No available site on deck '{self.name}' for resource '{resource.name}'")
 
         if not reassign and self._get_site_resource(idx) is not None:
-            existing = self.root.get_resource(resource.name)
-            if existing is not resource and existing.parent is not None:
-                existing.parent.unassign_child_resource(existing)
-
+            raise ValueError(f"Site {idx} ('{self.sites[idx]['label']}') is already occupied")
 
         loc = self._get_site_location(idx)
         super().assign_child_resource(resource, location=loc, reassign=reassign)
@@ -259,30 +258,9 @@ class PRCXI9300Plate(Plate):
                 elif value is None:
                     ordering_param = ordering
             else:
-                # ordering 的值是对象（可能是 Well 对象），检查是否有有效的 location
-                # 如果是反序列化过程，Well 对象可能没有正确的 location，需要让 Plate 重新创建
-                sample_value = next(iter(ordering.values()), None)
-                if sample_value is not None and hasattr(sample_value, 'location'):
-                    # 如果是 Well 对象但 location 为 None，说明是反序列化过程
-                    # 让 Plate 自己创建 Well 对象
-                    if sample_value.location is None:
-                        items = None
-                        ordering_param = collections.OrderedDict((k, None) for k in ordering.keys())
-                    else:
-                        # Well 对象有有效的 location，可以直接使用
-                        items = ordering
-                        ordering_param = None
-                elif sample_value is None:
-                    # ordering 的值都是 None，让 Plate 自己创建 Well 对象
-                    items = None
-                    ordering_param = collections.OrderedDict((k, None) for k in ordering.keys())
-                else:
-                    # 其他情况，直接使用
-                    items = ordering
-                    ordering_param = None
-        else:
-            items = None
-            ordering_param = collections.OrderedDict()  # 提供空的 ordering
+                # ordering 的值已经是对象，可以直接使用
+                items = ordering
+                ordering_param = None
 
         # 根据情况传递不同的参数
         if items is not None:
@@ -364,16 +342,9 @@ class PRCXI9300TipRack(TipRack):
                 items = None
                 ordering_param = collections.OrderedDict((k, None) for k in ordering.keys())
             else:
-                # ordering 的值已经是对象，需要过滤掉 None 值
-                # 只保留有效的对象，用于 ordered_items 参数
-                valid_items = {k: v for k, v in ordering.items() if v is not None}
-                if valid_items:
-                    items = valid_items
-                    ordering_param = None
-                else:
-                    # 如果没有有效对象，使用 ordering 参数
-                    items = None
-                    ordering_param = collections.OrderedDict((k, None) for k in ordering.keys())
+                # ordering 的值已经是对象，可以直接使用
+                items = ordering
+                ordering_param = None
         else:
             items = None
             ordering_param = None
@@ -432,11 +403,17 @@ class PRCXI9300Trash(Trash):
     该类定义了 PRCXI 9300 的工作台布局和槽位信息。
     """
 
-    def __init__(self, name: str, size_x: float, size_y: float, size_z: float, 
-                 category: str = "plate", 
-                 material_info: Optional[Dict[str, Any]] = None,
-                 **kwargs):
-        
+    def __init__(
+        self,
+        name: str,
+        size_x: float,
+        size_y: float,
+        size_z: float,
+        category: str = "trash",
+        material_info: Optional[Dict[str, Any]] = None,
+        **kwargs,
+    ):
+
         if name != "trash":
             print(f"Warning: PRCXI9300Trash usually expects name='trash' for backend logic, but got '{name}'.")
         super().__init__(name, size_x, size_y, size_z, **kwargs)
@@ -504,25 +481,20 @@ class PRCXI9300TubeRack(TubeRack):
             items_to_pass = ordered_items
             ordering_param = None
         elif ordering is not None:
-            # 检查 ordering 中的值是否是字符串（从 JSON 反序列化时的情况）
-            if ordering and isinstance(next(iter(ordering.values()), None), str):
-                # ordering 的值是字符串，这种情况下我们让 TubeRack 使用默认行为
-                # 不在初始化时创建 items，而是在 deserialize 后处理
+            # 检查 ordering 中的值类型来决定如何处理：
+            # - 字符串值（从 JSON 反序列化）: 只用键创建 ordering_param
+            # - None 值（从第二次往返序列化）: 同样只用键创建 ordering_param
+            # - 对象值（已经是实际的 Resource 对象）: 直接作为 ordered_items 使用
+            first_val = next(iter(ordering.values()), None) if ordering else None
+            if not ordering or first_val is None or isinstance(first_val, str):
+                # ordering 的值是字符串或 None，只使用键（位置信息）创建新的 OrderedDict
+                # 传递 ordering 参数而不是 ordered_items，让 TubeRack 自己创建 Tube 对象
                 items_to_pass = None
-                ordering_param = collections.OrderedDict((k, None) for k in ordering.keys())  # 提供空的 ordering 来满足要求
-                # 保存 ordering 信息以便后续处理
-                self._temp_ordering = ordering
+                ordering_param = collections.OrderedDict((k, None) for k in ordering.keys())
             else:
-                # ordering 的值已经是对象，需要过滤掉 None 值
-                # 只保留有效的对象，用于 ordered_items 参数
-                valid_items = {k: v for k, v in ordering.items() if v is not None}
-                if valid_items:
-                    items_to_pass = valid_items
-                    ordering_param = None
-                else:
-                    # 如果没有有效对象，创建空的 ordered_items
-                    items_to_pass = {}
-                    ordering_param = None
+                # ordering 的值已经是对象，可以直接使用
+                items_to_pass = ordering
+                ordering_param = None
         elif items is not None:
             # 兼容旧的 items 参数
             items_to_pass = items
@@ -544,29 +516,6 @@ class PRCXI9300TubeRack(TubeRack):
         if material_info:
             self._unilabos_state["Material"] = material_info
 
-        # 如果有临时 ordering 信息，在初始化完成后处理
-        if hasattr(self, '_temp_ordering') and self._temp_ordering:
-            self._process_temp_ordering()
-
-    def _process_temp_ordering(self):
-        """处理临时的 ordering 信息，创建相应的 Tube 对象"""
-        from pylabrobot.resources import Tube, Coordinate
-
-        for location, item_type in self._temp_ordering.items():
-            if item_type == 'Tube' or item_type == 'tube':
-                # 为每个位置创建 Tube 对象
-                tube = Tube(name=f"{self.name}_{location}", size_x=10, size_y=10, size_z=50, max_volume=2000.0)
-                # 使用 assign_child_resource 添加到 rack 中
-                self.assign_child_resource(tube, location=Coordinate(0, 0, 0))
-
-        # 清理临时数据
-        del self._temp_ordering
-
-    def load_state(self, state: Dict[str, Any]) -> None:
-        """从给定的状态加载工作台信息。"""
-        # super().load_state(state)
-        self._unilabos_state = state
-
     def serialize_state(self) -> Dict[str, Dict[str, Any]]:
         try:
             data = super().serialize_state()
@@ -593,97 +542,6 @@ class PRCXI9300TubeRack(TubeRack):
 
             data.update(safe_state)
         return data
-class PRCXI9300PlateAdapterSite(ItemizedCarrier):
-    def __init__(self, name: str, size_x: float, size_y: float, size_z: float,
-                 material_info: Optional[Dict[str, Any]] = None, **kwargs):
-        # 处理 sites 参数的不同格式
-
-        sites = create_homogeneous_resources(
-        klass=ResourceHolder,
-        locations=[Coordinate(0, 0, 0)],
-        resource_size_x=size_x,
-        resource_size_y=size_y,
-        resource_size_z=size_z,
-        name_prefix=name,
-        )[0]
-        
-        # 确保不传递重复的参数
-        kwargs.pop('layout', None)
-        sites_in = kwargs.pop('sites', None)
-
-        # 创建默认的sites字典
-        sites_dict = {name: sites}
-        # 优先从 sites_in 读取 'content_type'，否则使用默认值
-
-        content_type = [
-              "plate",
-              "tip_rack",
-              "plates",
-              "tip_racks",
-              "tube_rack"
-            ]
-        # 如果提供了sites参数，则用sites_in中的值替换sites_dict中对应的元素
-        if sites_in is not None and isinstance(sites_in, dict):
-            for site_key, site_value in sites_in.items():
-                if site_key in sites_dict:
-                    sites_dict[site_key] = site_value
-        
-        super().__init__(name, size_x, size_y, size_z,
-        sites=sites_dict,
-        num_items_x=kwargs.pop('num_items_x', 1),
-        num_items_y=kwargs.pop('num_items_y', 1),
-        num_items_z=kwargs.pop('num_items_z', 1),
-        content_type=content_type,
-        **kwargs)
-        self._unilabos_state = {}
-        if material_info:
-            self._unilabos_state["Material"] = material_info
-
-
-    def assign_child_resource(self, resource, location=Coordinate(0, 0, 0), reassign=True, spot=None):
-        """重写 assign_child_resource 方法，对于适配器位置，不使用索引分配"""
-        # 直接调用 Resource 的 assign_child_resource，避免 ItemizedCarrier 的索引逻辑
-        from pylabrobot.resources.resource import Resource
-        Resource.assign_child_resource(self, resource, location=location, reassign=reassign)
-
-    def unassign_child_resource(self, resource):
-        """重写 unassign_child_resource 方法，对于适配器位置，不使用 sites 列表"""
-        # 直接调用 Resource 的 unassign_child_resource，避免 ItemizedCarrier 的 sites 逻辑
-        from pylabrobot.resources.resource import Resource
-        Resource.unassign_child_resource(self, resource)
-
-    def serialize_state(self) -> Dict[str, Dict[str, Any]]:
-        try:
-            data = super().serialize_state()
-        except AttributeError:
-            data = {}
-
-        # 包含 sites 配置信息，但避免序列化 ResourceHolder 对象
-        if hasattr(self, 'sites') and self.sites:
-            # 只保存 sites 的基本信息，不保存 ResourceHolder 对象本身
-            sites_info = []
-            for site in self.sites:
-                if hasattr(site, '__class__') and 'pylabrobot' in str(site.__class__.__module__):
-                    # 对于 pylabrobot 对象，只保存基本信息
-                    sites_info.append({
-                        "__pylabrobot_object__": True,
-                        "class": site.__class__.__name__,
-                        "module": site.__class__.__module__,
-                        "name": getattr(site, 'name', str(site))
-                    })
-                else:
-                    sites_info.append(site)
-            data['sites'] = sites_info
-
-        return data
-
-    def load_state(self, state: Dict[str, Any]) -> None:
-        """加载状态，包括 sites 配置信息"""
-        super().load_state(state)
-
-        # 从状态中恢复 sites 配置信息
-        if 'sites' in state:
-            self.sites = [state['sites']]
 
 
 class PRCXI9300PlateAdapter(PlateAdapter):
@@ -776,7 +634,7 @@ class PRCXI9300Handler(LiquidHandlerAbstract):
 
     def __init__(
         self,
-        deck: Deck,
+        deck: PRCXI9300Deck,
         host: str,
         port: int,
         timeout: float,
@@ -788,51 +646,18 @@ class PRCXI9300Handler(LiquidHandlerAbstract):
         step_mode=False,
         matrix_id="",
         is_9320=False,
-        start_rail=2,
-        rail_nums=4,
-        rail_interval=0,
-        x_increase = -0.003636,
-        y_increase = -0.003636,
-        x_offset = -0.8,
-        y_offset = -37.98,
-        deck_z = 300,
-        deck_y = 400,
-        rail_width=27.5,
-        xy_coupling = -0.0045,
     ):
-
-        self.deck_x = (start_rail + rail_nums*5 + (rail_nums-1)*rail_interval) * rail_width
-        self.deck_y = deck_y
-        self.deck_z = deck_z
-        self.x_increase = x_increase
-        self.y_increase = y_increase
-        self.x_offset = x_offset
-        self.y_offset = y_offset
-        self.xy_coupling = xy_coupling
-
-        tablets_info = {}
-        plate_positions = []
-        for child in deck.children:
-            number = int(child.name.replace("T", ""))
-
-            if child.children:
-                if "Material" in child.children[0]._unilabos_state:
-                    tablets_info[number] = child.children[0]._unilabos_state["Material"].get("uuid", "730067cf07ae43849ddf4034299030e9")
-                else:
-                    tablets_info[number] = "730067cf07ae43849ddf4034299030e9"
-            else:
-                tablets_info[number] = "730067cf07ae43849ddf4034299030e9"
-            pos = self.plr_pos_to_prcxi(child)
-            plate_positions.append(
-                {
-                    "Number": number,
-                    "XPos": pos.x,
-                    "YPos": pos.y,
-                    "ZPos": pos.z
-                }
-            )
-
-        
+        tablets_info = []
+        for site_id in range(len(deck.sites)):
+            child = deck._get_site_resource(site_id)
+            # 如果放其他类型的物料，是不可以的
+            if hasattr(child, "_unilabos_state") and "Material" in child._unilabos_state:
+                number = site_id + 1
+                tablets_info.append(
+                    WorkTablets(
+                        Number=number, Code=f"T{number}", Material=child._unilabos_state["Material"]
+                    )
+                )
         if is_9320:
             print("当前设备是9320")
         # 始终初始化 step_mode 属性
@@ -842,38 +667,10 @@ class PRCXI9300Handler(LiquidHandlerAbstract):
                 self.step_mode = step_mode
             else:
                 print("9300设备不支持 单点动作模式")
-        
         self._unilabos_backend = PRCXI9300Backend(
-            tablets_info, plate_positions, host, port, timeout, channel_num, axis, setup, debug, matrix_id, is_9320,
-            x_increase, y_increase, x_offset, y_offset, 
-            deck_z, deck_x=self.deck_x, deck_y=self.deck_y, xy_coupling=xy_coupling
+            tablets_info, host, port, timeout, channel_num, axis, setup, debug, matrix_id, is_9320
         )
-
         super().__init__(backend=self._unilabos_backend, deck=deck, simulator=simulator, channel_num=channel_num)
-    
-    def plr_pos_to_prcxi(self, resource: Resource):
-        resource_pos = resource.get_absolute_location(x="c",y="c",z="t")
-        x = resource_pos.x 
-        y = resource_pos.y 
-        z = resource_pos.z
-        # 如果z等于0，则递归resource.parent的高度并向z加，使用get_size_z方法
-
-        parent = resource.parent
-        res_z = resource.location.z
-        while not isinstance(parent, LiquidHandlerAbstract) and (res_z == 0) and parent is not None:
-            z += parent.get_size_z()
-            res_z = parent.location.z
-            parent = getattr(parent, "parent", None)
-        
-        prcxi_x = (self.deck_x - x)*(1+self.x_increase) + self.x_offset + self.xy_coupling * (self.deck_y - y)
-        prcxi_y = (self.deck_y - y)*(1+self.y_increase) + self.y_offset
-        prcxi_z = self.deck_z - z
-
-        prcxi_x = min(max(0, prcxi_x),self.deck_x)
-        prcxi_y = min(max(0, prcxi_y),self.deck_y)
-        prcxi_z = min(max(0, prcxi_z),self.deck_z)
-
-        return Coordinate(prcxi_x, prcxi_y, prcxi_z)
 
     def post_init(self, ros_node: BaseROS2DeviceNode):
         super().post_init(ros_node)
@@ -997,7 +794,6 @@ class PRCXI9300Handler(LiquidHandlerAbstract):
         touch_tip: bool = False,
         liquid_height: Optional[List[Optional[float]]] = None,
         blow_out_air_volume: Optional[List[Optional[float]]] = None,
-        blow_out_air_volume_before: Optional[List[Optional[float]]] = None,
         spread: Literal["wide", "tight", "custom"] = "wide",
         is_96_well: bool = False,
         mix_stage: Optional[Literal["none", "before", "after", "both"]] = "none",
@@ -1008,9 +804,7 @@ class PRCXI9300Handler(LiquidHandlerAbstract):
         delays: Optional[List[int]] = None,
         none_keys: List[str] = [],
     ) -> TransferLiquidReturn:
-        if self.step_mode:
-            await self.create_protocol(f"transfer_liquid{time.time()}")
-        res =  await super().transfer_liquid(
+        return await super().transfer_liquid(
             sources,
             targets,
             tip_racks,
@@ -1023,7 +817,6 @@ class PRCXI9300Handler(LiquidHandlerAbstract):
             touch_tip=touch_tip,
             liquid_height=liquid_height,
             blow_out_air_volume=blow_out_air_volume,
-            blow_out_air_volume_before=blow_out_air_volume_before,
             spread=spread,
             is_96_well=is_96_well,
             mix_stage=mix_stage,
@@ -1034,9 +827,6 @@ class PRCXI9300Handler(LiquidHandlerAbstract):
             delays=delays,
             none_keys=none_keys,
         )
-        if self.step_mode:
-            await self.run_protocol()
-        return res
 
     async def custom_delay(self, seconds=0, msg=None):
         return await super().custom_delay(seconds, msg)
@@ -1053,10 +843,9 @@ class PRCXI9300Handler(LiquidHandlerAbstract):
         offsets: Optional[Coordinate] = None,
         mix_rate: Optional[float] = None,
         none_keys: List[str] = [],
-        use_channels: Optional[List[int]] = [0],
     ):
         return await self._unilabos_backend.mix(
-            targets, mix_time, mix_vol, height_to_bottom, offsets, mix_rate, none_keys, use_channels
+            targets, mix_time, mix_vol, height_to_bottom, offsets, mix_rate, none_keys
         )
 
     def iter_tips(self, tip_racks: Sequence[TipRack]) -> Iterator[Resource]:
@@ -1087,32 +876,18 @@ class PRCXI9300Handler(LiquidHandlerAbstract):
         spread: Literal["wide", "tight", "custom"] = "wide",
         **backend_kwargs,
     ):
-        try:
-            return await super().aspirate(
-                resources,
-                vols,
-                use_channels,
-                flow_rates,
-                offsets,
-                liquid_height,
-                blow_out_air_volume,
-                spread,
-                **backend_kwargs,
-            )
-        except ValueError as e:
-            if "Resource is too small to space channels" in str(e) and spread != "custom":
-                return await super().aspirate(
-                    resources,
-                    vols,
-                    use_channels,
-                    flow_rates,
-                    offsets,
-                    liquid_height,
-                    blow_out_air_volume,
-                    spread="custom",
-                    **backend_kwargs,
-                )
-            raise
+
+        return await super().aspirate(
+            resources,
+            vols,
+            use_channels,
+            flow_rates,
+            offsets,
+            liquid_height,
+            blow_out_air_volume,
+            spread,
+            **backend_kwargs,
+        )
 
     async def drop_tips(
         self,
@@ -1136,33 +911,17 @@ class PRCXI9300Handler(LiquidHandlerAbstract):
         spread: Literal["wide", "tight", "custom"] = "wide",
         **backend_kwargs,
     ):
-        try:
-            return await super().dispense(
-                resources,
-                vols,
-                use_channels,
-                flow_rates,
-                offsets,
-                liquid_height,
-                blow_out_air_volume,
-                spread,
-                **backend_kwargs,
-            )
-        except ValueError as e:
-            if "Resource is too small to space channels" in str(e) and spread != "custom":
-                # 目标资源过小无法分布多通道时，退化为 custom（所有通道对准中心）
-                return await super().dispense(
-                    resources,
-                    vols,
-                    use_channels,
-                    flow_rates,
-                    offsets,
-                    liquid_height,
-                    blow_out_air_volume,
-                    "custom",
-                    **backend_kwargs,
-                )
-            raise
+        return await super().dispense(
+            resources,
+            vols,
+            use_channels,
+            flow_rates,
+            offsets,
+            liquid_height,
+            blow_out_air_volume,
+            spread,
+            **backend_kwargs,
+        )
 
     async def discard_tips(
         self,
@@ -1182,11 +941,6 @@ class PRCXI9300Handler(LiquidHandlerAbstract):
     async def shaker_action(self, time: int, module_no: int, amplitude: int, is_wait: bool):
         return await self._unilabos_backend.shaker_action(time, module_no, amplitude, is_wait)
 
-    async def magnetic_action(self, time: int, module_no: int, height: int, is_wait: bool):
-        return await self._unilabos_backend.magnetic_action(time, module_no, height, is_wait)
-    
-    async def shaking_incubation_action(self, time: int, module_no: int, amplitude: int, is_wait: bool, temperature: int):
-        return await self._unilabos_backend.shaking_incubation_action(time, module_no, amplitude, is_wait, temperature)
     async def heater_action(self, temperature: float, time: int):
         return await self._unilabos_backend.heater_action(temperature, time)
 
@@ -1203,7 +957,7 @@ class PRCXI9300Handler(LiquidHandlerAbstract):
         **backend_kwargs,
     ):
 
-        res = await super().move_plate(
+        return await super().move_plate(
             plate,
             to,
             intermediate_locations,
@@ -1215,12 +969,6 @@ class PRCXI9300Handler(LiquidHandlerAbstract):
             target_plate_number=to,
             **backend_kwargs,
         )
-        plate.unassign()
-        to.assign_child_resource(plate, location=Coordinate(0, 0, 0))
-        ROS2DeviceNode.run_async_func(self._ros_node.update_resource, True, **{
-            "resources": [self.deck]
-        })
-        return res
 
 
 class PRCXI9300Backend(LiquidHandlerBackend):
@@ -1245,7 +993,6 @@ class PRCXI9300Backend(LiquidHandlerBackend):
     def __init__(
         self,
         tablets_info: list[WorkTablets],
-        plate_positions: dict[int, Coordinate],
         host: str = "127.0.0.1",
         port: int = 9999,
         timeout: float = 10.0,
@@ -1254,19 +1001,10 @@ class PRCXI9300Backend(LiquidHandlerBackend):
         setup=True,
         debug=False,
         matrix_id="",
-        is_9320=False, 
-        x_increase = 0,
-        y_increase = 0,
-        x_offset = 0,
-        y_offset = 0,
-        deck_z = 300,
-        deck_x = 0,
-        deck_y = 0,
-        xy_coupling = 0.0,
+        is_9320=False,
     ) -> None:
         super().__init__()
         self.tablets_info = tablets_info
-        self.plate_positions = plate_positions
         self.matrix_id = matrix_id
         self.api_client = PRCXI9300Api(host, port, timeout, axis, debug, is_9320)
         self.host, self.port, self.timeout = host, port, timeout
@@ -1274,15 +1012,6 @@ class PRCXI9300Backend(LiquidHandlerBackend):
         self._execute_setup = setup
         self.debug = debug
         self.axis = "Left"
-        self.x_increase = x_increase
-        self.y_increase = y_increase
-        self.xy_coupling = xy_coupling
-        self.x_offset = x_offset
-        self.y_offset = y_offset
-        self.deck_x = deck_x
-        self.deck_y = deck_y
-        self.deck_z = deck_z
-        self.tip_length = 0
 
     async def shaker_action(self, time: int, module_no: int, amplitude: int, is_wait: bool):
         step = self.api_client.shaker_action(
@@ -1294,27 +1023,6 @@ class PRCXI9300Backend(LiquidHandlerBackend):
         self.steps_todo_list.append(step)
         return step
 
-    async def shaking_incubation_action(self, time: int, module_no: int, amplitude: int, is_wait: bool, temperature: int):
-        step = self.api_client.shaking_incubation_action(
-            time=time,
-            module_no=module_no,
-            amplitude=amplitude,
-            is_wait=is_wait,
-            temperature=temperature,
-        )
-        self.steps_todo_list.append(step)
-        return step
-
-    async def magnetic_action(self, time: int, module_no: int, height: int, is_wait: bool): 
-        step = self.api_client.magnetic_action(
-            time=time,
-            module_no=module_no,
-            height=height,
-            is_wait=is_wait,
-        )
-        self.steps_todo_list.append(step)
-        return step
-
     async def pick_up_resource(self, pickup: ResourcePickup, **backend_kwargs):
 
         resource = pickup.resource
@@ -1353,42 +1061,29 @@ class PRCXI9300Backend(LiquidHandlerBackend):
         self._ros_node = ros_node
 
     def create_protocol(self, protocol_name):
-        if protocol_name == "":
-            protocol_name = f"protocol_{time.time()}"
         self.protocol_name = protocol_name
         self.steps_todo_list = []
 
-        if not len(self.matrix_id):
-            self.matrix_id = str(uuid.uuid4())
-            
-            material_list = self.api_client.get_all_materials()
-            material_dict = {material["uuid"]: material for material in material_list}
-            
-            work_tablets = []
-            for num, material_id in self.tablets_info.items():
-                work_tablets.append({
-                    "Number": num,
-                    "Material": material_dict[material_id]
-                })
-
-            self.matrix_info = {
-                "MatrixId": self.matrix_id,
-                "MatrixName": self.matrix_id,
-                "WorkTablets": work_tablets,
-                }
-            # print(json.dumps(self.matrix_info, indent=2))
-            res = self.api_client.add_WorkTablet_Matrix(self.matrix_info)
-            if not res["Success"]:
-                self.matrix_id = ""
-                raise AssertionError(f"Failed to create matrix: {res.get('Message', 'Unknown error')}")
-            print(f"PRCXI9300Backend created matrix with ID: {self.matrix_info['MatrixId']}, result: {res}")
-
     def run_protocol(self):
         assert self.is_reset_ok, "PRCXI9300Backend is not reset successfully. Please call setup() first."
         run_time = time.time()
-        solution_id = self.api_client.add_solution(
-            f"protocol_{run_time}", self.matrix_id, self.steps_todo_list
+        self.matrix_info = MatrixInfo(
+            MatrixId=f"{int(run_time)}",
+            MatrixName=f"protocol_{run_time}",
+            MatrixCount=len(self.tablets_info),
+            WorkTablets=self.tablets_info,
         )
+        # print(json.dumps(self.matrix_info, indent=2))
+        if not len(self.matrix_id):
+            res = self.api_client.add_WorkTablet_Matrix(self.matrix_info)
+            assert res["Success"], f"Failed to create matrix: {res.get('Message', 'Unknown error')}"
+            print(f"PRCXI9300Backend created matrix with ID: {self.matrix_info['MatrixId']}, result: {res}")
+            solution_id = self.api_client.add_solution(
+                f"protocol_{run_time}", self.matrix_info["MatrixId"], self.steps_todo_list
+            )
+        else:
+            print(f"PRCXI9300Backend using predefined worktable {self.matrix_id}, skipping matrix creation.")
+            solution_id = self.api_client.add_solution(f"protocol_{run_time}", self.matrix_id, self.steps_todo_list)
         print(f"PRCXI9300Backend created solution with ID: {solution_id}")
         self.api_client.load_solution(solution_id)
         print(json.dumps(self.steps_todo_list, indent=2))
@@ -1431,9 +1126,6 @@ class PRCXI9300Backend(LiquidHandlerBackend):
                     else:
                         await asyncio.sleep(1)
                 print("PRCXI9300 reset successfully.")
-                
-                self.api_client.update_clamp_jaw_position(self.matrix_id, self.plate_positions)
-
         except ConnectionRefusedError as e:
             raise RuntimeError(
                 f"Failed to connect to PRCXI9300 API at {self.host}:{self.port}. "
@@ -1482,7 +1174,7 @@ class PRCXI9300Backend(LiquidHandlerBackend):
         PlateNo = plate_indexes[0] + 1
         hole_col = tip_columns[0] + 1
         hole_row = 1
-        if self.num_channels != 8:
+        if self._num_channels == 1:
             hole_row = tipspot_index % 8 + 1
 
         step = self.api_client.Load(
@@ -1495,7 +1187,7 @@ class PRCXI9300Backend(LiquidHandlerBackend):
             blending_times=0,
             balance_height=0,
             plate_or_hole=f"H{hole_col}-8,T{PlateNo}",
-            hole_numbers=f"{(hole_col - 1) * 8 + hole_row}" if self._num_channels != 8 else "1,2,3,4,5",
+            hole_numbers=f"{(hole_col - 1) * 8 + hole_row}" if self._num_channels == 1 else "1,2,3,4,5",
         )
         self.steps_todo_list.append(step)
 
@@ -1556,7 +1248,7 @@ class PRCXI9300Backend(LiquidHandlerBackend):
         PlateNo = plate_indexes[0] + 1
         hole_col = tip_columns[0] + 1
 
-        if self.num_channels != 8:
+        if self.channel_num == 1:
             hole_row = tipspot_index % 8 + 1
 
         step = self.api_client.UnLoad(
@@ -1582,15 +1274,9 @@ class PRCXI9300Backend(LiquidHandlerBackend):
         offsets: Optional[Coordinate] = None,
         mix_rate: Optional[float] = None,
         none_keys: List[str] = [],
-        use_channels: Optional[List[int]] = [0],
     ):
         """Mix liquid in the specified resources."""
-        if use_channels == [0]:
-            axis = "Left"
-        elif use_channels == [1]:
-            axis = "Right"
-        else:
-            raise ValueError("Invalid use channels: " + str(use_channels))
+
         plate_indexes = []
         for op in targets:
             deck = op.parent.parent.parent
@@ -1614,7 +1300,7 @@ class PRCXI9300Backend(LiquidHandlerBackend):
         PlateNo = plate_indexes[0] + 1
         hole_col = tip_columns[0] + 1
         hole_row = 1
-        if self.num_channels != 8:
+        if self.num_channels == 1:
             hole_row = tipspot_index % 8 + 1
 
         assert mix_time > 0
@@ -1671,7 +1357,7 @@ class PRCXI9300Backend(LiquidHandlerBackend):
         PlateNo = plate_indexes[0] + 1
         hole_col = tip_columns[0] + 1
         hole_row = 1
-        if self.num_channels != 8:
+        if self.num_channels == 1:
             hole_row = tipspot_index % 8 + 1
 
         step = self.api_client.Imbibing(
@@ -1729,7 +1415,7 @@ class PRCXI9300Backend(LiquidHandlerBackend):
         hole_col = tip_columns[0] + 1
 
         hole_row = 1
-        if self.num_channels != 8:
+        if self.num_channels == 1:
             hole_row = tipspot_index % 8 + 1
 
         step = self.api_client.Tapping(
@@ -1855,10 +1541,10 @@ class PRCXI9300Api:
         start = False
         while not success:
             status = self.step_state_list()
-            if status is None:
-                break
             if len(status) == 1:
                 start = True
+            if status is None:
+                break
             if len(status) == 0:
                 break
             if status[-1]["State"] == 2 and start:
@@ -1937,13 +1623,6 @@ class PRCXI9300Api:
         """GetWorkTabletMatrixById"""
         return self.call("IMatrix", "GetWorkTabletMatrixById", [matrix_id])
 
-    def update_clamp_jaw_position(self, target_matrix_id: str, plate_positions: List[Dict[str, Any]]):
-        position_params = {
-            "MatrixId": target_matrix_id,  
-            "WorkTablets": plate_positions
-        }
-        return self.call("IMatrix", "UpdateClampJawPosition", [position_params])
-
     def add_WorkTablet_Matrix(self, matrix: MatrixInfo):
         return self.call("IMatrix", "AddWorkTabletMatrix2" if self.is_9320 else "AddWorkTabletMatrix", [matrix])
 
@@ -2186,26 +1865,6 @@ class PRCXI9300Api:
             "AssistFun4": is_wait,
         }
 
-    def shaking_incubation_action(self, time: int, module_no: int, amplitude: int, is_wait: bool, temperature: int):
-        return {
-            "StepAxis": "Left",
-            "Function": "Shaking_Incubation",
-            "AssistFun1": time,
-            "AssistFun2": module_no,
-            "AssistFun3": amplitude,
-            "AssistFun4": is_wait,
-            "AssistFun5": temperature,
-        }
-    
-    def magnetic_action(self, time: int, module_no: int, height: int, is_wait: bool):
-        return {
-            "StepAxis": "Left",
-            "Function": "Magnetic",
-            "AssistFun1": time,
-            "AssistFun2": module_no,
-            "AssistFun3": height,
-            "AssistFun4": is_wait,
-        }
 
 class DefaultLayout:
 
@@ -2237,82 +1896,82 @@ class DefaultLayout:
                     {
                         "Number": 1,
                         "Code": "T1",
-                        "Material": {"uuid": "57b1e4711e9e4a32b529f3132fc5931f"},
+                        "Material": {"uuid": "57b1e4711e9e4a32b529f3132fc5931f", "materialEnum": 0},
                     },
                     {
                         "Number": 2,
                         "Code": "T2",
-                        "Material": {"uuid": "57b1e4711e9e4a32b529f3132fc5931f"},
+                        "Material": {"uuid": "57b1e4711e9e4a32b529f3132fc5931f", "materialEnum": 0},
                     },
                     {
                         "Number": 3,
                         "Code": "T3",
-                        "Material": {"uuid": "57b1e4711e9e4a32b529f3132fc5931f"},
+                        "Material": {"uuid": "57b1e4711e9e4a32b529f3132fc5931f", "materialEnum": 0},
                     },
                     {
                         "Number": 4,
                         "Code": "T4",
-                        "Material": {"uuid": "57b1e4711e9e4a32b529f3132fc5931f"},
+                        "Material": {"uuid": "57b1e4711e9e4a32b529f3132fc5931f", "materialEnum": 0},
                     },
                     {
                         "Number": 5,
                         "Code": "T5",
-                        "Material": {"uuid": "57b1e4711e9e4a32b529f3132fc5931f"},
+                        "Material": {"uuid": "57b1e4711e9e4a32b529f3132fc5931f", "materialEnum": 0},
                     },
                     {
                         "Number": 6,
                         "Code": "T6",
-                        "Material": {"uuid": "57b1e4711e9e4a32b529f3132fc5931f"},
+                        "Material": {"uuid": "57b1e4711e9e4a32b529f3132fc5931f", "materialEnum": 0},
                     },
                     {
                         "Number": 7,
                         "Code": "T7",
-                        "Material": {"uuid": "57b1e4711e9e4a32b529f3132fc5931f"},
+                        "Material": {"uuid": "57b1e4711e9e4a32b529f3132fc5931f", "materialEnum": 0},
                     },
                     {
                         "Number": 8,
                         "Code": "T8",
-                        "Material": {"uuid": "57b1e4711e9e4a32b529f3132fc5931f"},
+                        "Material": {"uuid": "57b1e4711e9e4a32b529f3132fc5931f", "materialEnum": 0},
                     },
                     {
                         "Number": 9,
                         "Code": "T9",
-                        "Material": {"uuid": "57b1e4711e9e4a32b529f3132fc5931f"},
+                        "Material": {"uuid": "57b1e4711e9e4a32b529f3132fc5931f", "materialEnum": 0},
                     },
                     {
                         "Number": 10,
                         "Code": "T10",
-                        "Material": {"uuid": "57b1e4711e9e4a32b529f3132fc5931f"},
+                        "Material": {"uuid": "57b1e4711e9e4a32b529f3132fc5931f", "materialEnum": 0},
                     },
                     {
                         "Number": 11,
                         "Code": "T11",
-                        "Material": {"uuid": "57b1e4711e9e4a32b529f3132fc5931f"},
+                        "Material": {"uuid": "57b1e4711e9e4a32b529f3132fc5931f", "materialEnum": 0},
                     },
                     {
                         "Number": 12,
                         "Code": "T12",
-                        "Material": {"uuid": "730067cf07ae43849ddf4034299030e9"},
+                        "Material": {"uuid": "730067cf07ae43849ddf4034299030e9", "materialEnum": 0},
                     },  # 这个设置成废液槽，用储液槽表示
                     {
                         "Number": 13,
                         "Code": "T13",
-                        "Material": {"uuid": "57b1e4711e9e4a32b529f3132fc5931f"},
+                        "Material": {"uuid": "57b1e4711e9e4a32b529f3132fc5931f", "materialEnum": 0},
                     },
                     {
                         "Number": 14,
                         "Code": "T14",
-                        "Material": {"uuid": "57b1e4711e9e4a32b529f3132fc5931f"},
+                        "Material": {"uuid": "57b1e4711e9e4a32b529f3132fc5931f", "materialEnum": 0},
                     },
                     {
                         "Number": 15,
                         "Code": "T15",
-                        "Material": {"uuid": "57b1e4711e9e4a32b529f3132fc5931f"},
+                        "Material": {"uuid": "57b1e4711e9e4a32b529f3132fc5931f", "materialEnum": 0},
                     },
                     {
                         "Number": 16,
                         "Code": "T16",
-                        "Material": {"uuid": "730067cf07ae43849ddf4034299030e9"},
+                        "Material": {"uuid": "730067cf07ae43849ddf4034299030e9", "materialEnum": 0},
                     },  # 这个设置成垃圾桶，用储液槽表示
                 ],
             }

unilabos/devices/liquid_handling/rviz_backend.py

@@ -59,7 +59,6 @@ class UniLiquidHandlerRvizBackend(LiquidHandlerBackend):
     self.total_height = total_height
     self.joint_config = kwargs.get("joint_config", None)
     self.lh_device_id = kwargs.get("lh_device_id", "lh_joint_publisher")
-    self.simulate_rviz = kwargs.get("simulate_rviz", False)
     if not rclpy.ok():
         rclpy.init()
     self.joint_state_publisher = None
@@ -70,7 +69,7 @@ class UniLiquidHandlerRvizBackend(LiquidHandlerBackend):
     self.joint_state_publisher = LiquidHandlerJointPublisher(
                                 joint_config=self.joint_config,
                                 lh_device_id=self.lh_device_id,
-                                simulate_rviz=self.simulate_rviz)
+                                simulate_rviz=True)
 
     # 启动ROS executor
     self.executor = rclpy.executors.MultiThreadedExecutor()

unilabos/devices/motor/ZDT_X42.py

@@ -0,0 +1,376 @@
+# -*- coding: utf-8 -*-
+"""
+ZDT X42 Closed-Loop Stepper Motor Driver
+RS485 Serial Communication via USB-Serial Converter
+
+- Baudrate: 115200
+"""
+
+import serial
+import time
+import threading
+import struct
+import logging
+from typing import Optional, Any
+
+try:
+    from unilabos.device_comms.universal_driver import UniversalDriver
+except ImportError:
+    class UniversalDriver:
+        def __init__(self, *args, **kwargs):
+            self.logger = logging.getLogger(self.__class__.__name__)
+        def execute_command_from_outer(self, command: Any): pass
+
+from serial.rs485 import RS485Settings
+
+
+class ZDTX42Driver(UniversalDriver):
+    """
+    ZDT X42 闭环步进电机驱动器
+
+    支持功能:
+    - 速度模式运行
+    - 位置模式运行 (相对/绝对)
+    - 位置读取和清零
+    - 使能/禁用控制
+
+    通信协议:
+    - 帧格式: [设备ID] [功能码] [数据...] [校验位=0x6B]
+    - 响应长度根据功能码决定
+    """
+
+    def __init__(
+        self,
+        port: str,
+        baudrate: int = 115200,
+        device_id: int = 1,
+        timeout: float = 0.5,
+        debug: bool = False
+    ):
+        """
+        初始化 ZDT X42 电机驱动
+
+        Args:
+            port: 串口设备路径
+            baudrate: 波特率 (默认 115200)
+            device_id: 设备地址 (1-255)
+            timeout: 通信超时时间(秒)
+            debug: 是否启用调试输出
+        """
+        super().__init__()
+        self.id = device_id
+        self.debug = debug
+        self.lock = threading.RLock()
+        self.status = "idle"         # 对应注册表中的 status (str)
+        self.position = 0             # 对应注册表中的 position (int)
+
+        try:
+            self.ser = serial.Serial(
+                port=port,
+                baudrate=baudrate,
+                timeout=timeout,
+                bytesize=serial.EIGHTBITS,
+                parity=serial.PARITY_NONE,
+                stopbits=serial.STOPBITS_ONE
+            )
+
+            # 启用 RS485 模式
+            try:
+                self.ser.rs485_mode = RS485Settings(
+                    rts_level_for_tx=True,
+                    rts_level_for_rx=False
+                )
+            except Exception:
+                pass  # RS485 模式是可选的
+
+            self.logger.info(
+                f"ZDT X42 Motor connected: {port} "
+                f"(Baud: {baudrate}, ID: {device_id})"
+            )
+            # 自动使能电机，确保初始状态可运动
+            self.enable(True)
+
+            # 启动背景轮询线程，确保 position 实时刷新
+            self._stop_event = threading.Event()
+            self._polling_thread = threading.Thread(
+                target=self._update_loop,
+                name=f"ZDTPolling_{port}",
+                daemon=True
+            )
+            self._polling_thread.start()
+        except Exception as e:
+            self.logger.error(f"Failed to open serial port {port}: {e}")
+            self.ser = None
+
+    def _update_loop(self):
+        """背景循环读取电机位置"""
+        while not self._stop_event.is_set():
+            try:
+                self.get_position()
+            except Exception as e:
+                if self.debug:
+                    self.logger.error(f"Polling error: {e}")
+            time.sleep(1.0) # 每1秒刷新一次位置数据
+
+    def _send(self, func_code: int, payload: list) -> bytes:
+        """
+        发送指令并接收响应
+
+        Args:
+            func_code: 功能码
+            payload: 数据负载 (list of bytes)
+
+        Returns:
+            响应数据 (bytes)
+        """
+        if not self.ser:
+            self.logger.error("Serial port not available")
+            return b""
+
+        with self.lock:
+            # 清空输入缓冲区
+            self.ser.reset_input_buffer()
+
+            # 构建消息: [ID] [功能码] [数据...] [校验位=0x6B]
+            message = bytes([self.id, func_code] + payload + [0x6B])
+
+            # 发送
+            self.ser.write(message)
+
+            # 根据功能码决定响应长度
+            # 查询类指令返回 10 字节，控制类指令返回 4 字节
+            read_len = 10 if func_code in [0x31, 0x32, 0x35, 0x24, 0x27] else 4
+            response = self.ser.read(read_len)
+
+            # 调试输出
+            if self.debug:
+                sent_hex = message.hex().upper()
+                recv_hex = response.hex().upper() if response else 'TIMEOUT'
+                print(f"[ID {self.id}] TX: {sent_hex} → RX: {recv_hex}")
+
+            return response
+
+    def enable(self, on: bool = True) -> bool:
+        """
+        使能/禁用电机
+
+        Args:
+            on: True=使能(锁轴), False=禁用(松轴)
+
+        Returns:
+            是否成功
+        """
+        state = 1 if on else 0
+        resp = self._send(0xF3, [0xAB, state, 0])
+        return len(resp) >= 4
+
+    def move_speed(
+        self,
+        speed_rpm: int,
+        direction: str = "CW",
+        acceleration: int = 10
+    ) -> bool:
+        """
+        速度模式运行
+
+        Args:
+            speed_rpm: 转速 (RPM)
+            direction: 方向 ("CW"=顺时针, "CCW"=逆时针)
+            acceleration: 加速度 (0-255)
+
+        Returns:
+            是否成功
+        """
+        dir_val = 0 if direction.upper() in ["CW", "顺时针"] else 1
+        speed_bytes = struct.pack('>H', int(speed_rpm))
+        self.status = f"moving@{speed_rpm}rpm"
+        resp = self._send(0xF6, [dir_val, speed_bytes[0], speed_bytes[1], acceleration, 0])
+        return len(resp) >= 4
+
+    def move_position(
+        self,
+        pulses: int,
+        speed_rpm: int,
+        direction: str = "CW",
+        acceleration: int = 10,
+        absolute: bool = False
+    ) -> bool:
+        """
+        位置模式运行
+
+        Args:
+            pulses: 脉冲数
+            speed_rpm: 转速 (RPM)
+            direction: 方向 ("CW"=顺时针, "CCW"=逆时针)
+            acceleration: 加速度 (0-255)
+            absolute: True=绝对位置, False=相对位置
+
+        Returns:
+            是否成功
+        """
+        dir_val = 0 if direction.upper() in ["CW", "顺时针"] else 1
+        speed_bytes = struct.pack('>H', int(speed_rpm))
+        self.status = f"moving_to_{pulses}"
+        pulse_bytes = struct.pack('>I', int(pulses))
+        abs_flag = 1 if absolute else 0
+
+        payload = [
+            dir_val,
+            speed_bytes[0], speed_bytes[1],
+            acceleration,
+            pulse_bytes[0], pulse_bytes[1], pulse_bytes[2], pulse_bytes[3],
+            abs_flag,
+            0
+        ]
+
+        resp = self._send(0xFD, payload)
+        return len(resp) >= 4
+
+    def stop(self) -> bool:
+        """
+        停止电机
+
+        Returns:
+            是否成功
+        """
+        self.status = "idle"
+        resp = self._send(0xFE, [0x98, 0])
+        return len(resp) >= 4
+
+    def rotate_quarter(self, speed_rpm: int = 60, direction: str = "CW") -> bool:
+        """
+        电机旋转 1/4 圈 (阻塞式)
+        假设电机细分为 3200 脉冲/圈，1/4 圈 = 800 脉冲
+        """
+        pulses = 800
+        success = self.move_position(pulses=pulses, speed_rpm=speed_rpm, direction=direction, absolute=False)
+
+        if success:
+            # 计算预估旋转时间并进行阻塞等待 (Time = revolutions / (RPM/60))
+            # 1/4 rev / (RPM/60) = 15.0 / RPM
+            estimated_time = 15.0 / max(1, speed_rpm)
+            time.sleep(estimated_time + 0.5)  # 额外给 0.5 秒缓冲
+            self.status = "idle"
+
+        return success
+
+    def wait_time(self, duration_s: float) -> bool:
+        """
+        等待指定时间 (秒)
+        """
+        self.logger.info(f"Waiting for {duration_s} seconds...")
+        time.sleep(duration_s)
+        return True
+
+    def set_zero(self) -> bool:
+        """
+        清零当前位置
+
+        Returns:
+            是否成功
+        """
+        resp = self._send(0x0A, [])
+        return len(resp) >= 4
+
+    def get_position(self) -> Optional[int]:
+        """
+        读取当前位置 (脉冲数)
+
+        Returns:
+            当前位置脉冲数，失败返回 None
+        """
+        resp = self._send(0x32, [])
+
+        if len(resp) >= 8:
+            # 响应格式: [ID] [Func] [符号位] [数值4字节] [校验]
+            sign = resp[2]  # 0=正, 1=负
+            value = struct.unpack('>I', resp[3:7])[0]
+            self.position = -value if sign == 1 else value
+
+            if self.debug:
+                print(f"[Position] Raw: {resp.hex().upper()}, Parsed: {self.position}")
+
+            return self.position
+
+        self.logger.warning("Failed to read position")
+        return None
+
+    def close(self):
+        """关闭串口连接并停止线程"""
+        if hasattr(self, '_stop_event'):
+            self._stop_event.set()
+
+        if self.ser and self.ser.is_open:
+            self.ser.close()
+            self.logger.info("Serial port closed")
+
+
+# ============================================================
+# 测试和调试代码
+# ============================================================
+
+def test_motor():
+    """基础功能测试"""
+    logging.basicConfig(level=logging.INFO)
+
+    print("="*60)
+    print("ZDT X42 电机驱动测试")
+    print("="*60)
+
+    driver = ZDTX42Driver(
+        port="/dev/tty.usbserial-3110",
+        baudrate=115200,
+        device_id=2,
+        debug=True
+    )
+
+    if not driver.ser:
+        print("❌ 串口打开失败")
+        return
+
+    try:
+        # 测试 1: 读取位置
+        print("\n[1] 读取当前位置")
+        pos = driver.get_position()
+        print(f"✓ 当前位置: {pos} 脉冲")
+
+        # 测试 2: 使能
+        print("\n[2] 使能电机")
+        driver.enable(True)
+        time.sleep(0.3)
+        print("✓ 电机已锁定")
+
+        # 测试 3: 相对位置运动
+        print("\n[3] 相对位置运动 (1000脉冲)")
+        driver.move_position(pulses=1000, speed_rpm=60, direction="CW")
+        time.sleep(2)
+        pos = driver.get_position()
+        print(f"✓ 新位置: {pos}")
+
+        # 测试 4: 速度运动
+        print("\n[4] 速度模式 (30RPM, 3秒)")
+        driver.move_speed(speed_rpm=30, direction="CW")
+        time.sleep(3)
+        driver.stop()
+        pos = driver.get_position()
+        print(f"✓ 停止后位置: {pos}")
+
+        # 测试 5: 禁用
+        print("\n[5] 禁用电机")
+        driver.enable(False)
+        print("✓ 电机已松开")
+
+        print("\n" + "="*60)
+        print("✅ 测试完成")
+        print("="*60)
+
+    except Exception as e:
+        print(f"\n❌ 测试失败: {e}")
+        import traceback
+        traceback.print_exc()
+    finally:
+        driver.close()
+
+
+if __name__ == "__main__":
+    test_motor()

unilabos/devices/ros_dev/liquid_handler_joint_publisher_node.py

@@ -42,7 +42,6 @@ class LiquidHandlerJointPublisher(Node):
             while self.resource_action is None:
                 self.resource_action = self.check_tf_update_actions()
                 time.sleep(1)
-                self.get_logger().info(f'Waiting for TfUpdate server: {self.resource_action}')
 
             self.resource_action_client = ActionClient(self, SendCmd, self.resource_action)
             while not self.resource_action_client.wait_for_server(timeout_sec=1.0):

unilabos/devices/separator/chinwe.py

@@ -623,6 +623,119 @@ class ChinweDevice(UniversalDriver):
         time.sleep(duration)
         return True
 
+    def separation_step(self, motor_id: int = 5, speed: int = 60, pulses: int = 700,
+                       max_cycles: int = 0, timeout: int = 300) -> bool:
+        """
+        分液步骤 - 液位传感器与电机联动
+        当液位传感器检测到"有液"时,电机顺时针旋转指定脉冲数
+        当液位传感器检测到"无液"时,电机逆时针旋转指定脉冲数
+
+        :param motor_id: 电机ID (必须在初始化时配置的motor_ids中)
+        :param speed: 电机转速 (RPM)
+        :param pulses: 每次旋转的脉冲数 (默认700约为1/4圈,假设3200脉冲/圈)
+        :param max_cycles: 最大执行循环次数 (0=无限制,默认0)
+        :param timeout: 整体超时时间 (秒)
+        :return: 成功返回True,超时或失败返回False
+        """
+        motor_id = int(motor_id)
+        speed = int(speed)
+        pulses = int(pulses)
+        max_cycles = int(max_cycles)
+        timeout = int(timeout)
+
+        # 检查电机是否存在
+        if motor_id not in self.motors:
+            self.logger.error(f"Motor {motor_id} not found in configured motors: {list(self.motors.keys())}")
+            return False
+
+        # 检查传感器是否可用
+        if not self.sensor:
+            self.logger.error("Sensor not initialized")
+            return False
+
+        motor = self.motors[motor_id]
+
+        # 停止轮询线程，避免与 separation_step 同时读取传感器造成串口冲突
+        self.logger.info("Stopping polling thread for separation_step...")
+        self._stop_event.set()
+        if self._poll_thread and self._poll_thread.is_alive():
+            self._poll_thread.join(timeout=2.0)
+
+        # 使能电机
+        self.logger.info(f"Enabling motor {motor_id}...")
+        motor.enable(True)
+        time.sleep(0.2)
+
+        self.logger.info(f"Starting separation step: motor_id={motor_id}, speed={speed} RPM, "
+                        f"pulses={pulses}, max_cycles={max_cycles}, timeout={timeout}s")
+
+        # 记录上一次的液位状态
+        last_level = None
+        cycle_count = 0
+        start_time = time.time()
+        error_count = 0
+
+        try:
+            while True:
+                # 检查超时
+                if time.time() - start_time > timeout:
+                    self.logger.warning(f"Separation step timeout after {timeout} seconds")
+                    return False
+
+                # 检查循环次数限制
+                if max_cycles > 0 and cycle_count >= max_cycles:
+                    self.logger.info(f"Separation step completed: reached max_cycles={max_cycles}")
+                    return True
+
+                # 读取传感器数据
+                data = self.sensor.read_level()
+
+                if data is None:
+                    error_count += 1
+                    if error_count > 5:
+                        self.logger.warning("Sensor read failed multiple times, retrying...")
+                        error_count = 0
+                    time.sleep(0.5)
+                    continue
+
+                error_count = 0
+                current_level = data['level']
+                rssi = data['rssi']
+
+                # 检测状态变化 (包括首次检测)
+                if current_level != last_level:
+                    cycle_count += 1
+
+                    if current_level:
+                        # 有液 -> 电机顺时针旋转
+                        self.logger.info(f"[Cycle {cycle_count}] Liquid detected (RSSI={rssi}), "
+                                       f"rotating motor {motor_id} clockwise {pulses} pulses")
+                        motor.run_position(pulses=pulses, speed_rpm=speed, direction=0, absolute=False)
+
+                        # 等待电机完成 (预估时间)
+                        estimated_time = 15.0 / max(1, speed)
+                        time.sleep(estimated_time + 0.5)
+
+                    else:
+                        # 无液 -> 电机逆时针旋转
+                        self.logger.info(f"[Cycle {cycle_count}] No liquid detected (RSSI={rssi}), "
+                                       f"rotating motor {motor_id} counter-clockwise {pulses} pulses")
+                        motor.run_position(pulses=pulses, speed_rpm=speed, direction=1, absolute=False)
+
+                        # 等待电机完成 (预估时间)
+                        estimated_time = 15.0 / max(1, speed)
+                        time.sleep(estimated_time + 0.5)
+
+                # 更新状态
+                last_level = current_level
+
+                # 轮询间隔
+                time.sleep(0.1)
+        finally:
+            # 恢复轮询线程
+            self.logger.info("Restarting polling thread...")
+            self._start_polling()
+
     def execute_command_from_outer(self, command_dict: Dict[str, Any]) -> bool:
         """支持标准 JSON 指令调用"""
         return super().execute_command_from_outer(command_dict)

unilabos/devices/separator/xkc_sensor.py

@@ -0,0 +1,379 @@
+# -*- coding: utf-8 -*-
+"""
+XKC RS485 液位传感器 (Modbus RTU)
+
+说明:
+    1. 遵循 Modbus-RTU 协议。
+    2. 数据寄存器: 0x0001 (液位状态, 1=有液, 0=无液), 0x0002 (RSSI 信号强度)。
+    3. 地址寄存器: 0x0004 (可读写, 范围 1-254)。
+    4. 波特率寄存器: 0x0005 (可写, 代码表见 change_baudrate 方法)。
+"""
+
+import struct
+import threading
+import time
+import logging
+import serial
+from typing import Optional, Dict, Any, List
+
+from unilabos.device_comms.universal_driver import UniversalDriver
+
+class TransportManager:
+    """
+    统一通信管理类。
+    仅支持 串口 (Serial/有线) 连接。
+    """
+    def __init__(self, port: str, baudrate: int = 9600, timeout: float = 3.0, logger=None):
+        self.port = port
+        self.baudrate = baudrate
+        self.timeout = timeout
+        self.logger = logger
+        self.lock = threading.RLock() # 线程锁，确保多设备共用一个连接时不冲突
+
+        self.serial = None
+        self._connect_serial()
+
+    def _connect_serial(self):
+        try:
+            self.serial = serial.Serial(
+                port=self.port,
+                baudrate=self.baudrate,
+                timeout=self.timeout
+            )
+        except Exception as e:
+            raise ConnectionError(f"Serial open failed: {e}")
+
+    def close(self):
+        """关闭连接"""
+        if self.serial and self.serial.is_open:
+            self.serial.close()
+
+    def clear_buffer(self):
+        """清空缓冲区 (Thread-safe)"""
+        with self.lock:
+            if self.serial:
+                self.serial.reset_input_buffer()
+
+    def write(self, data: bytes):
+        """发送原始字节"""
+        with self.lock:
+            if self.serial:
+                self.serial.write(data)
+
+    def read(self, size: int) -> bytes:
+        """读取指定长度字节"""
+        if self.serial:
+            return self.serial.read(size)
+        return b''
+
+class XKCSensorDriver(UniversalDriver):
+    """XKC RS485 液位传感器 (Modbus RTU)"""
+
+    def __init__(self, port: str, baudrate: int = 9600, device_id: int = 6,
+                 threshold: int = 300, timeout: float = 3.0, debug: bool = False):
+        super().__init__()
+        self.port = port
+        self.baudrate = baudrate
+        self.device_id = device_id
+        self.threshold = threshold
+        self.timeout = timeout
+        self.debug = debug
+        self.level = False
+        self.rssi = 0
+        self.status = {"level": self.level, "rssi": self.rssi}
+
+        try:
+            self.transport = TransportManager(port, baudrate, timeout, logger=self.logger)
+            self.logger.info(f"XKCSensorDriver connected to {port} (ID: {device_id})")
+        except Exception as e:
+            self.logger.error(f"Failed to connect XKCSensorDriver: {e}")
+            self.transport = None
+
+        # 启动背景轮询线程，确保 status 实时刷新
+        self._stop_event = threading.Event()
+        self._polling_thread = threading.Thread(
+            target=self._update_loop,
+            name=f"XKCPolling_{port}",
+            daemon=True
+        )
+        if self.transport:
+            self._polling_thread.start()
+
+    def _update_loop(self):
+        """背景循环读取传感器数据"""
+        while not self._stop_event.is_set():
+            try:
+                self.read_level()
+            except Exception as e:
+                if self.debug:
+                    self.logger.error(f"Polling error: {e}")
+            time.sleep(2.0) # 每2秒刷新一次数据
+
+    def _crc(self, data: bytes) -> bytes:
+        crc = 0xFFFF
+        for byte in data:
+            crc ^= byte
+            for _ in range(8):
+                if crc & 0x0001: crc = (crc >> 1) ^ 0xA001
+                else: crc >>= 1
+        return struct.pack('<H', crc)
+
+    def read_level(self) -> Optional[Dict[str, Any]]:
+        """
+        读取液位。
+        返回: {'level': bool, 'rssi': int}
+        """
+        if not self.transport:
+            return None
+
+        with self.transport.lock:
+            self.transport.clear_buffer()
+            # Modbus Read Registers: 01 03 00 01 00 02 CRC
+            payload = struct.pack('>HH', 0x0001, 0x0002)
+            msg = struct.pack('BB', self.device_id, 0x03) + payload
+            msg += self._crc(msg)
+
+            if self.debug:
+                self.logger.info(f"TX (ID {self.device_id}): {msg.hex().upper()}")
+
+            self.transport.write(msg)
+
+            # Read header
+            h = self.transport.read(3) # Addr, Func, Len
+            if self.debug:
+                self.logger.info(f"RX Header: {h.hex().upper()}")
+
+            if len(h) < 3: return None
+            length = h[2]
+
+            # Read body + CRC
+            body = self.transport.read(length + 2)
+            if self.debug:
+                self.logger.info(f"RX Body+CRC: {body.hex().upper()}")
+            if len(body) < length + 2:
+                # Firmware bug fix specific to some modules
+                if len(body) == 4 and length == 4:
+                    pass
+                else:
+                    return None
+
+            data = body[:-2]
+            # 根据手册说明:
+            # 寄存器 0x0001 (data[0:2]): 液位状态 (00 01 为有液, 00 00 为无液)
+            # 寄存器 0x0002 (data[2:4]): 信号强度 RSSI
+
+            hw_level = False
+            rssi = 0
+
+            if len(data) >= 4:
+                hw_level = ((data[0] << 8) | data[1]) == 1
+                rssi = (data[2] << 8) | data[3]
+            elif len(data) == 2:
+                # 兼容模式: 某些老固件可能只返回 1 个寄存器
+                rssi = (data[0] << 8) | data[1]
+                hw_level = rssi > self.threshold
+            else:
+                return None
+
+            # 最终判定: 优先使用硬件层级的 level 判定，但 RSSI 阈值逻辑作为补充/校验
+            # 注意: 如果用户显式设置了 THRESHOLD，我们可以在逻辑中做权衡
+            self.level = hw_level or (rssi > self.threshold)
+            self.rssi = rssi
+            result = {
+                'level': self.level,
+                'rssi': self.rssi
+            }
+            self.status = result
+            return result
+
+    def wait_level(self, target_state: bool, timeout: float = 60.0) -> bool:
+        """
+        等待液位达到目标状态 (阻塞式)
+        """
+        self.logger.info(f"Waiting for level: {target_state}")
+        start_time = time.time()
+        while (time.time() - start_time) < timeout:
+            res = self.read_level()
+            if res and res.get('level') == target_state:
+                return True
+            time.sleep(0.5)
+        self.logger.warning(f"Wait level timeout ({timeout}s)")
+        return False
+
+    def wait_for_liquid(self, target_state: bool, timeout: float = 120.0) -> bool:
+        """
+        实时检测电导率(RSSI)并等待用户指定的“有液”或“无液”状态。
+        一旦检测到符合目标状态，立即返回。
+
+        Args:
+            target_state: True 为“有液”, False 为“无液”
+            timeout: 最大等待时间(秒)
+        """
+        state_str = "有液" if target_state else "无液"
+        self.logger.info(f"开始实时检测电导率，等待状态: {state_str} (超时: {timeout}s)")
+
+        start_time = time.time()
+        while (time.time() - start_time) < timeout:
+            res = self.read_level() # 内部已更新 self.level 和 self.rssi
+            if res:
+                current_level = res.get('level')
+                current_rssi = res.get('rssi')
+                if current_level == target_state:
+                    self.logger.info(f"✅ 检测到目标状态: {state_str} (当前电导率/RSSI: {current_rssi})")
+                    return True
+
+                if self.debug:
+                    self.logger.debug(f"当前状态: {'有液' if current_level else '无液'}, RSSI: {current_rssi}")
+
+            time.sleep(0.2) # 高频采样
+
+        self.logger.warning(f"❌ 等待 {state_str} 状态超时 ({timeout}s)")
+        return False
+
+    def set_threshold(self, threshold: int):
+        """设置液位判定阈值"""
+        self.threshold = int(threshold)
+        self.logger.info(f"Threshold updated to: {self.threshold}")
+
+    def change_device_id(self, new_id: int) -> bool:
+        """
+        修改设备的 Modbus 从站地址。
+        寄存器: 0x0004, 功能码: 0x06
+        """
+        if not (1 <= new_id <= 254):
+            self.logger.error(f"Invalid device ID: {new_id}. Must be 1-254.")
+            return False
+
+        self.logger.info(f"Changing device ID from {self.device_id} to {new_id}")
+        success = self._write_single_register(0x0004, new_id)
+        if success:
+            self.device_id = new_id # 更新内存中的地址
+            self.logger.info(f"Device ID update command sent successfully (target {new_id}).")
+        return success
+
+    def change_baudrate(self, baud_code: int) -> bool:
+        """
+        更改通讯波特率 (寄存器: 0x0005)。
+        设置成功后传感器 LED 会闪烁，通常无数据返回。
+
+        波特率代码对照表 (16进制):
+        05: 2400
+        06: 4800
+        07: 9600 (默认)
+        08: 14400
+        09: 19200
+        0A: 28800
+        0C: 57600
+        0D: 115200
+        0E: 128000
+        0F: 256000
+        """
+        self.logger.info(f"Sending baudrate change command (Code: {baud_code:02X})")
+        # 写入寄存器 0x0005
+        self._write_single_register(0x0005, baud_code)
+        self.logger.info("Baudrate change command executed. Device LED should flash. Please update connection settings.")
+        return True
+
+    def factory_reset(self) -> bool:
+        """
+        恢复出厂设置 (通过广播地址 FF)。
+        设置地址为 01，逻辑为向 0x0004 写入 0x0002
+        """
+        self.logger.info("Sending factory reset command via broadcast address FF...")
+        # 广播指令通常无回显
+        self._write_single_register(0x0004, 0x0002, slave_id=0xFF)
+        self.logger.info("Factory reset command sent. Device address should be 01 now.")
+        return True
+
+    def _write_single_register(self, reg_addr: int, value: int, slave_id: Optional[int] = None) -> bool:
+        """内部辅助函数: Modbus 功能码 06 写单个寄存器"""
+        if not self.transport: return False
+
+        target_id = slave_id if slave_id is not None else self.device_id
+        msg = struct.pack('BBHH', target_id, 0x06, reg_addr, value)
+        msg += self._crc(msg)
+
+        with self.transport.lock:
+            self.transport.clear_buffer()
+            if self.debug:
+                self.logger.info(f"TX Write (Reg {reg_addr:#06x}): {msg.hex().upper()}")
+
+            self.transport.write(msg)
+
+            # 广播地址、波特率修改或厂家特定指令可能无回显
+            if target_id == 0xFF or reg_addr == 0x0005:
+                time.sleep(0.5)
+                return True
+
+            # 等待返回 (正常应返回相同报文)
+            resp = self.transport.read(len(msg))
+            if self.debug:
+                self.logger.info(f"RX Write Response: {resp.hex().upper()}")
+
+            return resp == msg
+
+    def close(self):
+        if self.transport:
+            self.transport.close()
+
+if __name__ == "__main__":
+    # 快速实例化测试
+    import logging
+    # 减少冗余日志，仅显示重要信息
+    logging.basicConfig(level=logging.INFO, format='%(levelname)s: %(message)s')
+
+    # 硬件配置 (根据实际情况修改)
+    TEST_PORT = "/dev/tty.usbserial-3110"
+    SLAVE_ID = 1
+    THRESHOLD = 300
+
+    print("\n" + "="*50)
+    print(f"  XKC RS485 传感器独立测试程序")
+    print(f"  端口: {TEST_PORT} | 地址: {SLAVE_ID} | 阈值: {THRESHOLD}")
+    print("="*50)
+
+    sensor = XKCSensorDriver(port=TEST_PORT, device_id=SLAVE_ID, threshold=THRESHOLD, debug=False)
+
+    try:
+        if sensor.transport:
+            print(f"\n开始实时连续采样测试 (持续 15 秒)...")
+            print(f"按 Ctrl+C 可提前停止\n")
+
+            start_time = time.time()
+            duration = 15
+            count = 0
+
+            while time.time() - start_time < duration:
+                count += 1
+                res = sensor.read_level()
+                if res:
+                    rssi = res['rssi']
+                    level = res['level']
+                    status_str = "【有液】" if level else "【无液】"
+                    # 使用 \r 实现单行刷新显示 (或者不刷，直接打印历史)
+                    # 为了方便查看变化，我们直接打印
+                    elapsed = time.time() - start_time
+                    print(f" [{elapsed:4.1f}s] 采样 {count:<3}: 电导率/RSSI = {rssi:<5} | 判定结果: {status_str}")
+                else:
+                    print(f" [{time.time()-start_time:4.1f}s] 采样 {count:<3}: 通信失败 (无响应)")
+
+                time.sleep(0.5) # 每秒采样 2 次
+
+            print(f"\n--- 15 秒采样测试完成 (总计 {count} 次) ---")
+
+            # [3] 测试动态修改阈值
+            print(f"\n[3] 动态修改阈值演示...")
+            new_threshold = 400
+            sensor.set_threshold(new_threshold)
+            res = sensor.read_level()
+            if res:
+                print(f"  采样 (当前阈值={new_threshold}): 电导率/RSSI = {res['rssi']:<5} | 判定结果: {'【有液】' if res['level'] else '【无液】'}")
+            sensor.set_threshold(THRESHOLD) # 还原
+
+    except KeyboardInterrupt:
+        print("\n[!] 用户中断测试")
+    except Exception as e:
+        print(f"\n[!] 测试运行出错: {e}")
+    finally:
+        sensor.close()
+        print("\n--- 测试程序已退出 ---\n")

unilabos/devices/virtual/virtual_multiway_valve.py

@@ -2,6 +2,8 @@ import time
 import logging
 from typing import Union, Dict, Optional
 
+from unilabos.registry.decorators import topic_config
+
 
 class VirtualMultiwayValve:
     """
@@ -41,13 +43,11 @@ class VirtualMultiwayValve:
     def target_position(self) -> int:
         return self._target_position
 
-    def get_current_position(self) -> int:
-        """获取当前阀门位置 📍"""
-        return self._current_position
-
-    def get_current_port(self) -> str:
-        """获取当前连接的端口名称 🔌"""
-        return self._current_position
+    @property
+    @topic_config()
+    def current_port(self) -> str:
+        """当前连接的端口名称 🔌"""
+        return self.port
 
     def set_position(self, command: Union[int, str]):
         """
@@ -169,12 +169,14 @@ class VirtualMultiwayValve:
         self._status = "Idle"
         self._valve_state = "Closed"
         
-        close_msg = f"🔒 阀门已关闭，保持在位置 {self._current_position} ({self.get_current_port()})"
+        close_msg = f"🔒 阀门已关闭，保持在位置 {self._current_position} ({self.port})"
         self.logger.info(close_msg)
         return close_msg
 
-    def get_valve_position(self) -> int:
-        """获取阀门位置 - 兼容性方法 📍"""
+    @property
+    @topic_config()
+    def valve_position(self) -> int:
+        """阀门位置 📍"""
         return self._current_position
 
     def set_valve_position(self, command: Union[int, str]):
@@ -229,19 +231,16 @@ class VirtualMultiwayValve:
             self.logger.info(f"🔄 从端口 {self._current_position} 切换到泵位置...")
             return self.set_to_pump_position()
 
-    def get_flow_path(self) -> str:
-        """获取当前流路路径描述 🌊"""
-        current_port = self.get_current_port()
+    @property
+    @topic_config()
+    def flow_path(self) -> str:
+        """当前流路路径描述 🌊"""
         if self._current_position == 0:
-            flow_path = f"🚰 转移泵已连接 (位置 {self._current_position})"
-        else:
-            flow_path = f"🔌 端口 {self._current_position} 已连接 ({current_port})"
-        
-        # 删除debug日志：self.logger.debug(f"🌊 当前流路: {flow_path}")
-        return flow_path
+            return f"🚰 转移泵已连接 (位置 {self._current_position})"
+        return f"🔌 端口 {self._current_position} 已连接 ({self.current_port})"
 
     def __str__(self):
-        current_port = self.get_current_port()
+        current_port = self.current_port
         status_emoji = "✅" if self._status == "Idle" else "🔄" if self._status == "Busy" else "❌"
         
         return f"🔄 VirtualMultiwayValve({status_emoji} 位置: {self._current_position}/{self.max_positions}, 端口: {current_port}, 状态: {self._status})"
@@ -253,7 +252,7 @@ if __name__ == "__main__":
     
     print("🔄 === 虚拟九通阀门测试 === ✨")
     print(f"🏠 初始状态: {valve}")
-    print(f"🌊 当前流路: {valve.get_flow_path()}")
+    print(f"🌊 当前流路: {valve.flow_path}")
     
     # 切换到试剂瓶1（1号位）
     print(f"\n🔌 切换到1号位: {valve.set_position(1)}")

unilabos/devices/virtual/virtual_sample_demo.py

@@ -0,0 +1,88 @@
+"""虚拟样品演示设备 — 用于前端 sample tracking 功能的极简 demo"""
+
+import asyncio
+import logging
+import random
+import time
+from typing import Any, Dict, List, Optional
+
+
+class VirtualSampleDemo:
+    """虚拟样品追踪演示设备，提供两种典型返回模式：
+    - measure_samples: 等长输入输出 (前端按 index 自动对齐)
+    - split_and_measure: 输出比输入长，附带 samples 列标注归属
+    """
+
+    def __init__(self, device_id: Optional[str] = None, config: Optional[Dict[str, Any]] = None, **kwargs):
+        if device_id is None and "id" in kwargs:
+            device_id = kwargs.pop("id")
+        if config is None and "config" in kwargs:
+            config = kwargs.pop("config")
+
+        self.device_id = device_id or "unknown_sample_demo"
+        self.config = config or {}
+        self.logger = logging.getLogger(f"VirtualSampleDemo.{self.device_id}")
+        self.data: Dict[str, Any] = {"status": "Idle"}
+
+    # ------------------------------------------------------------------
+    # Action 1: 等长输入输出，无 samples 列
+    # ------------------------------------------------------------------
+    async def measure_samples(self, concentrations: List[float]) -> Dict[str, Any]:
+        """模拟光度测量。absorbance = concentration * 0.05 + noise
+
+        入参和出参 list 长度相等，前端按 index 自动对齐。
+        """
+        self.logger.info(f"measure_samples: concentrations={concentrations}")
+        absorbance = [round(c * 0.05 + random.gauss(0, 0.005), 4) for c in concentrations]
+        return {"concentrations": concentrations, "absorbance": absorbance}
+
+    # ------------------------------------------------------------------
+    # Action 2: 输出比输入长，带 samples 列
+    # ------------------------------------------------------------------
+    async def split_and_measure(self, volumes: List[float], split_count: int = 3) -> Dict[str, Any]:
+        """将每个样品均分为 split_count 份后逐份测量。
+
+        返回的 list 长度 = len(volumes) * split_count，
+        附带 samples 列标注每行属于第几个输入样品 (0-based index)。
+        """
+        self.logger.info(f"split_and_measure: volumes={volumes}, split_count={split_count}")
+        out_volumes: List[float] = []
+        readings: List[float] = []
+        samples: List[int] = []
+
+        for idx, vol in enumerate(volumes):
+            split_vol = round(vol / split_count, 2)
+            for _ in range(split_count):
+                out_volumes.append(split_vol)
+                readings.append(round(random.uniform(0.1, 1.0), 4))
+                samples.append(idx)
+
+        return {"volumes": out_volumes, "readings": readings, "unilabos_samples": samples}
+
+    # ------------------------------------------------------------------
+    # Action 3: 入参和出参都带 samples 列（不等长）
+    # ------------------------------------------------------------------
+    async def analyze_readings(self, readings: List[float], samples: List[int]) -> Dict[str, Any]:
+        """对 split_and_measure 的输出做二次分析。
+
+        入参 readings/samples 长度相同但 > 原始样品数，
+        出参同样带 samples 列，长度与入参一致。
+        """
+        self.logger.info(f"analyze_readings: readings={readings}, samples={samples}")
+        scores: List[float] = []
+        passed: List[bool] = []
+        threshold = 0.4
+
+        for r in readings:
+            score = round(r * 100 + random.gauss(0, 2), 2)
+            scores.append(score)
+            passed.append(r >= threshold)
+
+        return {"scores": scores, "passed": passed, "unilabos_samples": samples}
+
+    # ------------------------------------------------------------------
+    # 状态属性
+    # ------------------------------------------------------------------
+    @property
+    def status(self) -> str:
+        return self.data.get("status", "Idle")

unilabos/devices/virtual/virtual_stirrer.py

@@ -3,6 +3,7 @@ import logging
 import time as time_module
 from typing import Dict, Any
 
+from unilabos.registry.decorators import topic_config
 from unilabos.ros.nodes.base_device_node import BaseROS2DeviceNode
 
 class VirtualStirrer:
@@ -314,9 +315,11 @@ class VirtualStirrer:
     def min_speed(self) -> float:
         return self._min_speed
     
-    def get_device_info(self) -> Dict[str, Any]:
-        """获取设备状态信息 📊"""
-        info = {
+    @property
+    @topic_config()
+    def device_info(self) -> Dict[str, Any]:
+        """设备状态快照信息 📊"""
+        return {
             "device_id": self.device_id,
             "status": self.status,
             "operation_mode": self.operation_mode,
@@ -325,12 +328,9 @@ class VirtualStirrer:
             "is_stirring": self.is_stirring,
             "remaining_time": self.remaining_time,
             "max_speed": self._max_speed,
-            "min_speed": self._min_speed
+            "min_speed": self._min_speed,
         }
-        
-        # self.logger.debug(f"📊 设备信息: 模式={self.operation_mode}, 速度={self.current_speed} RPM, 搅拌={self.is_stirring}")
-        return info
-    
+
     def __str__(self):
         status_emoji = "✅" if self.operation_mode == "Idle" else "🌪️" if self.operation_mode == "Stirring" else "🛑" if self.operation_mode == "Settling" else "❌"
         return f"🌪️ VirtualStirrer({status_emoji} {self.device_id}: {self.operation_mode}, {self.current_speed} RPM)"

unilabos/devices/virtual/virtual_transferpump.py

@@ -4,6 +4,7 @@ from enum import Enum
 from typing import Union, Optional
 import logging
 
+from unilabos.registry.decorators import topic_config
 from unilabos.ros.nodes.base_device_node import BaseROS2DeviceNode
 
 
@@ -385,8 +386,10 @@ class VirtualTransferPump:
         """获取当前体积"""
         return self._current_volume
 
-    def get_remaining_capacity(self) -> float:
-        """获取剩余容量"""
+    @property
+    @topic_config()
+    def remaining_capacity(self) -> float:
+        """剩余容量 (ml)"""
         return self.max_volume - self._current_volume
 
     def is_empty(self) -> bool:

unilabos/devices/virtual/workbench.py

@@ -1,15 +1,15 @@
 """
 Virtual Workbench Device - 模拟工作台设备
-包含：
+包含:
 - 1个机械臂 (每次操作3s, 独占锁)
 - 3个加热台 (每次加热10s, 可并行)
 
-工作流程：
-1. A1-A5 物料同时启动，竞争机械臂
+工作流程:
+1. A1-A5 物料同时启动, 竞争机械臂
 2. 机械臂将物料移动到空闲加热台
-3. 加热完成后，机械臂将物料移动到C1-C5
+3. 加热完成后, 机械臂将物料移动到C1-C5
 
-注意：调用来自线程池，使用 threading.Lock 进行同步
+注意: 调用来自线程池, 使用 threading.Lock 进行同步
 """
 
 import logging
@@ -21,9 +21,12 @@ from threading import Lock, RLock
 
 from typing_extensions import TypedDict
 
-from unilabos.ros.nodes.base_device_node import BaseROS2DeviceNode
-from unilabos.utils.decorator import not_action, always_free
-from unilabos.resources.resource_tracker import SampleUUIDsType, LabSample, RETURN_UNILABOS_SAMPLES
+from unilabos.registry.decorators import (
+    device, action, ActionInputHandle, ActionOutputHandle, DataSource, topic_config, not_action, NodeType
+)
+from unilabos.registry.placeholder_type import ResourceSlot, DeviceSlot
+from unilabos.ros.nodes.base_device_node import BaseROS2DeviceNode, ROS2DeviceNode
+from unilabos.resources.resource_tracker import SampleUUIDsType, LabSample, ResourceTreeSet
 
 
 # ============ TypedDict 返回类型定义 ============
@@ -57,6 +60,8 @@ class MoveToOutputResult(TypedDict):
     success: bool
     station_id: int
     material_id: str
+    output_position: str
+    message: str
     unilabos_samples: List[LabSample]
 
 
@@ -81,9 +86,9 @@ class HeatingStationState(Enum):
     """加热台状态枚举"""
 
     IDLE = "idle"  # 空闲
-    OCCUPIED = "occupied"  # 已放置物料，等待加热
+    OCCUPIED = "occupied"  # 已放置物料, 等待加热
     HEATING = "heating"  # 加热中
-    COMPLETED = "completed"  # 加热完成，等待取走
+    COMPLETED = "completed"  # 加热完成, 等待取走
 
 
 class ArmState(Enum):
@@ -105,19 +110,24 @@ class HeatingStation:
     heating_progress: float = 0.0
 
 
+@device(
+    id="virtual_workbench",
+    category=["virtual_device"],
+    description="Virtual Workbench with 1 robotic arm and 3 heating stations for concurrent material processing",
+)
 class VirtualWorkbench:
     """
     Virtual Workbench Device - 虚拟工作台设备
 
     模拟一个包含1个机械臂和3个加热台的工作站
-    - 机械臂操作耗时3秒，同一时间只能执行一个操作
-    - 加热台加热耗时10秒，3个加热台可并行工作
+    - 机械臂操作耗时3秒, 同一时间只能执行一个操作
+    - 加热台加热耗时10秒, 3个加热台可并行工作
 
     工作流:
-    1. 物料A1-A5并发启动（线程池），竞争机械臂使用权
-    2. 获取机械臂后，查找空闲加热台
-    3. 机械臂将物料放入加热台，开始加热
-    4. 加热完成后，机械臂将物料移动到目标位置Cn
+    1. 物料A1-A5并发启动(线程池), 竞争机械臂使用权
+    2. 获取机械臂后, 查找空闲加热台
+    3. 机械臂将物料放入加热台, 开始加热
+    4. 加热完成后, 机械臂将物料移动到目标位置Cn
     """
 
     _ros_node: BaseROS2DeviceNode
@@ -145,19 +155,19 @@ class VirtualWorkbench:
         self.HEATING_TIME = float(self.config.get("heating_time", self.HEATING_TIME))
         self.NUM_HEATING_STATIONS = int(self.config.get("num_heating_stations", self.NUM_HEATING_STATIONS))
 
-        # 机械臂状态和锁 (使用threading.Lock)
+        # 机械臂状态和锁
         self._arm_lock = Lock()
         self._arm_state = ArmState.IDLE
         self._arm_current_task: Optional[str] = None
 
-        # 加热台状态 (station_id -> HeatingStation) - 立即初始化，不依赖initialize()
+        # 加热台状态
         self._heating_stations: Dict[int, HeatingStation] = {
             i: HeatingStation(station_id=i) for i in range(1, self.NUM_HEATING_STATIONS + 1)
         }
-        self._stations_lock = RLock()  # 可重入锁，保护加热台状态
+        self._stations_lock = RLock()
 
         # 任务追踪
-        self._active_tasks: Dict[str, Dict[str, Any]] = {}  # material_id -> task_info
+        self._active_tasks: Dict[str, Dict[str, Any]] = {}
         self._tasks_lock = Lock()
 
         # 处理其他kwargs参数
@@ -183,7 +193,6 @@ class VirtualWorkbench:
         """初始化虚拟工作台"""
         self.logger.info(f"初始化虚拟工作台 {self.device_id}")
 
-        # 重置加热台状态 (已在__init__中创建，这里重置为初始状态)
         with self._stations_lock:
             for station in self._heating_stations.values():
                 station.state = HeatingStationState.IDLE
@@ -191,7 +200,6 @@ class VirtualWorkbench:
                 station.material_number = None
                 station.heating_progress = 0.0
 
-        # 初始化状态
         self.data.update(
             {
                 "status": "Ready",
@@ -257,11 +265,7 @@ class VirtualWorkbench:
             self.data["message"] = message
 
     def _find_available_heating_station(self) -> Optional[int]:
-        """查找空闲的加热台
-
-        Returns:
-            空闲加热台ID，如果没有则返回None
-        """
+        """查找空闲的加热台"""
         with self._stations_lock:
             for station_id, station in self._heating_stations.items():
                 if station.state == HeatingStationState.IDLE:
@@ -269,23 +273,12 @@ class VirtualWorkbench:
         return None
 
     def _acquire_arm(self, task_description: str) -> bool:
-        """获取机械臂使用权（阻塞直到获取）
-
-        Args:
-            task_description: 任务描述，用于日志
-
-        Returns:
-            是否成功获取
-        """
+        """获取机械臂使用权(阻塞直到获取)"""
         self.logger.info(f"[{task_description}] 等待获取机械臂...")
-
-        # 阻塞等待获取锁
         self._arm_lock.acquire()
-
         self._arm_state = ArmState.BUSY
         self._arm_current_task = task_description
         self._update_data_status(f"机械臂执行: {task_description}")
-
         self.logger.info(f"[{task_description}] 成功获取机械臂使用权")
         return True
 
@@ -298,6 +291,142 @@ class VirtualWorkbench:
         self._update_data_status(f"机械臂已释放 (完成: {task})")
         self.logger.info(f"机械臂已释放 (完成: {task})")
 
+    @action(
+        always_free=True, node_type=NodeType.MANUAL_CONFIRM, placeholder_keys={
+            "assignee_user_ids": "unilabos_manual_confirm"
+        }, goal_default={
+            "timeout_seconds": 3600,
+            "assignee_user_ids": []
+        }, feedback_interval=300,
+        handles=[
+            ActionInputHandle(key="target_device", data_type="device_id",
+                              label="目标设备", data_key="target_device", data_source=DataSource.HANDLE),
+            ActionInputHandle(key="resource", data_type="resource",
+                              label="待转移资源", data_key="resource", data_source=DataSource.HANDLE),
+            ActionInputHandle(key="mount_resource", data_type="resource",
+                              label="目标孔位", data_key="mount_resource", data_source=DataSource.HANDLE),
+
+            ActionInputHandle(key="collector_mass", data_type="collector_mass",
+                              label="极流体质量", data_key="collector_mass", data_source=DataSource.HANDLE),
+            ActionInputHandle(key="active_material", data_type="active_material",
+                              label="活性物质含量", data_key="active_material", data_source=DataSource.HANDLE),
+            ActionInputHandle(key="capacity", data_type="capacity",
+                              label="克容量", data_key="capacity", data_source=DataSource.HANDLE),
+            ActionInputHandle(key="battery_system", data_type="battery_system",
+                              label="电池体系", data_key="battery_system", data_source=DataSource.HANDLE),
+            # transfer使用
+            ActionOutputHandle(key="target_device", data_type="device_id",
+                               label="目标设备", data_key="target_device", data_source=DataSource.EXECUTOR),
+            ActionOutputHandle(key="resource", data_type="resource",
+                              label="待转移资源", data_key="resource.@flatten", data_source=DataSource.EXECUTOR),
+            ActionOutputHandle(key="mount_resource", data_type="resource",
+                              label="目标孔位", data_key="mount_resource.@flatten", data_source=DataSource.EXECUTOR),
+            # test使用
+            ActionOutputHandle(key="collector_mass", data_type="collector_mass",
+                              label="极流体质量", data_key="collector_mass", data_source=DataSource.EXECUTOR),
+            ActionOutputHandle(key="active_material", data_type="active_material",
+                              label="活性物质含量", data_key="active_material", data_source=DataSource.EXECUTOR),
+            ActionOutputHandle(key="capacity", data_type="capacity",
+                              label="克容量", data_key="capacity", data_source=DataSource.EXECUTOR),
+            ActionOutputHandle(key="battery_system", data_type="battery_system",
+                              label="电池体系", data_key="battery_system", data_source=DataSource.EXECUTOR),
+        ]
+    )
+    def manual_confirm(
+        self,
+        resource: List[ResourceSlot],
+        target_device: DeviceSlot,
+        mount_resource: List[ResourceSlot],
+        collector_mass: List[float],
+        active_material: List[float],
+        capacity: List[float],
+        battery_system: List[str],
+        timeout_seconds: int,
+        assignee_user_ids: list[str],
+        **kwargs
+    ) -> dict:
+        """
+        timeout_seconds: 超时时间（秒），默认3600秒
+        collector_mass: 极流体质量
+        active_material: 活性物质含量
+        capacity: 克容量（mAh/g）
+        battery_system: 电池体系
+        修改的结果无效，是只读的
+        """
+        resource = ResourceTreeSet.from_plr_resources(resource).dump()
+        mount_resource = ResourceTreeSet.from_plr_resources(mount_resource).dump()
+        kwargs.update(locals())
+        kwargs.pop("kwargs")
+        kwargs.pop("self")
+        return kwargs
+
+    @action(
+        description="转移物料",
+        handles=[
+            ActionInputHandle(key="target_device", data_type="device_id",
+                              label="目标设备", data_key="target_device", data_source=DataSource.HANDLE),
+            ActionInputHandle(key="resource", data_type="resource",
+                               label="待转移资源", data_key="resource", data_source=DataSource.HANDLE),
+            ActionInputHandle(key="mount_resource", data_type="resource",
+                               label="目标孔位", data_key="mount_resource", data_source=DataSource.HANDLE),
+        ]
+    )
+    async def transfer(self, resource: List[ResourceSlot], target_device: DeviceSlot, mount_resource: List[ResourceSlot]):
+        future = ROS2DeviceNode.run_async_func(self._ros_node.transfer_resource_to_another, True,
+            **{
+                "plr_resources": resource,
+                "target_device_id": target_device,
+                "target_resources": mount_resource,
+                "sites": [None] * len(mount_resource),
+            })
+        result = await future
+        return result
+
+
+    @action(
+        description="扣电测试启动",
+        handles=[
+            ActionInputHandle(key="resource", data_type="resource",
+                              label="待转移资源", data_key="resource", data_source=DataSource.HANDLE),
+            ActionInputHandle(key="mount_resource", data_type="resource",
+                              label="目标孔位", data_key="mount_resource", data_source=DataSource.HANDLE),
+
+            ActionInputHandle(key="collector_mass", data_type="collector_mass",
+                              label="极流体质量", data_key="collector_mass", data_source=DataSource.HANDLE),
+            ActionInputHandle(key="active_material", data_type="active_material",
+                              label="活性物质含量", data_key="active_material", data_source=DataSource.HANDLE),
+            ActionInputHandle(key="capacity", data_type="capacity",
+                              label="克容量", data_key="capacity", data_source=DataSource.HANDLE),
+            ActionInputHandle(key="battery_system", data_type="battery_system",
+                              label="电池体系", data_key="battery_system", data_source=DataSource.HANDLE),
+        ]
+    )
+    async def test(
+        self, resource: List[ResourceSlot], mount_resource: List[ResourceSlot],  collector_mass: List[float], active_material: List[float], capacity: List[float], battery_system: list[str]
+    ):
+        print(resource)
+        print(mount_resource)
+        print(collector_mass)
+        print(active_material)
+        print(capacity)
+        print(battery_system)
+
+    @action(
+        auto_prefix=True,
+        description="批量准备物料 - 虚拟起始节点, 生成A1-A5物料, 输出5个handle供后续节点使用",
+        handles=[
+            ActionOutputHandle(key="channel_1", data_type="workbench_material",
+                         label="实验1", data_key="material_1", data_source=DataSource.EXECUTOR),
+            ActionOutputHandle(key="channel_2", data_type="workbench_material",
+                         label="实验2", data_key="material_2", data_source=DataSource.EXECUTOR),
+            ActionOutputHandle(key="channel_3", data_type="workbench_material",
+                         label="实验3", data_key="material_3", data_source=DataSource.EXECUTOR),
+            ActionOutputHandle(key="channel_4", data_type="workbench_material",
+                         label="实验4", data_key="material_4", data_source=DataSource.EXECUTOR),
+            ActionOutputHandle(key="channel_5", data_type="workbench_material",
+                         label="实验5", data_key="material_5", data_source=DataSource.EXECUTOR),
+        ],
+    )
     def prepare_materials(
         self,
         sample_uuids: SampleUUIDsType,
@@ -306,19 +435,14 @@ class VirtualWorkbench:
         """
         批量准备物料 - 虚拟起始节点
 
-        作为工作流的起始节点，生成指定数量的物料编号供后续节点使用。
-        输出5个handle (material_1 ~ material_5)，分别对应实验1~5。
-
-        Args:
-            count: 待生成的物料数量，默认5 (生成 A1-A5)
-
-        Returns:
-            PrepareMaterialsResult: 包含 material_1 ~ material_5 用于传递给 move_to_heating_station
+        作为工作流的起始节点, 生成指定数量的物料编号供后续节点使用。
+        输出5个handle (material_1 ~ material_5), 分别对应实验1~5。
         """
-        # 生成物料列表 A1 - A{count}
         materials = [i for i in range(1, count + 1)]
 
-        self.logger.info(f"[准备物料] 生成 {count} 个物料: " f"A1-A{count} -> material_1~material_{count}")
+        self.logger.info(
+            f"[准备物料] 生成 {count} 个物料: A1-A{count} -> material_1~material_{count}"
+        )
 
         return {
             "success": True,
@@ -329,9 +453,28 @@ class VirtualWorkbench:
             "material_4": materials[3] if len(materials) > 3 else 0,
             "material_5": materials[4] if len(materials) > 4 else 0,
             "message": f"已准备 {count} 个物料: A1-A{count}",
-            "unilabos_samples": [LabSample(sample_uuid=sample_uuid, oss_path="", extra={"material_uuid": content} if isinstance(content, str) else content.serialize()) for sample_uuid, content in sample_uuids.items()]
+            "unilabos_samples": [
+                LabSample(
+                    sample_uuid=sample_uuid,
+                    oss_path="",
+                    extra={"material_uuid": content} if isinstance(content, str) else (content.serialize() if content else {}),
+                )
+                for sample_uuid, content in sample_uuids.items()
+            ],
         }
 
+    @action(
+        auto_prefix=True,
+        description="将物料从An位置移动到空闲加热台, 返回分配的加热台ID",
+        handles=[
+            ActionInputHandle(key="material_input", data_type="workbench_material",
+                        label="物料编号", data_key="material_number", data_source=DataSource.HANDLE),
+            ActionOutputHandle(key="heating_station_output", data_type="workbench_station",
+                         label="加热台ID", data_key="station_id", data_source=DataSource.EXECUTOR),
+            ActionOutputHandle(key="material_number_output", data_type="workbench_material",
+                         label="物料编号", data_key="material_number", data_source=DataSource.EXECUTOR),
+        ],
+    )
     def move_to_heating_station(
         self,
         sample_uuids: SampleUUIDsType,
@@ -340,20 +483,12 @@ class VirtualWorkbench:
         """
         将物料从An位置移动到加热台
 
-        多线程并发调用时，会竞争机械臂使用权，并自动查找空闲加热台
-
-        Args:
-            material_number: 物料编号 (1-5)
-
-        Returns:
-            MoveToHeatingStationResult: 包含 station_id, material_number 等用于传递给下一个节点
+        多线程并发调用时, 会竞争机械臂使用权, 并自动查找空闲加热台
         """
-        # 根据物料编号生成物料ID
         material_id = f"A{material_number}"
         task_desc = f"移动{material_id}到加热台"
         self.logger.info(f"[任务] {task_desc} - 开始执行")
 
-        # 记录任务
         with self._tasks_lock:
             self._active_tasks[material_id] = {
                 "status": "waiting_for_arm",
@@ -361,33 +496,27 @@ class VirtualWorkbench:
             }
 
         try:
-            # 步骤1: 等待获取机械臂使用权(竞争)
             with self._tasks_lock:
                 self._active_tasks[material_id]["status"] = "waiting_for_arm"
             self._acquire_arm(task_desc)
 
-            # 步骤2: 查找空闲加热台
             with self._tasks_lock:
                 self._active_tasks[material_id]["status"] = "finding_station"
             station_id = None
 
-            # 循环等待直到找到空闲加热台
             while station_id is None:
                 station_id = self._find_available_heating_station()
                 if station_id is None:
-                    self.logger.info(f"[{material_id}] 没有空闲加热台，等待中...")
-                    # 释放机械臂，等待后重试
+                    self.logger.info(f"[{material_id}] 没有空闲加热台, 等待中...")
                     self._release_arm()
                     time.sleep(0.5)
                     self._acquire_arm(task_desc)
 
-            # 步骤3: 占用加热台 - 立即标记为OCCUPIED，防止其他任务选择同一加热台
             with self._stations_lock:
                 self._heating_stations[station_id].state = HeatingStationState.OCCUPIED
                 self._heating_stations[station_id].current_material = material_id
                 self._heating_stations[station_id].material_number = material_number
 
-            # 步骤4: 模拟机械臂移动操作 (3秒)
             with self._tasks_lock:
                 self._active_tasks[material_id]["status"] = "arm_moving"
                 self._active_tasks[material_id]["assigned_station"] = station_id
@@ -395,11 +524,11 @@ class VirtualWorkbench:
 
             time.sleep(self.ARM_OPERATION_TIME)
 
-            # 步骤5: 放入加热台完成
             self._update_data_status(f"{material_id}已放入加热台{station_id}")
-            self.logger.info(f"[{material_id}] 已放入加热台{station_id} (用时{self.ARM_OPERATION_TIME}s)")
+            self.logger.info(
+                f"[{material_id}] 已放入加热台{station_id} (用时{self.ARM_OPERATION_TIME}s)"
+            )
 
-            # 释放机械臂
             self._release_arm()
 
             with self._tasks_lock:
@@ -412,8 +541,16 @@ class VirtualWorkbench:
                 "material_number": material_number,
                 "message": f"{material_id}已成功移动到加热台{station_id}",
                 "unilabos_samples": [
-                    LabSample(sample_uuid=sample_uuid, oss_path="", extra={"material_uuid": content} if isinstance(content, str) else content.serialize()) for
-                    sample_uuid, content in sample_uuids.items()]
+                    LabSample(
+                        sample_uuid=sample_uuid,
+                        oss_path="",
+                        extra=(
+                            {"material_uuid": content}
+                            if isinstance(content, str) else (content.serialize() if content else {})
+                        ),
+                    )
+                    for sample_uuid, content in sample_uuids.items()
+                ],
             }
 
         except Exception as e:
@@ -427,11 +564,33 @@ class VirtualWorkbench:
                 "material_number": material_number,
                 "message": f"移动失败: {str(e)}",
                 "unilabos_samples": [
-                    LabSample(sample_uuid=sample_uuid, oss_path="", extra={"material_uuid": content} if isinstance(content, str) else content.serialize()) for
-                    sample_uuid, content in sample_uuids.items()]
+                    LabSample(
+                        sample_uuid=sample_uuid,
+                        oss_path="",
+                        extra=(
+                            {"material_uuid": content}
+                            if isinstance(content, str) else (content.serialize() if content else {})
+                        ),
+                    )
+                    for sample_uuid, content in sample_uuids.items()
+                ],
             }
 
-    @always_free
+    @action(
+        auto_prefix=True,
+        always_free=True,
+        description="启动指定加热台的加热程序",
+        handles=[
+            ActionInputHandle(key="station_id_input", data_type="workbench_station",
+                        label="加热台ID", data_key="station_id", data_source=DataSource.HANDLE),
+            ActionInputHandle(key="material_number_input", data_type="workbench_material",
+                        label="物料编号", data_key="material_number", data_source=DataSource.HANDLE),
+            ActionOutputHandle(key="heating_done_station", data_type="workbench_station",
+                         label="加热完成-加热台ID", data_key="station_id", data_source=DataSource.EXECUTOR),
+            ActionOutputHandle(key="heating_done_material", data_type="workbench_material",
+                         label="加热完成-物料编号", data_key="material_number", data_source=DataSource.EXECUTOR),
+        ],
+    )
     def start_heating(
         self,
         sample_uuids: SampleUUIDsType,
@@ -440,13 +599,6 @@ class VirtualWorkbench:
     ) -> StartHeatingResult:
         """
         启动指定加热台的加热程序
-
-        Args:
-            station_id: 加热台ID (1-3)，从 move_to_heating_station 的 handle 传入
-            material_number: 物料编号，从 move_to_heating_station 的 handle 传入
-
-        Returns:
-            StartHeatingResult: 包含 station_id, material_number 等用于传递给下一个节点
         """
         self.logger.info(f"[加热台{station_id}] 开始加热")
 
@@ -458,8 +610,16 @@ class VirtualWorkbench:
                 "material_number": material_number,
                 "message": f"无效的加热台ID: {station_id}",
                 "unilabos_samples": [
-                    LabSample(sample_uuid=sample_uuid, oss_path="", extra={"material_uuid": content} if isinstance(content, str) else content.serialize()) for
-                    sample_uuid, content in sample_uuids.items()]
+                    LabSample(
+                        sample_uuid=sample_uuid,
+                        oss_path="",
+                        extra=(
+                            {"material_uuid": content}
+                            if isinstance(content, str) else (content.serialize() if content else {})
+                        ),
+                    )
+                    for sample_uuid, content in sample_uuids.items()
+                ],
             }
 
         with self._stations_lock:
@@ -473,8 +633,16 @@ class VirtualWorkbench:
                     "material_number": material_number,
                     "message": f"加热台{station_id}上没有物料",
                     "unilabos_samples": [
-                        LabSample(sample_uuid=sample_uuid, oss_path="", extra={"material_uuid": content} if isinstance(content, str) else content.serialize()) for
-                        sample_uuid, content in sample_uuids.items()]
+                        LabSample(
+                            sample_uuid=sample_uuid,
+                            oss_path="",
+                            extra=(
+                                {"material_uuid": content}
+                                if isinstance(content, str) else (content.serialize() if content else {})
+                            ),
+                        )
+                        for sample_uuid, content in sample_uuids.items()
+                    ],
                 }
 
             if station.state == HeatingStationState.HEATING:
@@ -485,13 +653,20 @@ class VirtualWorkbench:
                     "material_number": material_number,
                     "message": f"加热台{station_id}已经在加热中",
                     "unilabos_samples": [
-                        LabSample(sample_uuid=sample_uuid, oss_path="", extra={"material_uuid": content} if isinstance(content, str) else content.serialize()) for
-                        sample_uuid, content in sample_uuids.items()]
+                        LabSample(
+                            sample_uuid=sample_uuid,
+                            oss_path="",
+                            extra=(
+                                {"material_uuid": content}
+                                if isinstance(content, str) else (content.serialize() if content else {})
+                            ),
+                        )
+                        for sample_uuid, content in sample_uuids.items()
+                    ],
                 }
 
             material_id = station.current_material
 
-            # 开始加热
             station.state = HeatingStationState.HEATING
             station.heating_start_time = time.time()
             station.heating_progress = 0.0
@@ -502,7 +677,6 @@ class VirtualWorkbench:
 
         self._update_data_status(f"加热台{station_id}开始加热{material_id}")
 
-        # 打印当前所有正在加热的台位
         with self._stations_lock:
             heating_list = [
                 f"加热台{sid}:{s.current_material}"
@@ -511,7 +685,6 @@ class VirtualWorkbench:
             ]
         self.logger.info(f"[并行加热] 当前同时加热中: {', '.join(heating_list)}")
 
-        # 模拟加热过程
         start_time = time.time()
         last_countdown_log = start_time
         while True:
@@ -524,7 +697,6 @@ class VirtualWorkbench:
 
             self._update_data_status(f"加热台{station_id}加热中: {progress:.1f}%")
 
-            # 每5秒打印一次倒计时
             if time.time() - last_countdown_log >= 5.0:
                 self.logger.info(f"[加热台{station_id}] {material_id} 剩余 {remaining:.1f}s")
                 last_countdown_log = time.time()
@@ -534,7 +706,6 @@ class VirtualWorkbench:
 
             time.sleep(1.0)
 
-        # 加热完成
         with self._stations_lock:
             self._heating_stations[station_id].state = HeatingStationState.COMPLETED
             self._heating_stations[station_id].heating_progress = 100.0
@@ -553,10 +724,28 @@ class VirtualWorkbench:
             "material_number": material_number,
             "message": f"加热台{station_id}加热完成",
             "unilabos_samples": [
-                LabSample(sample_uuid=sample_uuid, oss_path="", extra={"material_uuid": content} if isinstance(content, str) else content.serialize()) for
-                sample_uuid, content in sample_uuids.items()]
+                LabSample(
+                    sample_uuid=sample_uuid,
+                    oss_path="",
+                    extra=(
+                        {"material_uuid": content}
+                        if isinstance(content, str) else (content.serialize() if content else {})
+                    ),
+                )
+                for sample_uuid, content in sample_uuids.items()
+            ],
         }
 
+    @action(
+        auto_prefix=True,
+        description="将物料从加热台移动到输出位置Cn",
+        handles=[
+            ActionInputHandle(key="output_station_input", data_type="workbench_station",
+                        label="加热台ID", data_key="station_id", data_source=DataSource.HANDLE),
+            ActionInputHandle(key="output_material_input", data_type="workbench_material",
+                        label="物料编号", data_key="material_number", data_source=DataSource.HANDLE),
+        ],
+    )
     def move_to_output(
         self,
         sample_uuids: SampleUUIDsType,
@@ -565,15 +754,8 @@ class VirtualWorkbench:
     ) -> MoveToOutputResult:
         """
         将物料从加热台移动到输出位置Cn
-
-        Args:
-            station_id: 加热台ID (1-3)，从 start_heating 的 handle 传入
-            material_number: 物料编号，从 start_heating 的 handle 传入，用于确定输出位置 Cn
-
-        Returns:
-            MoveToOutputResult: 包含执行结果
         """
-        output_number = material_number  # 物料编号决定输出位置
+        output_number = material_number
 
         if station_id not in self._heating_stations:
             return {
@@ -583,8 +765,16 @@ class VirtualWorkbench:
                 "output_position": f"C{output_number}",
                 "message": f"无效的加热台ID: {station_id}",
                 "unilabos_samples": [
-                    LabSample(sample_uuid=sample_uuid, oss_path="", extra={"material_uuid": content} if isinstance(content, str) else content.serialize()) for
-                    sample_uuid, content in sample_uuids.items()]
+                    LabSample(
+                        sample_uuid=sample_uuid,
+                        oss_path="",
+                        extra=(
+                            {"material_uuid": content}
+                            if isinstance(content, str) else (content.serialize() if content else {})
+                        ),
+                    )
+                    for sample_uuid, content in sample_uuids.items()
+                ],
             }
 
         with self._stations_lock:
@@ -599,8 +789,16 @@ class VirtualWorkbench:
                     "output_position": f"C{output_number}",
                     "message": f"加热台{station_id}上没有物料",
                     "unilabos_samples": [
-                        LabSample(sample_uuid=sample_uuid, oss_path="", extra={"material_uuid": content} if isinstance(content, str) else content.serialize()) for
-                        sample_uuid, content in sample_uuids.items()]
+                        LabSample(
+                            sample_uuid=sample_uuid,
+                            oss_path="",
+                            extra=(
+                                {"material_uuid": content}
+                                if isinstance(content, str) else (content.serialize() if content else {})
+                            ),
+                        )
+                        for sample_uuid, content in sample_uuids.items()
+                    ],
                 }
 
             if station.state != HeatingStationState.COMPLETED:
@@ -611,8 +809,16 @@ class VirtualWorkbench:
                     "output_position": f"C{output_number}",
                     "message": f"加热台{station_id}尚未完成加热 (当前状态: {station.state.value})",
                     "unilabos_samples": [
-                        LabSample(sample_uuid=sample_uuid, oss_path="", extra={"material_uuid": content} if isinstance(content, str) else content.serialize()) for
-                        sample_uuid, content in sample_uuids.items()]
+                        LabSample(
+                            sample_uuid=sample_uuid,
+                            oss_path="",
+                            extra=(
+                                {"material_uuid": content}
+                                if isinstance(content, str) else (content.serialize() if content else {})
+                            ),
+                        )
+                        for sample_uuid, content in sample_uuids.items()
+                    ],
                 }
 
         output_position = f"C{output_number}"
@@ -624,18 +830,17 @@ class VirtualWorkbench:
                 if material_id in self._active_tasks:
                     self._active_tasks[material_id]["status"] = "waiting_for_arm_output"
 
-            # 获取机械臂
             self._acquire_arm(task_desc)
 
             with self._tasks_lock:
                 if material_id in self._active_tasks:
                     self._active_tasks[material_id]["status"] = "arm_moving_to_output"
 
-            # 模拟机械臂操作 (3秒)
-            self.logger.info(f"[{material_id}] 机械臂正在从加热台{station_id}取出并移动到{output_position}...")
+            self.logger.info(
+                f"[{material_id}] 机械臂正在从加热台{station_id}取出并移动到{output_position}..."
+            )
             time.sleep(self.ARM_OPERATION_TIME)
 
-            # 清空加热台
             with self._stations_lock:
                 self._heating_stations[station_id].state = HeatingStationState.IDLE
                 self._heating_stations[station_id].current_material = None
@@ -643,17 +848,17 @@ class VirtualWorkbench:
                 self._heating_stations[station_id].heating_progress = 0.0
                 self._heating_stations[station_id].heating_start_time = None
 
-            # 释放机械臂
             self._release_arm()
 
-            # 任务完成
             with self._tasks_lock:
                 if material_id in self._active_tasks:
                     self._active_tasks[material_id]["status"] = "completed"
                     self._active_tasks[material_id]["end_time"] = time.time()
 
             self._update_data_status(f"{material_id}已移动到{output_position}")
-            self.logger.info(f"[{material_id}] 已成功移动到{output_position} (用时{self.ARM_OPERATION_TIME}s)")
+            self.logger.info(
+                f"[{material_id}] 已成功移动到{output_position} (用时{self.ARM_OPERATION_TIME}s)"
+            )
 
             return {
                 "success": True,
@@ -662,8 +867,17 @@ class VirtualWorkbench:
                 "output_position": output_position,
                 "message": f"{material_id}已成功移动到{output_position}",
                 "unilabos_samples": [
-                    LabSample(sample_uuid=sample_uuid, oss_path="", extra={"material_uuid": content} if isinstance(content, str) else content.serialize()) for
-                    sample_uuid, content in sample_uuids.items()]
+                    LabSample(
+                        sample_uuid=sample_uuid,
+                        oss_path="",
+                        extra=(
+                            {"material_uuid": content}
+                            if isinstance(content, str)
+                            else (content.serialize() if content is not None else {})
+                        ),
+                    )
+                    for sample_uuid, content in sample_uuids.items()
+                ],
             }
 
         except Exception as e:
@@ -677,83 +891,105 @@ class VirtualWorkbench:
                 "output_position": output_position,
                 "message": f"移动失败: {str(e)}",
                 "unilabos_samples": [
-                    LabSample(sample_uuid=sample_uuid, oss_path="", extra={"material_uuid": content} if isinstance(content, str) else content.serialize()) for
-                    sample_uuid, content in sample_uuids.items()]
+                    LabSample(
+                        sample_uuid=sample_uuid,
+                        oss_path="",
+                        extra=(
+                            {"material_uuid": content}
+                            if isinstance(content, str) else (content.serialize() if content else {})
+                        ),
+                    )
+                    for sample_uuid, content in sample_uuids.items()
+                ],
             }
 
     # ============ 状态属性 ============
 
     @property
+    @topic_config()
     def status(self) -> str:
         return self.data.get("status", "Unknown")
 
     @property
+    @topic_config()
     def arm_state(self) -> str:
         return self._arm_state.value
 
     @property
+    @topic_config()
     def arm_current_task(self) -> str:
         return self._arm_current_task or ""
 
     @property
+    @topic_config()
     def heating_station_1_state(self) -> str:
         with self._stations_lock:
             station = self._heating_stations.get(1)
             return station.state.value if station else "unknown"
 
     @property
+    @topic_config()
     def heating_station_1_material(self) -> str:
         with self._stations_lock:
             station = self._heating_stations.get(1)
             return station.current_material or "" if station else ""
 
     @property
+    @topic_config()
     def heating_station_1_progress(self) -> float:
         with self._stations_lock:
             station = self._heating_stations.get(1)
             return station.heating_progress if station else 0.0
 
     @property
+    @topic_config()
     def heating_station_2_state(self) -> str:
         with self._stations_lock:
             station = self._heating_stations.get(2)
             return station.state.value if station else "unknown"
 
     @property
+    @topic_config()
     def heating_station_2_material(self) -> str:
         with self._stations_lock:
             station = self._heating_stations.get(2)
             return station.current_material or "" if station else ""
 
     @property
+    @topic_config()
     def heating_station_2_progress(self) -> float:
         with self._stations_lock:
             station = self._heating_stations.get(2)
             return station.heating_progress if station else 0.0
 
     @property
+    @topic_config()
     def heating_station_3_state(self) -> str:
         with self._stations_lock:
             station = self._heating_stations.get(3)
             return station.state.value if station else "unknown"
 
     @property
+    @topic_config()
     def heating_station_3_material(self) -> str:
         with self._stations_lock:
             station = self._heating_stations.get(3)
             return station.current_material or "" if station else ""
 
     @property
+    @topic_config()
     def heating_station_3_progress(self) -> float:
         with self._stations_lock:
             station = self._heating_stations.get(3)
             return station.heating_progress if station else 0.0
 
     @property
+    @topic_config()
     def active_tasks_count(self) -> int:
         with self._tasks_lock:
             return len(self._active_tasks)
 
     @property
+    @topic_config()
     def message(self) -> str:
         return self.data.get("message", "")

unilabos/devices/workstation/README.md

@@ -1,9 +1,5 @@
 # 工作站抽象基类物料系统架构说明
 
-## 设计理念
-
-基于用户需求"请你帮我系统思考一下，工作站抽象基类的物料系统基类该如何构建"，我们最终确定了一个**PyLabRobot Deck为中心**的简化架构。
-
 ### 核心原则
 
 1. **PyLabRobot为物料管理核心**：使用PyLabRobot的Deck系统作为物料管理的基础，利用其成熟的Resource体系

unilabos/devices/workstation/bioyond_studio/bioyond_cell/20251229_多订单返回说明.md

@@ -0,0 +1,113 @@
+# Bioyond Cell 工作站 - 多订单返回示例
+
+本文档说明了 `create_orders` 函数如何收集并返回所有订单的完成报文。
+
+## 问题描述
+
+之前的实现只会等待并返回第一个订单的完成报文，如果有多个订单（例如从 Excel 解析出 3 个订单），只能得到第一个订单的推送信息。
+
+## 解决方案
+
+修改后的 `create_orders` 函数现在会：
+
+1. **提取所有 orderCode**：从 LIMS 接口返回的 `data` 列表中提取所有订单编号
+2. **逐个等待完成**：遍历所有 orderCode，调用 `wait_for_order_finish` 等待每个订单完成
+3. **收集所有报文**：将每个订单的完成报文存入 `all_reports` 列表
+4. **统一返回**：返回包含所有订单报文的 JSON 格式数据
+
+## 返回格式
+
+```json
+{
+    "status": "all_completed",
+    "total_orders": 3,
+    "reports": [
+        {
+            "token": "",
+            "request_time": "2025-12-24T15:32:09.2148671+08:00",
+            "data": {
+                "orderId": "3a1e614d-a082-c44a-60be-68647a35e6f1",
+                "orderCode": "BSO2025122400024",
+                "orderName": "DP20251224001",
+                "status": "30",
+                "workflowStatus": "completed",
+                "usedMaterials": [...]
+            }
+        },
+        {
+            "token": "",
+            "request_time": "2025-12-24T15:32:09.9999039+08:00",
+            "data": {
+                "orderId": "3a1e614d-a0a2-f7a9-9360-610021c9479d",
+                "orderCode": "BSO2025122400025",
+                "orderName": "DP20251224002",
+                "status": "30",
+                "workflowStatus": "completed",
+                "usedMaterials": [...]
+            }
+        },
+        {
+            "token": "",
+            "request_time": "2025-12-24T15:34:00.4139986+08:00",
+            "data": {
+                "orderId": "3a1e614d-a0cd-81ca-9f7f-2f4e93af01cd",
+                "orderCode": "BSO2025122400026",
+                "orderName": "DP20251224003",
+                "status": "30",
+                "workflowStatus": "completed",
+                "usedMaterials": [...]
+            }
+        }
+    ],
+    "original_response": {...}
+}
+```
+
+## 使用示例
+
+```python
+# 调用 create_orders
+result = workstation.create_orders("20251224.xlsx")
+
+# 访问返回数据
+print(f"总订单数: {result['total_orders']}")
+print(f"状态: {result['status']}")
+
+# 遍历所有订单的报文
+for i, report in enumerate(result['reports'], 1):
+    order_data = report.get('data', {})
+    print(f"\n订单 {i}:")
+    print(f"  orderCode: {order_data.get('orderCode')}")
+    print(f"  orderName: {order_data.get('orderName')}")
+    print(f"  status: {order_data.get('status')}")
+    print(f"  使用物料数: {len(order_data.get('usedMaterials', []))}")
+```
+
+## 控制台输出示例
+
+```
+[create_orders] 即将提交订单数量: 3
+[create_orders] 接口返回: {...}
+[create_orders] 等待 3 个订单完成: ['BSO2025122400024', 'BSO2025122400025', 'BSO2025122400026']
+[create_orders] 正在等待第 1/3 个订单: BSO2025122400024
+[create_orders] ✓ 订单 BSO2025122400024 完成
+[create_orders] 正在等待第 2/3 个订单: BSO2025122400025
+[create_orders] ✓ 订单 BSO2025122400025 完成
+[create_orders] 正在等待第 3/3 个订单: BSO2025122400026
+[create_orders] ✓ 订单 BSO2025122400026 完成
+[create_orders] 所有订单已完成，共收集 3 个报文
+实验记录本========================create_orders========================
+返回报文数量: 3
+报文 1: orderCode=BSO2025122400024, status=30
+报文 2: orderCode=BSO2025122400025, status=30
+报文 3: orderCode=BSO2025122400026, status=30
+========================
+```
+
+## 关键改进
+
+1. ✅ **等待所有订单**：不再只等待第一个订单，而是遍历所有 orderCode
+2. ✅ **收集完整报文**：每个订单的完整推送报文都被保存在 `reports` 数组中
+3. ✅ **详细日志**：清晰显示正在等待哪个订单，以及完成情况
+4. ✅ **错误处理**：即使某个订单失败，也会记录其状态信息
+5. ✅ **统一格式**：返回的 JSON 格式便于后续处理和分析

unilabos/devices/workstation/bioyond_studio/bioyond_cell/20260113_JSON配置迁移经验.md

@@ -0,0 +1,204 @@
+# BioyondCellWorkstation JSON 配置迁移经验总结
+
+**日期**: 2026-01-13  
+**目的**: 从 `config.py` 迁移到 JSON 配置文件
+
+---
+
+## 问题背景
+
+原系统通过 `config.py` 管理配置，导致：
+1. HTTP 服务重复启动（父类 `BioyondWorkstation` 和子类都启动）
+2. 配置分散在代码中，不便于管理
+3. 无法通过 JSON 统一配置所有参数
+
+---
+
+## 解决方案：嵌套配置结构
+
+### JSON 结构设计
+
+**正确示例** (嵌套在 `config` 中):
+```json
+{
+  "nodes": [{
+    "id": "bioyond_cell_workstation",
+    "config": {
+      "deck": {...},
+      "protocol_type": [],
+      "bioyond_config": {
+        "api_host": "http://172.16.11.219:44388",
+        "api_key": "8A819E5C",
+        "timeout": 30,
+        "HTTP_host": "172.16.11.206",
+        "HTTP_port": 8080,
+        "debug_mode": false,
+        "material_type_mappings": {...},
+        "warehouse_mapping": {...},
+        "solid_liquid_mappings": {...}
+      }
+    },
+    "data": {}
+  }]
+}
+```
+
+**关键点**：
+- ✅ `bioyond_config` 放在 `config` 中（会传递到 `__init__`）
+- ❌ **不要**放在 `data` 中（`data` 是运行时状态，不会传递）
+
+---
+
+## Python 代码适配
+
+### 1. 修改 `BioyondCellWorkstation.__init__` 签名
+
+**文件**: `bioyond_cell_workstation.py`
+
+```python
+def __init__(self, bioyond_config: dict = None, deck=None, protocol_type=None, **kwargs):
+    """
+    Args:
+        bioyond_config: 从 JSON 加载的配置字典
+        deck: Deck 配置
+        protocol_type: 协议类型
+    """
+    # 验证配置
+    if bioyond_config is None:
+        raise ValueError("需要 bioyond_config 参数")
+    
+    # 保存配置
+    self.bioyond_config = bioyond_config
+    
+    # 设置 HTTP 服务去重标志
+    self.bioyond_config["_disable_auto_http_service"] = True
+    
+    # 调用父类
+    super().__init__(bioyond_config=self.bioyond_config, deck=deck, **kwargs)
+```
+
+### 2. 替换全局变量引用
+
+**修改前**（使用全局变量）:
+```python
+from config import MATERIAL_TYPE_MAPPINGS, WAREHOUSE_MAPPING
+
+def create_sample(self, board_type, ...):
+    carrier_type_id = MATERIAL_TYPE_MAPPINGS[board_type][1]
+    location_id = WAREHOUSE_MAPPING[warehouse_name]["site_uuids"][location_code]
+```
+
+**修改后**（从配置读取）:
+```python
+def create_sample(self, board_type, ...):
+    carrier_type_id = self.bioyond_config['material_type_mappings'][board_type][1]
+    location_id = self.bioyond_config['warehouse_mapping'][warehouse_name]["site_uuids"][location_code]
+```
+
+### 3. 修复父类配置访问
+
+在 `station.py` 中安全访问配置默认值：
+
+```python
+# 修改前（会 KeyError）
+self._http_service_config = {
+    "host": bioyond_config.get("http_service_host", HTTP_SERVICE_CONFIG["http_service_host"])
+}
+
+# 修改后（安全访问）
+self._http_service_config = {
+    "host": bioyond_config.get("http_service_host", HTTP_SERVICE_CONFIG.get("http_service_host", ""))
+}
+```
+
+---
+
+## 常见陷阱
+
+### ❌ 错误1：将配置放在 `data` 字段
+```json
+"config": {"deck": {...}},
+"data": {"bioyond_config": {...}}  // ❌ 不会传递到 __init__
+```
+
+### ❌ 错误2：扁平化配置（已废弃方案）
+虽然扁平化也能工作，但不推荐：
+```json
+"config": {
+  "deck": {...},
+  "api_host": "...",     // ❌ 不够清晰
+  "api_key": "...",
+  "HTTP_host": "..."
+}
+```
+
+### ❌ 错误3：忘记替换全局变量引用
+代码中直接使用 `MATERIAL_TYPE_MAPPINGS` 等全局变量会导致 `NameError`。
+
+---
+
+## 云端同步注意事项
+
+使用 `--upload_registry` 时，云端配置可能覆盖本地配置：
+- 首次上传时确保 JSON 完整
+- 或使用新的 `ak/sk` 避免旧配置干扰
+- 调试时可暂时移除 `--upload_registry` 参数
+
+---
+
+## 验证清单
+
+启动成功后应看到：
+```
+✅ 从 JSON 配置加载 bioyond_config 成功
+   API Host: http://...
+   HTTP Service: ...
+✅ BioyondCellWorkstation 初始化完成
+Loaded ResourceTreeSet with ... nodes
+```
+
+运行时不应出现：
+- ❌ `NameError: name 'MATERIAL_TYPE_MAPPINGS' is not defined`
+- ❌ `KeyError: 'http_service_host'`
+- ❌ `bioyond_config 缺少必需参数`
+
+---
+
+## 调试经验
+
+1. **添加调试日志**查看参数传递链路：
+   - `graphio.py`: JSON 加载后的 config 内容
+   - `initialize_device.py`: `device_config.res_content.config` 的键
+   - `bioyond_cell_workstation.py`: `__init__` 接收到的参数
+
+2. **config vs data 区别**：
+   - `config`: 初始化参数，传递给 `__init__`
+   - `data`: 运行时状态，不传递给 `__init__`
+
+3. **参数名必须匹配**：
+   - JSON 中的键名必须与 `__init__` 参数名完全一致
+
+4. **调试代码清理**：完成后记得删除调试日志（🔍 DEBUG 标记）
+
+---
+
+## 修改文件清单
+
+| 文件 | 修改内容 |
+|------|----------|
+| `yibin_electrolyte_config.json` | 创建嵌套 `config.bioyond_config` 结构 |
+| `bioyond_cell_workstation.py` | 修改 `__init__` 接收 `bioyond_config`，替换所有全局变量引用 |
+| `station.py` | 安全访问 `HTTP_SERVICE_CONFIG` 默认值 |
+
+---
+
+## 参考代码位置
+
+- JSON 配置示例: `yibin_electrolyte_config.json` L12-L353
+- `__init__` 实现: `bioyond_cell_workstation.py` L39-L94
+- 全局变量替换示例: `bioyond_cell_workstation.py` L2005, L1863, L1966
+- HTTP 服务配置: `station.py` L629-L634
+
+---
+
+**总结**: 使用嵌套结构将所有配置放在 `config.bioyond_config` 中，修改 `__init__` 直接接收该参数，并替换所有全局变量引用为 `self.bioyond_config` 访问。

unilabos/devices/workstation/bioyond_studio/bioyond_cell/20260113_配置迁移修改总结.md

@@ -0,0 +1,312 @@
+# BioyondCell 配置迁移修改总结
+
+**日期**: 2026-01-13  
+**目标**: 从 `config.py` 完全迁移到 JSON 配置，消除所有全局变量依赖
+
+---
+
+## 📋 修改概览
+
+本次修改完成了 BioyondCell 模块从 Python 配置文件到 JSON 配置的完整迁移，并清理了所有对 `config.py` 全局变量的依赖。
+
+### 核心成果
+
+- ✅ 完全移除对 `config.py` 的导入依赖
+- ✅ 使用嵌套 JSON 结构 `config.bioyond_config`
+- ✅ 修复 7 处 `bioyond_cell_workstation.py` 中的全局变量引用
+- ✅ 修复 3 处其他文件中的全局变量引用
+- ✅ HTTP 服务去重机制完善
+- ✅ 系统成功启动并正常运行
+
+---
+
+## 🔧 修改文件清单
+
+### 1. JSON 配置文件
+
+**文件**: `yibin_electrolyte_config.json`
+
+**修改**:
+- 采用嵌套结构将所有配置放在 `config.bioyond_config` 中
+- 包含：`api_host`, `api_key`, `HTTP_host`, `HTTP_port`, `material_type_mappings`, `warehouse_mapping`, `solid_liquid_mappings` 等
+
+**示例结构**:
+```json
+{
+  "nodes": [{
+    "id": "bioyond_cell_workstation",
+    "config": {
+      "deck": {...},
+      "protocol_type": [],
+      "bioyond_config": {
+        "api_host": "http://172.16.11.219:44388",
+        "api_key": "8A819E5C",
+        "HTTP_host": "172.16.11.206",
+        "HTTP_port": 8080,
+        "material_type_mappings": {...},
+        "warehouse_mapping": {...},
+        "solid_liquid_mappings": {...}
+      }
+    }
+  }]
+}
+```
+
+---
+
+### 2. bioyond_cell_workstation.py
+
+**位置**: `unilabos/devices/workstation/bioyond_studio/bioyond_cell/bioyond_cell_workstation.py`
+
+#### 修改 A: `__init__` 方法签名 (L39-99)
+
+**修改前**:
+```python
+def __init__(self, deck=None, protocol_type=None, **kwargs):
+    # 从 kwargs 收集配置字段
+    self.bioyond_config = {}
+    for field in bioyond_field_names:
+        if field in kwargs:
+            self.bioyond_config[field] = kwargs.pop(field)
+```
+
+**修改后**:
+```python
+def __init__(self, bioyond_config: dict = None, deck=None, protocol_type=None, **kwargs):
+    """直接接收 bioyond_config 参数"""
+    if bioyond_config is None:
+        raise ValueError("需要 bioyond_config 参数")
+    
+    self.bioyond_config = bioyond_config
+    
+    # 设置 HTTP 服务去重标志
+    self.bioyond_config["_disable_auto_http_service"] = True
+    
+    super().__init__(bioyond_config=self.bioyond_config, deck=deck, **kwargs)
+```
+
+#### 修改 B: 替换全局变量引用 (7 处)
+
+| 位置 | 原代码 | 修改后 |
+|------|--------|--------|
+| L2005 | `MATERIAL_TYPE_MAPPINGS[board_type][1]` | `self.bioyond_config['material_type_mappings'][board_type][1]` |
+| L2006 | `MATERIAL_TYPE_MAPPINGS[bottle_type][1]` | `self.bioyond_config['material_type_mappings'][bottle_type][1]` |
+| L2009 | `WAREHOUSE_MAPPING` | `self.bioyond_config['warehouse_mapping']` |
+| L2013 | `WAREHOUSE_MAPPING[warehouse_name]` | `self.bioyond_config['warehouse_mapping'][warehouse_name]` |
+| L2017 | `WAREHOUSE_MAPPING[warehouse_name]["site_uuids"]` | `self.bioyond_config['warehouse_mapping'][warehouse_name]["site_uuids"]` |
+| L1863 | `SOLID_LIQUID_MAPPINGS.get(material_name)` | `self.bioyond_config.get('solid_liquid_mappings', {}).get(material_name)` |
+| L1966, L1976 | `MATERIAL_TYPE_MAPPINGS.items()` | `self.bioyond_config['material_type_mappings'].items()` |
+
+---
+
+### 3. station.py
+
+**位置**: `unilabos/devices/workstation/bioyond_studio/station.py`
+
+#### 修改 A: 删除 config 导入 (L26-28)
+
+**修改前**:
+```python
+from unilabos.devices.workstation.bioyond_studio.config import (
+    API_CONFIG, WORKFLOW_MAPPINGS, MATERIAL_TYPE_MAPPINGS, WAREHOUSE_MAPPING, HTTP_SERVICE_CONFIG
+)
+```
+
+**修改后**:
+```python
+# 已删除此导入
+```
+
+#### 修改 B: `_create_communication_module` 方法 (L691-702)
+
+**修改前**:
+```python
+def _create_communication_module(self, config: Optional[Dict[str, Any]] = None) -> None:
+    default_config = {
+        **API_CONFIG,
+        "workflow_mappings": WORKFLOW_MAPPINGS,
+        "material_type_mappings": MATERIAL_TYPE_MAPPINGS,
+        "warehouse_mapping": WAREHOUSE_MAPPING
+    }
+    if config:
+        self.bioyond_config = {**default_config, **config}
+    else:
+        self.bioyond_config = default_config
+```
+
+**修改后**:
+```python
+def _create_communication_module(self, config: Optional[Dict[str, Any]] = None) -> None:
+    """创建Bioyond通信模块"""
+    # 使用传入的 config 参数（来自 bioyond_config）
+    # 不再依赖全局变量 API_CONFIG 等
+    if config:
+        self.bioyond_config = config
+    else:
+        # 如果没有传入配置，创建空配置（用于测试或兼容性）
+        self.bioyond_config = {}
+    
+    self.hardware_interface = BioyondV1RPC(self.bioyond_config)
+```
+
+#### 修改 C: HTTP 服务配置 (L627-632)
+
+**修改前**:
+```python
+self._http_service_config = {
+    "host": bioyond_config.get("http_service_host", HTTP_SERVICE_CONFIG.get("http_service_host", "")),
+    "port": bioyond_config.get("http_service_port", HTTP_SERVICE_CONFIG.get("http_service_port", 0))
+}
+```
+
+**修改后**:
+```python
+self._http_service_config = {
+    "host": bioyond_config.get("http_service_host", bioyond_config.get("HTTP_host", "")),
+    "port": bioyond_config.get("http_service_port", bioyond_config.get("HTTP_port", 0))
+}
+```
+
+---
+
+### 4. bioyond_rpc.py
+
+**位置**: `unilabos/devices/workstation/bioyond_studio/bioyond_rpc.py`
+
+#### 修改 A: 删除 config 导入 (L12)
+
+**修改前**:
+```python
+from unilabos.devices.workstation.bioyond_studio.config import LOCATION_MAPPING
+```
+
+**修改后**:
+```python
+# 已删除此导入
+```
+
+#### 修改 B: `material_outbound` 方法 (L278-280)
+
+**修改前**:
+```python
+def material_outbound(self, material_id: str, location_name: str, quantity: int) -> dict:
+    """指定库位出库物料（通过库位名称）"""
+    location_id = LOCATION_MAPPING.get(location_name, location_name)
+```
+
+**修改后**:
+```python
+def material_outbound(self, material_id: str, location_name: str, quantity: int) -> dict:
+    """指定库位出库物料（通过库位名称）"""
+    # location_name 参数实际上应该直接是 location_id (UUID)
+    location_id = location_name
+```
+
+**说明**: `LOCATION_MAPPING` 在 `config-0113.py` 中本来就是空字典 `{}`，所以直接使用 `location_name` 逻辑等价。
+
+---
+
+## 🎯 关键设计决策
+
+### 1. 嵌套 vs 扁平配置
+
+**选择**: 嵌套结构 `config.bioyond_config`
+
+**理由**:
+- ✅ 语义清晰，配置分组明确
+- ✅ 参数传递直观，直接对应 `__init__` 参数
+- ✅ 易于维护，不需要硬编码字段列表
+- ✅ 符合 UniLab 设计模式
+
+### 2. HTTP 服务去重
+
+**实现**: 子类设置 `_disable_auto_http_service` 标志
+
+```python
+# bioyond_cell_workstation.py
+self.bioyond_config["_disable_auto_http_service"] = True
+
+# station.py (post_init)
+if self.bioyond_config.get("_disable_auto_http_service"):
+    logger.info("子类已自行管理HTTP服务，跳过自动启动")
+    return
+```
+
+### 3. 全局变量替换策略
+
+**原则**: 所有配置从 `self.bioyond_config` 获取
+
+**模式**:
+```python
+# 修改前
+from config import MATERIAL_TYPE_MAPPINGS
+carrier_type_id = MATERIAL_TYPE_MAPPINGS[board_type][1]
+
+# 修改后
+carrier_type_id = self.bioyond_config['material_type_mappings'][board_type][1]
+```
+
+---
+
+## ✅ 验证结果
+
+### 启动成功日志
+```
+✅ 从 JSON 配置加载 bioyond_config 成功
+   API Host: http://172.16.11.219:44388
+   HTTP Service: 172.16.11.206:8080
+🔧 已设置 _disable_auto_http_service 标志，防止 HTTP 服务重复启动
+✅ BioyondCellWorkstation 初始化完成
+Loaded ResourceTreeSet with 1 trees, 1785 total nodes
+```
+
+### 功能验证
+- ✅ 订单创建 (`create_orders_v2`)
+- ✅ 质量比计算
+- ✅ 物料转移 (`transfer_3_to_2_to_1`)
+- ✅ HTTP 报送接收 (step_finish, sample_finish, order_finish)
+- ✅ 等待机制 (`wait_for_order_finish`)
+- ✅ 仓库 UUID 映射
+- ✅ 物料类型映射
+
+---
+
+## 📚 相关文档
+
+- **配置迁移经验**: `2026-01-13_JSON配置迁移经验.md`
+- **任务清单**: `C:\Users\AndyXie\.gemini\antigravity\brain\...\task.md`
+- **实施计划**: `C:\Users\AndyXie\.gemini\antigravity\brain\...\implementation_plan.md`
+
+---
+
+## ⚠️ 注意事项
+
+### 其他工作站模块
+
+以下文件仍在使用 `config.py` 全局变量（未包含在本次修改中）:
+- `reaction_station.py` - 使用 `API_CONFIG`
+- `experiment.py` - 使用 `API_CONFIG`, `WORKFLOW_MAPPINGS`, `MATERIAL_TYPE_MAPPINGS`
+- `dispensing_station.py` - 使用 `API_CONFIG`, `WAREHOUSE_MAPPING`
+- `station.py` L176, L177, L529, L530 - 动态导入 `WAREHOUSE_MAPPING`
+
+**建议**: 后续可以统一迁移这些模块到 JSON 配置。
+
+### config.py 文件
+
+`config.py` 文件已恢复但**不再被 bioyond_cell 使用**。可以：
+- 保留作为其他模块的参考
+- 或者完全删除（如果其他模块也迁移完成）
+
+---
+
+## 🚀 下一步建议
+
+1. **清理调试代码** ✅ (已完成)
+2. **提交代码到 Git**
+3. **迁移其他工作站模块** (可选)
+4. **更新文档和启动脚本**
+
+---
+
+**修改完成日期**: 2026-01-13  
+**系统状态**: ✅ 稳定运行